Re: [beagleboard] rc_ files

[Robert Nelson]

On Wed, May 17, 2017 at 12:04 AM,   wrote:
> ya..everything what you said are happenening.
> But the new image is not written into the board.
> After the cyclon led stops, the default storage of 39.5MB partition  is
> opening.   is that mean new image written into the board?

Yes, after the cylon led stops, and the board shut's down.

If you remove the microSD and power up, you should see a flash drive
pop up.. When the image is running

Regards,

-- 
Robert Nelson
https://rcn-ee.com/

-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to beagleboard+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/beagleboard/CAOCHtYhPHGDYCthRkkik1AUixEdt5wyUDUE9EL29%3DSyXJAUNvQ%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

Re: [beagleboard] rc_ files

[Chris Bruner]

Try this 
https://github.com/beagleboard/beaglebone-blue/wiki/Flashing-firmware

On 2017-05-17 01:04 AM, sreedivya1...@gmail.com wrote:

ya..everything what you said are happenening.
But the new image is not written into the board.
After the cyclon led stops, the default storage of 39.5MB partition 
 is opening.   is that mean new image written into the board?


On Tuesday, May 16, 2017 at 7:22:41 PM UTC+5:30, RobertCNelson wrote:

On Tue, May 16, 2017 at 12:08 AM,  > wrote:
>  I have experiance in using beaglebone black.
>  Iam currently using beaglebone blue.
>  Iam stuck with the image write process of BBBL.
>  Iam following the instructions in the webpage
>
http://elinux.org/Beagleboard:BeagleBoneBlack_Debian#Flashing_eMMC

.
> Eventhough Iam not able to complete the booting process.
>  Iam not getting any videos in youtube. Is therre any videos
available
> for the write process? If so, can you please share the video?

Just grab the BBBL-*.img.xz

https://rcn-ee.net/rootfs/bb.org/testing/2017-05-14/iot/


Use etcher.io 

https://etcher.io/

to write to a microSD..

Stick it in and boot, wait for the cylon led and finally it
shutting down..

Regards,

-- 
Robert Nelson

https://rcn-ee.com/

--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to a topic in the 
Google Groups "BeagleBoard" group.
To unsubscribe from this topic, visit 
https://groups.google.com/d/topic/beagleboard/FasKfwC_2Z8/unsubscribe.
To unsubscribe from this group and all its topics, send an email to 
beagleboard+unsubscr...@googlegroups.com 
.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/beagleboard/93e967bd-bb81-4262-a028-8add251abe1b%40googlegroups.com 
.

For more options, visit https://groups.google.com/d/optout.



--
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups "BeagleBoard" group.

To unsubscribe from this group and stop receiving emails from it, send an email 
to beagleboard+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/beagleboard/467e8750-a34f-66b8-320b-6df417de2ecd%40gmail.com.
For more options, visit https://groups.google.com/d/optout.

Re: [beagleboard] rc_ files

[sreedivya1777]

ya..everything what you said are happenening. 
But the new image is not written into the board. 
After the cyclon led stops, the default storage of 39.5MB partition  is 
opening.   is that mean new image written into the board?

On Tuesday, May 16, 2017 at 7:22:41 PM UTC+5:30, RobertCNelson wrote:
>
> On Tue, May 16, 2017 at 12:08 AM,  > 
> wrote: 
> >  I have experiance in using beaglebone black. 
> >  Iam currently using beaglebone blue. 
> >  Iam stuck with the image write process of BBBL. 
> >  Iam following the instructions in the webpage 
> > http://elinux.org/Beagleboard:BeagleBoneBlack_Debian#Flashing_eMMC . 
> > Eventhough Iam not able to complete the booting process. 
> >  Iam not getting any videos in youtube. Is therre any videos 
> available 
> > for the write process? If so, can you please share the video? 
>
> Just grab the BBBL-*.img.xz 
>
> https://rcn-ee.net/rootfs/bb.org/testing/2017-05-14/iot/ 
>
> Use etcher.io 
>
> https://etcher.io/ 
>
> to write to a microSD.. 
>
> Stick it in and boot, wait for the cylon led and finally it shutting 
> down.. 
>
> Regards, 
>
> -- 
> Robert Nelson 
> https://rcn-ee.com/ 
>

-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to beagleboard+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/beagleboard/93e967bd-bb81-4262-a028-8add251abe1b%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [beagleboard] rc_ files

[Robert Nelson]

On Tue, May 16, 2017 at 12:08 AM,   wrote:
>  I have experiance in using beaglebone black.
>  Iam currently using beaglebone blue.
>  Iam stuck with the image write process of BBBL.
>  Iam following the instructions in the webpage
> http://elinux.org/Beagleboard:BeagleBoneBlack_Debian#Flashing_eMMC .
> Eventhough Iam not able to complete the booting process.
>  Iam not getting any videos in youtube. Is therre any videos available
> for the write process? If so, can you please share the video?

Just grab the BBBL-*.img.xz

https://rcn-ee.net/rootfs/bb.org/testing/2017-05-14/iot/

Use etcher.io

https://etcher.io/

to write to a microSD..

Stick it in and boot, wait for the cylon led and finally it shutting down..

Regards,

-- 
Robert Nelson
https://rcn-ee.com/

-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to beagleboard+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/beagleboard/CAOCHtYidnKeWrK0win8DuBn-BNgVdqmA-cMO2kVWH3Zfk8gSpQ%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

Re: [beagleboard] rc_ files

[sreedivya1777]

 I have experiance in using beaglebone black.
 Iam currently using beaglebone blue.
 Iam stuck with the image write process of BBBL.
 Iam following the instructions in the webpage 
http://elinux.org/Beagleboard:BeagleBoneBlack_Debian#Flashing_eMMC 

 . 
Eventhough Iam not able to complete the booting process.
 Iam not getting any videos in youtube. Is therre any videos available 
for the write process? If so, can you please share the video? 

On Thursday, April 13, 2017 at 8:53:44 PM UTC+5:30, RobertCNelson wrote:
>
> On Thu, Apr 13, 2017 at 10:19 AM, chris Bruner  > wrote: 
> > There are a bunch of rc_ files in /usr/bin that do various interesting 
> > things with the board. 
> > Is there source code available for these? 
> > 
> > usr/bin/rc_balance/usr/bin/rc_test_barometer 
> > /usr/bin/rc_battery_monitor/usr/bin/rc_test_buttons 
> > /usr/bin/rc_benchmark_algebra  /usr/bin/rc_test_cape 
> > /usr/bin/rc_bind_dsm   /usr/bin/rc_test_dmp 
> > /usr/bin/rc_blink  /usr/bin/rc_test_drivers 
> > /usr/bin/rc_calibrate_dsm  /usr/bin/rc_test_dsm 
> > /usr/bin/rc_calibrate_escs /usr/bin/rc_test_encoders 
> > /usr/bin/rc_calibrate_gyro /usr/bin/rc_test_filters 
> > /usr/bin/rc_calibrate_mag  /usr/bin/rc_test_imu 
> > /usr/bin/rc_check_battery  /usr/bin/rc_test_motors 
> > /usr/bin/rc_check_model/usr/bin/rc_test_polynomial 
> > /usr/bin/rc_cpu_freq   /usr/bin/rc_test_servos 
> > /usr/bin/rc_dsm_passthrough/usr/bin/rc_test_time 
> > /usr/bin/rc_kill   /usr/bin/rc_test_vector 
> > /usr/bin/rc_spi_loopback   /usr/bin/rc_uart_loopback 
> > /usr/bin/rc_startup_routine/usr/bin/rc_version 
> > /usr/bin/rc_test_adc 
> > /usr/bin/rc_test_algebra 
>
> https://github.com/StrawsonDesign/Robotics_Cape_Installer 
>
> Regards, 
>
> -- 
> Robert Nelson 
> https://rcn-ee.com/ 
>

-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to beagleboard+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/beagleboard/23c0fac6-aa8a-4012-b63b-1bacf1b723b2%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [beagleboard] rc_ files

[Chris Bruner]

Apparently it's a local problem, went to another network and things 
worked fine. So... nevermind! :)


On 2017-04-13 09:55 PM, Przemek Klosowski wrote:

If you are having problems with https, try http

git clone http://github.com/StrawsonDesign/Robotics_Cape_Installer.git 



On Thu, Apr 13, 2017 at 6:02 PM, chris Bruner > wrote:


Huh, apparently I can ping and traceroute anywhere, but wget times
out (both http and https) so It's a networking issue.


-- 
For more options, visit http://beagleboard.org/discuss

---
You received this message because you are subscribed to the Google
Groups "BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it,
send an email to beagleboard+unsubscr...@googlegroups.com
.
To view this discussion on the web visit

https://groups.google.com/d/msgid/beagleboard/7603adb2-a32f-4abf-a330-006cd3fe676e%40googlegroups.com

.


For more options, visit https://groups.google.com/d/optout
.


--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to a topic in the 
Google Groups "BeagleBoard" group.
To unsubscribe from this topic, visit 
https://groups.google.com/d/topic/beagleboard/FasKfwC_2Z8/unsubscribe.
To unsubscribe from this group and all its topics, send an email to 
beagleboard+unsubscr...@googlegroups.com 
.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/beagleboard/CAC%3D1GgEppLKv8%3Dhw78%3D6_ZYTx03q5vc%3DvbVnuMRQJqO4Fd%3DZRw%40mail.gmail.com 
.

For more options, visit https://groups.google.com/d/optout.



--
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups "BeagleBoard" group.

To unsubscribe from this group and stop receiving emails from it, send an email 
to beagleboard+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/beagleboard/4cc6e3fd-cfce-2410-ee63-af0b10dd05cf%40gmail.com.
For more options, visit https://groups.google.com/d/optout.

Re: [beagleboard] rc_ files

[Przemek Klosowski]

If you are having problems with https, try http

git clone http://github.com/StrawsonDesign/Robotics_Cape_Installer.git


On Thu, Apr 13, 2017 at 6:02 PM, chris Bruner  wrote:

> Huh, apparently I can ping and traceroute anywhere, but wget times out
> (both http and https) so It's a networking issue.
>
>>
 --
> For more options, visit http://beagleboard.org/discuss
> ---
> You received this message because you are subscribed to the Google Groups
> "BeagleBoard" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to beagleboard+unsubscr...@googlegroups.com.
> To view this discussion on the web visit https://groups.google.com/d/
> msgid/beagleboard/7603adb2-a32f-4abf-a330-006cd3fe676e%40googlegroups.com
> 
> .
>
> For more options, visit https://groups.google.com/d/optout.
>

-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to beagleboard+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/beagleboard/CAC%3D1GgEppLKv8%3Dhw78%3D6_ZYTx03q5vc%3DvbVnuMRQJqO4Fd%3DZRw%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

Re: [beagleboard] rc_ files

[chris Bruner]

Huh, apparently I can ping and traceroute anywhere, but wget times out 
(both http and https) so It's a networking issue.

>
>>>

-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to beagleboard+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/beagleboard/7603adb2-a32f-4abf-a330-006cd3fe676e%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [beagleboard] rc_ files

[chris Bruner]

apparently having other problems with https, Is this a clue?

root@beaglebone:/etc/apt# apt-get update
Ign https://deb.nodesource.com jessie InRelease
Ign https://deb.nodesource.com jessie Release.gpg   
   
Ign https://deb.nodesource.com jessie Release   
   
Err https://deb.nodesource.com jessie/main armhf Packages   
   
  
Err https://deb.nodesource.com jessie/main armhf Packages   
   
  
Err https://deb.nodesource.com jessie/main armhf Packages   
   
  
Err https://deb.nodesource.com jessie/main armhf Packages   
   
  
Err https://deb.nodesource.com jessie/main armhf Packages   
   
  Failed to connect to deb.nodesource.com port 443: Connection refused


>>

-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to beagleboard+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/beagleboard/312965a9-56b4-44cf-8251-49c5770e8565%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [beagleboard] rc_ files

[chris Bruner]

Good thought, but unfortunately it didn't work.  Any other ideas?



On Thursday, April 13, 2017 at 5:16:57 PM UTC-4, RobertCNelson wrote:
>
> On Thu, Apr 13, 2017 at 4:03 PM, chris Bruner  > wrote: 
> > Yes no problem there. I can also ping github.com 
> > I suspect it has to do with the https: part, but otherwise no clue. 
>
> make sure the clock is synced: 
>
> https relies on having the clocks correct.. 
>
> Regards, 
>
> -- 
> Robert Nelson 
> https://rcn-ee.com/ 
>

-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to beagleboard+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/beagleboard/f4105317-27f2-4254-8dfd-6971dd248813%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [beagleboard] rc_ files

[Robert Nelson]

On Thu, Apr 13, 2017 at 4:03 PM, chris Bruner  wrote:
> Yes no problem there. I can also ping github.com
> I suspect it has to do with the https: part, but otherwise no clue.

make sure the clock is synced:

https relies on having the clocks correct..

Regards,

-- 
Robert Nelson
https://rcn-ee.com/

-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to beagleboard+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/beagleboard/CAOCHtYirfmFyse-TXWNbkfdz9-OtsTBVi5v7k_QQkMfBAHdNzw%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

Re: [beagleboard] rc_ files

[chris Bruner]

Yes no problem there. I can also ping github.com
I suspect it has to do with the https: part, but otherwise no clue.

On Thursday, April 13, 2017 at 4:04:24 PM UTC-4, RobertCNelson wrote:
>
> On Thu, Apr 13, 2017 at 2:57 PM, chris Bruner  > wrote: 
> > Thanks, Robert. I've now come across a weird problem when trying to 
> clone 
> > the repository onto the board. I've ssh'd onto the board, and run 
> > git clone https://github.com/StrawsonDesign/Robotics_Cape_Installer.git 
> > 
> > and it comes back with 
> > Cloning into 'Robotics_Cape_Installer'... 
> > fatal: unable to access 
> > 'https://github.com/StrawsonDesign/Robotics_Cape_Installer.git/': 
> Failed to 
> > connect to github.com port 443: Connection refused 
> > 
> > Any ideas why the connection is refused? (It's not refused on my main 
> > computer.) 
>
> can you ping 8.8.8.8 or google.com ? 
>
> Regards, 
>
> -- 
> Robert Nelson 
> https://rcn-ee.com/ 
>

-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to beagleboard+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/beagleboard/f98b109c-4901-4e5d-9e0f-c02b71835b68%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [beagleboard] rc_ files

[Robert Nelson]

On Thu, Apr 13, 2017 at 2:57 PM, chris Bruner  wrote:
> Thanks, Robert. I've now come across a weird problem when trying to clone
> the repository onto the board. I've ssh'd onto the board, and run
> git clone https://github.com/StrawsonDesign/Robotics_Cape_Installer.git
>
> and it comes back with
> Cloning into 'Robotics_Cape_Installer'...
> fatal: unable to access
> 'https://github.com/StrawsonDesign/Robotics_Cape_Installer.git/': Failed to
> connect to github.com port 443: Connection refused
>
> Any ideas why the connection is refused? (It's not refused on my main
> computer.)

can you ping 8.8.8.8 or google.com ?

Regards,

-- 
Robert Nelson
https://rcn-ee.com/

-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to beagleboard+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/beagleboard/CAOCHtYhCoi5NVswyU0rCyz%3D6NX0qyTHk8k-fJ8EjmvjBUTJs6g%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

Re: [beagleboard] rc_ files

[chris Bruner]

Thanks, Robert. I've now come across a weird problem when trying to clone 
the repository onto the board. I've ssh'd onto the board, and run 
git clone https://github.com/StrawsonDesign/Robotics_Cape_Installer.git

and it comes back with
Cloning into 'Robotics_Cape_Installer'...
fatal: unable to access 
'https://github.com/StrawsonDesign/Robotics_Cape_Installer.git/': Failed to 
connect to github.com port 443: Connection refused

Any ideas why the connection is refused? (It's not refused on my main 
computer.)


On Thursday, April 13, 2017 at 11:23:44 AM UTC-4, RobertCNelson wrote:
>
> On Thu, Apr 13, 2017 at 10:19 AM, chris Bruner  > wrote: 
> > There are a bunch of rc_ files in /usr/bin that do various interesting 
>
> https://github.com/StrawsonDesign/Robotics_Cape_Installer 
>
> Regards, 
>
> -- 
> Robert Nelson 
> https://rcn-ee.com/ 
>

-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to beagleboard+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/beagleboard/08be9700-d50e-4de2-8cfd-aa6f5ec2614f%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [beagleboard] rc_ files

[Robert Nelson]

On Thu, Apr 13, 2017 at 10:19 AM, chris Bruner  wrote:
> There are a bunch of rc_ files in /usr/bin that do various interesting
> things with the board.
> Is there source code available for these?
>
> usr/bin/rc_balance/usr/bin/rc_test_barometer
> /usr/bin/rc_battery_monitor/usr/bin/rc_test_buttons
> /usr/bin/rc_benchmark_algebra  /usr/bin/rc_test_cape
> /usr/bin/rc_bind_dsm   /usr/bin/rc_test_dmp
> /usr/bin/rc_blink  /usr/bin/rc_test_drivers
> /usr/bin/rc_calibrate_dsm  /usr/bin/rc_test_dsm
> /usr/bin/rc_calibrate_escs /usr/bin/rc_test_encoders
> /usr/bin/rc_calibrate_gyro /usr/bin/rc_test_filters
> /usr/bin/rc_calibrate_mag  /usr/bin/rc_test_imu
> /usr/bin/rc_check_battery  /usr/bin/rc_test_motors
> /usr/bin/rc_check_model/usr/bin/rc_test_polynomial
> /usr/bin/rc_cpu_freq   /usr/bin/rc_test_servos
> /usr/bin/rc_dsm_passthrough/usr/bin/rc_test_time
> /usr/bin/rc_kill   /usr/bin/rc_test_vector
> /usr/bin/rc_spi_loopback   /usr/bin/rc_uart_loopback
> /usr/bin/rc_startup_routine/usr/bin/rc_version
> /usr/bin/rc_test_adc
> /usr/bin/rc_test_algebra

https://github.com/StrawsonDesign/Robotics_Cape_Installer

Regards,

-- 
Robert Nelson
https://rcn-ee.com/

-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to beagleboard+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/beagleboard/CAOCHtYi7JvrCUKBTB_StWb_qN7VTCeaYwJbL_%3D-%2Bzvh%3DNajLcw%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

[beagleboard] rc_ files

[chris Bruner]

There are a bunch of rc_ files in /usr/bin that do various interesting 
things with the board. 
Is there source code available for these?

usr/bin/rc_balance/usr/bin/rc_test_barometer
/usr/bin/rc_battery_monitor/usr/bin/rc_test_buttons
/usr/bin/rc_benchmark_algebra  /usr/bin/rc_test_cape
/usr/bin/rc_bind_dsm   /usr/bin/rc_test_dmp
/usr/bin/rc_blink  /usr/bin/rc_test_drivers
/usr/bin/rc_calibrate_dsm  /usr/bin/rc_test_dsm
/usr/bin/rc_calibrate_escs /usr/bin/rc_test_encoders
/usr/bin/rc_calibrate_gyro /usr/bin/rc_test_filters
/usr/bin/rc_calibrate_mag  /usr/bin/rc_test_imu
/usr/bin/rc_check_battery  /usr/bin/rc_test_motors
/usr/bin/rc_check_model/usr/bin/rc_test_polynomial
/usr/bin/rc_cpu_freq   /usr/bin/rc_test_servos
/usr/bin/rc_dsm_passthrough/usr/bin/rc_test_time
/usr/bin/rc_kill   /usr/bin/rc_test_vector
/usr/bin/rc_spi_loopback   /usr/bin/rc_uart_loopback
/usr/bin/rc_startup_routine/usr/bin/rc_version
/usr/bin/rc_test_adc   
/usr/bin/rc_test_algebra 

-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to beagleboard+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/beagleboard/5191ace7-19cf-49bb-b227-b6224b07a206%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.