Re: Installing Perl DBI and Oracle DBD in AIX 5.1

[Pablo Salinas]

Hi,
 Thanks for your help. I searched the cc_r
compiler in my AIX system, then copied the path to the
Makefile and everything runned smoothly.
After that, I installed the Oracle DBI by following
the README instructions.

thanks again,
  Pablo Salinas


 --- Wiggins d Anconia <[EMAIL PROTECTED]>
escribió: 
> > Hi there,
> >   I have an AIX 5.1 machine and I wish to
> use
> > the  perl DBI and oracle DBD in this machine. I
> have
> > tried to install them by downloading DBI-1.45.tar
> and
> > DBD-Oracle-2.15.tar files from
> http://www.cpan.org/
> >
> 
> This is a rather difficult combination and I know
> there has been lots of
> discussion about installing DBI on AIX and with
> Oracle on the dbi-users
> list, you may want to check the archives for it for
> help.
> 
> http://www.mail-archive.com/[EMAIL PROTECTED]/
>  
> > So, I uncompressed the DBI-1.45.tar file and
> followed
> > the  README file instructions.
> > First, I runned the folowing command:
> > perl Makefile.PL
> > 
> > this created the Makefile
> > So, I tried to run the make command, but I got the
> > following error:
> > 
> > "cc_r -c-D_ALL_SOURCE -D_ANSI_C_SOURCE
> > -D_POSIX_SOURCE -qmaxmem=16384 -qnoansialias
> > -DUSE_NATIVE_DLOPEN -DNEED_PTHREAD_INIT -q32
> > -D_LARGE_FILES -qlonglong -O-DVERSION=\"1.45\"
> 
> > -DXS_VERSION=\"1.45\" 
> > "-I/usr/opt/perl5/lib/5.8.0/aix-thread-multi/CORE"
>  
> > Perl.c
> > /bin/sh: cc_r:  not found.
> > make: 1254-004 The error code from the last
> command is
> > 127."
> > 
> > So, I changed the compiler from cc_r to cc, runned
> > make again and got this error message:
> > 
> 
> I am assuming the installer pulled cc_r from the
> config for Perl, check
> it with perl -V.  Modules generally have to be built
> with the same
> compiler used to build Perl which is why you would
> get this second set
> of errors. Is 'cc_r' not installed on the system? 
> Was the Perl
> installed with a binary, or built on a different
> system?
> 
> I suspect you will need to match up the compiler of
> Perl with the ones
> you have available.
> 
> > "cc -c-D_ALL_SOURCE -D_ANSI_C_SOURCE
> > -D_POSIX_SOURCE -qmaxmem=16384 -qnoansialias
> > -DUSE_NATIVE_DLOPEN -DNEED_PTHREAD_INIT -q32
> > -D_LARGE_FILES -qlonglong -O-DVERSION=\"1.45\"
> 
> > -DXS_VERSION=\"1.45\" 
> > "-I/usr/opt/perl5/lib/5.8.0/aix-thread-multi/CORE"
>  
> > Perl.c
> >
>
"/usr/opt/perl5/lib/5.8.0/aix-thread-multi/CORE/reentr.h",
> > line 610.16: 1506-007 (S) "struct drand48_data" is
> > undefined.
> >
>
"/usr/opt/perl5/lib/5.8.0/aix-thread-multi/CORE/reentr.h",
> > line 717.16: 1506-007 (S) "struct random_data" is
> > undefined.
> > make: 1254-004 The error code from the last
> command is
> > 1.
> > 
> > 
> > Stop."
> > 
> > 
> > Can somebody help me to get the job done?
> > 
> > thanks in advance,
> > Pablo Salinas
> > 
> 
> If you don't get a satisfactory answer from this
> list I would definitely
> try the dbi-users list they are very good about
> helping with installations.
> 
> http://danconia.org
> 
> 
> -- 
> To unsubscribe, e-mail:
> [EMAIL PROTECTED]
> For additional commands, e-mail:
> [EMAIL PROTECTED]
> 
> 
> 
> 
>  

_
Do You Yahoo!?
Información de Estados Unidos y América Latina, en Yahoo! Noticias.
Visítanos en http://noticias.espanol.yahoo.com

-- 
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
 

Re: Installing Perl DBI and Oracle DBD in AIX 5.1

[Wiggins d Anconia]

> Hi there,
>   I have an AIX 5.1 machine and I wish to use
> the  perl DBI and oracle DBD in this machine. I have
> tried to install them by downloading DBI-1.45.tar and
> DBD-Oracle-2.15.tar files from http://www.cpan.org/
>

This is a rather difficult combination and I know there has been lots of
discussion about installing DBI on AIX and with Oracle on the dbi-users
list, you may want to check the archives for it for help.

http://www.mail-archive.com/[EMAIL PROTECTED]/
 
> So, I uncompressed the DBI-1.45.tar file and followed
> the  README file instructions.
> First, I runned the folowing command:
> perl Makefile.PL
> 
> this created the Makefile
> So, I tried to run the make command, but I got the
> following error:
> 
> "cc_r -c-D_ALL_SOURCE -D_ANSI_C_SOURCE
> -D_POSIX_SOURCE -qmaxmem=16384 -qnoansialias
> -DUSE_NATIVE_DLOPEN -DNEED_PTHREAD_INIT -q32
> -D_LARGE_FILES -qlonglong -O-DVERSION=\"1.45\" 
> -DXS_VERSION=\"1.45\" 
> "-I/usr/opt/perl5/lib/5.8.0/aix-thread-multi/CORE"  
> Perl.c
> /bin/sh: cc_r:  not found.
> make: 1254-004 The error code from the last command is
> 127."
> 
> So, I changed the compiler from cc_r to cc, runned
> make again and got this error message:
> 

I am assuming the installer pulled cc_r from the config for Perl, check
it with perl -V.  Modules generally have to be built with the same
compiler used to build Perl which is why you would get this second set
of errors. Is 'cc_r' not installed on the system?  Was the Perl
installed with a binary, or built on a different system?

I suspect you will need to match up the compiler of Perl with the ones
you have available.

> "cc -c-D_ALL_SOURCE -D_ANSI_C_SOURCE
> -D_POSIX_SOURCE -qmaxmem=16384 -qnoansialias
> -DUSE_NATIVE_DLOPEN -DNEED_PTHREAD_INIT -q32
> -D_LARGE_FILES -qlonglong -O-DVERSION=\"1.45\" 
> -DXS_VERSION=\"1.45\" 
> "-I/usr/opt/perl5/lib/5.8.0/aix-thread-multi/CORE"  
> Perl.c
> "/usr/opt/perl5/lib/5.8.0/aix-thread-multi/CORE/reentr.h",
> line 610.16: 1506-007 (S) "struct drand48_data" is
> undefined.
> "/usr/opt/perl5/lib/5.8.0/aix-thread-multi/CORE/reentr.h",
> line 717.16: 1506-007 (S) "struct random_data" is
> undefined.
> make: 1254-004 The error code from the last command is
> 1.
> 
> 
> Stop."
> 
> 
> Can somebody help me to get the job done?
> 
> thanks in advance,
> Pablo Salinas
> 

If you don't get a satisfactory answer from this list I would definitely
try the dbi-users list they are very good about helping with installations.

http://danconia.org


-- 
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]