Hi Guillermo, Please can I have a more detailed screenshot of your steps. I don't just want to see the error. I want to see all the steps proceeding the error. This is not clear to me from your screen shot.
1) What board are you targeting? I see you are using the tengbe library? Is this perhaps a ROACH2 or SNAP? ROACH2 may or may not have issues when using the latest casperfpga githash, so be aware. There is a ROACH2 casperfpga githash, but it doesn't have all the latest fixes. 2) Send me your slx, so that I can build and verify if needed 3) What repo of mlib_devel (include the githash and branch) and casperfpga are you using? I know I have had that progska issue before when running ipython under the casperfpga cloned directory. This is clearly a new issue now related to the tengbe component. Please note that I am busy installing my new Ubuntu 18.04LTS machine and so it will take some time for me to look at this further until my development is setup and working properly. Kind regards, Adam Isaacson South African Radio Astronomy Observatory (SARAO) Hardware Manager Cell: (+27) 825639602 Tel: (+27) 215067300 email: aisaac...@ska.ac.za On Fri, Feb 12, 2021 at 6:09 PM Guillermo Gancio <ganci...@gmail.com> wrote: > Hi, > Thanks for all the replies, I tried with " I think try going into the > progska directory, `make && make install` then try again? It's been a > while since I've done this." with no success.. > > Then I follow the steps from Adam with no success, but a different > error.... > The install procedure goes without any error. > > 1) You are not running the python3 virtual machine. No virtual machine > should be used. > That's correct, I'm not using a virtual machine (or virtual env) > > 2) When you run "ipython" you are doing it outside the closed > "casperfpga" repo. This is important > Aha, I was inside casperfpga, when doing it outside the casperfpga > directory I got other error.... > " KeyError: 'casperfpga/tengbe_mmap.txt' " > > 3) point three gives the error, so I can't get the casperfpga_version- > > 4) What githash of casperfpga are you using? > git rev-parse HEAD gives: eac2d4625c88da575a7fe82df2582cf2be43e37e > > > > Thanks again!!! > Cheers, > > > El vie, 12 feb 2021 a las 4:17, Adam Isaacson (<aisaac...@ska.ac.za>) > escribió: > > > > Hi Guillermo, > > > > The instructions you are following should work to install casperfpga. I > find the following install procedure works for me: > > > > # remove current casperfpga install files > > 1) $ cd /usr/local/lib/python2.7/dist-packages > > 2) $ sudo rm -rf casper* > > > > # clone the repository to your working directory > > 3) $ cd /path/to/working/directory > > 4) $ git clone https://github.com/casper-astro/casperfpga.git > > 5) $ cd casperfpga > > 6) $ git checkout master > > 7) $ sudo pip install -r requirements.txt > > 8) $ sudo python setup.py install > > > > Please confirm/provide the following for me: > > > > 1) You are not running the python3 virtual machine. No virtual machine > should be used. > > > > 2) When you run "ipython" you are doing it outside the closed > "casperfpga" repo. This is important > > > > 3) Run the following steps at the terminal: > > > > a) ipython > > > > b) import casperfpga > > > > c) casperfpga.__version__ (What version do you read back?) > > > > 4) What githash of casperfpga are you using? > > > > 5) Send screen captures - this helps with debugging! > > > > Kind regards, > > > > > > Adam Isaacson > > South African Radio Astronomy Observatory (SARAO) > > Hardware Manager > > Cell: (+27) 825639602 > > Tel: (+27) 215067300 > > email: aisaac...@ska.ac.za > > > > > > > > On Fri, Feb 12, 2021 at 8:09 AM Colm Bracken <colmbrac...@gmail.com> > wrote: > >> > >> Have you definitely downloaded and installed all the python programs? > >> > >> On Thu 11 Feb 2021, 5:02 PM Guillermo Gancio, <ganci...@gmail.com> > wrote: > >>> > >>> Hi all, > >>> I'm having a silly error that I Can't figure out. > >>> I'm installing casperfpga on a Ubuntu 18.04, python 2.7 and I get the > error, > >>> > >>> ImportError: No module named progska > >>> > >>> I followed the steps from > https://github.com/casper-astro/casperfpga#installation with no apparent > errors... > >>> > >>> Thanks! > >>> > >>> -- > >>> You received this message because you are subscribed to the Google > Groups "casper@lists.berkeley.edu" group. > >>> To unsubscribe from this group and stop receiving emails from it, send > an email to casper+unsubscr...@lists.berkeley.edu. > >>> To view this discussion on the web visit > https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CA%2BEePfQiGYL3iG5E4V19SXXGhoSUDnLjkzsUT3CSaOOu_W7OQA%40mail.gmail.com > . > >> > >> -- > >> You received this message because you are subscribed to the Google > Groups "casper@lists.berkeley.edu" group. > >> To unsubscribe from this group and stop receiving emails from it, send > an email to casper+unsubscr...@lists.berkeley.edu. > >> To view this discussion on the web visit > https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CAEx9wh_d85iT2fM9TJ77ug1MVus_Qy3henpyGVY8zmkbBJCgrQ%40mail.gmail.com > . > > > > -- > > You received this message because you are subscribed to the Google > Groups "casper@lists.berkeley.edu" group. > > To unsubscribe from this group and stop receiving emails from it, send > an email to casper+unsubscr...@lists.berkeley.edu. > > To view this discussion on the web visit > https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CADTJ%3DnF%3DuePD5zB8F%2B8s4SboXXwBSSS9r9rE7Zp%2B4PTBY1_Y6g%40mail.gmail.com > . > > > > -- > Instituto Argentino de Radioastronomia > [Argentine Institute of Radioastronomy] > > Guillermo M. Gancio > Responsable Área Observatorio > [Head of Observatory] > > Tel: (0054-0221) 482-4903 Int: 106 > Mail laboral ggan...@iar.unlp.edu.ar > > -- > You received this message because you are subscribed to the Google Groups " > casper@lists.berkeley.edu" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to casper+unsubscr...@lists.berkeley.edu. > To view this discussion on the web visit > https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CA%2BEePfSC_L-e4iU%3D%2Bmih9KwaYu_YLC34aHKNg59WJ6c_G4NWSQ%40mail.gmail.com > . > -- You received this message because you are subscribed to the Google Groups "casper@lists.berkeley.edu" group. To unsubscribe from this group and stop receiving emails from it, send an email to casper+unsubscr...@lists.berkeley.edu. To view this discussion on the web visit https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CADTJ%3DnG1XMAUp1inqJLZ13U4zGkY93C%2Bssk56hE%2B_UJg7O0Ymg%40mail.gmail.com.
