[OSL | CCIE_Voice] Help on IPExpert Lab5
I am working on lab 5 of the IPExpert workbook and I can not seem to get audio to cut through when initiating a call from an HQ IP Phone to the ATA. The ATA is registered as a terminal to the GK. When calling from the HQ phone, the ATA rings and when answered, ringback stops on the IP phone so signaling seems to be working properly but the audio path never gets established. Any guidance on this would be appreciated. Thanks. . Scott Hardesty | Presidio Networked Solutions | E-mail [EMAIL PROTECTED] | Voice: 443-789-1219
Re: [OSL | CCIE_Voice] Help on IPExpert Lab5
Hi Scott If you are using IPIPGW, try configure the H225 Trunk in the CCM with the following - Media Termination Point Required : Checked - Retry Video Call as Audio : Checked - Wait for Far End H.245 Terminal Capability Set : Uncheked Also, ensure you have disabled the proxy in the gatekeeper configuration with: No use-proxy ATA-GK default inbound-to-terminal No use-proxy ATA-GK default outbound-from-terminal De: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] En nombre de Hardesty, Scott Enviado el: 28 May 2008 08:05 Para: ccie_voice@onlinestudylist.com Asunto: [OSL | CCIE_Voice] Help on IPExpert Lab5 I am working on lab 5 of the IPExpert workbook and I can not seem to get audio to cut through when initiating a call from an HQ IP Phone to the ATA. The ATA is registered as a terminal to the GK. When calling from the HQ phone, the ATA rings and when answered, ringback stops on the IP phone so signaling seems to be working properly but the audio path never gets established. Any guidance on this would be appreciated. Thanks. . Scott Hardesty | Presidio Networked Solutions | E-mail [EMAIL PROTECTED] | Voice: 443-789-1219
Re: [OSL | CCIE_Voice] help on ipexpert 5
again. Ovais Iqbal 416-294-7869 Sent from my BlackBerry device -Original Message- From: Ovais Iqbal [EMAIL PROTECTED] Date: Wed, 28 May 2008 00:10:27 To:Christian Narvaez [EMAIL PROTECTED] Cc:ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] B-ACD call fails Thanks for your time and assistance, I will try it with the changes. Ovais Iqbal 416-294-7869 Sent from my BlackBerry device -Original Message- From: Christian Narvaez [EMAIL PROTECTED] Date: Tue, 27 May 2008 17:46:36 To:ovais Iqbal [EMAIL PROTECTED] Cc:ccie_voice@onlinestudylist.com Subject: RE: [OSL | CCIE_Voice] B-ACD call fails Hello Ovais, I just checked your config. ? What I see is that you are missing some parameters in the service ,at least for the moment I see the ?param voicemail? missing in the aa service, If you don?t configure it the service doesn?t work. ? I recommend you to copypaste the example config in the readme file located in the flash, and try to use all the parameters in that example. ? De: ovais Iqbal [mailto:[EMAIL PROTECTED] Enviado el: 27 May 2008 11:12 Para: Christian Narvaez Asunto: Re: [OSL | CCIE_Voice] B-ACD call fails ? Hi Christian, ? Thanks for assisting, the config is attached. There may be some dial-peer mess in here but I tried to look as much as possible. ? You will see Incoming Called Number as well as Destination-Pattern command for service aa dial-peer, I have tried with either or but could not get it to work. ? Thanks ? Ovais. ? On 5/27/08, Christian Narvaez [EMAIL PROTECTED] mailto:[EMAIL PROTECTED] wrote: HI Ovais, Plase send your configuration, ? De: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] mailto:[EMAIL PROTECTED] ] En nombre de ovais Iqbal Enviado el: 27 May 2008 10:14 Para: OSL CCIE Voice Lab Exam Asunto: [OSL | CCIE_Voice] B-ACD call fails ? Hi Group, ? I have tried to configure B-ACD based on IpExpert workbook task # 14.9 but it seems that I always have issues with B-ACD, this time when I call from the PSTN phone, it connects?but?right away gets?disconnect. Any idea what could be going on? I am using IOS 12.4(5b) IpVoice and CME 3.3 and TCL 2.1.0.0. ? Thanks -- Ovais Iqbal 416-294-7869 -- Ovais Iqbal 416-294-7869 -- Message: 3 Date: Wed, 28 May 2008 08:04:53 -0400 From: Hardesty, Scott [EMAIL PROTECTED] Subject: [OSL | CCIE_Voice] Help on IPExpert Lab5 To: ccie_voice@onlinestudylist.com Message-ID: [EMAIL PROTECTED] Content-Type: text/plain; charset=us-ascii I am working on lab 5 of the IPExpert workbook and I can not seem to get audio to cut through when initiating a call from an HQ IP Phone to the ATA. The ATA is registered as a terminal to the GK. When calling from the HQ phone, the ATA rings and when answered, ringback stops on the IP phone so signaling seems to be working properly but the audio path never gets established. Any guidance on this would be appreciated. Thanks. . Scott Hardesty | Presidio Networked Solutions | E-mail [EMAIL PROTECTED] | Voice: 443-789-1219 -- next part -- An HTML attachment was scrubbed... URL: http://onlinestudylist.com/pipermail/ccie_voice/attachments/20080528/44c 94103/attachment-0001.html -- Message: 4 Date: Wed, 28 May 2008 09:31:39 -0400 From: Christian Narvaez [EMAIL PROTECTED] Subject: Re: [OSL | CCIE_Voice] Help on IPExpert Lab5 To: OSL CCIE Voice Lab Exam ccie_voice@onlinestudylist.com Message-ID: [EMAIL PROTECTED] Content-Type: text/plain; charset=us-ascii Hi Scott If you are using IPIPGW, try configure the H225 Trunk in the CCM with the following - Media Termination Point Required : Checked - Retry Video Call as Audio : Checked - Wait for Far End H.245 Terminal Capability Set : Uncheked Also, ensure you have disabled the proxy in the gatekeeper configuration with: No use-proxy ATA-GK default inbound-to-terminal No use-proxy ATA-GK default outbound-from-terminal De: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] En nombre de Hardesty, Scott Enviado el: 28 May 2008 08:05 Para: ccie_voice@onlinestudylist.com Asunto: [OSL | CCIE_Voice] Help on IPExpert Lab5 I am working on lab 5 of the IPExpert workbook and I can not seem to get audio to cut through when initiating a call from an HQ IP Phone to the ATA. The ATA is registered as a terminal to the GK. When calling from the HQ phone, the ATA rings and when answered, ringback stops on the IP phone so signaling seems to be working properly but the audio path never gets established. Any guidance on this would be appreciated. Thanks
Re: [OSL | CCIE_Voice] Unity 4.0(5) - VM Selection
Another way to achieve this is as followed: 1. Configured a customized VM Profile for the extension that you are going to forward to call from. 2. Create a CTI RP to forward all to VM. 3. Create a Unity Call Handler and transfer the call to the intended subscriber's VM. For example, if i want to forward all calls from extension 1003 to the voicemail of subscriber 2003, then I would do the followings: 1. I would create a VM profile named vm72xxx with mask 72xxx. 2. Configure my extension 1003 with the VM profile vm72xxx and forward all to 72003. 3. I would create a CTI RP with a pattern of 7 and forward all to VM. 4. On Unity, I would create a Call Handler with extension 72003. Under the Greetings section, select Blank for source and After the greeting, send the caller to Send to greeting for subscriber 2003. That should do it! JD Date: Mon, 19 May 2008 12:44:11 -0700From: [EMAIL PROTECTED]: [EMAIL PROTECTED]: [EMAIL PROTECTED]: Re: [OSL | CCIE_Voice] Unity 4.0(5) - VM Selection I agree. It should suffice for the scope of the lab though. In real life you could always do it on a gateway… still ugly though. Greg Jost Network Consulting Engineer Unified Communications Practice Cisco Systems, Inc. 214-274-1922 From: Christian Narvaez [mailto:[EMAIL PROTECTED] Sent: Monday, May 19, 2008 8:46 AMTo: Gregory Jost (grjost)Cc: [EMAIL PROTECTED]: RE: [OSL | CCIE_Voice] Unity 4.0(5) - VM Selection Thanks Gregory!I just tested your recommendation in my lab and it worked. The only constrain is that due to is not valid to use wildcards in the CTI_RP, the voicemail where the call is redirected will be fixed. Then it would be needed N number of Pilot Points/CTI_RP for N number of phones in cases is required the ability to forward the call to ANY voicemail. It would be nice to find a way to avoid that.Have a good week-Original Message-From: Gregory Jost (grjost) [mailto:[EMAIL PROTECTED]: Sun 5/18/2008 1:34 PMTo: Gregory Jost (grjost); Christian NarvaezCc: [EMAIL PROTECTED]: RE: [OSL | CCIE_Voice] Unity 4.0(5) - VM SelectionI'm sorry, I misinformed you. You can't use wildcards and the CTI RP isn't arbitrary (e.g. TCD isn't really redirecting to CTI RP). I had this working on 4.2 in my customer's environment, but hadn't tried it on 4.1 until now.Here's my lab config:1. Create CTI RP *1003 with VM mask and CFA to VM.2. Create PP 71003 and add *1003 as Always Route Member.3. Associate PP and CTI RP to AC user.4. Set Keep Original Called Party If Forwarded=False5. Ensure Reset Original Called Party on Redirect=True (default).6. Restart TCD service.Enjoy!Greg JostNetwork Consulting EngineerUnified Communications PracticeCisco Systems, Inc.214-274-1922From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Gregory Jost (grjost)Sent: Friday, May 16, 2008 4:49 PMTo: Christian NarvaezCc: [EMAIL PROTECTED]: Re: [OSL | CCIE_Voice] Unity 4.0(5) - VM SelectionDid you rsetart TCD service? What's happening? If you still can't get it to work, make the PP explicit (e.g. 71001). When it overwrites the RDNIS, it may us the PP instead of the called party. Also, the pattern of the CTI RP is arbitrary, as the RDNIS is retained from the PP. -Original Message-From: Christian Narvaez [mailto:[EMAIL PROTECTED]: Friday, May 16, 2008 12:45 PM Pacific Standard TimeTo: Gregory Jost (grjost)Cc: [EMAIL PROTECTED]:RE: [OSL | CCIE_Voice] Unity 4.0(5) - VM SelectionThanks Gregory,Just to make sure I understood. The procedure you´re proposing is the following:1 - Create a CTI_RP # ForwardAll to the Unity, and with a VM Profile with mask 2 - Create a Attendant Console Pilot Point 73 - To that Pilot Point assign the member # (The CTI_RP)4 - Create the User ac with associated devices i)the Pilot Point and ii)the CTI_RP5 - In the TCD Service Parameters, modify the Keep Original Called Party If Forwarded to FALSE. (By Default it is TRUE)6 - Manually CallForwardAll the Phone to for example the number 71001 (Then When I call the phone , the VM 1001 should answer)Well, I am trying to make work this solution, but till this moment doesnt work for me.Am I missing something ?-Original Message-From: Gregory Jost (grjost) [mailto:[EMAIL PROTECTED]: Fri 5/16/2008 12:51 PMTo: Christian Narvaez; Mark SnowCc: [EMAIL PROTECTED]: RE: [OSL | CCIE_Voice] Unity 4.0(5) - VM SelectionUse AC PP/Hunt Group containing CTI RP w/CFA to VM and change thefollowing TCD service parameter:Keep Original Called Party If Forwarded :This parameter determines whether the directory number (DN) of theoriginal called party gets reset to the redirected number if the call isforwarded to the Pilot Point. Valid values specify True (do not resetthe original called party) or False (reset the
[OSL | CCIE_Voice] off topic - All email's twice
Does anyone else get every email on this list twice? I have contacted support and asked them to look at it. Have also unsubscribed multiple times and resubscribed with different email address. Simple things. Cheers S
[OSL | CCIE_Voice] lab equipments
hello, I have just passed my voice written exam, and i am preparing for the lab, i need the list of all equipments that i will use in lab
Re: [OSL | CCIE_Voice] lab equipments
Checkout this link http://www.cisco.com/web/learning/le3/ccie/voice/lab_equipment.html De: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] En nombre de Marwa Ahmed Enviado el: 28 May 2008 18:03 Para: ccie_voice@onlinestudylist.com Asunto: [OSL | CCIE_Voice] lab equipments hello, I have just passed my voice written exam, and i am preparing for the lab, i need the list of all equipments that i will use in lab
Re: [OSL | CCIE_Voice] CAD installation PDF
Thank you. On Wed, May 28, 2008 at 6:12 PM, Randy Banaria [EMAIL PROTECTED] wrote: Onur, CAD is available on the desktop. On Wed, May 28, 2008 at 11:08 PM, Onur Tufekci [EMAIL PROTECTED] wrote: Does anybody know if the CAD installation pdf guide is on the desktop now? -- Kind Regards, Randy Banaria 07752839106
[OSL | CCIE_Voice] Host not found
If the phone registered to subscriber and the services URL is pointing to publisher then I get Host Not Found Error. If the phone is registered to pub then everything is alright. Is this normal?
Re: [OSL | CCIE_Voice] Host not found
Onur, Did you change in the Enterprise Parameters to use the IP of the Publisher and not the name in the Services section? It is using the name by default but has to be changed to the IP for it to work http://10.x.200.21/ insetad of http://CCMPUBLISHER. --- Onur Tufekci [EMAIL PROTECTED] wrote: If the phone registered to subscriber and the services URL is pointing to publisher then I get Host Not Found Error. If the phone is registered to pub then everything is alright. Is this normal? Jacob Owen CCIE #14063 (RS, Service Provider), CCVP, CCDP
Re: [OSL | CCIE_Voice] Host not found
Thank you for your reply, Yes I did change the parameter to IP address of the publisher. This only happens when phone is registered to sub. Thanks, Onur On Wed, May 28, 2008 at 6:20 PM, Jacob Owen [EMAIL PROTECTED] wrote: Onur, Did you change in the Enterprise Parameters to use the IP of the Publisher and not the name in the Services section? It is using the name by default but has to be changed to the IP for it to work http://10.x.200.21/ insetad of http://CCMPUBLISHER. --- Onur Tufekci [EMAIL PROTECTED] wrote: If the phone registered to subscriber and the services URL is pointing to publisher then I get Host Not Found Error. If the phone is registered to pub then everything is alright. Is this normal? Jacob Owen CCIE #14063 (RS, Service Provider), CCVP, CCDP
Re: [OSL | CCIE_Voice] lab equipments
http://www.cisco.com/web/learning/le3/ccie/voice/lab_equipment.html - Original Message From: Marwa Ahmed [EMAIL PROTECTED] To: ccie_voice@onlinestudylist.com Sent: Wednesday, May 28, 2008 6:02:58 PM Subject: [OSL | CCIE_Voice] lab equipments hello, I have just passed my voice written exam, and i am preparing for the lab, i need the list of all equipments that i will use in lab
Re: [OSL | CCIE_Voice] Q25.59 : Extension Mobility
Several questions in the practice and lab are not valid Real World examples. Sometimes you need to not over think the question and just do what is asked. I would simply apply a CSS to the device and nothing to the profile Ed - Original Message From: Juan [EMAIL PROTECTED] To: OSL CCIE Voice Lab Exam ccie_voice@onlinestudylist.com Sent: Wednesday, May 28, 2008 1:19:33 PM Subject: [OSL | CCIE_Voice] Q25.59 : Extension Mobility hi, regarding Q25.59: it asks to configure EM with 'the user's calling restriction should be preserved'. Does that mean that HQ device profile must have the same restriction as HQ phn2 (on which it will probably be applied), and that BR2 device profile mimics the restrictions of BR1 phn2? This then also makes the assumption the user will not log into a HQ phone with a BR1 device profile. Can anyone explain the question - as it doesn't make much sense to me at the moment... kind regards, Juan
Re: [OSL | CCIE_Voice] off topic - All email's twice
Sometimes, It depends if the person replying does a reply all or a reply. Also I have noticed this happens with messages from Mark the most. I say no big deal. Ed - Original Message From: Stephen Collinson [EMAIL PROTECTED] To: ccie_voice@onlinestudylist.com Sent: Wednesday, May 28, 2008 12:36:32 PM Subject: [OSL | CCIE_Voice] off topic - All email's twice Does anyone else get every email on this list twice? I have contacted support and asked them to look at it. Have also unsubscribed multiple times and resubscribed with different email address. Simple things….. Cheers S
Re: [OSL | CCIE_Voice] Host not found
I took a break for an hour and now looks like it works!! On Wed, May 28, 2008 at 6:31 PM, Jacob Owen [EMAIL PROTECTED] wrote: Onur, Did you fix the SQL issue between the Pub/Sub? To ensure your phones are getting the correct URL go to the Settings on your phone then 3 for Network Configuration then to 29 which should show you your Services URL. If it is incorrect try resetting the phone and see if it changes to the correct URL. --- Onur Tufekci [EMAIL PROTECTED] wrote: Thank you for your reply, Yes I did change the parameter to IP address of the publisher. This only happens when phone is registered to sub. Thanks, Onur On Wed, May 28, 2008 at 6:20 PM, Jacob Owen [EMAIL PROTECTED] wrote: Onur, Did you change in the Enterprise Parameters to use the IP of the Publisher and not the name in the Services section? It is using the name by default but has to be changed to the IP for it to work http://10.x.200.21/ insetad of http://CCMPUBLISHER. --- Onur Tufekci [EMAIL PROTECTED] wrote: If the phone registered to subscriber and the services URL is pointing to publisher then I get Host Not Found Error. If the phone is registered to pub then everything is alright. Is this normal? Jacob Owen CCIE #14063 (RS, Service Provider), CCVP, CCDP Jacob Owen CCIE #14063 (RS, Service Provider), CCVP, CCDP
[OSL | CCIE_Voice] univercd URL
Hi, Could we able to open the Cisco IOS Voice Configuration Library in lab, since the URL is en/us/docs/ http://www.cisco.com/en/US/docs/ios/12_3/vvf_c/cisco_ios_voice_configuratio n_library_glossary/vcl.htm. Thank you, Bala. Send instant messages to your online friends http://uk.messenger.yahoo.com
