On Mon, Jun 16, 2014 at 11:41:20AM +0400, Antony Pavlov wrote:
> ENC28J60 is a stand-alone Ethernet controller with SPI Interface.
> and integrated 10BASE-T PHY.
>
> This driver was ported from linux-3.15.
>
> The most notable barebox driver version changes:
> * add device tree support;
> * use IF_ENABLED for checking CONFIG_ENC28J60_WRITEVERIFY;
> * add mii_bus support;
> * rename {nolock,locked}_regw_{read,write}() to enc28j60_*_{read,write}().
>
> TODOs:
> * receive only one packet per enc28j60_eth_rx() call.
> * fix empty enc28j60_init_dev;
> * add parameter for changing debug loglevel on-the-run;
> * ENC28J60 supports only SPI mode 0 so we have to submit
> this information to the SPI controller explicitly.
>
> Signed-off-by: Antony Pavlov <antonynpav...@gmail.com>
>
> Changes since v1:
> * drop unused macros;
> * use random_ether_addr();
> * drop 'select CRC32' in Kconfig;
> * drop MAC address generation in driver's code;
> * rename {nolock,locked}_regw_{read,write}() to enc28j60_*_{read,write}();
> * add mii_bus support.
>
> Signed-off-by: Antony Pavlov <antonynpav...@gmail.com>
...
> diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
> new file mode 100644
> index 0000000..4884854
I don't really like the headerfile leaking in from Linux just to make
this driver compile. Also I think such a fine grained network device
debugging is not so useful for barebox. So can you drop this? Otherwise
I'm fine with the driver.
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
