Hi, I'm currently try to run a bare metal application which works fine on the BBB on my new PocketBeagle. MLO bootloader works as expected, it loads the main application image to addres 0x80000000. But when it jumps to this address to execute the main application, the whole board stalls.
This lets me think some of the basic hardware initialisations done by the bootloader do fit for BBB, but not for PocketBeagle. So my question: are there some fundamental differences between both? Does the Octavo-internal RAM need a different timing than the one on BBB? If yes: what exactly is different? Or what else needs to be low-level initialised in a different way? Thanks! Mike -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/5b3b15bc-219d-467e-847b-382e68ca5ad2%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.