Re: [beagleboard] Re: BBB DPLL boot problem

2015-08-10 Thread Fabio Mantelli 
Nothing is plugged in, and no program is running at all for my tests.

2015-08-07 23:40 GMT-03:00 evilwulfie :

> i can see that if your running full tilt MHZ with ethernet plugged in
> it runs a bit below 500ma normally
>
> whats running and whats the cpu load ?
>
>
> On 8/7/2015 11:24 AM, fabiohmante...@gmail.com wrote:
>
> Well, by no apparent reason at all, by the third day my BBB rose from the
> dead and started booting again. No strange boot messages, like as if
> nothing happened. However, 600mA current is being pulled by the BBB from
> the power source with nothing connected to it, which I find strange. Any
> ideas?
>
> On Wednesday, August 5, 2015 at 7:13:20 PM UTC-3, fabiohm...@gmail.com
> wrote:
>>
>> Hey guys, new user here. I got an issue with my BBB and I thought maybe
>> somebody here could help me.
>>
>> After fiddling around with my bbb debugging a custom made cape, it
>> stopped booting at all. When I plug in a serial debug cable to read the
>> boot messages i get the following:
>>
>> U-Boot SPL 2014.04-00014-g47880f5 (Apr 22 2014 - 13:23:54)
>> DPLL locking failed for 0x44e00490
>> ### ERROR ### Please RESET the board ###
>>
>> When I reset it, I get the message again.
>>
>> I tried to google the error message and had no success finding a solution
>> or any other issue similar to that.
>>
>> Does anybody have any idea on what might have caused that error? Any idea
>> on what could be done to fix it? Is there hope for my BBB?
>>
>> Thank You.
>>
> --
> For more options, visit http://beagleboard.org/discuss
> ---
> You received this message because you are subscribed to the Google Groups
> "BeagleBoard" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to beagleboard+unsubscr...@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.
>
>
> --
> For more options, visit http://beagleboard.org/discuss
> ---
> You received this message because you are subscribed to a topic in the
> Google Groups "BeagleBoard" group.
> To unsubscribe from this topic, visit
> https://groups.google.com/d/topic/beagleboard/CJtqehUj1zw/unsubscribe.
> To unsubscribe from this group and all its topics, send an email to
> beagleboard+unsubscr...@googlegroups.com.
>
> For more options, visit https://groups.google.com/d/optout.
>

-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to beagleboard+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [beagleboard] Re: BBB DPLL boot problem

2015-08-07 Thread evilwulfie 
i can see that if your running full tilt MHZ with ethernet plugged in
it runs a bit below 500ma normally

whats running and whats the cpu load ?

On 8/7/2015 11:24 AM, fabiohmante...@gmail.com wrote:
> Well, by no apparent reason at all, by the third day my BBB rose from
> the dead and started booting again. No strange boot messages, like as
> if nothing happened. However, 600mA current is being pulled by the BBB
> from the power source with nothing connected to it, which I find
> strange. Any ideas?
>
> On Wednesday, August 5, 2015 at 7:13:20 PM UTC-3, fabiohm...@gmail.com
> wrote:
>
> Hey guys, new user here. I got an issue with my BBB and I thought
> maybe somebody here could help me. 
>
> After fiddling around with my bbb debugging a custom made cape, it
> stopped booting at all. When I plug in a serial debug cable to
> read the boot messages i get the following:
>
> U-Boot SPL 2014.04-00014-g47880f5 (Apr 22 2014 - 13:23:54)
> DPLL locking failed for 0x44e00490
> ### ERROR ### Please RESET the board ###
>
> When I reset it, I get the message again.
>
> I tried to google the error message and had no success finding a
> solution or any other issue similar to that.
>
> Does anybody have any idea on what might have caused that error?
> Any idea on what could be done to fix it? Is there hope for my BBB?
>
> Thank You.
>
> -- 
> For more options, visit http://beagleboard.org/discuss
> ---
> You received this message because you are subscribed to the Google
> Groups "BeagleBoard" group.
> To unsubscribe from this group and stop receiving emails from it, send
> an email to beagleboard+unsubscr...@googlegroups.com
> .
> For more options, visit https://groups.google.com/d/optout.

-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to beagleboard+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [beagleboard] Re: BBB DPLL boot problem

2015-08-07 Thread Gerald Coley 
Sounds like a shorted I/O pin on the processor. When it does not boot it it
is because the PMIC is shutting down due to excessive current. Sounds like
you are squeaking by and the PMIC is not shutting you down. 600 mA is too
high.

Gerald


On Fri, Aug 7, 2015 at 1:24 PM,  wrote:

> Well, by no apparent reason at all, by the third day my BBB rose from the
> dead and started booting again. No strange boot messages, like as if
> nothing happened. However, 600mA current is being pulled by the BBB from
> the power source with nothing connected to it, which I find strange. Any
> ideas?
>
>
> On Wednesday, August 5, 2015 at 7:13:20 PM UTC-3, fabiohm...@gmail.com
> wrote:
>>
>> Hey guys, new user here. I got an issue with my BBB and I thought maybe
>> somebody here could help me.
>>
>> After fiddling around with my bbb debugging a custom made cape, it
>> stopped booting at all. When I plug in a serial debug cable to read the
>> boot messages i get the following:
>>
>> U-Boot SPL 2014.04-00014-g47880f5 (Apr 22 2014 - 13:23:54)
>> DPLL locking failed for 0x44e00490
>> ### ERROR ### Please RESET the board ###
>>
>> When I reset it, I get the message again.
>>
>> I tried to google the error message and had no success finding a solution
>> or any other issue similar to that.
>>
>> Does anybody have any idea on what might have caused that error? Any idea
>> on what could be done to fix it? Is there hope for my BBB?
>>
>> Thank You.
>>
> --
> For more options, visit http://beagleboard.org/discuss
> ---
> You received this message because you are subscribed to the Google Groups
> "BeagleBoard" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to beagleboard+unsubscr...@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.
>



-- 
Gerald

ger...@beagleboard.org
http://beagleboard.org/

-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to beagleboard+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[beagleboard] Re: BBB DPLL boot problem

2015-08-07 Thread fabiohmantelli 
Well, by no apparent reason at all, by the third day my BBB rose from the 
dead and started booting again. No strange boot messages, like as if 
nothing happened. However, 600mA current is being pulled by the BBB from 
the power source with nothing connected to it, which I find strange. Any 
ideas?

On Wednesday, August 5, 2015 at 7:13:20 PM UTC-3, fabiohm...@gmail.com 
wrote:
>
> Hey guys, new user here. I got an issue with my BBB and I thought maybe 
> somebody here could help me. 
>
> After fiddling around with my bbb debugging a custom made cape, it stopped 
> booting at all. When I plug in a serial debug cable to read the boot 
> messages i get the following:
>
> U-Boot SPL 2014.04-00014-g47880f5 (Apr 22 2014 - 13:23:54)
> DPLL locking failed for 0x44e00490
> ### ERROR ### Please RESET the board ###
>
> When I reset it, I get the message again.
>
> I tried to google the error message and had no success finding a solution 
> or any other issue similar to that.
>
> Does anybody have any idea on what might have caused that error? Any idea 
> on what could be done to fix it? Is there hope for my BBB?
>
> Thank You.
>

-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to beagleboard+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.