Hi, I wanted to reactive my old beagleboard-xm. So I went ahead and tried installing the lastest Ubuntu from [1]. Unfortunately after the installation the board hangs in a bootloop. I then tried to install Archlinux from [2] with the same effect. After that I tried installing Ubuntu 12.04 which worked. But after doing a release upgrade to Ubuntu 14.04 the bootloop reappeared.
This is what I get on the serial console: ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Loading Ramdisk to 9eb50000, end 9ef27c8f ... OK Using Device Tree in place at 88000000, end 88012696 Starting kernel ... [ 0.000610] WARNING: Your 'console=ttyO2' has been replaced by 'ttyS2' [ 0.000640] This ensures that you still see kernel messages. Please [ 0.000640] update your kernel commandline. [ 0.840972] platform 48058000.ssi-controller: Cannot lookup hwmod 'ssi' [ 0.844390] of_amba_device_create(): amba_device_add() failed (-19) for /etb@5401b000 [ 0.844543] of_amba_device_create(): amba_device_add() failed (-19) for /etm@54010000 [ 2.899475] Error: Driver 'tfp410' is already registered, aborting... [ 3.022705] ehci-omap 48064800.ehci: Can't get PHY device for port 1: -517 [ 3.122650] omap2_set_init_voltage: unable to find boot up OPP for vdd_mpu_iva [ 3.129913] omap2_set_init_voltage: unable to set vdd_mpu_iva [ 3.136108] omap2_set_init_voltage: unable to find boot up OPP for vdd_core [ 3.143188] omap2_set_init_voltage: unable to set vdd_core U-Boot SPL 2015.01-00011-g2efed9f (Jan 12 2015 - 17:15:10) SPL: Please implement spl_start_uboot() for your board SPL: Direct Linux boot not active! reading u-boot.img reading u-boot.img U-Boot 2015.01-00011-g2efed9f (Jan 12 2015 - 17:15:10), Build: jenkins-github_Bootloader-Builder-90 OMAP3630/3730-GP ES1.1, CPU-OPP2, L3-200MHz, Max CPU Clock 1 Ghz OMAP3 Beagle board + LPDDR/NAND I2C: ready DRAM: 512 MiB NAND: 256 MiB MMC: OMAP SD/MMC: 0 *** Warning - bad CRC, using default environment Beagle xM Rev A/B No EEPROM on expansion board No EEPROM on expansion board Die ID #59da00011ff00000015739eb0c019006 Net: usb_ether Error: usb_ether address not set. Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0 is current device SD/MMC found on device 0 Checking for: /uEnv.txt ... Checking for: /boot/uEnv.txt ... 115 bytes read in 33 ms (2.9 KiB/s) Loaded environment from /boot/uEnv.txt Checking if uname_r is set in /boot/uEnv.txt... Running uname_boot ... loading /boot/vmlinuz-3.19.0-armv7-x3 ... 5185800 bytes read in 355 ms (13.9 MiB/s) loading /boot/dtbs/3.19.0-armv7-x3/omap3-beagle-xm-ab.dtb ... 63127 bytes read in 102 ms (603.5 KiB/s) loading /boot/initrd.img-3.19.0-armv7-x3 ... 4029583 bytes read in 276 ms (13.9 MiB/s) debug: [console=ttyO2,115200n8 root=/dev/mmcblk0p2 ro rootfstype=ext4 rootwait fixrtc quiet] ... debug: [bootz 0x82000000 0x88080000:3d7c8f 0x88000000] ... Kernel image @ 0x82000000 [ 0x000000 - 0x4f2108 ] ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Loading Ramdisk to 9eb50000, end 9ef27c8f ... OK Using Device Tree in place at 88000000, end 88012696 Any ideas? [1] http://elinux.org/BeagleBoardUbuntu#Beagle.2FBeagle_xM [2] http://archlinuxarm.org/platforms/armv7/ti/beagleboard-xm -- regards alex -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.