[OSL | CCIE_Voice] Lab 9a - IPMA CTI Route Point fails to register
Hi everyone, The IPMA / CTI Route Point seem to be setup as per the lab 9a. However although the route point do not register. Restarted all servers and CTIManager but nothing changes I've been looking through the CTI trace logs, but nothing stands out Any tips on what to try/test please ? -- Cheers, kiwi ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Lab 9a - IPMA CTI Route Point fails to register
It should show as unregistered with an IP address next to it (if you are in the CTI Route Point Find screen). Do you have the IP address? If so, it is all good. On Thu, Apr 22, 2010 at 7:31 PM, Mad Kiwi ccievoi...@gmail.com wrote: Hi everyone, The IPMA / CTI Route Point seem to be setup as per the lab 9a. However although the route point do not register. Restarted all servers and CTIManager but nothing changes I've been looking through the CTI trace logs, but nothing stands out Any tips on what to try/test please ? -- Cheers, kiwi ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Lab 9a - IPMA CTI Route Point fails to register
I take that back. I was comparing it to my current CM/CUE lab which I forgot was in SRST mode... My bad. On Thu, Apr 22, 2010 at 7:48 PM, Roger Henderson rhender...@gmail.comwrote: It should show as unregistered with an IP address next to it (if you are in the CTI Route Point Find screen). Do you have the IP address? If so, it is all good. On Thu, Apr 22, 2010 at 7:31 PM, Mad Kiwi ccievoi...@gmail.com wrote: Hi everyone, The IPMA / CTI Route Point seem to be setup as per the lab 9a. However although the route point do not register. Restarted all servers and CTIManager but nothing changes I've been looking through the CTI trace logs, but nothing stands out Any tips on what to try/test please ? -- Cheers, kiwi ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Lab 9a - IPMA CTI Route Point fails to register
Hi: Did you add the cti route point at ipma service parameter? You have to do it at both pub and sub server becouse this parameter is not clusterwide and apply only to one server hth Date: Thu, 22 Apr 2010 19:31:55 +1000 From: ccievoi...@gmail.com To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] Lab 9a - IPMA CTI Route Point fails to register Hi everyone, The IPMA / CTI Route Point seem to be setup as per the lab 9a. However although the route point do not register. Restarted all servers and CTIManager but nothing changes I've been looking through the CTI trace logs, but nothing stands out Any tips on what to try/test please ? -- Cheers, kiwi _ Hotmail: Powerful Free email with security by Microsoft. https://signup.live.com/signup.aspx?id=60969___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Lab 9a - IPMA CTI Route Point fails to register
Hi, Yes I have added the cti route point in the ipma service parameter, on both servers. Regards kiwi On Thu, Apr 22, 2010 at 8:22 PM, Angel Perez gorr...@hotmail.com wrote: Hi: Did you add the cti route point at ipma service parameter? You have to do it at both pub and sub server becouse this parameter is not clusterwide and apply only to one server hth -- Date: Thu, 22 Apr 2010 19:31:55 +1000 From: ccievoi...@gmail.com To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] Lab 9a - IPMA CTI Route Point fails to register Hi everyone, The IPMA / CTI Route Point seem to be setup as per the lab 9a. However although the route point do not register. Restarted all servers and CTIManager but nothing changes I've been looking through the CTI trace logs, but nothing stands out Any tips on what to try/test please ? -- Cheers, kiwi -- Hotmail: Powerful Free email with security by Microsoft. Get it now.https://signup.live.com/signup.aspx?id=60969 -- Cheers, kiwi ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] UCCX Integration with CUCME
Does anyone know where I would create the AXL user in CUCME for an integration with UCCX? I'm guessing that it would be a typical username: username axl-user password IamTired? -- *Matthew Berry* /A+, CCENT, CCNA, CCNA Voice, CCVP, CCIE Voice Written/ *_Vitals:_* *GVoice: *+1.612.424.5044 *Gmail*: ciscovoiceg...@gmail.com *Skype*: ciscovoiceguru *Twitter*: ciscovoiceguru *_Cert Stats:_* Cisco Cert Journey Began: Jan 1, 2009 1st Lab Attempt: Aug 16, 2010 ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] UCCX Scripting
It's possiblebut you'll have to change the way in which you provide the 1 for customer support and the option to dial-by-extension since your extensions begin with 1 as well. Just a bit like building an algorithm.think it out clearly first. Please see the following link for the CCX scripting information you'll need. http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_7_0/user/guide/uccx70edgs.pdf Thank you. greg -Original Message- From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Cristobal Priego Sent: Wednesday, April 21, 2010 7:45 PM To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] UCCX Scripting Hello All, I have 2 questions for you I need to create a script for an AA, the main prompt will allow the user to dial the extension if the know it or wait to listen to the menu options for the menu I need to use a menu step no big deal, and i'm thinking to create a variable that will store the digits the customer pressed and then with a call transfer try to reach that extension. however my problem or question comes how do i merge this 2 options together, allow the caller to dial the extension while at the same time know when he presses 1 for customer service and is not trying to reach ext 1002 ? also is there a way to prompt the option to the caller if he is in the queue to leave a vm, however instead of leaving a vm record the prompt, put it on an e-mail and then sent it to a queue and then have the e-mail to be delivered to the next available agent ? I don't think it's possible but the sales engineer sold this option and i have to implement it and i just don't think is possible maybe you've done it before or something similar thanks Cristobal ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Help login into CUC via CLI
I fat fingered my CLI administration account for Unity Conn 7. I can access CUC administration VIA Web portal but that is it. Does anyone have a CLI PW recovery method to share? Chris On Apr 20, 2010, at 8:52 PM, Omotayo wrote: Hello, I usually have issue logging into the CUE via GUI. When i supply the ip add of the loopback and the username and password entered under the telephony-service i get Loin into callmanger as administrator failed When i use vlan 400, i get same result below is my config voice service voip allow-connections h323 to h323 allow-connections h323 to sip allow-connections sip to h323 allow-connections sip to sip sip bind control source-interface Vlan400 bind media source-interface Vlan400 ! ip http server ip http authentication local no ip http secure-server ip http path FLASH:/GUI telephony-service sdspfarm units 2 sdspfarm transcode sessions 2 sdspfarm tag 1 Sitec-conf no privacy conference hardware no auto-reg-ephone max-ephones 5 max-dn 10 ip source-address 10.10.202.1 port 2000 time-zone 42 voicemail 3600 max-conferences 8 gain -6 call-forward pattern .T web admin system name admin password cisco dn-webedit time-webedit transfer-system full-consult transfer-pattern .T create cnf-files version-stamp 7960 Apr 21 2010 08:41:40 ! ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] UCCX Integration with CUCME
It's been forever since I've done anything with CM+UCCX but I believe its: xml user user-name password password privilege-level 15 On Thu, Apr 22, 2010 at 6:51 AM, Matthew Berry ciscovoiceg...@gmail.com wrote: Does anyone know where I would create the AXL user in CUCME for an integration with UCCX? I'm guessing that it would be a typical username: username axl-user password IamTired? -- Matthew Berry A+, CCENT, CCNA, CCNA Voice, CCVP, CCIE Voice Written Vitals: GVoice: +1.612.424.5044 Gmail: ciscovoiceg...@gmail.com Skype: ciscovoiceguru Twitter: ciscovoiceguru Cert Stats: Cisco Cert Journey Began: Jan 1, 2009 1st Lab Attempt: Aug 16, 2010 ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] UCCX Integration with CUCME
err, s/CM/CME On Thu, Apr 22, 2010 at 8:38 AM, Tanner Ezell tanner.ez...@gmail.com wrote: It's been forever since I've done anything with CM+UCCX but I believe its: xml user user-name password password privilege-level 15 On Thu, Apr 22, 2010 at 6:51 AM, Matthew Berry ciscovoiceg...@gmail.com wrote: Does anyone know where I would create the AXL user in CUCME for an integration with UCCX? I'm guessing that it would be a typical username: username axl-user password IamTired? -- Matthew Berry A+, CCENT, CCNA, CCNA Voice, CCVP, CCIE Voice Written Vitals: GVoice: +1.612.424.5044 Gmail: ciscovoiceg...@gmail.com Skype: ciscovoiceguru Twitter: ciscovoiceguru Cert Stats: Cisco Cert Journey Began: Jan 1, 2009 1st Lab Attempt: Aug 16, 2010 ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com -- Cheers, Tanner Ezell ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] UCCX Integration with CUCME
Also I should clarify, that is under 'telephony-service'. On Thu, Apr 22, 2010 at 8:38 AM, Tanner Ezell tanner.ez...@gmail.com wrote: It's been forever since I've done anything with CM+UCCX but I believe its: xml user user-name password password privilege-level 15 On Thu, Apr 22, 2010 at 6:51 AM, Matthew Berry ciscovoiceg...@gmail.com wrote: Does anyone know where I would create the AXL user in CUCME for an integration with UCCX? I'm guessing that it would be a typical username: username axl-user password IamTired? -- Matthew Berry A+, CCENT, CCNA, CCNA Voice, CCVP, CCIE Voice Written Vitals: GVoice: +1.612.424.5044 Gmail: ciscovoiceg...@gmail.com Skype: ciscovoiceguru Twitter: ciscovoiceguru Cert Stats: Cisco Cert Journey Began: Jan 1, 2009 1st Lab Attempt: Aug 16, 2010 ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com -- Cheers, Tanner Ezell ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Help login into CUC via CLI
https://supportforums.cisco.com/thread/296857 Thanks MikeN On Thu, Apr 22, 2010 at 6:06 AM, bontacommunications bontacommunicati...@gmail.com wrote: I fat fingered my CLI administration account for Unity Conn 7. I can access CUC administration VIA Web portal but that is it. Does anyone have a CLI PW recovery method to share? Chris On Apr 20, 2010, at 8:52 PM, Omotayo wrote: Hello, I usually have issue logging into the CUE via GUI. When i supply the ip add of the loopback and the username and password entered under the telephony-service i get Loin into callmanger as administrator failed When i use vlan 400, i get same result below is my config voice service voip allow-connections h323 to h323 allow-connections h323 to sip allow-connections sip to h323 allow-connections sip to sip sip bind control source-interface Vlan400 bind media source-interface Vlan400 ! ip http server ip http authentication local no ip http secure-server ip http path FLASH:/GUI telephony-service sdspfarm units 2 sdspfarm transcode sessions 2 sdspfarm tag 1 Sitec-conf no privacy conference hardware no auto-reg-ephone max-ephones 5 max-dn 10 ip source-address 10.10.202.1 port 2000 time-zone 42 voicemail 3600 max-conferences 8 gain -6 call-forward pattern .T web admin system name admin password cisco dn-webedit time-webedit transfer-system full-consult transfer-pattern .T create cnf-files version-stamp 7960 Apr 21 2010 08:41:40 ! ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] Vol2 Lab1 4.2 issue
47BE3E70 Apr 22 18:12:56.163: //-1//CCAPI/cc_free_feature_vsa: Apr 22 18:12:56.163: vsacount in free is 1 Apr 22 18:12:56.163: //11/00A447F51600/CCAPI/cc_api_call_disconnect_done: Disposition=0, Interface=0x48899FB8, Tag=0x0, Call Id=11, Call Entry(Disconnect Cause=47, Voice Class Cause Code=0, Retry Count=0) Apr 22 18:12:56.167: //11/00A447F51600/CCAPI/cc_api_call_disconnect_done: Call Disconnect Event Sent Apr 22 18:12:56.167: //-1//CCAPI/cc_free_feature_vsa: Apr 22 18:12:56.167: :cc_free_feature_vsa freeing 47BE3F50 Apr 22 18:12:56.167: //-1//CCAPI/cc_free_feature_vsa: Apr 22 18:12:56.167: vsacount in free is 0 I have tried ticking require mtp and using faststart on a g729codec on the trunk and the same thing is happening. Thanks for the help. Cheers Kev ccie_voice-requ...@onlinestudylist.com wrote: Send CCIE_Voice mailing list submissions to ccie_voice@onlinestudylist.com To subscribe or unsubscribe via the World Wide Web, visit http://onlinestudylist.com/mailman/listinfo/ccie_voice or, via email, send a message with subject or body 'help' to ccie_voice-requ...@onlinestudylist.com You can reach the person managing the list at ccie_voice-ow...@onlinestudylist.com When replying, please edit your Subject line so it is more specific than Re: Contents of CCIE_Voice digest... Today's Topics: 1. Lab 9a - IPMA CTI Route Point fails to register (Mad Kiwi) 2. Re: Lab 9a - IPMA CTI Route Point fails to register (Roger Henderson) 3. Re: Lab 9a - IPMA CTI Route Point fails to register (Roger Henderson) 4. Re: Lab 9a - IPMA CTI Route Point fails to register (Angel Perez) 5. Re: Lab 9a - IPMA CTI Route Point fails to register (Mad Kiwi) 6. UCCX Integration with CUCME (Matthew Berry) -- Message: 1 Date: Thu, 22 Apr 2010 19:31:55 +1000 From: Mad Kiwi ccievoi...@gmail.com Subject: [OSL | CCIE_Voice] Lab 9a - IPMA CTI Route Point fails to register To: OSL Group ccie_voice@onlinestudylist.com Message-ID: i2lcb331f6e1004220231o58bb7e8dmfb9c06195810d...@mail.gmail.com Content-Type: text/plain; charset=iso-8859-1 Hi everyone, The IPMA / CTI Route Point seem to be setup as per the lab 9a. However although the route point do not register. Restarted all servers and CTIManager but nothing changes I've been looking through the CTI trace logs, but nothing stands out Any tips on what to try/test please ? -- Cheers, kiwi -- next part -- An HTML attachment was scrubbed... URL: http://onlinestudylist.com/pipermail/ccie_voice/attachments/20100422/f7cc4b6a/attachment-0001.htm -- Message: 2 Date: Thu, 22 Apr 2010 19:48:55 +1000 From: Roger Henderson rhender...@gmail.com Subject: Re: [OSL | CCIE_Voice] Lab 9a - IPMA CTI Route Point fails to register To: Mad Kiwi ccievoi...@gmail.com Cc: OSL Group ccie_voice@onlinestudylist.com Message-ID: u2jb39b6fd51004220248o2b2a7981g58d027993f735...@mail.gmail.com Content-Type: text/plain; charset=iso-8859-1 It should show as unregistered with an IP address next to it (if you are in the CTI Route Point Find screen). Do you have the IP address? If so, it is all good. On Thu, Apr 22, 2010 at 7:31 PM, Mad Kiwi ccievoi...@gmail.com wrote: Hi everyone, The IPMA / CTI Route Point seem to be setup as per the lab 9a. However although the route point do not register. Restarted all servers and CTIManager but nothing changes I've been looking through the CTI trace logs, but nothing stands out Any tips on what to try/test please ? -- Cheers, kiwi ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com -- next part -- An HTML attachment was scrubbed... URL: http://onlinestudylist.com/pipermail/ccie_voice/attachments/20100422/1b677e2b/attachment-0001.htm -- Message: 3 Date: Thu, 22 Apr 2010 19:53:18 +1000 From: Roger Henderson rhender...@gmail.com Subject: Re: [OSL | CCIE_Voice] Lab 9a - IPMA CTI Route Point fails to register To: Mad Kiwi ccievoi...@gmail.com Cc: OSL Group ccie_voice@onlinestudylist.com Message-ID: s2rb39b6fd51004220253hb2a7fcd2u20e4bac93eeb7...@mail.gmail.com Content-Type: text/plain; charset=iso-8859-1 I take that back. I was comparing it to my current CM/CUE lab which I forgot was in SRST mode... My bad. On Thu, Apr 22, 2010 at 7:48 PM, Roger Henderson rhender...@gmail.comwrote: It should show as unregistered with an IP address next to it (if you are in the CTI Route Point Find screen). Do you have the IP address? If so, it is all good. On Thu, Apr 22, 2010 at 7:31 PM, Mad Kiwi ccievoi
[OSL | CCIE_Voice] FRF12 Calculation Clarification
There is a huge number of posts on this, and explanations are all over the board. Trying to get a definitive answer. When calculating the size of LLQ AND utilizing FRF.12. Is the Layer 2 overhead 4 bytes for Frame Relay or 8 Bytes. SRND states 8 Solution Guides appear to use 4 or 7. One post indicates if configured properly voice packets will not be fragmented therefore use standard Frame Relay overhead of 4 bytes. This seems logicalThanks ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Help login into CUC via CLI
thank you. On Apr 22, 2010, at 10:10 AM, miken miken wrote: https://supportforums.cisco.com/thread/296857 Thanks MikeN On Thu, Apr 22, 2010 at 6:06 AM, bontacommunications bontacommunicati...@gmail.com wrote: I fat fingered my CLI administration account for Unity Conn 7. I can access CUC administration VIA Web portal but that is it. Does anyone have a CLI PW recovery method to share? Chris On Apr 20, 2010, at 8:52 PM, Omotayo wrote: Hello, I usually have issue logging into the CUE via GUI. When i supply the ip add of the loopback and the username and password entered under the telephony-service i get Loin into callmanger as administrator failed When i use vlan 400, i get same result below is my config voice service voip allow-connections h323 to h323 allow-connections h323 to sip allow-connections sip to h323 allow-connections sip to sip sip bind control source-interface Vlan400 bind media source-interface Vlan400 ! ip http server ip http authentication local no ip http secure-server ip http path FLASH:/GUI telephony-service sdspfarm units 2 sdspfarm transcode sessions 2 sdspfarm tag 1 Sitec-conf no privacy conference hardware no auto-reg-ephone max-ephones 5 max-dn 10 ip source-address 10.10.202.1 port 2000 time-zone 42 voicemail 3600 max-conferences 8 gain -6 call-forward pattern .T web admin system name admin password cisco dn-webedit time-webedit transfer-system full-consult transfer-pattern .T create cnf-files version-stamp 7960 Apr 21 2010 08:41:40 ! ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com bontacommunications bontacommunicati...@gmail.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] FRF12 Calculation Clarification
In addition to Jeff question, is there a better way to remember these calculations for different scenarios (codec type, L2 link, cRTP,etc). I am sorry if this is repost. Regards, Rohan -Original Message- From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of ccie_voice-requ...@onlinestudylist.com Sent: Thursday, April 22, 2010 10:37 AM To: ccie_voice@onlinestudylist.com Subject: CCIE_Voice Digest, Vol 50, Issue 121 Send CCIE_Voice mailing list submissions to ccie_voice@onlinestudylist.com To subscribe or unsubscribe via the World Wide Web, visit http://onlinestudylist.com/mailman/listinfo/ccie_voice or, via email, send a message with subject or body 'help' to ccie_voice-requ...@onlinestudylist.com You can reach the person managing the list at ccie_voice-ow...@onlinestudylist.com When replying, please edit your Subject line so it is more specific than Re: Contents of CCIE_Voice digest... Today's Topics: 1. FRF12 Calculation Clarification (Jeff Cotter) 2. Re: Help login into CUC via CLI (bontacommunications) 3. Re: Vol2 Lab1 4.2 issue (Angel Perez) -- Message: 1 Date: Thu, 22 Apr 2010 07:17:58 -0700 From: Jeff Cotter jcot...@voxns.com Subject: [OSL | CCIE_Voice] FRF12 Calculation Clarification To: osl osl ccie_voice@onlinestudylist.com Message-ID: 54cc1bd3093b6e41b86926c1657432f18d1da...@ssfex1 Content-Type: text/plain; charset=us-ascii There is a huge number of posts on this, and explanations are all over the board. Trying to get a definitive answer. When calculating the size of LLQ AND utilizing FRF.12. Is the Layer 2 overhead 4 bytes for Frame Relay or 8 Bytes. SRND states 8 Solution Guides appear to use 4 or 7. One post indicates if configured properly voice packets will not be fragmented therefore use standard Frame Relay overhead of 4 bytes. This seems logicalThanks -- next part -- An HTML attachment was scrubbed... URL: http://onlinestudylist.com/pipermail/ccie_voice/attachments/20100422/0e397ed1/attachment-0001.htm -- Message: 2 Date: Thu, 22 Apr 2010 10:30:29 -0400 From: bontacommunications bontacommunicati...@gmail.com Subject: Re: [OSL | CCIE_Voice] Help login into CUC via CLI To: miken miken mi...@sisna.com Cc: OSL Group ccie_voice@onlinestudylist.com Message-ID: 83e299ba-2367-4f05-a22c-b2d007cc2...@gmail.com Content-Type: text/plain; charset=us-ascii thank you. On Apr 22, 2010, at 10:10 AM, miken miken wrote: https://supportforums.cisco.com/thread/296857 Thanks MikeN On Thu, Apr 22, 2010 at 6:06 AM, bontacommunications bontacommunicati...@gmail.com wrote: I fat fingered my CLI administration account for Unity Conn 7. I can access CUC administration VIA Web portal but that is it. Does anyone have a CLI PW recovery method to share? Chris On Apr 20, 2010, at 8:52 PM, Omotayo wrote: Hello, I usually have issue logging into the CUE via GUI. When i supply the ip add of the loopback and the username and password entered under the telephony-service i get Loin into callmanger as administrator failed When i use vlan 400, i get same result below is my config voice service voip allow-connections h323 to h323 allow-connections h323 to sip allow-connections sip to h323 allow-connections sip to sip sip bind control source-interface Vlan400 bind media source-interface Vlan400 ! ip http server ip http authentication local no ip http secure-server ip http path FLASH:/GUI telephony-service sdspfarm units 2 sdspfarm transcode sessions 2 sdspfarm tag 1 Sitec-conf no privacy conference hardware no auto-reg-ephone max-ephones 5 max-dn 10 ip source-address 10.10.202.1 port 2000 time-zone 42 voicemail 3600 max-conferences 8 gain -6 call-forward pattern .T web admin system name admin password cisco dn-webedit time-webedit transfer-system full-consult transfer-pattern .T create cnf-files version-stamp 7960 Apr 21 2010 08:41:40 ! ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com bontacommunications bontacommunicati...@gmail.com -- next part -- An HTML attachment was scrubbed... URL: http://onlinestudylist.com/pipermail/ccie_voice/attachments/20100422/55bc7563/attachment-0001.htm -- Message: 3 Date: Thu, 22 Apr 2010 14:34:27 + From: Angel Perez gorr...@hotmail.com Subject: Re: [OSL | CCIE_Voice] Vol2 Lab1 4.2 issue To: kevin.hobson2...@ntlworld.com, osl osl ccie_voice@onlinestudylist.com Cc: ccie_voice
Re: [OSL | CCIE_Voice] Vol2 Lab1 4.2 issue
=TRUE, Cause Value=47) Apr 22 18:12:56.151: //11/00A447F51600/CCAPI/cc_api_get_transfer_info: Transfer Number Is Null Apr 22 18:12:56.163: //12/00A447F51600/CCAPI/cc_api_call_disconnect_done: Disposition=0, Interface=0x48899FB8, Tag=0x0, Call Id=12, Call Entry(Disconnect Cause=47, Voice Class Cause Code=0, Retry Count=0) Apr 22 18:12:56.163: //12/00A447F51600/CCAPI/cc_api_call_disconnect_done: Call Disconnect Event Sent Apr 22 18:12:56.163: //-1//CCAPI/cc_free_feature_vsa: Apr 22 18:12:56.163: :cc_free_feature_vsa freeing 47BE3E70 Apr 22 18:12:56.163: //-1//CCAPI/cc_free_feature_vsa: Apr 22 18:12:56.163: vsacount in free is 1 Apr 22 18:12:56.163: //11/00A447F51600/CCAPI/cc_api_call_disconnect_done: Disposition=0, Interface=0x48899FB8, Tag=0x0, Call Id=11, Call Entry(Disconnect Cause=47, Voice Class Cause Code=0, Retry Count=0) Apr 22 18:12:56.167: //11/00A447F51600/CCAPI/cc_api_call_disconnect_done: Call Disconnect Event Sent Apr 22 18:12:56.167: //-1//CCAPI/cc_free_feature_vsa: Apr 22 18:12:56.167: :cc_free_feature_vsa freeing 47BE3F50 Apr 22 18:12:56.167: //-1//CCAPI/cc_free_feature_vsa: Apr 22 18:12:56.167: vsacount in free is 0 I have tried ticking require mtp and using faststart on a g729codec on the trunk and the same thing is happening. Thanks for the help. Cheers Kev ccie_voice-requ...@onlinestudylist.com wrote: Send CCIE_Voice mailing list submissions to ccie_voice@onlinestudylist.com To subscribe or unsubscribe via the World Wide Web, visit http://onlinestudylist.com/mailman/listinfo/ccie_voice or, via email, send a message with subject or body 'help' to ccie_voice-requ...@onlinestudylist.com You can reach the person managing the list at ccie_voice-ow...@onlinestudylist.com When replying, please edit your Subject line so it is more specific than Re: Contents of CCIE_Voice digest... Today's Topics: 1. Lab 9a - IPMA CTI Route Point fails to register (Mad Kiwi) 2. Re: Lab 9a - IPMA CTI Route Point fails to register (Roger Henderson) 3. Re: Lab 9a - IPMA CTI Route Point fails to register (Roger Henderson) 4. Re: Lab 9a - IPMA CTI Route Point fails to register (Angel Perez) 5. Re: Lab 9a - IPMA CTI Route Point fails to register (Mad Kiwi) 6. UCCX Integration with CUCME (Matthew Berry) -- Message: 1 Date: Thu, 22 Apr 2010 19:31:55 +1000 From: Mad Kiwi ccievoi...@gmail.com Subject: [OSL | CCIE_Voice] Lab 9a - IPMA CTI Route Point fails to register To: OSL Group ccie_voice@onlinestudylist.com Message-ID: i2lcb331f6e1004220231o58bb7e8dmfb9c06195810d...@mail.gmail.com Content-Type: text/plain; charset=iso-8859-1 Hi everyone, The IPMA / CTI Route Point seem to be setup as per the lab 9a. However although the route point do not register. Restarted all servers and CTIManager but nothing changes I've been looking through the CTI trace logs, but nothing stands out Any tips on what to try/test please ? -- Cheers, kiwi -- next part -- An HTML attachment was scrubbed... URL: http://onlinestudylist.com/pipermail/ccie_voice/attachments/20100422/f7cc4b6a/attachment-0001.htm -- Message: 2 Date: Thu, 22 Apr 2010 19:48:55 +1000 From: Roger Henderson rhender...@gmail.com Subject: Re: [OSL | CCIE_Voice] Lab 9a - IPMA CTI Route Point fails to register To: Mad Kiwi ccievoi...@gmail.com Cc: OSL Group ccie_voice@onlinestudylist.com Message-ID: u2jb39b6fd51004220248o2b2a7981g58d027993f735...@mail.gmail.com Content-Type: text/plain; charset=iso-8859-1 It should show as unregistered with an IP address next to it (if you are in the CTI Route Point Find screen). Do you have the IP address? If so, it is all good. On Thu, Apr 22, 2010 at 7:31 PM, Mad Kiwi ccievoi...@gmail.com wrote: Hi everyone, The IPMA / CTI Route Point seem to be setup as per the lab 9a. However although the route point do not register. Restarted all servers and CTIManager but nothing changes I've been looking through the CTI trace logs, but nothing stands out Any tips on what to try/test please ? -- Cheers, kiwi ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com -- next part -- An HTML attachment was scrubbed... URL: http://onlinestudylist.com/pipermail/ccie_voice/attachments/20100422/1b677e2b/attachment-0001.htm -- Message: 3 Date: Thu, 22 Apr 2010 19:53:18 +1000 From: Roger Henderson rhender...@gmail.com Subject: Re: [OSL | CCIE_Voice] Lab 9a - IPMA CTI Route Point fails to register To: Mad Kiwi ccievoi...@gmail.com Cc: OSL Group ccie_voice@onlinestudylist.com
[OSL | CCIE_Voice] cBarge on CME not working - says message Failed to setup barge
cBarge on CME - - eph-dn octoline - conf hardware in telephony service - privacy off on ephone to be bacrged into - ephon-temp remote-in-use to have cBArge key - apply eph-temp to eph Error message says message Failed to setup barge ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Vol2 Lab1 4.2 issue (ccieid1ot)
/CCAPI/cc_api_set_xcode_stream: Apr 22 18:12:46.199: cc_api_set_xcode_stream Line: 4474 Apr 22 18:12:46.199: //11//CCAPI/cc_api_get_xcode_stream: Apr 22 18:12:46.199: cc_api_get_xcode_stream : 4452 Apr 22 18:12:46.227: //12/00A447F51600/CCAPI/cc_api_event_indication: Event=157, Call Id=12 Apr 22 18:12:46.227: //12/00A447F51600/CCAPI/cc_api_event_indication: Event Is Sent To Conferenced SPI(s) Directly Apr 22 18:12:46.235: //12/00A447F51600/CCAPI/cc_api_caps_ack: Destination Interface=0x0, Destination Call Id=-1, Source Call Id=12, Caps(Codec=gsmefr(0x0), Fax Rate=Invalid(0x0), Vad=Invalid(0x0), Modem=OFF(0x0), Codec Bytes=0, Signal Type=0, Seq Num Start=0) Apr 22 18:12:56.147: //11/00A447F51600/CCAPI/cc_api_call_disconnected: Cause Value=47, Interface=0x48899FB8, Call Id=11 Apr 22 18:12:56.147: //11/00A447F51600/CCAPI/cc_api_call_disconnected: Call Entry(Responsed=TRUE, Cause Value=47, Retry Count=0) Apr 22 18:12:56.147: //12/00A447F51600/CCAPI/ccCallDisconnect: Cause Value=47, Tag=0x0, Call Entry(Previous Disconnect Cause=0, Disconnect Cause=0) Apr 22 18:12:56.147: //12/00A447F51600/CCAPI/ccCallDisconnect: Cause Value=47, Call Entry(Responsed=TRUE, Cause Value=47) Apr 22 18:12:56.147: //12/00A447F51600/CCAPI/cc_api_get_transfer_info: Transfer Number Is Null Apr 22 18:12:56.147: //11/00A447F51600/CCAPI/ccCallDisconnect: Cause Value=47, Tag=0x0, Call Entry(Previous Disconnect Cause=0, Disconnect Cause=47) Apr 22 18:12:56.151: //11/00A447F51600/CCAPI/ccCallDisconnect: Cause Value=47, Call Entry(Responsed=TRUE, Cause Value=47) Apr 22 18:12:56.151: //11/00A447F51600/CCAPI/cc_api_get_transfer_info: Transfer Number Is Null Apr 22 18:12:56.163: //12/00A447F51600/CCAPI/cc_api_call_disconnect_done: Disposition=0, Interface=0x48899FB8, Tag=0x0, Call Id=12, Call Entry(Disconnect Cause=47, Voice Class Cause Code=0, Retry Count=0) Apr 22 18:12:56.163: //12/00A447F51600/CCAPI/cc_api_call_disconnect_done: Call Disconnect Event Sent Apr 22 18:12:56.163: //-1//CCAPI/cc_free_feature_vsa: Apr 22 18:12:56.163: :cc_free_feature_vsa freeing 47BE3E70 Apr 22 18:12:56.163: //-1//CCAPI/cc_free_feature_vsa: Apr 22 18:12:56.163: vsacount in free is 1 Apr 22 18:12:56.163: //11/00A447F51600/CCAPI/cc_api_call_disconnect_done: Disposition=0, Interface=0x48899FB8, Tag=0x0, Call Id=11, Call Entry(Disconnect Cause=47, Voice Class Cause Code=0, Retry Count=0) Apr 22 18:12:56.167: //11/00A447F51600/CCAPI/cc_api_call_disconnect_done: Call Disconnect Event Sent Apr 22 18:12:56.167: //-1//CCAPI/cc_free_feature_vsa: Apr 22 18:12:56.167: :cc_free_feature_vsa freeing 47BE3F50 Apr 22 18:12:56.167: //-1//CCAPI/cc_free_feature_vsa: Apr 22 18:12:56.167: vsacount in free is 0 I have tried ticking require mtp and using faststart on a g729codec on the trunk and the same thing is happening. Thanks for the help. Cheers Kev ccie_voice-requ...@onlinestudylist.com wrote: Send CCIE_Voice mailing list submissions to ccie_voice@onlinestudylist.com To subscribe or unsubscribe via the World Wide Web, visit http://onlinestudylist.com/mailman/listinfo/ccie_voice or, via email, send a message with subject or body 'help' to ccie_voice-requ...@onlinestudylist.com You can reach the person managing the list at ccie_voice-ow...@onlinestudylist.com When replying, please edit your Subject line so it is more specific than Re: Contents of CCIE_Voice digest... Today's Topics: 1. Lab 9a - IPMA CTI Route Point fails to register (Mad Kiwi) 2. Re: Lab 9a - IPMA CTI Route Point fails to register (Roger Henderson) 3. Re: Lab 9a - IPMA CTI Route Point fails to register (Roger Henderson) 4. Re: Lab 9a - IPMA CTI Route Point fails to register (Angel Perez) 5. Re: Lab 9a - IPMA CTI Route Point fails to register (Mad Kiwi) 6. UCCX Integration with CUCME (Matthew Berry) -- Message: 1 Date: Thu, 22 Apr 2010 19:31:55 +1000 From: Mad Kiwi ccievoi...@gmail.com Subject: [OSL | CCIE_Voice] Lab 9a - IPMA CTI Route Point fails to register To: OSL Group ccie_voice@onlinestudylist.com Message-ID: i2lcb331f6e1004220231o58bb7e8dmfb9c06195810d...@mail.gmail.com Content-Type: text/plain; charset=iso-8859-1 Hi everyone, The IPMA / CTI Route Point seem to be setup as per the lab 9a. However although the route point do not register. Restarted all servers and CTIManager but nothing changes I've been looking through the CTI trace logs, but nothing stands out Any tips on what to try/test please ? -- Cheers, kiwi -- next part -- An HTML attachment was scrubbed... URL: http://onlinestudylist.com/pipermail/ccie_voice/attachments/20100422/f7cc4b6a/attachment-0001.htm -- Message: 2 Date: Thu, 22 Apr 2010 19:48:55 +1000 From: Roger Henderson
Re: [OSL | CCIE_Voice] cBarge on CME not working - says messageFailed to setup barge
You also need to configure some ad-hoc conference ephone-dn(s). Then this should work. Jeff From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of vccie2010 Sent: Thursday, April 22, 2010 8:29 AM To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] cBarge on CME not working - says messageFailed to setup barge cBarge on CME - - eph-dn octoline - conf hardware in telephony service - privacy off on ephone to be bacrged into - ephon-temp remote-in-use to have cBArge key - apply eph-temp to eph Error message says message Failed to setup barge ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Vol2 Lab1 4.2 issue
Id=11, Call Entry(Disconnect Cause=47, Voice Class Cause Code=0, Retry Count=0) Apr 22 18:12:56.167: //11/00A447F51600/CCAPI/cc_api_call_disconnect_done: Call Disconnect Event Sent Apr 22 18:12:56.167: //-1//CCAPI/cc_free_feature_vsa: Apr 22 18:12:56.167: :cc_free_feature_vsa freeing 47BE3F50 Apr 22 18:12:56.167: //-1//CCAPI/cc_free_feature_vsa: Apr 22 18:12:56.167: vsacount in free is 0 I have tried ticking require mtp and using faststart on a g729codec on the trunk and the same thing is happening. Thanks for the help. Cheers Kev ccie_voice-requ...@onlinestudylist.com wrote: Send CCIE_Voice mailing list submissions to ccie_voice@onlinestudylist.com To subscribe or unsubscribe via the World Wide Web, visit http://onlinestudylist.com/mailman/listinfo/ccie_voice or, via email, send a message with subject or body 'help' to ccie_voice-requ...@onlinestudylist.com You can reach the person managing the list at ccie_voice-ow...@onlinestudylist.com When replying, please edit your Subject line so it is more specific than Re: Contents of CCIE_Voice digest... Today's Topics: 1. Lab 9a - IPMA CTI Route Point fails to register (Mad Kiwi) 2. Re: Lab 9a - IPMA CTI Route Point fails to register (Roger Henderson) 3. Re: Lab 9a - IPMA CTI Route Point fails to register (Roger Henderson) 4. Re: Lab 9a - IPMA CTI Route Point fails to register (Angel Perez) 5. Re: Lab 9a - IPMA CTI Route Point fails to register (Mad Kiwi) 6. UCCX Integration with CUCME (Matthew Berry) -- Message: 1 Date: Thu, 22 Apr 2010 19:31:55 +1000 From: Mad Kiwi ccievoi...@gmail.com Subject: [OSL | CCIE_Voice] Lab 9a - IPMA CTI Route Point fails to register To: OSL Group ccie_voice@onlinestudylist.com Message-ID: i2lcb331f6e1004220231o58bb7e8dmfb9c06195810d...@mail.gmail.com Content-Type: text/plain; charset=iso-8859-1 Hi everyone, The IPMA / CTI Route Point seem to be setup as per the lab 9a. However although the route point do not register. Restarted all servers and CTIManager but nothing changes I've been looking through the CTI trace logs, but nothing stands out Any tips on what to try/test please ? -- Cheers, kiwi -- next part -- An HTML attachment was scrubbed... URL: http://onlinestudylist.com/pipermail/ccie_voice/attachments/20100422/f7cc4b6 a/attachment-0001.htm -- Message: 2 Date: Thu, 22 Apr 2010 19:48:55 +1000 From: Roger Henderson rhender...@gmail.com Subject: Re: [OSL | CCIE_Voice] Lab 9a - IPMA CTI Route Point fails to register To: Mad Kiwi ccievoi...@gmail.com Cc: OSL Group ccie_voice@onlinestudylist.com Message-ID: u2jb39b6fd51004220248o2b2a7981g58d027993f735...@mail.gmail.com Content-Type: text/plain; charset=iso-8859-1 It should show as unregistered with an IP address next to it (if you are in the CTI Route Point Find screen). Do you have the IP address? If so, it is all good. On Thu, Apr 22, 2010 at 7:31 PM, Mad Kiwi ccievoi...@gmail.com wrote: Hi everyone, The IPMA / CTI Route Point seem to be setup as per the lab 9a. However although the route point do not register. Restarted all servers and CTIManager but nothing changes I've been looking through the CTI trace logs, but nothing stands out Any tips on what to try/test please ? -- Cheers, kiwi ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com -- next part -- An HTML attachment was scrubbed... URL: http://onlinestudylist.com/pipermail/ccie_voice/attachments/20100422/1b677e2 b/attachment-0001.htm -- Message: 3 Date: Thu, 22 Apr 2010 19:53:18 +1000 From: Roger Henderson rhender...@gmail.com Subject: Re: [OSL | CCIE_Voice] Lab 9a - IPMA CTI Route Point fails to register To: Mad Kiwi ccievoi...@gmail.com Cc: OSL Group ccie_voice@onlinestudylist.com Message-ID: s2rb39b6fd51004220253hb2a7fcd2u20e4bac93eeb7...@mail.gmail.com Content-Type: text/plain; charset=iso-8859-1 I take that back. I was comparing it to my current CM/CUE lab which I forgot was in SRST mode... My bad. On Thu, Apr 22, 2010 at 7:48 PM, Roger Henderson rhender...@gmail.comwrote: It should show as unregistered with an IP address next to it (if you are in the CTI Route Point Find screen). Do you have the IP address? If so, it is all good. On Thu, Apr 22, 2010 at 7:31 PM, Mad Kiwi ccievoi...@gmail.com wrote: Hi everyone, The IPMA / CTI Route Point seem to be setup as per the lab 9a. However although the route point do not register. Restarted all servers and CTIManager but nothing changes I've been
Re: [OSL | CCIE_Voice] cBarge on CME not working - says messageFailed to setup barge
Jeff, I tried with that too but no luck. On Thu, Apr 22, 2010 at 9:01 AM, Jeff Price (jeffpric) jeffp...@cisco.comwrote: You also need to configure some ad-hoc conference ephone-dn(s). Then this should work. Jeff *From:* ccie_voice-boun...@onlinestudylist.com [mailto: ccie_voice-boun...@onlinestudylist.com] *On Behalf Of *vccie2010 *Sent:* Thursday, April 22, 2010 8:29 AM *To:* ccie_voice@onlinestudylist.com *Subject:* [OSL | CCIE_Voice] cBarge on CME not working - says messageFailed to setup barge cBarge on CME - - eph-dn octoline - conf hardware in telephony service - privacy off on ephone to be bacrged into - ephon-temp remote-in-use to have cBArge key - apply eph-temp to eph Error message says message Failed to setup barge ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] cBarge on CME not working - says messageFailed to setup barge
SDSPfarm registered? On Thu, Apr 22, 2010 at 11:24 AM, vccie2010 vccie2...@gmail.com wrote: Jeff, I tried with that too but no luck. On Thu, Apr 22, 2010 at 9:01 AM, Jeff Price (jeffpric) jeffp...@cisco.com wrote: You also need to configure some ad-hoc conference ephone-dn(s). Then this should work. Jeff From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of vccie2010 Sent: Thursday, April 22, 2010 8:29 AM To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] cBarge on CME not working - says messageFailed to setup barge cBarge on CME - - eph-dn octoline - conf hardware in telephony service - privacy off on ephone to be bacrged into - ephon-temp remote-in-use to have cBArge key - apply eph-temp to eph Error message says message Failed to setup barge ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] VLAN port speed and duplex
Hi guys, I am just starting my lab prep, and I am at lab 1A. When a port is combined with both voice and data, do we need to manually set port speed and duplex(i.e., 10/half) for the exam? Thank you, Bo ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] VLAN port speed and duplex
For the exam, no. All routing is pre-configured and if there is any issues you need to get the proctor involved. Jeff From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Bo Gao Sent: Thursday, April 22, 2010 10:51 AM To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] VLAN port speed and duplex Hi guys, I am just starting my lab prep, and I am at lab 1A. When a port is combined with both voice and data, do we need to manually set port speed and duplex(i.e., 10/half) for the exam? Thank you, Bo ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Vol2 Lab1 4.2 issue
Kevin, I had this problem yesterday sending calls through my H323 gateway. It turned out to be related to the IP Blue softphones which I'll wager you are using, Kevin as your problem looks mighty similar. With the IP Blue softphones the LAST softphone to startup will be able to send and receive sound - the others won't (at least this is true after any non-initial startups of the phone). The IP Blue softphone that starts last needs to be on the VOIP leg of the call and the silent one on the other leg. This workaround solved my problem (after 8 hours of troubleshooting) and I had the same error code (47) as you did with one end of the call still ringing when the other had answered. Turns out the silent softphone doesn't send an OLC message as part of the H245 setup and that stops the call setup process from working successfully. Then again I could be wrong (again). :) Roger PS I sent this twice because I got a bounce message from the server. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] FRF12 Calculation Clarification
Try the table on this URL: http://www.cisco.com/en/US/tech/tk652/tk698/technologies_tech_note09186a0080094ae2.shtml Roger On Fri, Apr 23, 2010 at 12:17 AM, Jeff Cotter jcot...@voxns.com wrote: There is a huge number of posts on this, and explanations are all over the board. Trying to get a definitive answer. When calculating the size of LLQ AND utilizing FRF.12. Is the Layer 2 overhead 4 bytes for Frame Relay or 8 Bytes. SRND states 8 Solution Guides appear to use 4 or 7. One post indicates if configured properly voice packets will not be fragmented therefore use standard Frame Relay overhead of 4 bytes. This seems logical……..Thanks ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] UCCX Applications
All - Has anyone ever used the Busy and No Answer applications in UCCX? I'm having a hard time figuring out their real-world use. Matthew Berry /A+, CCENT, CCNA, CCNA Voice, CCVP, CCIE Written/ *Gmail:* ciscovoiceguru *Skype:* ciscovoiceguru *Twitter:* ciscovoiceguru *1st Lab Attempt: *Aug 16, 2010 ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] cBarge on CME not working - says messageFailed to setup barge
yuppI will lab it again and update here. On Thu, Apr 22, 2010 at 9:53 AM, ccieid1ot ccieid...@gmail.com wrote: SDSPfarm registered? On Thu, Apr 22, 2010 at 11:24 AM, vccie2010 vccie2...@gmail.com wrote: Jeff, I tried with that too but no luck. On Thu, Apr 22, 2010 at 9:01 AM, Jeff Price (jeffpric) jeffp...@cisco.com wrote: You also need to configure some ad-hoc conference ephone-dn(s). Then this should work. Jeff From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of vccie2010 Sent: Thursday, April 22, 2010 8:29 AM To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] cBarge on CME not working - says messageFailed to setup barge cBarge on CME - - eph-dn octoline - conf hardware in telephony service - privacy off on ephone to be bacrged into - ephon-temp remote-in-use to have cBArge key - apply eph-temp to eph Error message says message Failed to setup barge ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
