Hi Alec,
I'm using a windows XP laptop with hyperterminal. This is the same
setup I've used in the past for doing the xmodem transfer.
Maybe I should gather up another machine and try it...?
Thanks,
Jason
On 3/20/2014 11:26 AM, Alec Rust wrote:
Hi Jason, this is a tricky problem! What program are you using to do
the Xmodem transfer? We use minicom at 115200 baud. Perhaps the clock
is going out of sync?
Regards
Alec
All,
I'm currently troubleshooting a bad roach1 board, and I thought I'd
ask for some advice about the problems I'm seeing.
The board seems to be bricked. It doesn't do anything on power up.
So, I attached our wiggler and it appears to successfully run the
macro loadram_rinit_auto.mac. However, I don't get the funky "S"
character on hyperterm after the macro completes. Instead, it
displays multiple strings of hex numbers.
For grins, I tried to send the uboot file
(uboot-2010-07-15-r3231-dram) via xmodem even though I didn't get the
"S" character. It seems to transmit fine for the first 257K of 384K,
then it stalls out badly. The transfer doesn't fail (according to
hyperterm), but the rate drops way down to almost a stop. I looked at
the RS232 lines with a scope and the signal levels look ok for the
first 257K, but at that point transmission does indeed stop.
Seems like the first issue is that I'm not getting the "S" character,
so maybe something's going on with the macro execution...?
I checked all the PPC clocks and they look ok. They are identical to
those compared to a good roach1 board.
Has anyone else ever had this problem? Any ideas on what could be
going on?
Thanks in advance!
Jason