Re: [Bacula-users] ongoing problems with v 9.0.3
On 06/14/18 01:00, Jerry Lowry wrote: > Hi, > > Each time I have to change a disk during my offsite backups I get errors > from the job that is running and it fails. My storage and pool > definitions follow below, they have not changed for the last 10 years > and have been working without any error or problems up until I upgraded > to 9.0.3 of bacula and migrated the database to MariaDB 10.2.8-1. > If any other configuration files are needed I can add them. I loose > data on each of these backups because of these errors. If this configuration was working for you before, it is likely you are running into a volume-change bug that was fixed in, I think, 9.0.4 in which Bacula polled the storage device thousands of times a second during volume changes and failed out the job. You should update to 9.0.6 or later and retry. -- Phil Stracchino Babylon Communications ph...@caerllewys.net p...@co.ordinate.org Landline: +1.603.293.8485 Mobile: +1.603.998.6958 -- Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] ongoing problems with v 9.0.3
Hello,
One "feature" recently added was for Bacula to detect an out of
space condition on the partition it is writing. When this
happens, it is pretty much catastrophic since no matter what
Bacula does it cannot add additional space. This is what is
happening to you. You mention that you "have to change a disk"
but do not give any details. It might be possible that previous
versions allowed you to simply swap out disks, and if that was the
case, it would help to know exactly what you were doing and what
kind of "swappable" disks you were using.
One small point: strictly you do not lose data on these backups
that fail, but the backups do fail and thus all your data is not
saved.
Best regards,
Kern
On 06/14/2018 07:00 AM, Jerry Lowry wrote:
Hi,
Each time I have to change a disk during my offsite backups
I get errors from the job that is running and it fails. My
storage and pool definitions follow below, they have not
changed for the last 10 years and have been working without
any error or problems up until I upgraded to 9.0.3 of bacula
and migrated the database to MariaDB 10.2.8-1.
If any other configuration files are needed I can add
them. I loose data on each of these backups because of these
errors.
Any help with this would be great,
thanks,
jerry
# Definition of file storage device
Storage {
Name = midswap # offsite disk
# Do not use "localhost" here
#Address = kilchis # N.B. Use a fully
qualified name here
Address = kilchis # N.B. Use a fully qualified
name here
SDPort = 9103
Password = ""
Device = MidSwap
Media Type = File
}
# File Pool definition
Pool {
Name = OffsiteMid
Pool Type = Copy
Next Pool = OffsiteMid
Storage = midswap
Recycle = yes # Bacula can
automatically recycle Volumes
AutoPrune = yes # Prune expired volumes
Volume Retention = 30 years # thirty years
Maximum Volume Bytes = 1800G # Limit Volume to disk
size
Maximum Volumes = 10 # Limit number of Volumes
in Pool
}
---
emails
sent at disk full message:
13-Jun
17:52 kilchis JobId 37853: Job
BackupUsers.2018-06-12_23.47.07_32 is waiting. Cannot find
any appendable
volumes.
Please
use the "label" command to create a new
Volume for:
Storage: "MidSwap" (/MidSwap)
Pool: OffsiteMid
Media
type: File
13-Jun 17:52 kilchis JobId 37851: Fatal error: Out of
freespace caused End of Volume "homeMS-5" at 981661189531 on
device
"MidSwap" (/MidSwap). Write of 64512 bytes got 10853.
13-Jun
17:52 kilchis JobId 37851: Elapsed time=02:59:41,
Transfer rate=67.40 M Bytes/second
12-Jun
23:47 kilchis-dir JobId 37850: Copying using
JobId=37780 Job=BackupUsers.2018-06-09_20.05.00_18
13-Jun
14:52 kilchis-dir JobId 37850: Start Copying JobId
37850, Job=CopyHMDiskToDisk.2018-06-12_23.47.07_29
13-Jun
14:52 kilchis-dir JobId 37850: Using Device
"Home" to read.
13-Jun
14:52 kilchis JobId 37850: Ready to read from
volume "home-6" on File device "Home" (/engineering/Home).
13-Jun
14:52 kilchis JobId 37850: Forward spacing Volume
"home-6" to addr=824369125834 13-Jun 17:39 kilchis JobId
37850: End
of Volume "home-6" at addr=1503238496266 on device "Home"
(/engineering/Home).
13-Jun
17:39 kilchis JobId 37850: Ready to read from
volume "home-7" on File device "Home" (/engineering/Home).
13-Jun
17:39 kilchis JobId 37850: Forward spacing Volume
"home-7" to addr=215 13-Jun 17:52 kilchis JobId 37850:
Error:
bsock.c:649 Write error sending 65540 bytes to client:10.20.10.21:9103:
ERR=Connection reset by peer 13-Jun 17:52 kilchis JobId
37850: Fatal error:
[Bacula-users] ongoing problems with v 9.0.3
Hi,
Each time I have to change a disk during my offsite backups I get errors
from the job that is running and it fails. My storage and pool definitions
follow below, they have not changed for the last 10 years and have been
working without any error or problems up until I upgraded to 9.0.3 of
bacula and migrated the database to MariaDB 10.2.8-1.
If any other configuration files are needed I can add them. I loose data
on each of these backups because of these errors.
Any help with this would be great,
thanks,
jerry
# Definition of file storage device
Storage {
Name = midswap# offsite disk
# Do not use "localhost" here
#Address = kilchis# N.B. Use a fully qualified name here
Address = kilchis # N.B. Use a fully qualified name here
SDPort = 9103
Password = ""
Device = MidSwap
Media Type = File
}
# File Pool definition
Pool {
Name = OffsiteMid
Pool Type = Copy
Next Pool = OffsiteMid
Storage = midswap
Recycle = yes # Bacula can automatically recycle
Volumes
AutoPrune = yes # Prune expired volumes
Volume Retention = 30 years # thirty years
Maximum Volume Bytes = 1800G # Limit Volume to disk size
Maximum Volumes = 10 # Limit number of Volumes in Pool
}
---
emails sent at disk full message:
13-Jun 17:52 kilchis JobId 37853: Job BackupUsers.2018-06-12_23.47.07_32 is
waiting. Cannot find any appendable volumes.
Please use the "label" command to create a new Volume for:
Storage: "MidSwap" (/MidSwap)
Pool: OffsiteMid
Media type: File
13-Jun 17:52 kilchis JobId 37851: Fatal error: Out of freespace caused End
of Volume "homeMS-5" at 981661189531 on device "MidSwap" (/MidSwap). Write
of 64512 bytes got 10853.
13-Jun 17:52 kilchis JobId 37851: Elapsed time=02:59:41, Transfer
rate=67.40 M Bytes/second
12-Jun 23:47 kilchis-dir JobId 37850: Copying using JobId=37780
Job=BackupUsers.2018-06-09_20.05.00_18
13-Jun 14:52 kilchis-dir JobId 37850: Start Copying JobId 37850,
Job=CopyHMDiskToDisk.2018-06-12_23.47.07_29
13-Jun 14:52 kilchis-dir JobId 37850: Using Device "Home" to read.
13-Jun 14:52 kilchis JobId 37850: Ready to read from volume "home-6" on
File device "Home" (/engineering/Home).
13-Jun 14:52 kilchis JobId 37850: Forward spacing Volume "home-6" to
addr=824369125834 13-Jun 17:39 kilchis JobId 37850: End of Volume "home-6"
at addr=1503238496266 on device "Home" (/engineering/Home).
13-Jun 17:39 kilchis JobId 37850: Ready to read from volume "home-7" on
File device "Home" (/engineering/Home).
13-Jun 17:39 kilchis JobId 37850: Forward spacing Volume "home-7" to
addr=215 13-Jun 17:52 kilchis JobId 37850: Error: bsock.c:649 Write error
sending 65540 bytes to client:10.20.10.21:9103: ERR=Connection reset by
peer 13-Jun 17:52 kilchis JobId 37850: Fatal error: read.c:277 Error
sending to File daemon. ERR=Connection reset by peer 13-Jun 17:52 kilchis
JobId 37850: Elapsed time=02:59:42, Transfer rate=67.39 M Bytes/second
13-Jun 17:52 kilchis JobId 37850: Error: bsock.c:537 Socket has errors=1 on
call to client:10.20.10.21:9103 13-Jun 17:52 kilchis JobId 37850: Error:
bsock.c:537 Socket has errors=1 on call to client:10.20.10.21:9103 13-Jun
17:52 kilchis-dir JobId 37850: Error: Bacula kilchis-dir 9.0.6 (20Nov17):
Build OS: x86_64-pc-linux-gnu redhat
Prev Backup JobId: 37780
Prev Backup Job:BackupUsers.2018-06-09_20.05.00_18
New Backup JobId: 37851
Current JobId: 37850
Current Job:CopyHMDiskToDisk.2018-06-12_23.47.07_29
Backup Level: Full
Client: kilchis-fd
FileSet:"Mid Set" 2011-04-11 13:13:32
Read Pool: "HomePool" (From Command input)
Read Storage: "home" (From Job resource)
Write Pool: "OffsiteMid" (From Command input)
Write Storage: "midswap" (From Command input)
Catalog:"MyCatalog" (From Client resource)
Start time: 13-Jun-2018 14:52:20
End time: 13-Jun-2018 17:52:04
Elapsed time: 2 hours 59 mins 44 secs
Priority: 10
SD Files Written: 1,784,587
SD Bytes Written: 726,665,971,203 (726.6 GB)
Rate: 67383.7 KB/s
Volume name(s): homeMS-5
Volume Session Id: 82
Volume Session Time:1528397911
Last Volume Bytes: 981,661,189,531 (981.6 GB)
SD Errors: 3
SD termination status: Error
Termination:*** Copying Error ***
--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot___
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
