[OSL | CCIE_Voice] Vol 2 lab 2 q 11.1

[Ahmed Ellboudy]

Dear All ,
 
As I am working now in the integration between CUCM and UCCX , the integration 
done and the two phones are in Ready state my problem is when I tried to call 
icd RP # (5710) from any phone it is rings two ring and disconnect the call 
when it try to go to the CTI ports (5701 or 5702 ).
 
so can any one help me to check this issue.
 
Thanks & Regards;
 Ahmed 
Disclaimer: NOTICE The information contained in this message is confidential 
and is intended for the addressee(s) only. If you have received this message in 
error or there are any problems please notify the originator immediately. The 
unauthorized use, disclosure, copying or alteration of this message is strictly 
forbidden. Raya will not be liable for direct, special, indirect or 
consequential damages arising from alteration of the contents of this message 
by a third party or as a result of any malicious code or virus being passed on. 
Views expressed in this communication are not necessarily those of Raya.If you 
have received this message in error, please notify the sender immediately by 
email, facsimile or telephone and return and/or destroy the original message. 
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] RSVP within 2 different location is fine butvia GK is a problem

[Ki Wi]

Hi Sandeep,
Thanks for reply. 

Do you happen to know about any mechanism which can perform end to end resource 
reservation? 

Such as across gatekeeper, between cme to cucm, etc. 

Sent from my iPhone
Pls pardon my fat fingers.

On May 13, 2011, at 11:32 AM,  wrote:

> Hi Kiwi,
> 
> RSVP is within a single CUCM cluster concept. RSVP between two endpoints is 
> intelligently performed by CUCM and therefore both the endpoints should have 
> control of the two endpoints involving in RSVP. Your query talks about CUCM 
> to CME which contradicts the theory of RSVP.
> 
> Thanks,
> Sandeep
> 
> -Original Message-
> From: ccie_voice-boun...@onlinestudylist.com on behalf of Ki Wi
> Sent: Fri 5/13/2011 2:08 AM
> To: OSL Questions
> Subject: Re: [OSL | CCIE_Voice] RSVP within 2 different location is fine 
> butvia GK is a problem
> 
> After future troubleshooting, it seems like RSVP went the wrong way, it went
> to BR1 router instead of BR2 router.
> 
> 
> I wonder, how should i configure it to make RSVP working. Am i suppose to
> get BR2's MTP to be registered to CUCM as well?
> 
> On Fri, May 13, 2011 at 3:39 AM, Ki Wi  wrote:
> 
> > Hi Guys,
> > I'm new to RSVP.
> >
> > I got RSVP working between 2 different location ( HQ and BR1) .
> > In individual MRL, i registered a software MTP rsvp agent
> >
> > I have registered RSVP agent for BR2 (CME) , in dial-peer i have set
> > req-qos guarantee-load and acc-qos guarantee-load, what else I'm missing?
> > For GK trunk configuration in CUCM, i allocated default CUCM software MTP
> > to it, is it correct? I don't think by registering MTP from BR2 to it is the
> > way to go and it's not very logically.
> >
> > In order to have RSVP for H.323 via GK, what else do I have to do ? If
> > there's a guide for H323/GK related, please point me to it.
> >
> > Cheers,
> > Ki Wi
> >
> 
> 
> Please do not print this email unless it is absolutely necessary.
> 
> The information contained in this electronic message and any attachments to 
> this message are intended for the exclusive use of the addressee(s) and may 
> contain proprietary, confidential or privileged information. If you are not 
> the intended recipient, you should not disseminate, distribute or copy this 
> e-mail. Please notify the sender immediately and destroy all copies of this 
> message and any attachments.
> 
> WARNING: Computer viruses can be transmitted via email. The recipient should 
> check this email and any attachments for the presence of viruses. The company 
> accepts no liability for any damage caused by any virus transmitted by this 
> email.
> 
> www.wipro.com
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] RSVP within 2 different location is fine butvia GK is a problem

[sandeep.raman]

Hi Kiwi,

RSVP is within a single CUCM cluster concept. RSVP between two endpoints is 
intelligently performed by CUCM and therefore both the endpoints should have 
control of the two endpoints involving in RSVP. Your query talks about CUCM to 
CME which contradicts the theory of RSVP.

Thanks,
Sandeep

-Original Message-
From: ccie_voice-boun...@onlinestudylist.com on behalf of Ki Wi
Sent: Fri 5/13/2011 2:08 AM
To: OSL Questions
Subject: Re: [OSL | CCIE_Voice] RSVP within 2 different location is fine butvia 
GK is a problem

After future troubleshooting, it seems like RSVP went the wrong way, it went
to BR1 router instead of BR2 router.


I wonder, how should i configure it to make RSVP working. Am i suppose to
get BR2's MTP to be registered to CUCM as well?

On Fri, May 13, 2011 at 3:39 AM, Ki Wi  wrote:

> Hi Guys,
> I'm new to RSVP.
>
> I got RSVP working between 2 different location ( HQ and BR1) .
> In individual MRL, i registered a software MTP rsvp agent
>
> I have registered RSVP agent for BR2 (CME) , in dial-peer i have set
> req-qos guarantee-load and acc-qos guarantee-load, what else I'm missing?
> For GK trunk configuration in CUCM, i allocated default CUCM software MTP
> to it, is it correct? I don't think by registering MTP from BR2 to it is the
> way to go and it's not very logically.
>
> In order to have RSVP for H.323 via GK, what else do I have to do ? If
> there's a guide for H323/GK related, please point me to it.
>
> Cheers,
> Ki Wi
>


Please do not print this email unless it is absolutely necessary. 

The information contained in this electronic message and any attachments to 
this message are intended for the exclusive use of the addressee(s) and may 
contain proprietary, confidential or privileged information. If you are not the 
intended recipient, you should not disseminate, distribute or copy this e-mail. 
Please notify the sender immediately and destroy all copies of this message and 
any attachments. 

WARNING: Computer viruses can be transmitted via email. The recipient should 
check this email and any attachments for the presence of viruses. The company 
accepts no liability for any damage caused by any virus transmitted by this 
email. 

www.wipro.com
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] System prompt Unity Connection or IPCCX

[sandeep.raman]

Hi Hannes,

If i've understood your question correctly, you are looking at configuring a 
message prompt saying "Sorry the number is currently unavailable please try 
again later"

The following steps are configured to ensure no call waiting is enabled on a 
specific line on Phone:

step1->Configured Busy trigger per button to 1
Step2-> Call forward busy to CTI_RP()
Step3-> CTI_RP CFWDALL to VoiceMail(Unity Connection)
Step4->On Unity Connection create a Call Handler with DN as 
Step5->on the standard greetings section of Call Handler, choose personal 
greeting and upload customized/recorded greeting
step6->Under the standard greetings configuration page,After Greeting either 
send the call to the operator Call handler for further assistance or perform 
call treatment which is deemed appropriate for you.


Regards,
Sandeep

-Original Message-
From: ccie_voice-boun...@onlinestudylist.com on behalf of Hannes Dippenaar
Sent: Fri 5/13/2011 3:27 AM
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] System prompt Unity Connection or IPCCX


Good Day,

Can you possibly help me with a system prompt that reads the following for 
Unity Connection or IPCCX.

" Sorry the number is currently unavailable please try again later"

Is there a default prompt that I can setup in Unity Connection or IPCCX.

Or must I record my own prompt?

regards,

Hannes





Please do not print this email unless it is absolutely necessary. 

The information contained in this electronic message and any attachments to 
this message are intended for the exclusive use of the addressee(s) and may 
contain proprietary, confidential or privileged information. If you are not the 
intended recipient, you should not disseminate, distribute or copy this e-mail. 
Please notify the sender immediately and destroy all copies of this message and 
any attachments. 

WARNING: Computer viruses can be transmitted via email. The recipient should 
check this email and any attachments for the presence of viruses. The company 
accepts no liability for any damage caused by any virus transmitted by this 
email. 

www.wipro.com
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] Multicast MOH

[Cristobal Priego]

you will have to confirm if your moh is registered to the pub or the sub
if it's registered to the sub
isssue an ssh and then the following command

show perf query class "Cisco MOH Device"

and it will display both MOH server and indeed all the active multicast
sessions

2011/5/12 Santiago Figueroa 

>  Hello all
>
>
>
> Can anyone tell me if exist any way to see the multicst moh in Pub with
> CLI?
>
>
>
>
>
> If I have the session ssh to Pub can I to see that session MOH multicast?
>
>
>
>
>
> Thanks
>
> --
> La información incluida en este mensaje y sus anexos es CONFIDENCIAL y para
> USO EXCLUSIVO de sus destinatarios. No está permitida su divulgación y/o
> reproducción sin autorización. Si ha recibido este mensaje y no le incumbe,
> le rogamos nos los comunique y proceda a su borrado. Gracias.
>
> Information included in this e-mail and attached files is CONFIDENTIAL and
> only for the EXCLUSIVE USE of the receivers. Circulation and/or copy without
> permission is not allowed. If you have received this e-mail and you are not
> the intended recipient, please let us know and erase the message and
> attached files. Thank you.
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Voice] GK out VIA question

[Cristobal Priego]

hello all

i have the following question hopefully you can let me know what my error is

GK between UCM and CME single Zone, there is also a remote zone, calls to
the remote zone should be invoked used an outvia zone, i have my cube
configured and everything however when i issue debug gatekeeper main 10, i
can see on the debugs that it says that it can't find the ipip gateway and
my call fails.

the ucm is on zone US and the tech prefix is 1
the ucme is on zone US as well with tech prefix 3
the

this is my config

int lo0
h323-gateway voip interface
h323-gateawy voip id VIA ipaddr 10.10.110.1
h323-gateway voip h323-id CUBE
gateway



gatekeeper
zone local US frida.com 10.10.110.1
zone local VIA
zone remote PSTN frida.com 10.10.100.2 outvia VIA
zone prefix PSTN 91*
no sh


dial-peer voice 2 voip
incoming called-number 91T

dial-peer voice 3 voip
destination-pattern 91T
session target ras

allow-connections h t h
allow-connections h t s
allow-connections s t h
allow-connections s t s

what am i missing ?

thanks
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] Multicast MOH

[Santiago Figueroa]

Hello all

Can anyone tell me if exist any way to see the multicst moh in Pub with CLI?


If I have the session ssh to Pub can I to see that session MOH multicast?


Thanks


La informaci?n incluida en este mensaje y sus anexos es CONFIDENCIAL y para USO 
EXCLUSIVO de sus destinatarios. No est? permitida su divulgaci?n y/o 
reproducci?n sin autorizaci?n. Si ha recibido este mensaje y no le incumbe, le 
rogamos nos los comunique y proceda a su borrado. Gracias.

Information included in this e-mail and attached files is CONFIDENTIAL and only 
for the EXCLUSIVE USE of the receivers. Circulation and/or copy without 
permission is not allowed. If you have received this e-mail and you are not the 
intended recipient, please let us know and erase the message and attached 
files. Thank you.
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Voice] System prompt Unity Connection or IPCCX

[Hannes Dippenaar]

Good Day,

Can you possibly help me with a system prompt that reads the following for 
Unity Connection or IPCCX.

" Sorry the number is currently unavailable please try again later"

Is there a default prompt that I can setup in Unity Connection or IPCCX. 

Or must I record my own prompt?

regards,

Hannes


  ___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] via zone

[Santiago Figueroa]

Thanks for your reply.


De: Gregg Malcolm [mailto:gregg.malc...@gmail.com]
Enviado el: Jueves, 12 de Mayo de 2011 04:13 p.m.
Para: Santiago Figueroa
CC: ccie_voice@onlinestudylist.com
Asunto: Re: [OSL | CCIE_Voice] via zone

Outvia is when using Gateway to Gatekeeper (ARQ). Invia is when using 
Gatekeeper to Gatekeeper (LRQ - remote zone)
On Thu, May 12, 2011 at 4:40 PM, Santiago Figueroa 
mailto:sfigue...@mnet.com.mx>> wrote:
Hello I have a doubt when is necessary to use VIA zone invia or outvia?


Thanks.




La información incluida en este mensaje y sus anexos es CONFIDENCIAL y para USO 
EXCLUSIVO de sus destinatarios. No está permitida su divulgación y/o 
reproducción sin autorización. Si ha recibido este mensaje y no le incumbe, le 
rogamos nos los comunique y proceda a su borrado. Gracias.

Information included in this e-mail and attached files is CONFIDENTIAL and only 
for the EXCLUSIVE USE of the receivers. Circulation and/or copy without 
permission is not allowed. If you have received this e-mail and you are not the 
intended recipient, please let us know and erase the message and attached 
files. Thank you.

___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com



La información incluida en este mensaje y sus anexos es CONFIDENCIAL y para USO 
EXCLUSIVO de sus destinatarios. No está permitida su divulgación y/o 
reproducción sin autorización. Si ha recibido este mensaje y no le incumbe, le 
rogamos nos los comunique y proceda a su borrado. Gracias.

Information included in this e-mail and attached files is CONFIDENTIAL and only 
for the EXCLUSIVE USE of the receivers. Circulation and/or copy without 
permission is not allowed. If you have received this e-mail and you are not the 
intended recipient, please let us know and erase the message and attached 
files. Thank you.
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] via zone

[Gregg Malcolm]

Outvia is when using Gateway to Gatekeeper (ARQ). Invia is when using
Gatekeeper to Gatekeeper (LRQ - remote zone)

On Thu, May 12, 2011 at 4:40 PM, Santiago Figueroa wrote:

>  Hello I have a doubt when is necessary to use VIA zone invia or outvia?
>
>
>
>
>
> Thanks.
>
>
>
>
>
> --
> La información incluida en este mensaje y sus anexos es CONFIDENCIAL y para
> USO EXCLUSIVO de sus destinatarios. No está permitida su divulgación y/o
> reproducción sin autorización. Si ha recibido este mensaje y no le incumbe,
> le rogamos nos los comunique y proceda a su borrado. Gracias.
>
> Information included in this e-mail and attached files is CONFIDENTIAL and
> only for the EXCLUSIVE USE of the receivers. Circulation and/or copy without
> permission is not allowed. If you have received this e-mail and you are not
> the intended recipient, please let us know and erase the message and
> attached files. Thank you.
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] via zone

[Santiago Figueroa]

Hello I have a doubt when is necessary to use VIA zone invia or outvia?


Thanks.




La informaci?n incluida en este mensaje y sus anexos es CONFIDENCIAL y para USO 
EXCLUSIVO de sus destinatarios. No est? permitida su divulgaci?n y/o 
reproducci?n sin autorizaci?n. Si ha recibido este mensaje y no le incumbe, le 
rogamos nos los comunique y proceda a su borrado. Gracias.

Information included in this e-mail and attached files is CONFIDENTIAL and only 
for the EXCLUSIVE USE of the receivers. Circulation and/or copy without 
permission is not allowed. If you have received this e-mail and you are not the 
intended recipient, please let us know and erase the message and attached 
files. Thank you.
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] RSVP within 2 different location is fine but via GK is a problem

[Ki Wi]

After future troubleshooting, it seems like RSVP went the wrong way, it went
to BR1 router instead of BR2 router.


I wonder, how should i configure it to make RSVP working. Am i suppose to
get BR2's MTP to be registered to CUCM as well?

On Fri, May 13, 2011 at 3:39 AM, Ki Wi  wrote:

> Hi Guys,
> I'm new to RSVP.
>
> I got RSVP working between 2 different location ( HQ and BR1) .
> In individual MRL, i registered a software MTP rsvp agent
>
> I have registered RSVP agent for BR2 (CME) , in dial-peer i have set
> req-qos guarantee-load and acc-qos guarantee-load, what else I'm missing?
> For GK trunk configuration in CUCM, i allocated default CUCM software MTP
> to it, is it correct? I don't think by registering MTP from BR2 to it is the
> way to go and it's not very logically.
>
> In order to have RSVP for H.323 via GK, what else do I have to do ? If
> there's a guide for H323/GK related, please point me to it.
>
> Cheers,
> Ki Wi
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Voice] RSVP within 2 different location is fine but via GK is a problem

[Ki Wi]

Hi Guys,
I'm new to RSVP.

I got RSVP working between 2 different location ( HQ and BR1) .
In individual MRL, i registered a software MTP rsvp agent

I have registered RSVP agent for BR2 (CME) , in dial-peer i have set req-qos
guarantee-load and acc-qos guarantee-load, what else I'm missing?
For GK trunk configuration in CUCM, i allocated default CUCM software MTP to
it, is it correct? I don't think by registering MTP from BR2 to it is the
way to go and it's not very logically.

In order to have RSVP for H.323 via GK, what else do I have to do ? If
there's a guide for H323/GK related, please point me to it.

Cheers,
Ki Wi
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] cme to registered to GK

[santiago]

Thanks for your reply, now I understand.




De: ccie_voice-boun...@onlinestudylist.com 
[mailto:ccie_voice-boun...@onlinestudylist.com] En nombre de Shrini
Enviado el: Jueves, 12 de Mayo de 2011 10:18 a.m.
Para: ccie_voice@onlinestudylist.com
Asunto: Re: [OSL | CCIE_Voice] cme to registered to GK

Lot of people get confused here.

On CME router under the h323 interface

h323-gat voip tech-prefix 2#  ---> this means CME will register with GK 
and is using this tech prefix

under dial-peer v 100 voip
tech-prefix 1#   > this means the outgoing calls will have tech 
prefix of 1# (Incoming calls are not affected) and here if you dial 1001 on GK 
you will see 1#1001.

to understand more see the output of sh gatekee gw-type-prefix

On 5/11/2011 4:37 PM, @mnet.com.mx wrote:

Hello I need to know why reason is neccesary to have a h323-gateway voip 
tech-prefix 2# and diail-peer voice 100 voip tech-prefix 1#,why can to be 
different the tech-prefix.This when is registered the ccme to GK. What is the 
requeriments to have this configuration?

Thnaks.


La información incluida en este mensaje y sus anexos es CONFIDENCIAL y para USO 
EXCLUSIVO de sus destinatarios. No está permitida su divulgación y/o 
reproducción sin autorización. Si ha recibido este mensaje y no le incumbe, le 
rogamos nos los comunique y proceda a su borrado. Gracias.

Information included in this e-mail and attached files is CONFIDENTIAL and only 
for the EXCLUSIVE USE of the receivers. Circulation and/or copy without 
permission is not allowed. If you have received this e-mail and you are not the 
intended recipient, please let us know and erase the message and attached 
files. Thank you.






___

For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com



Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com


La información incluida en este mensaje y sus anexos es CONFIDENCIAL y para USO 
EXCLUSIVO de sus destinatarios. No está permitida su divulgación y/o 
reproducción sin autorización. Si ha recibido este mensaje y no le incumbe, le 
rogamos nos los comunique y proceda a su borrado. Gracias.

Information included in this e-mail and attached files is CONFIDENTIAL and only 
for the EXCLUSIVE USE of the receivers. Circulation and/or copy without 
permission is not allowed. If you have received this e-mail and you are not the 
intended recipient, please let us know and erase the message and attached 
files. Thank you.
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] Calls via GK to use G711

[Ki Wi]

Oops.. it's ok now. After fixing some region issue. Took a bad vmware
snapshot the other day.

On Fri, May 13, 2011 at 12:50 AM, Ki Wi  wrote:

> I'm calling from CUCM to CME
>
> I have hardcode all the inter and intra-regions to use g711. When using
> default g729, it is working fine. When switch to g711, it fails. What else
> do i need to enable?
>
> I'm doing this because i wanted to test whether can I use "bandwidth
> session" to restrict individual calls to g729 instead of setting it in
> location.
>
>
>
> R1 is the GK and R3 is the remote GW
>
> R1#sh run | be gatekeeper
> gatekeeper
>  zone local GK ccievoice.com 142.102.64.254
>  zone local R3 ccievoice
>  zone prefix R3 1...
>  zone prefix GK 2...
>  zone prefix GK 3...
>  gw-type-prefix 1#* default-technology
>  no shutdown
>
>
>
> --
>
> R3#sh run int lo0
> Building configuration...
>
> Current configuration : 256 bytes
> !
> interface Loopback0
>  ip address 142.1.66.254 255.255.255.0
>  h323-gateway voip interface
>  h323-gateway voip id R3 ipaddr 142.102.64.254 1719
>  h323-gateway voip h323-id R3
>  h323-gateway voip tech-prefix 1#
>  h323-gateway voip bind srcaddr 142.1.66.254
> end
>
> R3#sh run | s dial-peer
> dial-peer voice 1 voip
>  destination-pattern [23]...
>  session target ras
>  tech-prefix 1#
>  codec g711ulaw
>
>
>
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] cme to registered to GK

[Shrini]

Lot of people get confused here.

On CME router under the h323 interface

h323-gat voip tech-prefix 2#  ---> this means CME will register 
with GK and is using this tech prefix


under dial-peer v 100 voip
tech-prefix 1#   > this means the outgoing calls will have 
tech prefix of 1# (Incoming calls are not affected) and here if you dial 
1001 on GK you will see 1#1001.


to understand more see the output of sh gatekee gw-type-prefix

On 5/11/2011 4:37 PM, @mnet.com.mx wrote:


Hello I need to know why reason is neccesary to have a h323-gateway 
voip tech-prefix 2# and diail-peer voice 100 voip tech-prefix 1#,why 
can to be different the tech-prefix.This when is registered the ccme 
to GK. What is the requeriments to have this configuration?


Thnaks.



La información incluida en este mensaje y sus anexos es CONFIDENCIAL y 
para USO EXCLUSIVO de sus destinatarios. No está permitida su 
divulgación y/o reproducción sin autorización. Si ha recibido este 
mensaje y no le incumbe, le rogamos nos los comunique y proceda a su 
borrado. Gracias.


Information included in this e-mail and attached files is CONFIDENTIAL 
and only for the EXCLUSIVE USE of the receivers. Circulation and/or 
copy without permission is not allowed. If you have received this 
e-mail and you are not the intended recipient, please let us know and 
erase the message and attached files. Thank you.



___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Voice] CUCM Session Manager Edition

[Ravindra Lakpriya]

Hi Guys,

I'm thinking about ordering SME for testing purposes. Is it available
in the Demo DVD kit ? i cant find any information about it such as
installation guide or anything.

Any of u came across this ?

Kind regards
Ravindra
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com