Re: [OSL | CCIE_Voice] CCM 6.x Virtual Machine
sounds like you ethernet interface which is in bridge group are not connected to network. you can greate loopback interface and bind VMnet0 to it instead of physical ethernet interface. google loopback in Windows assuming that your VM runs on Microsoft OS. cheers - Original Message - From: Balamurugan Singaram To: ccie_voice@onlinestudylist.com Sent: Wednesday, March 05, 2008 12:03 AM Subject: [OSL | CCIE_Voice] CCM 6.x Virtual Machine Hi, I have tried accessing CCM 6.x Pre-configured Virtual Machine, However when I power on the image it gives the following error: The network bridge on device VMnet 0 is temporarily down because the bridged ethernet interface is down. Could please let me know how to assign the IPaddress to Pre-configured Virtual CCM 6.x image. Thanks, Bala. Send instant messages to your online friends http://uk.messenger.yahoo.com
Re: [OSL | CCIE_Voice] CCM 6.x Virtual Machine
Hi Vovan, I have create window loopback interface, how bind VMnet0 to loopback interface. Thanks, Bala. Vovan L [EMAIL PROTECTED] wrote: sounds like you ethernet interface which is in bridge group are not connected to network. you can greate loopback interface and bind VMnet0 to it instead of physical ethernet interface. google loopback in Windows assuming that your VM runs on Microsoft OS. cheers - Original Message - From: Balamurugan Singaram To: ccie_voice@onlinestudylist.com Sent: Wednesday, March 05, 2008 12:03 AM Subject: [OSL | CCIE_Voice] CCM 6.x Virtual Machine Hi, I have tried accessing CCM 6.x Pre-configured Virtual Machine, However when I power on the image it gives the following error: The network bridge on device VMnet 0 is temporarily down because the bridged ethernet interface is down. Could please let me know how to assign the IPaddress to Pre-configured Virtual CCM 6.x image. Thanks, Bala. Send instant messages to your online friends http://uk.messenger.yahoo.com Send instant messages to your online friends http://uk.messenger.yahoo.com
[OSL | CCIE_Voice] unassigned DN numbers
hi all, does anyone know if there is a way to automatically delete unassigned DN numbers from CCM? regards, Juan
[OSL | CCIE_Voice] (no subject)
You cannot configure a zone prefix when you have e.164 numbers registered to the gatekeeper, so you can configure them to not register themselves, however, if you configure an ATA as a gateway, is there a way to also not register the extensions. C7200-GK(config-gk)#zone prefix local 020...Zone local contains active E164 registrations. Zone prefix change not allowed at this time. C7200-GK#sho gatekeeper endpoints GATEKEEPER ENDPOINT REGISTRATION CallSignalAddr Port RASSignalAddr Port Zone Name Type Flags --- - --- - - - 10.2.6.41 1720 10.2.6.41 1719 local TERM ENDPOINT-ID: 638C77E40005 VERSION: 2 AGE: 163 secs SupportsAnnexE: FALSE E164-ID: 200010.2.6.41 1721 10.2.6.41 1739 local TERM ENDPOINT-ID: 63A80B86 VERSION: 2 AGE: 163 secs SupportsAnnexE: FALSE E164-ID: 2001 http://www.easypost.com Anti-Virus Anti-Spam Web Mail thats hotter than hot
Re: [OSL | CCIE_Voice] unassigned DN numbers
Other than going to the Route Plan report and doing a search for unassigned dns in the first drop down and then chooseing Delete All Found? Nope sorry Mark Snow Sr Technical Instructor IPexpert, Inc. Sent from my iPhone On Mar 5, 2008, at 5:23 AM, Juan Lopez Hernandez -X (jlopezhe - IBM - INS at Cisco) [EMAIL PROTECTED] wrote: hi all, does anyone know if there is a way to automatically delete unassigned DN numbers from CCM? regards, Juan
Re: [OSL | CCIE_Voice] (no subject)
This is correct - but a simple - shut, configure, no shut - will do the trick :) IOS allows this as of 12.4.15T btw. Mark Snow Sr Technical Instructor IPexpert, Inc. Sent from my iPhone On Mar 5, 2008, at 6:48 AM, Mike Reid [EMAIL PROTECTED] wrote: You cannot configure a zone prefix when you have e.164 numbers registered to the gatekeeper, so you can configure them to not register themselves, however, if you configure an ATA as a gateway, is there a way to also not register the extensions. C7200-GK(config-gk)#zone prefix local 020... Zone local contains active E164 registrations. Zone prefix change not allowed at this time. C7200-GK#sho gatekeeper endpoints GATEKEEPER ENDPOINT REGISTRATION CallSignalAddr Port RASSignalAddr Port Zone Name TypeFlags --- - --- - - - 10.2.6.41 1720 10.2.6.41 1719 local TERM ENDPOINT-ID: 638C77E40005 VERSION: 2 AGE: 163 secs SupportsAnnexE: FALSE E164-ID: 2000 10.2.6.41 1721 10.2.6.41 1739 local TERM ENDPOINT-ID: 63A80B86 VERSION: 2 AGE: 163 secs SupportsAnnexE: FALSE E164-ID: 2001 http://www.easypost.com Anti-Virus Anti-Spam Web Mail thats hotter than hot
Re: [OSL | CCIE_Voice] CCM 6.x Virtual Machine
Hi, VM-Ware server [CCM 4.x] IPAddress 172.168.x.x, I have created windows loopback address and assign the address in VMConsole as: HOST - Virtual Network Editor - VMNET0: Microsoft loopback adapter, but from windows server I am not able to ping VM-Server 172.168.x.x, could please suggest me the solution. Thanks, Bala. Vovan L [EMAIL PROTECTED] wrote: sounds like you ethernet interface which is in bridge group are not connected to network. you can greate loopback interface and bind VMnet0 to it instead of physical ethernet interface. google loopback in Windows assuming that your VM runs on Microsoft OS. cheers - Original Message - From: Balamurugan Singaram To: ccie_voice@onlinestudylist.com Sent: Wednesday, March 05, 2008 12:03 AM Subject: [OSL | CCIE_Voice] CCM 6.x Virtual Machine Hi, I have tried accessing CCM 6.x Pre-configured Virtual Machine, However when I power on the image it gives the following error: The network bridge on device VMnet 0 is temporarily down because the bridged ethernet interface is down. Could please let me know how to assign the IPaddress to Pre-configured Virtual CCM 6.x image. Thanks, Bala. Send instant messages to your online friends http://uk.messenger.yahoo.com Send instant messages to your online friends http://uk.messenger.yahoo.com
[OSL | CCIE_Voice] Transcoding Issues
Hello, On CME router, I have an inbound G.279/H323 dialpeer for 3xxx and an outbound G.711/SIP dialpeer for CUE. Directed and forwarded calls from HQ or BR1 to CUE worked because of the local transcoder resource that transcoded the 2 different call legs. However, if i had an inbound G.729/H323 dialpeer for 3xxx and an outbound G.711/H323 dialpeer for the AA pilot number, the call from HQ or BR1 did not go through because the 2 different call legs did not get transcoded. So my question is it not possible to transcode between 2 different codecs for the same protocol? On the CUE case, the transcoder worked because of the 2 different codecs and different protocols. On the AA case, the transcoder did not work, so i assumed it had something to do with the same protocol. Does anyone know? JD _ Connect and share in new ways with Windows Live. http://www.windowslive.com/share.html?ocid=TXT_TAGHM_Wave2_sharelife_012008
Re: [OSL | CCIE_Voice] Transcoding Issues
Hi JD: Actually I tested and worked, what I had was: CCM -- h323 G729 (GK Controlled) --- CME -- H323 Dial-peer G711 to B-ACD I just configured the transcodec resources and the IPIPGW feature, do you have the allow H323 to H323 command under the voice service? Do a debug voip dialpeer to see what dial-peers are matched by the call. Regards, Jose From: [EMAIL PROTECTED]: [EMAIL PROTECTED]: Wed, 5 Mar 2008 13:41:29 -0800Subject: [OSL | CCIE_Voice] Transcoding Issues Hello, On CME router, I have an inbound G.279/H323 dialpeer for 3xxx and an outbound G.711/SIP dialpeer for CUE. Directed and forwarded calls from HQ or BR1 to CUE worked because of the local transcoder resource that transcoded the 2 different call legs. However, if i had an inbound G.729/H323 dialpeer for 3xxx and an outbound G.711/H323 dialpeer for the AA pilot number, the call from HQ or BR1 did not go through because the 2 different call legs did not get transcoded. So my question is it not possible to transcode between 2 different codecs for the same protocol? On the CUE case, the transcoder worked because of the 2 different codecs and different protocols. On the AA case, the transcoder did not work, so i assumed it had something to do with the same protocol. Does anyone know? JD Connect and share in new ways with Windows Live. Get it now! _ Express yourself instantly with MSN Messenger! Download today it's FREE! http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/
Re: [OSL | CCIE_Voice] HOW TO RESTORE IPCC TO INITIAL WIZARD
Delete the profile from DC Directory. Jonathan On Wed, Mar 5, 2008 at 3:06 PM, Sanchez Galarza, Gustavo - (Col) [EMAIL PROTECTED] wrote: Hi: Is there any way to restore the IPCC installation to the initial setup wizard after it is configured the first time? Thanks Gustavo Sánchez
Re: [OSL | CCIE_Voice] CME: BACD Issue
Hi Mark, It is possible to get cme b-acd to run in dynamips? Thanks. On Fri, Feb 29, 2008 at 11:06 PM, Mark Snow [EMAIL PROTECTED] wrote: Try this incoming DP (remove the DID and port number) dial-peer voice 20 pots service aa incoming called-number 88373000 Mark Snow CCIE #14073 (Voice, Security) CCSI #31583 Senior Technical Instructor - IPexpert, Inc. A Cisco Learning Partner - We Accept Learning Credits! Telephone: +1.810.326.1444 Fax: +1.309.413.4097 Mailto: [EMAIL PROTECTED] IPexpert - The Global Leader in Self-Study, Classroom-Based, Video On Demand and Audio Certification Training Tools for the Cisco CCIE RS Lab, CCIE Security Lab, CCIE Service Provider Lab , CCIE Voice Lab and CCIE Storage Lab Certifications. On Feb 29, 2008, at 7:43 AM, Kumar, Narinder wrote: Hi, I have the below config but when I dial the pilot number 88373000, I hear a dead silence for 30 seconds than fast busy tone. Can anyone suggest what's wrong?? dial-peer voice 20 pots service aa incoming called-number 88373000 direct-inward-dial port 0/3/0:0 ! application service queue flash:app-b-acd-2.1.2.2.tcl param queue-len 20 param number-of-hunt-grps 1 param aa-hunt2 3020 ! service aa flash:app-b-acd-aa-2.1.2.2.tcl paramspace english index 1 param number-of-hunt-grps 1 param handoff-string aa param dial-by-extension-option 3 paramspace english language en param max-time-vm-retry 2 param aa-pilot 88373000 param max-extension-length 4 paramspace english location flash: param second-greeting-time 30 param welcome-prompt _bacd_welcome.au param call-retry-timer 15 param voice-mail 5000 param max-time-call-retry 600 param service-name queue Regards NK
[OSL | CCIE_Voice] B-ACD issue
Hello, All I am trying to send an incoming call from the B-ACD queue to voicemail. here is my config application service queue flash:app-b-acd-2.1.0.0.tcl param aa-hunt3 3004 param queue-len 10 param queue-manager-debugs 1 param aa-hunt2 3210 param number-of-hunt-grps 2 ! service aa flash:app-b-acd-aa-2.1.0.0.tcl paramspace english index 1 param number-of-hunt-grps 2 param dial-by-extension-option 5 param handoff-string aa paramspace english language en param max-time-vm-retry 2 param aa-pilot 3017773000 param max-extension-length 4 paramspace english location flash: param second-greeting-time 30 param welcome-prompt _bacd_options_menu.au param call-retry-timer 15 param max-time-call-retry 60 param voice-mail 53210 param service-name queue ! voice translation-rule 2 rule 1 /^53210$/ /3210/ voice translation-profile REDIRECT translate calling 2 translate called 2 translate redirect-called 2 ephone-dn 8 number 53210 no-reg both call-forward all 3600 ! dial-peer voice 36 voip translation-profile outgoing REDIRECT destination-pattern 3600 session protocol sipv2 session target ipv4:10.2.120.2 incoming called-number 399[89] dtmf-relay sip-notify codec g711ulaw no vad ! dial-peer voice 37 voip translation-profile outgoing VM destination-pattern 3017773[126].. session protocol sipv2 session target ipv4:10.2.120.2 dtmf-relay sip-notify codec g711ulaw no vad So the issue I am having is when my call gets forwarded to voicemail it is dialing 3017773600 and thus matches dial-peer 37, as soon as I take dialplan pattern off from the telephony-service, call matches dial-peer 36 inturn matches the voice translation-rule and life is good. Really stuck on this one. Any help will be appreciated
Re: [OSL | CCIE_Voice] CCM 6.x Virtual Machine
Hi, VMServer IP Address - 172.16.130.86/24 default gateway 172.16.130.1, I am having windows loop back ipaddress 172.16.130.87/24 in the following subnet, the VMneto is mapped to window loop back [172.16.130.87/24] address, reboot both vmserver and windows server 2003 but I am not able to ping the VM-CUCM server 172.16.130.86. Note - when the VMware server run, two virtual networks [vmnet1 and vmnet8] are coming up, they are in different subnet 192.168.x.x. Could please let me know what I am missing. Thanks, Vovan L [EMAIL PROTECTED] wrote: please provide ipconfig /all - Original Message - From: Balamurugan Singaram To: ccie_voice@onlinestudylist.com Sent: Wednesday, March 05, 2008 8:39 AM Subject: Re: [OSL | CCIE_Voice] CCM 6.x Virtual Machine Hi, VM-Ware server [CCM 4.x] IPAddress 172.168.x.x, I have created windows loopback address and assign the address in VMConsole as: HOST - Virtual Network Editor - VMNET0: Microsoft loopback adapter, but from windows server I am not able to ping VM-Server 172.168.x.x, could please suggest me the solution. Thanks, Bala. Vovan L [EMAIL PROTECTED] wrote: sounds like you ethernet interface which is in bridge group are not connected to network. you can greate loopback interface and bind VMnet0 to it instead of physical ethernet interface. google loopback in Windows assuming that your VM runs on Microsoft OS. cheers - Original Message - From: Balamurugan Singaram To: ccie_voice@onlinestudylist.com Sent: Wednesday, March 05, 2008 12:03 AM Subject: [OSL | CCIE_Voice] CCM 6.x Virtual Machine Hi, I have tried accessing CCM 6.x Pre-configured Virtual Machine, However when I power on the image it gives the following error: The network bridge on device VMnet 0 is temporarily down because the bridged ethernet interface is down. Could please let me know how to assign the IPaddress to Pre-configured Virtual CCM 6.x image. Thanks, Bala. Send instant messages to your online friends http://uk.messenger.yahoo.com Send instant messages to your online friends http://uk.messenger.yahoo.com Send instant messages to your online friends http://uk.messenger.yahoo.com
