Hello, I noticed that PWM, P8_13, on the BBBW is having issues with the Adafruit_BBIO framework. I have this software I found within a book I purchased, "Getting Started with BeagleBone" (Richardson 2014). Anyway, The software works without me using PWM but I would like to use PWM to make a LED go bright to dim just by using the web page format found via Flask (a Python Module).
So, here is the software: from flask import Flask, render_template app = Flask(__name__) import Adafruit_BBIO.GPIO as GPIO import Adafruit_BBIO.PWM as PWM PWM.start("P8_13", 0.0) @app.route("/") def hello(): if GPIO.input(P8_11): doorStatus = "open" else: doorStatus = "closed" templateData = { 'doorStatus': doorStatus, } return render_template('main-door.html', **templateData) @app.route('/ledLevel/<level>') def pin_state(level): PWM.set_duty_cycle("P8_13", float(level)) return "LED level set to " + "." if __name__ == "__main__": app.run(host='192.168.7.2', port=5000, debug=True) So, please give advice or if you are using Adafruit_BBIO, please allow me some "behind-the-scenes" look at the software to change to get things "cracking." Seth P.S. I am sure there is a cure. Direct me to the software and I can start on it. I found a link to the sourceforge items and software. Is this where I should begin? -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/6bc9ae11-66dc-4616-ba20-9d9bcb174c05%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.