Re: [OSL | CCIE_Voice] MVA

[Rrcrumm]

Ok thanks i will try that soon

Randall

On Dec 22, 2012, at 11:15 PM, Steffen Bruening  wrote:

> Only in the connect state, not in the ringing state
> 
> Am Sonntag, 23. Dezember 2012 schrieb Rrcrumm :
>> Sorry
>> I call from the local site B PSTN phone that is configured for a RDP and RD
>> 
>> I call the MVA number put in my pin, press 1 to dial a number and dial 2001.
>> 
>> When I look at the screen of hqph1 I just see the extension 3001 is calling, 
>> no name.
>> 
>> Should I see a name and number?
>> 
>> Thanks
>> Randall
>> 
>> On Dec 22, 2012, at 10:36 PM, Steffen Bruening  wrote:
>> 
>>> What so you want to see? You are calling from a PSTN number into the XML 
>>> Script. When you call a internal number through the mva, you will the 
>>> number am when the destination hooks up and the call is connected you will 
>>> also see the name.
>>> 
>>> Am Sonntag, 23. Dezember 2012 schrieb Rrcrumm :
 Hello
 I have set up MVA and it seems to be working properly
 
 One question,
 Are we suppose to see name and number when we make a call to the MVA 
 number and then press one to dial another number and we cal an internal 
 extension?
 
 Thanks
 Randall
 ___
 For more information regarding industry leading CCIE Lab training, please 
 visit www.ipexpert.com
 
 Are you a CCNP or CCIE and looking for a job? Check out 
 www.PlatinumPlacement.com
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] MVA

[Steffen Bruening]

Only in the connect state, not in the ringing state

Am Sonntag, 23. Dezember 2012 schrieb Rrcrumm :

> Sorry
> I call from the local site B PSTN phone that is configured for a RDP and RD
>
> I call the MVA number put in my pin, press 1 to dial a number and dial
> 2001.
>
> When I look at the screen of hqph1 I just see the extension 3001 is
> calling, no name.
>
> Should I see a name and number?
>
> Thanks
> Randall
>
> On Dec 22, 2012, at 10:36 PM, Steffen Bruening 
> >
> wrote:
>
> What so you want to see? You are calling from a PSTN number into the XML
> Script. When you call a internal number through the mva, you will the
> number am when the destination hooks up and the call is connected you will
> also see the name.
>
> Am Sonntag, 23. Dezember 2012 schrieb Rrcrumm :
>
>> Hello
>> I have set up MVA and it seems to be working properly
>>
>> One question,
>> Are we suppose to see name and number when we make a call to the MVA
>> number and then press one to dial another number and we cal an internal
>> extension?
>>
>> Thanks
>> Randall
>> ___
>> For more information regarding industry leading CCIE Lab training, please
>> visit www.ipexpert.com
>>
>> Are you a CCNP or CCIE and looking for a job? Check out
>> www.PlatinumPlacement.com
>>
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] MVA

[Rrcrumm]

Sorry
I call from the local site B PSTN phone that is configured for a RDP and RD

I call the MVA number put in my pin, press 1 to dial a number and dial 2001.

When I look at the screen of hqph1 I just see the extension 3001 is calling, no 
name.

Should I see a name and number?

Thanks
Randall

On Dec 22, 2012, at 10:36 PM, Steffen Bruening  wrote:

> What so you want to see? You are calling from a PSTN number into the XML 
> Script. When you call a internal number through the mva, you will the number 
> am when the destination hooks up and the call is connected you will also see 
> the name.
> 
> Am Sonntag, 23. Dezember 2012 schrieb Rrcrumm :
>> Hello
>> I have set up MVA and it seems to be working properly
>> 
>> One question,
>> Are we suppose to see name and number when we make a call to the MVA number 
>> and then press one to dial another number and we cal an internal extension?
>> 
>> Thanks
>> Randall
>> ___
>> For more information regarding industry leading CCIE Lab training, please 
>> visit www.ipexpert.com
>> 
>> Are you a CCNP or CCIE and looking for a job? Check out 
>> www.PlatinumPlacement.com
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] MVA

[Steffen Bruening]

What so you want to see? You are calling from a PSTN number into the XML
Script. When you call a internal number through the mva, you will the
number am when the destination hooks up and the call is connected you will
also see the name.

Am Sonntag, 23. Dezember 2012 schrieb Rrcrumm :

> Hello
> I have set up MVA and it seems to be working properly
>
> One question,
> Are we suppose to see name and number when we make a call to the MVA
> number and then press one to dial another number and we cal an internal
> extension?
>
> Thanks
> Randall
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] Lab question call routing

[Cory Gray]

You get points for questions in a particular section.  If there is an OB
Unity Question in the Unity Section and SRST in the SRST section then no.
You could theoretically get a 100% on call routing and get a 0% on those
other two sections.

-Original Message-
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Rrcrumm
Sent: Saturday, December 22, 2012 10:15 PM
To: Ccie
Subject: [OSL | CCIE_Voice] Lab question call routing

Hello,
Do you lose points in the call routing section if your SRST call routing is
not sending the correct ANI and/or DNIS  or if OB calls from Unity
Connections are not sent with the correct ANI and/or DNIS? 
 
Or do you just lose points for that particular question.
___
For more information regarding industry leading CCIE Lab training, please
visit www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com

___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Voice] CME srst queries...

[virajith]

HI Guys,

I have configured cme-srst on my router to  support phones  & 
gateway function  when the wan is down and when my mgcp gateway unreg from 
callmanger. Now the requirement is that voicemail forwarding using CUE should 
work between ip phones as well as PSTN calls and that the forwarded calls 
should play user greeting and MWI must work. How do I achieve this given that 
the cue has also lost connectivity with the callmanger ( jtapi integ) as is on 
the same srst router


Topology:

===  


CUCM - WAN link cut---mgcp gateway ( now in cme srst ) 
--( on the same router cue- jtapi 

integration is there and  has lost connectivity 
with callmanger)


Thanks,
Vir



___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Voice] LAN QoS

[Rrcrumm]

Does someone have a complete solution on how to configure LAN QoS in regard to 
the CUpC client?

Thanks

Randall
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Voice] Unassigned DN's

[Rrcrumm]

Hello
Does someone know a solution how to do the unassigned DN question?

Thanks

Randall
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Voice] Lab question call routing

[Rrcrumm]

Hello,
Do you lose points in the call routing section if your SRST call routing is not 
sending the correct ANI and/or DNIS  or if OB calls from Unity Connections are 
not sent with the correct ANI and/or DNIS? 
 
Or do you just lose points for that particular question.
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Voice] MVA

[Rrcrumm]

Hello
I have set up MVA and it seems to be working properly

One question,
Are we suppose to see name and number when we make a call to the MVA number and 
then press one to dial another number and we cal an internal extension?

Thanks
Randall
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] Meet me conference - Unity connection.

[Zahwar Hussain]

*CUCM*

1. Configure Conf Bridge in HQ router - assign to HQ MRGL

2. Create meetme partition, assign to css HQPH1, so only hqph1 can call

(Bypass the CTI RP, and go to Meetme initiate)

Also assign meetme partition to Meetme-CSS and then
to *VM-port-CSS*

3. Add Meetme to button 6 of hqph1

4. Create meet me number of 2501 in meet me and assign MEET-ME-PT

5. Add CTI RP for Meetme - DN 2501 in None Partition - CFA to Voicemail

(all users other than HQPH1 go through CTI RP)

*Unity:*

6.Add user MEET_ME: assign extension, make sure to have correct phone
-system-.save it. Uncheck List in directory and set for self enrolment.

7. Create Call Handler - MEETME - in System Call Handler

Edità Transfer rule- Standard – Transfer calls
to::ExT:2501

Transfer Type =Supervise Transfer

Check play wait while transfer your call

If ext is busy- send caller to VM

Check=Ask for Caller's Name

EditàGreetings- Standard

Caller Hears=Nothing

After Greeting- User with Mail box=HQPH1 o attempt
to transfer.

8.Come back to user Meet_Me;

Edit-àGreetings – Standard

Callers hears- Nothing

After Greeting – call handler= MEETme o attempt to transfer.


On Fri, Dec 21, 2012 at 6:04 AM, virajith  wrote:

>
> hi All,
>
> Do anyone know to configure unity connection such that when a phone user
> presses the Meet me
> conf button ..it announces the participant name and when somebody dials
> the meet me number
> it asks " who may I say is calling"
>
> Please elaborate the configuration steps used if possible?
>
> - Vir
>
>
> 
> Catch India as it happens with the *Rediff News App*. To download it for
> FREE, click 
> here
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] MGCP gateway : DDI for International Route Pattern options

[Steffen Bruening]

Why is predot trailing needed for mgcp? I use always only predot and it
works perfect.


2012/12/22 Chrysostomos Christofi 

>  Ramcharan , hi
>
> ** **
>
> Both route patterns for the below are correct 
>
> It depends what the question ask , or what is your requirement
>
> ** **
>
> **1)  **With #  in the h323 you don’t have to use Predot trailing # you 
> can use only Predot
> but for MGCP GW its need it. But its not any harm if you use  Predot
> trailing # for h323 also
>
> Regards
>
> ** **
>
> ** **
>
> *From:* ccie_voice-boun...@onlinestudylist.com [mailto:
> ccie_voice-boun...@onlinestudylist.com] *On Behalf Of *Ramcharan Arya
> *Sent:* Σάββατο, 22 Δεκεμβρίου 2012 8:14 μμ
>
> *To:* ccie_voice@onlinestudylist.com
> *Subject:* [OSL | CCIE_Voice] MGCP gateway : DDI for International Route
> Pattern options
>
> ** **
>
> Hello,
>
>
> I have a requirement to use SLRG for International destination:
>
> First gateway : Site B ( H.323)
> Second gateway : Site A (MGCP)
>
>
> My route patterns are below:
>
> RP : 9011.!  pt: pt-sa-int
> RP : 9011.i#  pt: pt-sa-int
>
> Option : 1
> RL: SLRG
> DDI: NANP: Predot
>
> Option : 2
> RL: SLRG
> DDI: NANP: Predot trailing #
>
>
> Can you suggest which DDI is correct  correct for the above route pattern.
> Thanks & Regards,
> Ramcharan Arya
> CCIE # 28926 (R&S)
>
> 
>
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] MGCP gateway : DDI for International Route Pattern options

[Chrysostomos Christofi]

Ramcharan , hi

Both route patterns for the below are correct
It depends what the question ask , or what is your requirement


1)  With #  in the h323 you don't have to use Predot trailing #  you can 
use only Predot but for MGCP GW its need it. But its not any harm if you use  
Predot trailing # for h323 also
Regards


From: ccie_voice-boun...@onlinestudylist.com 
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Ramcharan Arya
Sent: Σάββατο, 22 Δεκεμβρίου 2012 8:14 μμ
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] MGCP gateway : DDI for International Route Pattern 
options

Hello,

I have a requirement to use SLRG for International destination:

First gateway : Site B ( H.323)
Second gateway : Site A (MGCP)


My route patterns are below:

RP : 9011.!  pt: pt-sa-int
RP : 9011.i#  pt: pt-sa-int

Option : 1
RL: SLRG
DDI: NANP: Predot

Option : 2
RL: SLRG
DDI: NANP: Predot trailing #


Can you suggest which DDI is correct  correct for the above route pattern.
Thanks & Regards,
Ramcharan Arya
CCIE # 28926 (R&S)

___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] MGCP gateway : DDI for International Route Pattern options

[Mohamed Gazzaz]

The second option will work with both route patterns. I tested it several times 
and it always worked for me.

Regards,
Mohamed Gazzaz

Date: Sat, 22 Dec 2012 11:52:28 -0600
From: ramcharan.a...@gmail.com
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] MGCP gateway : DDI for International Route  Pattern 
options

Hello,

I have a requirement to use SLRG for International destination:

First gateway : Site B ( H.323)
Second gateway : Site A (MGCP)


My route patterns are below:

RP : 9011.!  pt: pt-sa-int

RP : 9011.i#  pt: pt-sa-int

Option : 1
RL: SLRG
DDI: NANP: Predot 

Option : 2
RL: SLRG
DDI: NANP: Predot trailing #


Can you suggest which DDI is correct  correct for the above route pattern.

Thanks & Regards,
Ramcharan Arya
CCIE # 28926 (R&S)




___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com ___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] CUCM slow while changing service parameter

[Ramcharan Arya]

Hi Bill,

This is an ESXi 5.1 think deployment.

Regards,
Ramcharan Arya



On Sat, Dec 22, 2012 at 11:33 AM, Bill Lake  wrote:

> Are you running this in VM inside an OS or ESXi
>
>
>
> On Sat, Dec 22, 2012 at 7:56 AM, Ramcharan Arya 
> wrote:
>
>> Hello,
>>
>> My CUCM response is very slow when I update Cisco Callmanager service
>> paramter. It is running on vm.
>>
>> Can you please suggest is there any setting on vm to improve the
>> performance.
>>
>> Rest everything works normal.
>>
>> Please suggest if you have any technical detail to share about this.
>>
>> Regards,
>> Ramcharan Arya
>>
>>
>> ___
>> For more information regarding industry leading CCIE Lab training, please
>> visit www.ipexpert.com
>>
>> Are you a CCNP or CCIE and looking for a job? Check out
>> www.PlatinumPlacement.com
>>
>
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Voice] uccx scripting side

[Chrysostomos Christofi]

Tanner

Its working fine now

Thank you very much

Regards
Chrysostomos


From: Tanner Ezell [mailto:tanner.ez...@gmail.com]
Sent: Παρασκευή, 21 Δεκεμβρίου 2012 9:03 μμ
To: Chrysostomos Christofi
Cc: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] uccx scripting side

Oops, you know what. I forgot substring doesn't include the last character. 
You'll need Callerinfo.substring(0,3).
On Fri, Dec 21, 2012 at 11:01 AM, Chrysostomos Christofi 
mailto:ch.christ...@logicom.net>> wrote:
Yes its substring but I couldn't get the correct format for my case :)
Calling number 996. and I used the below is look like that is not correct 
right?

Callerinfo .substring(0,2 )=="996"


From: Tanner Ezell 
[mailto:tanner.ez...@gmail.com]
Sent: Παρασκευή, 21 Δεκεμβρίου 2012 6:08 μμ
To: Chrysostomos Christofi
Cc: ccie_voice@onlinestudylist.com

Subject: Re: [OSL | CCIE_Voice] uccx scripting side

subString should be "substring".
On Fri, Dec 21, 2012 at 9:04 AM, Chrysostomos Christofi 
mailto:ch.christ...@logicom.net>> wrote:
Sorry Tanner but I am not find in the string methods the substring .Are you 
sure that this is the correct name?

From: Tanner Ezell 
[mailto:tanner.ez...@gmail.com]
Sent: Παρασκευή, 21 Δεκεμβρίου 2012 5:53 μμ

To: Chrysostomos Christofi
Cc: Online Study 
(ccie_voice@onlinestudylist.com)
Subject: Re: [OSL | CCIE_Voice] uccx scripting side

charAt will only return a single character, which you are testing against a 
string of characters. For your particular case then you would use subString as 
such

Callerinfo.subString(0,2) == "996".

subString(0 = where to start, 2 = where to end) will return the bytes between 
and including the start, and end in this case that is 3 bytes as CallerInfo[0] 
+ CallerInfo[1] + CallerInfo[2]

HTH
Tanner

On Fri, Dec 21, 2012 at 8:48 AM, Chrysostomos Christofi 
mailto:ch.christ...@logicom.net>> wrote:
Hi

I use Callerinfo.charAt(0) == "996" in the IF (my calling number starting with 
996... but unfortunately its not matching

I am doing something wrong?

From: 
ccie_voice-boun...@onlinestudylist.com
 
[mailto:ccie_voice-boun...@onlinestudylist.com]
 On Behalf Of Chrysostomos Christofi
Sent: Παρασκευή, 21 Δεκεμβρίου 2012 5:27 μμ
To: Tanner Ezell

Cc: Online Study 
(ccie_voice@onlinestudylist.com)
Subject: Re: [OSL | CCIE_Voice] uccx scripting side

Thanks a lot tanner

I will check if its working your propose and I will return back with a feedback

Regards
cc

From: Tanner Ezell [mailto:tanner.ez...@gmail.com]
Sent: Παρασκευή, 21 Δεκεμβρίου 2012 4:51 μμ
To: Chrysostomos Christofi
Cc: Online Study 
(ccie_voice@onlinestudylist.com)
Subject: Re: [OSL | CCIE_Voice] uccx scripting side

"5.*" would imply RegEx type of expressions, which may be possible but you need 
to explicitly define that. You're better off doing something like 
myString.charAt(0) == "5" as it should meet your needs quite easily.

If you are not using a premium license or are otherwise unable to use the java 
methods you could also use a Menu Step, have two branches, one for "5" and one 
for everything else" and throw a get digit string step under the 5 branch to 
collect the rest.

HTH
Tanner
On Fri, Dec 21, 2012 at 7:39 AM, Chrysostomos Christofi 
mailto:ch.christ...@logicom.net>> wrote:
Hi Folks

I have created a script that will root the call base of caller number:
I used get call contact info .Its working ok if I set only a specific number in 
the if section
What I have to config in the callinginfo to match any number starting with 5 ? 
(something like 5!)

Attached is the script

I used 5.* but its not working


Regards
Chrysostomos



___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com




___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] CUCM slow while changing service parameter

[Bill Lake]

Are you running this in VM inside an OS or ESXi



On Sat, Dec 22, 2012 at 7:56 AM, Ramcharan Arya wrote:

> Hello,
>
> My CUCM response is very slow when I update Cisco Callmanager service
> paramter. It is running on vm.
>
> Can you please suggest is there any setting on vm to improve the
> performance.
>
> Rest everything works normal.
>
> Please suggest if you have any technical detail to share about this.
>
> Regards,
> Ramcharan Arya
>
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] CUCM slow while changing service parameter

[scubajasona]

Dors stopping multicast moh resolve the issue? 


Sent from my Verizon Wireless 4G LTE Smartphone

 Original message 
From: Ramcharan Arya  
Date:  
To: scubajasona  
Cc: ccie_voice@onlinestudylist.com 
Subject: Re: [OSL | CCIE_Voice] CUCM slow while changing service parameter 
 
Yes MOH is configured as per task. 

Is there any workaroun/solution to fix this problem.

Regards,
Ramcharan Arya

On Sat, Dec 22, 2012 at 9:04 AM, scubajasona  wrote:
Is multicast moh enabled? Seems enabling multicast slows my vmware workstation 
down. Floods 239.x.x.x nonstop.

___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] CUCM slow while changing service parameter

[Ramcharan Arya]

Yes MOH is configured as per task.

Is there any workaroun/solution to fix this problem.

Regards,
Ramcharan Arya

On Sat, Dec 22, 2012 at 9:04 AM, scubajasona  wrote:

> Is multicast moh enabled? Seems enabling multicast slows my vmware
> workstation down. Floods 239.x.x.x nonstop.
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] CUCM slow while changing service parameter

[scubajasona]

Is multicast moh enabled? Seems enabling multicast slows my vmware workstation 
down. Floods 239.x.x.x nonstop.


Sent from my Verizon Wireless 4G LTE Smartphone

 Original message 
From: Ramcharan Arya  
Date:  
To: ccie_voice@onlinestudylist.com 
Subject: [OSL | CCIE_Voice] CUCM slow while changing service parameter 
 
Hello,

My CUCM response is very slow when I update Cisco Callmanager service paramter. 
It is running on vm.

Can you please suggest is there any setting on vm to improve the performance.

Rest everything works normal.

Please suggest if you have any technical detail to share about this.

Regards,
Ramcharan Arya

___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Voice] CUCM slow while changing service parameter

[Ramcharan Arya]

Hello,

My CUCM response is very slow when I update Cisco Callmanager service
paramter. It is running on vm.

Can you please suggest is there any setting on vm to improve the
performance.

Rest everything works normal.

Please suggest if you have any technical detail to share about this.

Regards,
Ramcharan Arya
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com