Re: [BVARC] Please confirm the meeting location and time.
The meeting takes place at the Shriner's hall on the left side of eldridge. This is about 1/2 mile after you . Turn on to eldridge. There is a large church on the left side and we use their parking for the event. If you have problems get on the radio. Jo.L. KE7NSB On Wed, Oct 11, 2017 at 9:42 PM, John Parmalee via BVARC wrote: > I have never attended one of your meetings, The yagi presentation is > inviting enough for me to come from Montgomery county. Tell me where and > when please. > > John Parmalee > jparma...@aol.com > 281-380-3811 <(281)%20380-3811> > K5VGM WI2XLJ > > > *From:* Mike Hardwick via BVARC > *Sent:* Tuesday, October 10, 2017 22:11 > *To:* BRAZOS VALLEY AMATEUR RADIO CLUB > *Cc:* Mike Hardwick > *Subject:* [BVARC] General Meeting Program Information for Thursday, > October 12, 2107 > > > > > > Sorry for the late notice but Hurricane Harvey is still affecting many > club members around Houston. I hope everyone will be able to attend the > meeting for these two interesting programs. > > > > > > Program 1 – “The History of the Yagi-Uda Antenna Array” > > > > The Radio Hotel will present "The History of the Yagi-Uda Antenna Array" > in slides and song. A short eight minute Power Point 'show' highlighting > the invention, the inventors and the Radio Ham's practical implementation > and refinement of this mid-1920's antenna discovery. > > > > If you saw "Here Comes the Sun" a few years back, then you will not want > to miss this new fun and informative short from the Smoking Crow > Productions studio. > > > > Hope to see you at the meeting. > > Rick Hiller, W5RH > > > > > > > > Program 2 – “Introduction to surface mount assembly” > > > > Bali Educational Programs will have general discussions surface mount > assembly. The program will start with an explanation of why surface mount > assembly is easier and faster than through-hole assembly. Even though there > not be any surface mount soldering, the program will have description of > the process and techniques with boards that were assembled. Descriptions > will be discussed on what can be done differently when designing and > building with surface mount components. The program will cover resources > for designing boards and getting them fabricated cheaply. > > > > Some of the points that will be covered are > > > > - Sample boards > > -Equipment recommendations > > -Soldering and de-soldering techniques > > -Design recommendations for specific components > > -Board design resources > > > > If there is enough interest, a program will be held in the near future > covering the following: > > > > Controllers, program and designs from a low level for PIC and Atmel to > Arduino to Raspberry Pi using modules and code libraries and other Linux > options. Information will also be present on > > highly-integrated system-on-chip modules like ESP8266 and ESP32. > Information will be presented on various inputs and outputs like sensors, > relays, MOSFETs, stepper and servo motors, etc. > > > > Love to have you at the presentation, > > Donovan Bali, KG5BDZ > > > > > > I hope everyone can make it to the meeting. Both Donovan and Rick have > really worked getting information together for their programs. > > Hope you can make it to the meeting. > > > > Mike > > XN5VCD > > > > > > > > -- > ___ > BVARC mailing list > BVARC@bvarc.org > http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org > Message delivered to mit...@mitchl.net > > ___ > BVARC mailing list > BVARC@bvarc.org > http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org > Message delivered to pbn...@gmail.com > > ___ > BVARC mailing list > BVARC@bvarc.org > http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org > Message delivered to jppn...@comcast.net > > ___ > BVARC mailing list > BVARC@bvarc.org > http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org > Message delivered to jparma...@aol.com > > > ___ > BVARC mailing list > BVARC@bvarc.org > http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org > Message delivered to jolkeene...@gmail.com > > ___ BVARC mailing list BVARC@bvarc.org http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org Message delivered to arch...@mail-archive.com
Re: [BVARC] Please confirm the meeting location and time.
Tonight 7:30. Sent from my iPhone > On Oct 12, 2017, at 8:19 AM, John parmalee via BVARC wrote: > > Thanks Bill. > > Sent through the international space station > >> On Oct 11, 2017, at 10:55 PM, Bill Dillon via BVARC wrote: >> >> Hi John, >> >> Our meeting will be this Thursday evening (12 October), at 7:30pm, at the >> Sugar Land Masonic Lodge, 421 Eldridge Rd, Sugar Land TX. >> >> Check out the club website at bvarc.org. >> >> 73 de Bill, KG5FQX >> >>> On Wed, Oct 11, 2017 at 9:42 PM, John Parmalee via BVARC >>> wrote: >>> I have never attended one of your meetings, The yagi presentation is >>> inviting enough for me to come from Montgomery county. Tell me where and >>> when please. >>> >>> John Parmalee >>> jparma...@aol.com >>> 281-380-3811 >>> K5VGM WI2XLJ >>> >>> From: Mike Hardwick via BVARC >>> Sent: Tuesday, October 10, 2017 22:11 >>> To: BRAZOS VALLEY AMATEUR RADIO CLUB >>> Cc: Mike Hardwick >>> Subject: [BVARC] General Meeting Program Information for Thursday, October >>> 12, 2107 >>> >>> >>> >>> >>> >>> Sorry for the late notice but Hurricane Harvey is still affecting many club >>> members around Houston. I hope everyone will be able to attend the meeting >>> for these two interesting programs. >>> >>> >>> >>> >>> >>> Program 1 – “The History of the Yagi-Uda Antenna Array” >>> >>> >>> >>> The Radio Hotel will present "The History of the Yagi-Uda Antenna Array" in >>> slides and song. A short eight minute Power Point 'show' highlighting the >>> invention, the inventors and the Radio Ham's practical implementation and >>> refinement of this mid-1920's antenna discovery. >>> >>> >>> >>> If you saw "Here Comes the Sun" a few years back, then you will not want to >>> miss this new fun and informative short from the Smoking Crow Productions >>> studio. >>> >>> >>> >>> Hope to see you at the meeting. >>> >>> Rick Hiller, W5RH >>> >>> >>> >>> >>> >>> >>> >>> Program 2 – “Introduction to surface mount assembly” >>> >>> >>> >>> Bali Educational Programs will have general discussions surface mount >>> assembly. The program will start with an explanation of why surface mount >>> assembly is easier and faster than through-hole assembly. Even though there >>> not be any surface mount soldering, the program will have description of >>> the process and techniques with boards that were assembled. Descriptions >>> will be discussed on what can be done differently when designing and >>> building with surface mount components. The program will cover resources >>> for designing boards and getting them fabricated cheaply. >>> >>> >>> >>> Some of the points that will be covered are >>> >>> >>> >>> - Sample boards >>> >>> -Equipment recommendations >>> >>> -Soldering and de-soldering techniques >>> >>> -Design recommendations for specific components >>> >>> -Board design resources >>> >>> >>> >>> If there is enough interest, a program will be held in the near future >>> covering the following: >>> >>> >>> >>> Controllers, program and designs from a low level for PIC and Atmel to >>> Arduino to Raspberry Pi using modules and code libraries and other Linux >>> options. Information will also be present on >>> >>> highly-integrated system-on-chip modules like ESP8266 and ESP32. >>> Information will be presented on various inputs and outputs like sensors, >>> relays, MOSFETs, stepper and servo motors, etc. >>> >>> >>> >>> Love to have you at the presentation, >>> >>> Donovan Bali, KG5BDZ >>> >>> >>> >>> >>> >>> I hope everyone can make it to the meeting. Both Donovan and Rick have >>> really worked getting information together for their programs. >>> >>> Hope you can make it to the meeting. >>> >>> >>> >>> Mike >>> >>> XN5VCD >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> ___ >>> BVARC mailing list >>> BVARC@bvarc.org >>> http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org >>> Message delivered to mit...@mitchl.net >>> ___ >>> BVARC mailing list >>> BVARC@bvarc.org >>> http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org >>> Message delivered to pbn...@gmail.com >>> ___ >>> BVARC mailing list >>> BVARC@bvarc.org >>> http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org >>> Message delivered to jppn...@comcast.net >>> ___ >>> BVARC mailing list >>> BVARC@bvarc.org >>> http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org >>> Message delivered to jparma...@aol.com >>> >>> ___ >>> BVARC mailing list >>> BVARC@bvarc.org >>> http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org >>> Message delivered to bill.g.dil...@gmail.com >>> >> >> ___ >> BVARC mailing list >> BVARC@bvarc.org >> http://mail.bvarc.o
Re: [BVARC] Please confirm the meeting location and time.
Thanks Bill. Sent through the international space station > On Oct 11, 2017, at 10:55 PM, Bill Dillon via BVARC wrote: > > Hi John, > > Our meeting will be this Thursday evening (12 October), at 7:30pm, at the > Sugar Land Masonic Lodge, 421 Eldridge Rd, Sugar Land TX. > > Check out the club website at bvarc.org. > > 73 de Bill, KG5FQX > >> On Wed, Oct 11, 2017 at 9:42 PM, John Parmalee via BVARC >> wrote: >> I have never attended one of your meetings, The yagi presentation is >> inviting enough for me to come from Montgomery county. Tell me where and >> when please. >> >> John Parmalee >> jparma...@aol.com >> 281-380-3811 >> K5VGM WI2XLJ >> >> From: Mike Hardwick via BVARC >> Sent: Tuesday, October 10, 2017 22:11 >> To: BRAZOS VALLEY AMATEUR RADIO CLUB >> Cc: Mike Hardwick >> Subject: [BVARC] General Meeting Program Information for Thursday, October >> 12, 2107 >> >> >> >> >> >> Sorry for the late notice but Hurricane Harvey is still affecting many club >> members around Houston. I hope everyone will be able to attend the meeting >> for these two interesting programs. >> >> >> >> >> >> Program 1 – “The History of the Yagi-Uda Antenna Array” >> >> >> >> The Radio Hotel will present "The History of the Yagi-Uda Antenna Array" in >> slides and song. A short eight minute Power Point 'show' highlighting the >> invention, the inventors and the Radio Ham's practical implementation and >> refinement of this mid-1920's antenna discovery. >> >> >> >> If you saw "Here Comes the Sun" a few years back, then you will not want to >> miss this new fun and informative short from the Smoking Crow Productions >> studio. >> >> >> >> Hope to see you at the meeting. >> >> Rick Hiller, W5RH >> >> >> >> >> >> >> >> Program 2 – “Introduction to surface mount assembly” >> >> >> >> Bali Educational Programs will have general discussions surface mount >> assembly. The program will start with an explanation of why surface mount >> assembly is easier and faster than through-hole assembly. Even though there >> not be any surface mount soldering, the program will have description of the >> process and techniques with boards that were assembled. Descriptions will be >> discussed on what can be done differently when designing and building with >> surface mount components. The program will cover resources for designing >> boards and getting them fabricated cheaply. >> >> >> >> Some of the points that will be covered are >> >> >> >> - Sample boards >> >> -Equipment recommendations >> >> -Soldering and de-soldering techniques >> >> -Design recommendations for specific components >> >> -Board design resources >> >> >> >> If there is enough interest, a program will be held in the near future >> covering the following: >> >> >> >> Controllers, program and designs from a low level for PIC and Atmel to >> Arduino to Raspberry Pi using modules and code libraries and other Linux >> options. Information will also be present on >> >> highly-integrated system-on-chip modules like ESP8266 and ESP32. Information >> will be presented on various inputs and outputs like sensors, relays, >> MOSFETs, stepper and servo motors, etc. >> >> >> >> Love to have you at the presentation, >> >> Donovan Bali, KG5BDZ >> >> >> >> >> >> I hope everyone can make it to the meeting. Both Donovan and Rick have >> really worked getting information together for their programs. >> >> Hope you can make it to the meeting. >> >> >> >> Mike >> >> XN5VCD >> >> >> >> >> >> >> >> >> >> ___ >> BVARC mailing list >> BVARC@bvarc.org >> http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org >> Message delivered to mit...@mitchl.net >> ___ >> BVARC mailing list >> BVARC@bvarc.org >> http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org >> Message delivered to pbn...@gmail.com >> ___ >> BVARC mailing list >> BVARC@bvarc.org >> http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org >> Message delivered to jppn...@comcast.net >> ___ >> BVARC mailing list >> BVARC@bvarc.org >> http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org >> Message delivered to jparma...@aol.com >> >> ___ >> BVARC mailing list >> BVARC@bvarc.org >> http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org >> Message delivered to bill.g.dil...@gmail.com >> > > ___ > BVARC mailing list > BVARC@bvarc.org > http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org > Message delivered to jparma...@aol.com ___ BVARC mailing list BVARC@bvarc.org http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org Message delivered to arch...@mail-archive.com
Re: [BVARC] General License Exam
Wonderful news Mike! Congratulations!! JP, K5JPP Sent from my iPhone > On Oct 12, 2017, at 12:23 AM, Mike Teers KG5SXG via BVARC > wrote: > > I passed my General License Exam Tuesday. > > ___ > BVARC mailing list > BVARC@bvarc.org > http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org > Message delivered to jppn...@comcast.net ___ BVARC mailing list BVARC@bvarc.org http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org Message delivered to arch...@mail-archive.com