Onur, just curious where this ended up.
On Mon, Jul 7, 2008 at 4:36 PM, Jonathan Charles [EMAIL PROTECTED] wrote:
Post a show diag, I think your DSPs may be hosed... prob bad
firmware but this is a WAG
Jonathan
On Mon, Jul 7, 2008 at 9:41 AM, Onur Tufekci [EMAIL PROTECTED]
wrote:
And this is if I do it other way around:
router2(config-dspfarm-profile)#dspfarm profile 2
router2(config-dspfarm-profile)#shut
Disabling profile will disconnect active TRANSCODING calls,
do you want to continue ? [yes/no]y
router2(config-dspfarm-profile)#
router2(config-dspfarm-profile)#
router2(config-dspfarm-profile)#dspfarm profile 1
router2(config-dspfarm-profile)#no shut
router2(config-dspfarm-profile)#dspfarm profile 2
router2(config-dspfarm-profile)#no shut
Enabling profile failed due to insufficient TRANSCODING resources,
resources available to support 0 sessions; please modify the
configuration and retry
router2(config-dspfarm-profile)#
On Mon, Jul 7, 2008 at 10:39 AM, Onur Tufekci [EMAIL PROTECTED]
wrote:
Here is the configuration and results:
router2(config)#do show run
Building configuration...
Current configuration : 2938 bytes
!
! Last configuration change at 15:11:09 UTC Mon Jul 7 2008
! NVRAM config last updated at 14:49:04 UTC Mon Jul 7 2008
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname router2
!
boot-start-marker
boot-end-marker
!
card type t1 0 0
no logging console
enable secret 5 $1$7cJ4$U9gWuPCv.H1DPdXYIyWJD0
!
no aaa new-model
!
resource policy
!
network-clock-participate wic 0
!
!
ip cef
!
!
no ip domain lookup
!
isdn switch-type primary-ni
!
voice-card 0
dspfarm
dsp services dspfarm
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
controller T1 0/0/0
framing esf
linecode b8zs
!
controller T1 0/0/1
framing esf
linecode b8zs
!
!
!
!
interface FastEthernet0/0
ip address 192.168.2.1 255.255.255.0
duplex full
speed 100
h323-gateway voip bind srcaddr 192.168.2.1
!
interface FastEthernet0/1
description Management_IP
ip address 192.168.10.2 255.255.255.0
duplex full
speed 100
!
interface Service-Engine1/0
no ip address
shutdown
!
ip route 192.168.1.0 255.255.255.0 192.168.10.1
ip route 192.168.3.0 255.255.255.0 192.168.10.3
!
ip http server
no ip http secure-server
!
!
!
!
control-plane
!
!
!
!
!
sccp local FastEthernet0/0
sccp ccm 192.168.2.1 identifier 1
sccp
!
sccp ccm group 1
associate ccm 1 priority 1
associate profile 2 register xcoder
associate profile 1 register conference
!
dspfarm profile 2 transcode
codec g711ulaw
codec g729r8
maximum sessions 4
associate application SCCP
shutdown
!
dspfarm profile 1 conference
codec g711ulaw
codec g729r8
maximum sessions 1
associate application SCCP
shutdown
!
!
dial-peer voice 1000 voip
answer-address 1...
destination-pattern 1...
session target ipv4:192.168.1.1
codec g711ulaw
!
dial-peer voice 9 pots
destination-pattern 9T
incoming called-number 14345552...
direct-inward-dial
!
!
!
telephony-service
max-ephones 2
max-dn 2
ip source-address 192.168.2.1 port 2000
auto assign 1 to 2
system message Your current options
sdspfarm units 5
sdspfarm tag 1 xcoder
sdspfarm tag 2 conference
dialplan-pattern 1 14345552... extension-length 4
max-conferences 8 gain -6
call-forward pattern .T
web admin system name cisco password cisco
dn-webedit
time-webedit
transfer-system full-consult
transfer-pattern .T
secondary-dialtone 9
!
!
ephone-dn 1 dual-line
number 2001
description 14345552001
name Gil Grissom
!
!
router2(config)#dspfarm
router2(config)#
router2(config)#
router2(config)#
router2(config)#dspfarm pro 2
router2(config-dspfarm-profile)#no shut
router2(config-dspfarm-profile)#dspfarm pro 1
router2(config-dspfarm-profile)#no shut
Enabling profile failed due to insufficient CONFERENCING resources,
resources available to support 0 sessions; please modify the
configuration and retry
router2(config-dspfarm-profile)#do show inv
NAME: 2811 chassis, DESCR: 2811 chassis
PID: CISCO2811 , VID: V03 , SN: FHK103671CU
NAME: VWIC2-2MFT-T1/E1 - 2-Port RJ-48 Multiflex Trunk - T1/E1 on Slot 0
SubSlot 0, DESCR: VWIC2-2MFT-T1/E1 - 2-Port RJ-48 Multiflex Trunk -
T1/E1
PID: VWIC2-2MFT-T1/E1 , VID: V01 , SN: FOC102540TY
NAME: PVDMII DSP SIMM with one DSP on Slot 0 SubSlot 4, DESCR: PVDMII
DSP SIMM with one DSP
PID: PVDM2-16 , VID: V01 , SN: FOC1032054R
NAME: NM-SE on Slot 1, DESCR: NM-SE
PID: NM-CUE, VID: V03, SN: FOC10120B2E
NAME: 40GB IDE Disc Daughter Card on Slot 1 SubSlot 0, DESCR: 40GB
IDE
Disc
