Hi, everybody! I am having trouble trying to use machinekit, config-pin and a non default pinmux state. What I want to do is to configure P9_27 and P9_92 to be used by the quadrature encoder peripheral and leave P9_25 alone. If I use config-pin to configure it to qep, it disables by default pull up, which I need, since I didn't include it in my custom PCB. If I use a custom device tree to setup QEP, all pins are claimed and I cant use P9_25 throgh machinekit, as IO. I guess I could use a memdev like program to enable it by hand. I did it in the past, but, I feel that it is the cheaters way to do it. I never really understood device tree, it was always trial and error or raw memory RW with me :/
In help is very welcome. Thanks in advance. Paulo Sherring. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/ebd23058-edb7-4a0e-aa82-6481e95840b7%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.