[OSL | CCIE_Voice] IPExpert Workbook vol2
Dear folks, I have a plan to buy ipexpert voice workbooks. Is it really worth to have it.How many simulated labs are avilable in Vol 1 and vol2. explanations are fair ? Regards Tom ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] IPExpert Workbook vol2
Please check ipexpert.com for details. Just wanted to say yes, It is definitly worth to have. Ahmad Azeem Date: Sun, 2 May 2010 10:39:59 +0400 From: tom.c...@gmail.com To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] IPExpert Workbook vol2 Dear folks, I have a plan to buy ipexpert voice workbooks. Is it really worth to have it.How many simulated labs are avilable in Vol 1 and vol2. explanations are fair ? Regards Tom _ http://clk.atdmt.com/UKM/go/195013117/direct/01/ ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] IPExpert Workbook vol2
I doubt you'll pass without it, Tom. The competitor's offerings aren't very good. On Sun, May 2, 2010 at 6:12 PM, A A f...@hotmail.com wrote: Please check ipexpert.com for details. Just wanted to say yes, It is definitly worth to have. Ahmad Azeem -- Date: Sun, 2 May 2010 10:39:59 +0400 From: tom.c...@gmail.com To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] IPExpert Workbook vol2 Dear folks, I have a plan to buy ipexpert voice workbooks. Is it really worth to have it.How many simulated labs are avilable in Vol 1 and vol2. explanations are fair ? Regards Tom -- Get a free e-mail account with Hotmail. Sign-up now. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] IPExpert Workbook vol2
Dear Friends, Thanks for your kind fast replies Actually I bought internetwork expert's both workbook. And I covered all of their lab. Now just want to know is it worth buying one more product. I appreciate if some someone who already attempt the real lab and still suggest me to buy ip expert also. regards Tom On Sun, May 2, 2010 at 12:19 PM, Roger Henderson rhender...@gmail.comwrote: I doubt you'll pass without it, Tom. The competitor's offerings aren't very good. On Sun, May 2, 2010 at 6:12 PM, A A f...@hotmail.com wrote: Please check ipexpert.com for details. Just wanted to say yes, It is definitly worth to have. Ahmad Azeem -- Date: Sun, 2 May 2010 10:39:59 +0400 From: tom.c...@gmail.com To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] IPExpert Workbook vol2 Dear folks, I have a plan to buy ipexpert voice workbooks. Is it really worth to have it.How many simulated labs are avilable in Vol 1 and vol2. explanations are fair ? Regards Tom -- Get a free e-mail account with Hotmail. Sign-up now. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] volume 2 lab1 task 4.2
Hi: Your are missing: voice service voip allow sip to sip all s t h all h t s all h t Then restart gatekeeper (shut/no shut), you will see 10.10.200.3 1720 10.10.200.3 51942 VIA H323-GW -- iptoip gw Then if gk routing is fine the call will proceed Date: Sat, 1 May 2010 15:06:14 -0400 From: kparam2...@gmail.com To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] volume 2 lab1 task 4.2 Hi all, I am working on vol2 lab1, trying to get the call from the HQ site to BR2. I am done with the configs on the HQ for the GK and CUBE and on the BR2 RTR. I am unable to call from 5002 (HQ) to BR2(3006) or 3002. Here are my command output: HQ-RTR# HQ-RTR#show gatek end GATEKEEPER ENDPOINT REGISTRATION CallSignalAddr Port RASSignalAddr Port Zone Name TypeFlags --- - --- - - - 10.10.110.3 1720 10.10.110.3 8 UCME VOIP-GW H323-ID: BR2-RTR Voice Capacity Max.= Avail.= Current.= 0 10.10.200.3 1720 10.10.200.3 51942 VIA VOIP-GW H323-ID: HQ-RTR Voice Capacity Max.= Avail.= Current.= 0 10.10.210.1041157 10.10.210.1033095 UCM VOIP-GW H323-ID: gk-trunk_1 Voice Capacity Max.= Avail.= Current.= 0 10.10.210.1136205 10.10.210.1132802 UCM VOIP-GW H323-ID: gk-trunk_2 Voice Capacity Max.= Avail.= Current.= 0 Total number of active registrations = 4 HQ-RTR#deb gatek main 10 HQ-RTR# May 1 14:53:43.570: ////GK/gk_process: QUEUE_EVENT (minor 0) wakeup May 1 14:53:43.570: ////GK/gk_rassrv_arq: arqp=0x48C47E48,crv=0xA, answerCall=0 May 1 14:53:43.570: ////GK/gk_rassrv_sep_arq: ARQ Didn't use GK_AAA_PROC May 1 14:53:43.570: //00DBE8DB0A00/00DBE8DB0A00/GK/gk_dns_query: No Name servers May 1 14:53:43.570: //00DBE8DB0A00/00DBE8DB0A00/GK/rassrv_get_addrinfo: (3006) Tech-prefix match failed. May 1 14:53:43.570: //00DBE8DB0A00/00DBE8DB0A00/GK/rassrv_get_addrinfo: (3006) Matched zone prefix 3 and remainder 006 May 1 14:53:43.570: ////GK/gk_rassrv_get_ingress_network: returning default ingress network = 1 May 1 14:53:43.570: //00DBE8DB0A00/00DBE8DB0A00/GK/rassrv_arq_select_viazone: about to check the source side, src_zonep=0x48C26658 May 1 14:53:43.570: //00DBE8DB0A00/00DBE8DB0A00/GK/rassrv_arq_select_viazone: matched zone is UCM, and z_invianamelen=0 May 1 14:53:43.570: //00DBE8DB0A00/00DBE8DB0A00/GK/rassrv_arq_select_viazone: about to check the destination side, dst_zonep=0x48C25E20 May 1 14:53:43.570: //00DBE8DB0A00/00DBE8DB0A00/GK/rassrv_arq_select_viazone: matched zone is UCME, and z_outvianamelen=3 May 1 14:53:43.570: //00DBE8DB0A00/00DBE8DB0A00/GK/rassrv_arq_select_viazone and z_outvianamep=VIA May 1 14:53:43.570: //00DBE8DB0A00/00DBE8DB0A00/GK/rassrv_arq_select_viazone: Received ARQ for a zone (UCME) that has an outviazone (VIA) specified. Pick an IP-IP gateway in that viazone. May 1 14:53:43.574: ////GK/gk_gw_select_ipipgw_random: zonep: 0x48CF0E34, tpp: 0x0, current_endpt: 0 May 1 14:53:43.574: ////GK/gk_gw_select_ipipgw_random: Selecting any IPIPGW. qelemp.head=0x485E6BD0, use_count=1, current_endpt=0 May 1 14:53:43.574: ////GK/gk_gw_select_ipipgw_random: qelemp=0x485E6BD0, loop_count=0 May 1 14:53:43.574: ////GK/gk_gw_select_ipipgw_random: Examining tgwp 0x485FA4C4, g_supp_prots: 0x50 qelemp: 0x485E6BD0, loop_count: 1 May 1 14:53:43.574: ////GK/gk_gw_select_ipipgw_random: Searched through the entire gateway list. loop_count=0 May 1 14:53:43.574: ////GK/gk_gw_select_ipipgw_random: Could not find an IPIPGW. May 1 14:53:43.574: //00DBE8DB0A00/00DBE8DB0A00/GK/rassrv_get_addrinfo(3006): Viazone gateway selection failed for zone VIA HQ-RTR# May 1 14:53:43.574: //00DBE8DB0A00/00DBE8DB0A00/GK/gk_rassrv_sep_arq: rassrv_get_addrinfo() failed (return code = 0x805) HQ-RTR# May 1 14:53:44.934: ////GK/gk_process: QUEUE_EVENT (minor 0) wakeup May 1 14:53:45.790: ////GK/gk_process: QUEUE_EVENT (minor 0) wakeup HQ-RTR# May 1 14:53:46.306: ////GK/gk_process: got a TIMER event May 1 14:53:46.306: ////GK/gk_handle_timers May 1 14:53:46.306: ////GK/gk_handle_timers: managed timer expired 0x467BC298 HQ-RTR#show gatek gw-type-prefix GATEWAY TYPE PREFIX TABLE = Prefix: 1#*(Default gateway-technology) Zone UCM master gateway list: 10.10.210.10:41157 gk-trunk_1 10.10.210.11:36205 gk-trunk_2 Zone UCME master gateway list: 10.10.110.3:1720 BR2-RTR I cannot
[OSL | CCIE_Voice] Quick question regarding dial peer zero
Can you completely shutdown dial peer zero just like you can shutdown manually created voice dial peers? Such a command might be helpful during a lab to ensure you don't overlook that pesky feature. Matthew Berry **Sent from my iPhone** Skype/Twitter: ciscovoiceguru Google Voice: +1 612 424 5044 ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] CCIE_Voice Digest, Vol 51, Issue 5
i do not beleive you can shut down dial-peer 0, however it would be good to know if the option is available. Akash Patel Presales Consultant On May 2, 2010, at 12:00 PM, ccie_voice-requ...@onlinestudylist.com wrote: Send CCIE_Voice mailing list submissions to ccie_voice@onlinestudylist.com To subscribe or unsubscribe via the World Wide Web, visit http://onlinestudylist.com/mailman/listinfo/ccie_voice or, via email, send a message with subject or body 'help' to ccie_voice-requ...@onlinestudylist.com You can reach the person managing the list at ccie_voice-ow...@onlinestudylist.com When replying, please edit your Subject line so it is more specific than Re: Contents of CCIE_Voice digest... Today's Topics: 1. Quick question regarding dial peer zero (Matthew Berry) -- Message: 1 Date: Sun, 2 May 2010 06:25:26 -0500 From: Matthew Berry ciscovoiceg...@gmail.com Subject: [OSL | CCIE_Voice] Quick question regarding dial peer zero To: CCIE Voice OSL ccie_voice@onlinestudylist.com Message-ID: a6477e86-8582-41f0-b514-cde59bd41...@gmail.com Content-Type: text/plain; charset=us-ascii; format=flowed; delsp=yes Can you completely shutdown dial peer zero just like you can shutdown manually created voice dial peers? Such a command might be helpful during a lab to ensure you don't overlook that pesky feature. Matthew Berry **Sent from my iPhone** Skype/Twitter: ciscovoiceguru Google Voice: +1 612 424 5044 -- ___ CCIE_Voice mailing list CCIE_Voice@onlinestudylist.com http://onlinestudylist.com/mailman/listinfo/ccie_voice End of CCIE_Voice Digest, Vol 51, Issue 5 * ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] IPExpert Workbook vol2
Dear Tom, Actually I bought both INE and IPE. I want to say that IPE matriel is much better with more and more indepth tasks and solution and more explanations. The point that the proctor guide in some labs - especially volume II - not 100 % accurate , so you will have to try a little . Also I recommend you IPE Walkthrough videos, which is a must [ I heared some of volume one videos and it is really excellent]. For INE the best is thier VoD by Josh Fink which is really very good. In brief, The IPE Workbooks 1,2 are the best along with walkthrough video's. Note: I already tried lab last month with no luck and found IPE material is very good along with the Outstanding bootcamp with Vik. Thanks and Best Regards, Wael Agina ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] ephone-dn singlevs dual line features available
ephone-dn 1 note : not a dual line number 1000 ephone 1 mac adds .. button 1:1 In this case, what one can't do - - confrence - for sure - transfer - ?? - ??? -??? I was able to transfer, not sure about Park and other things which can;t be done pls ? ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] IPExpert Workbook vol2
Totally agreed with Wael here, Let's not be mean INE products are good to learn the technologies, whereas IPX products are good for both learning the technologies and tackle the exam:) ... . Josh Finke and Vik videos are awesome. I have both and I'm satisfied.. planning to take the exam end of 2010. Best regards, Ahmad Azeem Date: Sun, 2 May 2010 19:47:49 +0300 From: waelag...@gmail.com To: tom.c...@gmail.com CC: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] IPExpert Workbook vol2 Dear Tom, Actually I bought both INE and IPE. I want to say that IPE matriel is much better with more and more indepth tasks and solution and more explanations. The point that the proctor guide in some labs - especially volume II - not 100 % accurate , so you will have to try a little . Also I recommend you IPE Walkthrough videos, which is a must [ I heared some of volume one videos and it is really excellent]. For INE the best is thier VoD by Josh Fink which is really very good. In brief, The IPE Workbooks 1,2 are the best along with walkthrough video's. Note: I already tried lab last month with no luck and found IPE material is very good along with the Outstanding bootcamp with Vik. Thanks and Best Regards, Wael Agina _ http://clk.atdmt.com/UKM/go/195013117/direct/01/ ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Quick question regarding dial peer zero
nope. greg From: ccie_voice-boun...@onlinestudylist.com [ccie_voice-boun...@onlinestudylist.com] On Behalf Of Matthew Berry [ciscovoiceg...@gmail.com] Sent: Sunday, May 02, 2010 7:25 AM To: CCIE Voice OSL Subject: [OSL | CCIE_Voice] Quick question regarding dial peer zero Can you completely shutdown dial peer zero just like you can shutdown manually created voice dial peers? Such a command might be helpful during a lab to ensure you don't overlook that pesky feature. Matthew Berry **Sent from my iPhone** Skype/Twitter: ciscovoiceguru Google Voice: +1 612 424 5044 ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] about IP blue VTGO multilab
Hi Guys, I saw in the new multilab soft-phone trial you can see that there are option to simulate 7965. Any of you have used that ? Can we really depend on that with out going for hardware phones Best Regards -- Ravindra Lakpriya +94 773 532 094 ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] IPExpert Workbook vol2
AA Gang - Thanks for the positive feedback. I'm interested in hearing more about what people think about our new Voice VOD course done by Vik. The old one (terrible quality) that was done by Mark Snow (before he was replaced) has been replaced by one redone by Vik (began shipping about a month ago). (People can get their update - if they haven't already received it - by emailing sa...@ipexpert.com.) Regards, Wayne A. Lawson II - CCIE #5244 (RS) Founder, President CEO - IPexpert, Inc., Proctor Labs, Inc. Platinum Solutions Group, LLC. Mailto: wlaw...@ipexpert.com Telephone: +1.810.334.1564 eFax: +1.810.454.0130 ::Message sent from iPhone:: IPexpert Proctor Labs are premier providers of Self-Study Workbooks, Video on Demand, Audio Tools, Online Hardware Rental and Classroom Training for the Cisco CCIE (RS, Voice, Security Service Provider) certification(s) with training locations throughout the United States, Europe, South Asia and Australia. Be sure to visit our online communities at www.ipexpert.com/communities and our public website at www.ipexpert.com or www.proctorlabs.com. Platinum Solutions Group (PSG) provides high-end consulting services with a primary emphasis on Cisco's Data Center Solutions, Service Provider Solutions, Unified Communications and Security-enabled infrastructures. Be sure to visit www.platinumsolutionsgroup.com. On May 2, 2010, at 1:27 PM, A A f...@hotmail.com wrote: Totally agreed with Wael here, Let's not be mean INE products are good to learn the technologies, whereas IPX products are good for both learning the technologies and tackle the exam:) ... . Josh Finke and Vik videos are awesome. I have both and I'm satisfied.. planning to take the exam end of 2010. Best regards, Ahmad Azeem Date: Sun, 2 May 2010 19:47:49 +0300 From: waelag...@gmail.com To: tom.c...@gmail.com CC: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] IPExpert Workbook vol2 Dear Tom, Actually I bought both INE and IPE. I want to say that IPE matriel is much better with more and more indepth tasks and solution and more explanations. The point that the proctor guide in some labs - especially volume II - not 100 % accurate , so you will have to try a little . Also I recommend you IPE Walkthrough videos, which is a must [ I heared some of volume one videos and it is really excellent]. For INE the best is thier VoD by Josh Fink which is really very good. In brief, The IPE Workbooks 1,2 are the best along with walkthrough video's. Note: I already tried lab last month with no luck and found IPE material is very good along with the Outstanding bootcamp with Vik. Thanks and Best Regards, Wael Agina Get a free e-mail account with Hotmail. Sign-up now. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] IPExpert Workbook vol2
Thanks Wael. Fingers crossed for your next attempt. We are finally reaching a point where we have completed all the labs, VOD and Vol 1 walkthru¹s etc, etc. Our next task, once the vol 2 walkthru¹s are complete, will be to revisit all the WB labs/solutions and correct typos and add more detailed explanations where necessary. It has been a difficult job to record/write new material and at the same time support the existing labs- hopefully we can improve the job we are doing on the product maintenance from now on. I, as always, would appreciate any feedback (privately if bad, publicly if good- LOL:-) you have on the VOD, WB and Walkthrus. -- Vik Malhi CCIE #13890 Instructor - IPexpert, Inc. Mailto: vma...@ipexpert.com Telephone: +1.810.326.1444 Fax: +1.810.454.0130 Live Assistance, Please visit: www.ipexpert.com/chat http://www.ipexpert.com/chat IPexpert is a premier provider of Self-Study Workbooks, Video on Demand, Audio Tools, Online Hardware Rental and Classroom Training for the Cisco CCIE (RS, Voice, Security Service Provider) certification(s) with training locations throughout the United States, Europe, South Asia and Australia. Be sure to visit our online communities at www.ipexpert.com/communities http://www.ipexpert.com/communities and our public website at www.ipexpert.com http://www.ipexpert.com/ From: Wael Agina waelag...@gmail.com Date: Sun, 2 May 2010 19:47:49 +0300 To: Tom tom.c...@gmail.com Cc: OSL Group ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] IPExpert Workbook vol2 Dear Tom, Actually I bought both INE and IPE. I want to say that IPE matriel is much better with more and more indepth tasks and solution and more explanations. The point that the proctor guide in some labs - especially volume II - not 100 % accurate , so you will have to try a little . Also I recommend you IPE Walkthrough videos, which is a must [ I heared some of volume one videos and it is really excellent]. For INE the best is thier VoD by Josh Fink which is really very good. In brief, The IPE Workbooks 1,2 are the best along with walkthrough video's. Note: I already tried lab last month with no luck and found IPE material is very good along with the Outstanding bootcamp with Vik. Thanks and Best Regards, Wael Agina ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] IPExpert Workbook vol2
Dear friends, I put faith in all of your good feeling for the IPX workbooks.. And I bought it now as per your advise.:).. Many Thanks specially to wael. I just down loaded Vol2 Lab 4 workbook from ipx site and I think need to improve before going to real exam ..(will give a comaprison with INE later ) I cant afford to attend IPX bootcamp as I am very far awy from them .(DUBAI). one again many thanks Regards Tom On Mon, May 3, 2010 at 12:55 AM, Vik Malhi vma...@ipexpert.com wrote: Thanks Wael. Fingers crossed for your next attempt. We are finally reaching a point where we have completed all the labs, VOD and Vol 1 walkthru’s etc, etc. Our next task, once the vol 2 walkthru’s are complete, will be to revisit all the WB labs/solutions and correct typos and add more detailed explanations where necessary. It has been a difficult job to record/write new material and at the same time support the existing labs- hopefully we can improve the job we are doing on the product maintenance from now on. I, as always, would appreciate any feedback (privately if bad, publicly if good- LOL:-) you have on the VOD, WB and Walkthrus. -- Vik Malhi – CCIE #13890 Instructor - IPexpert, Inc. Mailto: *vma...@ipexpert.com *Telephone: +1.810.326.1444 Fax: +1.810.454.0130 Live Assistance, Please visit: www.ipexpert.com/chat * http://www.ipexpert.com/chat* IPexpert is a premier provider of Self-Study Workbooks, Video on Demand, Audio Tools, Online Hardware Rental and Classroom Training for the Cisco CCIE (RS, Voice, Security Service Provider) certification(s) with training locations throughout the United States, Europe, South Asia and Australia. Be sure to visit our online communities at www.ipexpert.com/communities *http://www.ipexpert.com/communities* and our public website at www.ipexpert.com *http://www.ipexpert.com/* -- *From: *Wael Agina waelag...@gmail.com *Date: *Sun, 2 May 2010 19:47:49 +0300 *To: *Tom tom.c...@gmail.com *Cc: *OSL Group ccie_voice@onlinestudylist.com *Subject: *Re: [OSL | CCIE_Voice] IPExpert Workbook vol2 Dear Tom, Actually I bought both INE and IPE. I want to say that IPE matriel is much better with more and more indepth tasks and solution and more explanations. The point that the proctor guide in some labs - especially volume II - not 100 % accurate , so you will have to try a little . Also I recommend you IPE Walkthrough videos, which is a must [ I heared some of volume one videos and it is really excellent]. For INE the best is thier VoD by Josh Fink which is really very good. In brief, The IPE Workbooks 1,2 are the best along with walkthrough video's. Note: I already tried lab last month with no luck and found IPE material is very good along with the Outstanding bootcamp with Vik. Thanks and Best Regards, Wael Agina -- ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] about IP blue VTGO multilab
I found the multilab software really buggy (it crashed every time I registered a phone), so I use the current version of VTGO-Advanced with the /d switch (for multiple devices) - it works great (although only simulates 7961's and has some shortcomings). On Mon, May 3, 2010 at 4:48 AM, Ravindra Lakpriya lakpr...@gmail.comwrote: Hi Guys, I saw in the new multilab soft-phone trial you can see that there are option to simulate 7965. Any of you have used that ? Can we really depend on that with out going for hardware phones Best Regards -- Ravindra Lakpriya +94 773 532 094 ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] Lab 2 / q 6.3 - Qos on 3750 Switch
sh mls qos int fa1/0/8 queFastEthernet1/0/8 Egress Priority Queue : enabled Shaped queue weights (absolute) : 10 50 20 20 Shared queue weights : 10 10 60 20 The port bandwidth limit : 100 (Operational Bandwidth:100.0) The port is mapped to qset : 1 How do I change it to queue-set 2 ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] volume 2 lab1 task 4.2
Yes! I have finally joined the realm of fellow Vol 2 Cisco nerds. On Question 4.2, make sure to uncheck Wait for far end H.245 terminal capability set on the H.225 gatekeeper-control trunk configured in CUCM. Otherwise, your call from HQ to BR2 will ring, but not be established. The reason for it is found in the CUCM SRND, page 8-46 The Wait For Far End H.245 Terminal Capability Set (TCS) option must be unchecked to prevent stalemate situations from occurring when the H.323 devices at both sides of the trunk are waiting the far end to send TCS first and the H.245 connection times out after a few seconds. And again on 16-11 By default, the Wait for Far-End to Send TCS option is enabled (checked). However, you must uncheck (disable) it in the following circumstances: *When the H.323 device communicating with Unified CM is also waiting for the far-end to send its TCS* In this case, a stalemate occurs because neither side sends its TCS, and the H.245 connection times out after a few seconds. Examples of devices that also wait for the far-end to send TCS are some H.323 routed-mode gatekeepers, H.320 gateways, H.323 proxies (or IP-to-IP gateways) and some H.323 multipoint conference bridges. These devices wait for the far-end to send TCS for the same reason Unified CM does: because they are waiting for both sides of the connection to send their TCSs before forwarding them to the other side. *When communicating with another Unified CM cluster over an intercluster trunk* In many scenarios, Unified CM performs the role of a software switch connecting two endpoint devices (such as two H.323 clients that are trying to call each other). In such cases, it is best if Unified CM waits until both devices have sent their TCS messages so that it knows the capabilities of each device and can therefore make the most intelligent decision about what TCS to send back to each party (depending on region and location configs, among other things). In these cases, the Wait for Far-End to Send TCS feature should be enabled. However, some other H.323 devices (such as an H.320 gateway, which connects an H.323 device to an H.320 device) also perform the function of connecting two or more parties together. The gateway also prefers to wait until both ends send their TCS messages, so that it can make the most intelligent choice about how to set up the call. A stalemate could result if Unified CM and the gateway both wait for the other side to send their TCSs. To avoid this stalemate situation, disable (uncheck) the Wait for Far-End to Send TCS feature. *Matthew Berry* /A+, CCENT, CCNA, CCNA Voice, CCVP, CCIE Voice Written/ *_Vitals:_* *GVoice: *+1.612.424.5044 *Gmail*: ciscovoiceg...@gmail.com *Skype*: ciscovoiceguru *Twitter*: ciscovoiceguru *_Cert Stats:_* Cisco Cert Journey Began: Jan 1, 2009 1st Lab Attempt: Aug 16, 2010 ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Lab 2 / q 6.3 - Qos on 3750 Switch
HQ-3750(config)#int f1/0/2 HQ-3750(config-if)#queu HQ-3750(config-if)#queue-set ? 1-2 the qset to which this port is mapped -- Vik Malhi CCIE #13890 Instructor - IPexpert, Inc. Mailto: vma...@ipexpert.com Telephone: +1.810.326.1444 Fax: +1.810.454.0130 Live Assistance, Please visit: www.ipexpert.com/chat http://www.ipexpert.com/chat IPexpert is a premier provider of Self-Study Workbooks, Video on Demand, Audio Tools, Online Hardware Rental and Classroom Training for the Cisco CCIE (RS, Voice, Security Service Provider) certification(s) with training locations throughout the United States, Europe, South Asia and Australia. Be sure to visit our online communities at www.ipexpert.com/communities http://www.ipexpert.com/communities and our public website at www.ipexpert.com http://www.ipexpert.com/ From: vccie2010 vccie2...@gmail.com Date: Sun, 2 May 2010 16:56:38 -0700 To: OSL Group ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] Lab 2 / q 6.3 - Qos on 3750 Switch sh mls qos int fa1/0/8 queFastEthernet1/0/8 Egress Priority Queue : enabled Shaped queue weights (absolute) : 10 50 20 20 Shared queue weights : 10 10 60 20 The port bandwidth limit : 100 (Operational Bandwidth:100.0) The port is mapped to qset : 1 How do I change it to queue-set 2 ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] ephone-dn singlevs dual line features available
Consult transfer Call waiting -- Vik Malhi CCIE #13890 Instructor - IPexpert, Inc. Mailto: vma...@ipexpert.com Telephone: +1.810.326.1444 Fax: +1.810.454.0130 Live Assistance, Please visit: www.ipexpert.com/chat http://www.ipexpert.com/chat IPexpert is a premier provider of Self-Study Workbooks, Video on Demand, Audio Tools, Online Hardware Rental and Classroom Training for the Cisco CCIE (RS, Voice, Security Service Provider) certification(s) with training locations throughout the United States, Europe, South Asia and Australia. Be sure to visit our online communities at www.ipexpert.com/communities http://www.ipexpert.com/communities and our public website at www.ipexpert.com http://www.ipexpert.com/ From: vccie2010 vccie2...@gmail.com Date: Sun, 2 May 2010 10:13:38 -0700 To: OSL Group ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] ephone-dn singlevs dual line features available ephone-dn 1 note : not a dual line number 1000 ephone 1 mac adds .. button 1:1 In this case, what one can't do - - confrence - for sure - transfer - ?? - ??? -??? I was able to transfer, not sure about Park and other things which can;t be done pls ? ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] ephone-dn singlevs dual line features available
thx Vik, I believe one will not be able to confernce too from this phone, right ? On Sun, May 2, 2010 at 7:52 PM, Vik Malhi vma...@ipexpert.com wrote: Consult transfer Call waiting -- Vik Malhi – CCIE #13890 Instructor - IPexpert, Inc. Mailto: *vma...@ipexpert.com *Telephone: +1.810.326.1444 Fax: +1.810.454.0130 Live Assistance, Please visit: www.ipexpert.com/chat * http://www.ipexpert.com/chat* IPexpert is a premier provider of Self-Study Workbooks, Video on Demand, Audio Tools, Online Hardware Rental and Classroom Training for the Cisco CCIE (RS, Voice, Security Service Provider) certification(s) with training locations throughout the United States, Europe, South Asia and Australia. Be sure to visit our online communities at www.ipexpert.com/communities *http://www.ipexpert.com/communities* and our public website at www.ipexpert.com *http://www.ipexpert.com/* -- *From: *vccie2010 vccie2...@gmail.com *Date: *Sun, 2 May 2010 10:13:38 -0700 *To: *OSL Group ccie_voice@onlinestudylist.com *Subject: *[OSL | CCIE_Voice] ephone-dn singlevs dual line features available ephone-dn 1 note : not a dual line number 1000 ephone 1 mac adds .. button 1:1 In this case, what one can't do - - confrence - for sure - transfer - ?? - ??? -??? I was able to transfer, not sure about Park and other things which can;t be done pls ? -- ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Transcoder and BACD issue
Yes- for calls to the BACD #,unless you use g711 end to end you need a prefix of some kind otherwise the BACD dial-peer will be used the call will fail. (1) Call coming into CME should hit an inbound dial-peer using g729. (2) Prefix should be stripped either using voice translation profile or num-exp (3) Outbound dial-peer should be matched (dial-peer voice 222 voip) (4) transcoder is engaged. The transcoder can only ever be engaged when the codec mismatch is between the inbound and outbound dial-peer (or in a UCM environment when both the endpoints are registered to UCM and a codec mismatch occurs). -- Vik Malhi CCIE #13890 Instructor - IPexpert, Inc. Mailto: vma...@ipexpert.com Telephone: +1.810.326.1444 Fax: +1.810.454.0130 Live Assistance, Please visit: www.ipexpert.com/chat http://www.ipexpert.com/chat IPexpert is a premier provider of Self-Study Workbooks, Video on Demand, Audio Tools, Online Hardware Rental and Classroom Training for the Cisco CCIE (RS, Voice, Security Service Provider) certification(s) with training locations throughout the United States, Europe, South Asia and Australia. Be sure to visit our online communities at www.ipexpert.com/communities http://www.ipexpert.com/communities and our public website at www.ipexpert.com http://www.ipexpert.com/ From: Jeff Cotter jcot...@voxns.com Date: Fri, 30 Apr 2010 12:56:34 -0700 To: vccie2010 vccie2...@gmail.com Cc: OSL Group ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] Transcoder and BACD issue Already done and calls to and from sip work fine. The problem as I see it, is the dial-peer 222 acts as both incoming and outgoing dial-peer and IS hardcoded for g711u. Therefore a transcoder will never be invoked#!! As both inbound and outbound dial-peer is g711u so no codec mismatch no transcoder. The only solution I found is to call a different number say 3800 from UCM call routes to CME hits dial-peer 3800 dial-peer with g729 codec configured!! I than set up ephone-dn 3800 and call-forward all to BACD pilot number of 3500. This works. Again I see no possible way of transcoding this BACD dial-peer configured as documentation states because it acts as both legs of the call and hardcoded to g711u so no way is a transcoder going to be invoked. From: vccie2010 [mailto:vccie2...@gmail.com] Sent: Friday, April 30, 2010 12:50 PM To: Jeff Cotter Cc: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] Transcoder and BACD issue ON your GK trunk - Uncheck H245 box On Fri, Apr 30, 2010 at 12:20 PM, Jeff Cotter jcot...@voxns.com wrote: Station to Station calls work as expected between UCM and CME including g729 call through gatekeeper to CME sip phone using g711. Transcoder is invoked properly and confirmed with show sccp connections. Call Routing and Transcoder proven as functional with above. However call fails immediately if I put my GK Trunk on UCM to g729 region (due to codec mismatch). If I change CME BACD dial-peer to g729 you hear silence. Voice-class codec on BACD dial-p you hear silence. Change UCM Trunk to g711u region and BACD dial peer to g711u call works fine. How is one supposed to get calls over the WAN using g729 to work with BACD?? Dial-peer config below. All other config is proven to be working dial-peer voice 222 voip service aa destination-pattern 3500 session target ipv4:3.3.3.3 (loopback interface) incoming called-number 3500 dtmf-relay h245-alphanumeric codec g711ulaw no vad ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com http://www.ipexpert.com/ ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Lab 2 8.3 VPIM
Vik, On CUE when I define email domain IP addr of Unity ( Message from Unity to CUE works fine but can not send the message other way round from Unity to CUE) but if on CUE I use email domain cuc7-pub this is what I have as VPIM location on Unity and matches the SMTP domain on Unity, in this case it works from Unity to CUE and not from CUE to Unity) Can you please help me on this I am on IPX rack right now thx V On Fri, Apr 30, 2010 at 12:54 PM, vccie2010 vccie2...@gmail.com wrote: Vik, If we define cuc7-pub as domain name will it work , since CUE does not have DNS server configured ? Per the IPX solution I am using Unity IP address for the domain for unity location on cue. On Thu, Apr 29, 2010 at 9:48 PM, Vik Malhi vma...@ipexpert.com wrote: So the domain name defined in the unity location within cue should be cuc7-pub. Is that the case? It must match the domain name of the sender. Vik Malhi - CCIE#13890 Senior Technical Instructor - IPexpert Inc Telephone: +1.810.326.1444 Fax: +1.810.454.0130 Mailto: vma...@ipexpert.com Join IPexpert's Free CCIE Peer Groups Study Communities at www.IPexpert.com/communities http://www.ipexpert.com/communitieshttp://www.ipexpert.com/communities On Apr 29, 2010, at 8:25 PM, vccie2010 vccie2...@gmail.com wrote: Sergio, This is what I get when trying to send VM from HQ to BR2 (Unity to CUE). when using PDL ... cue# sh trace buffer tail Press CTRL-C to exit... 8074 04/30 11:19:46.314 netw smtp 5 221 closing channel 5863 04/30 11:21:08.336 netw smtp 2 5863 04/30 11:21:08.364 netw smtp 3 socket hostName: 10.10.210.13, hostAddress: 10.10.210.13 5863 04/30 11:21:08.364 netw smtp 3 hostname: 10.10.210.13 found in good address cache 5863 04/30 11:21:08.366 netw smtp 1 8078 04/30 11:21:08.367 netw smtp 5 Initial connection message 8078 04/30 11:21:08.374 netw smtp 6 UNKNOWN: EHLO CUC7-Pub 8078 04/30 11:21:08.375 netw smtp 5 250-cue 8078 04/30 11:21:08.382 netw smtp 6 EHLO : MAIL FROM:5...@cuc7-pub 8078 04/30 11:21:08.400 netw smtp 5 554 5.1.8 Bad senders system address 8078 04/30 11:21:08.407 netw smtp 6 MAIL FROM:: QUIT 8078 04/30 11:21:08.407 netw smtp 5 221 closing channel == When dialing loc id plus ext 5863 04/30 11:24:22.303 netw smtp 1 8089 04/30 11:24:22.304 netw smtp 5 Initial connection message 8089 04/30 11:24:22.314 netw smtp 6 UNKNOWN: EHLO CUC7-Pub 8089 04/30 11:24:22.314 netw smtp 5 250-cue 8089 04/30 11:24:22.323 netw smtp 6 EHLO : MAIL FROM:5...@cuc7-pub 8089 04/30 11:24:22.342 netw smtp 5 554 5.1.8 Bad senders system address 8089 04/30 11:24:22.350 netw smtp 6 MAIL FROM:: QUIT 8089 04/30 11:24:22.351 netw smtp 5 221 closing channel Apprciate your help on this... On Sun, Apr 25, 2010 at 7:04 AM, Sergio Polizer spoli...@hotmail.comwrote: No, you can send vm addressing by name but You need to add remote user. CUE- remote username hqph1 location xxx / remote username hqph1 phonenumber 5001 UC- add remote user as Contacts. Tell us your configuration. Did you to try troubleshooting with: trace networking vpim all trace networking smtp all show trace buffer tail HTH, Sergio. -- Date: Sat, 24 Apr 2010 19:04:14 -0700 From: vccie2...@gmail.com To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] Lab 2 8.3 VPIM I am able to leave VM for Unity from BR2(CUE) but I have to dial Location ID plus the extension for HQ(Unity) , is it normal ? Also, can not leave msg from HQ to BR2, I am on IPX rack. any feedback will be helpful... -- Quer transformar suas fotos em emoticons para o Messenger? Clique aqui e veja como.http://ilm.windowslive.com.br/?ocid=ILM:ILM:Hotmail:Tagline:1x1:Tagline ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Is it must to give codec G711ulaw under voice register pool 1
Angel, So that should hold trur for SCCP phones too ? that is we should explictly mentione codec g711ulaw On Sat, May 1, 2010 at 5:29 PM, vccie2010 vccie2...@gmail.com wrote: Angel I give you 11 out of 10, I would not have thought about it in my dreams evev, thanks a million bud [?] On Sat, May 1, 2010 at 2:37 AM, Angel Perez gorr...@hotmail.com wrote: Hi, if you are asked to use g711 for intra-site calls and you don't specify codedc g771u under voice register pool, intrasite calls to/from this phone to let say to other sccp phone in the same site will use g729 and you will brake the requirements hth -- Date: Fri, 30 Apr 2010 19:25:10 -0700 From: vccie2...@gmail.com To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] Is it must to give codec G711ulaw under voice register pool 1 Is it must to give codec G711ulaw under voice register pool 1 I believe it Q dependent and also If I have G711ulaw under voice reg pool in that case if I am calling say via GK from HQ into CME the transcoders will be needed, but is there anythign else I am missing whcih will break if I don't mention any codec under voice reg pool...which by default is G729 thx -V -- Hotmail: Free, trusted and rich email service. Get it now.https://signup.live.com/signup.aspx?id=60969 360.gif___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Voice Vol II labs 6 7 - IPCC Express scripts
They're on the desktop of the UCCX server in a folder called 'Student. On Sun, Feb 21, 2010 at 7:19 PM, Dave Wong dwch...@gmail.com wrote: Hi I'm having problems with the UCCX section for labs 6 and 7. I can't find the answer scripts ( .aef files) that are used for these sections of the lab in my member's area. I'm wondering if these are actually available for download, or has anyone successfully completed these sections and are willing to post your scripts? ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Voice Vol II labs 6 7 - IPCC Express scripts
Hi all, The scripts aren't always on the servers - I had the same problem last week both booked Proctor lab times, neither had the contact centre scripts local, I found them under the members area on IPExpert. Cheers, On Mon, May 3, 2010 at 1:22 PM, Roger Henderson rhender...@gmail.comwrote: They're on the desktop of the UCCX server in a folder called 'Student. On Sun, Feb 21, 2010 at 7:19 PM, Dave Wong dwch...@gmail.com wrote: Hi I'm having problems with the UCCX section for labs 6 and 7. I can't find the answer scripts ( .aef files) that are used for these sections of the lab in my member's area. I'm wondering if these are actually available for download, or has anyone successfully completed these sections and are willing to post your scripts? ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com -- Cheers, kiwi ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] IPExpert Workbook vol2
I fell that will be a great idea for potential candidates here. Unfortunately, I attended * Khan's bootcamp last year.Very bad one .I think his bootcamp is only for him to make some money. I think he has conducted 3 or 4 bootcamps here and average student strength is 8-10. Regards Tom Also, On Mon, May 3, 2010 at 6:49 AM, Vik Malhi vma...@ipexpert.com wrote: Hey Tom- whats the interest there in Dubai in CCIE Voice? We are looking to put a couple of international dates in the diary and I thought Dubai would be a good place. Do you think there is much demand? -- Vik Malhi – CCIE #13890 Instructor - IPexpert, Inc. Mailto: *vma...@ipexpert.com *Telephone: +1.810.326.1444 Fax: +1.810.454.0130 Live Assistance, Please visit: www.ipexpert.com/chat * http://www.ipexpert.com/chat* IPexpert is a premier provider of Self-Study Workbooks, Video on Demand, Audio Tools, Online Hardware Rental and Classroom Training for the Cisco CCIE (RS, Voice, Security Service Provider) certification(s) with training locations throughout the United States, Europe, South Asia and Australia. Be sure to visit our online communities at www.ipexpert.com/communities *http://www.ipexpert.com/communities* and our public website at www.ipexpert.com *http://www.ipexpert.com/* -- *From: *Tom tom.c...@gmail.com *Date: *Mon, 3 May 2010 01:39:39 +0400 *To: *OSL Group ccie_voice@onlinestudylist.com *Subject: *Re: [OSL | CCIE_Voice] IPExpert Workbook vol2 Dear friends, I put faith in all of your good feeling for the IPX workbooks.. And I bought it now as per your advise.:).. Many Thanks specially to wael. I just down loaded Vol2 Lab 4 workbook from ipx site and I think need to improve before going to real exam ..(will give a comaprison with INE later ) I cant afford to attend IPX bootcamp as I am very far awy from them .(DUBAI). one again many thanks Regards Tom On Mon, May 3, 2010 at 12:55 AM, Vik Malhi vma...@ipexpert.com wrote: Thanks Wael. Fingers crossed for your next attempt. We are finally reaching a point where we have completed all the labs, VOD and Vol 1 walkthru’s etc, etc. Our next task, once the vol 2 walkthru’s are complete, will be to revisit all the WB labs/solutions and correct typos and add more detailed explanations where necessary. It has been a difficult job to record/write new material and at the same time support the existing labs- hopefully we can improve the job we are doing on the product maintenance from now on. I, as always, would appreciate any feedback (privately if bad, publicly if good- LOL:-) you have on the VOD, WB and Walkthrus. -- Vik Malhi – CCIE #13890 Instructor - IPexpert, Inc. Mailto: *vma...@ipexpert.com http://vma...@ipexpert.com * Telephone: +1.810.326.1444 Fax: +1.810.454.0130 Live Assistance, Please visit: www.ipexpert.com/chat http://www.ipexpert.com/chat *http://www.ipexpert.com/chat* IPexpert is a premier provider of Self-Study Workbooks, Video on Demand, Audio Tools, Online Hardware Rental and Classroom Training for the Cisco CCIE (RS, Voice, Security Service Provider) certification(s) with training locations throughout the United States, Europe, South Asia and Australia. Be sure to visit our online communities at www.ipexpert.com/communities http://www.ipexpert.com/communities * http://www.ipexpert.com/communities* and our public website at www.ipexpert.com http://www.ipexpert.com/ *http://www.ipexpert.com/ http://www.ipexpert.com/ * -- *From: *Wael Agina waelag...@gmail.com http://waelag...@gmail.com *Date: *Sun, 2 May 2010 19:47:49 +0300 *To: *Tom tom.c...@gmail.com http://tom.c...@gmail.com *Cc: *OSL Group ccie_voice@onlinestudylist.com http://ccie_voice@onlinestudylist.com *Subject: *Re: [OSL | CCIE_Voice] IPExpert Workbook vol2 Dear Tom, Actually I bought both INE and IPE. I want to say that IPE matriel is much better with more and more indepth tasks and solution and more explanations. The point that the proctor guide in some labs - especially volume II - not 100 % accurate , so you will have to try a little . Also I recommend you IPE Walkthrough videos, which is a must [ I heared some of volume one videos and it is really excellent]. For INE the best is thier VoD by Josh Fink which is really very good. In brief, The IPE Workbooks 1,2 are the best along with walkthrough video's. Note: I already tried lab last month with no luck and found IPE material is very good along with the Outstanding bootcamp with Vik. Thanks and Best Regards, Wael Agina -- ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com http://www.ipexpert.com/ -- ___ For more information regarding industry leading CCIE
[OSL | CCIE_Voice] GateKeeper Related question
Hi, Have a query related a unregistration request. Steps: 1.Register CUCM to valid8 GK 2.Establish a call between CUCM and Valid8 3.Send release complete from Valid8 to CUCM 4.CUCM retransmits DRQ twice as DCF is not send by valid8 5.From CUCM I delete Trunk(valid8) I donot see Unregistration request reaching valid8. But I do see the below message. Query is why URQ is not sent from CUCM? Please find the logs attached. “000727802 |2010/05/21 15:00:37.585 |100 |AppInfo |||GKIFHandler(1,100,177,2)|||GKIFHandler::RasUnregReq received RasUnregReq for 10.78.86.34_42422 from RasPid(1,100,86,70) 000727803 |2010/05/21 15:00:37.585 |100 |SdlSig |UnregisterH225HandlerReq |wait |H225Handler(1,100,173,1) |H225D(1,100,174,70) | “ Thanks and Regards Nataraj ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com