Re: [OSL | CCIE_Voice] How to solve the LFI LLQ for Router QOS?
HI, policy-map AutoQoS-Policy-Trust class AutoQoS-VoIP-RTP-Trust priority 45 --- 11.2 x4 = 44,8 compress header ip rtp Salim On Thu, May 23, 2013 at 5:52 AM, Hesham Abdelkereem heshamcentr...@gmail.com wrote: Dear Experts, I have solved the LLQ LFI for Router QOS with exactly the following solution and I have never scored any points in the section. Kindy , Please could you tell me what I am missing ? ON HQ SB Routers Set the Bandwidth to 384 for LFI under the frame relay dlci enable the autoqos auto qos voip trust map-class frame-relay AutoQoS-FR-Se0/0/1:0-101 frame-relay cir 384000 frame-relay bc 3840 frame-relay be 0 frame-relay mincir 384000 frame-relay fragment 480 service-policy output AutoQoS-Policy-Trust to frame-relay cir 364800 frame-relay bc 3648 frame-relay be 0 frame-relay mincir 364800 policy-map AutoQoS-Policy-Trust class AutoQoS-VoIP-RTP-Trust priority percent 70 class AutoQoS-VoIP-Control-Trust bandwidth percent 5 class class-default fair-queue TO policy-map AutoQoS-Policy-Trust class AutoQoS-VoIP-RTP-Trust priority 47 class AutoQoS-VoIP-Control-Trust bandwidth 16 class class-default fair-queue UNDER HQ-SC LINK wr need to apply a special class map for that link map-class frame-relay FR-Se0/0/1:0-201 frame-relay cir 1466800 frame-relay bc 14668 frame-relay be 0 frame-relay mincir 1466800 interface Serial0/0/1:0.2 point-to-point frame-relay interface-dlci 201 class FR-Se0/0/1:0-201 After finishing then last thing just do on both HQ and SB Router HQ Router interface Serial0/1/1:0.102 point-to-point no frame-relay ip rtp header-compression ! policy-map AutoQoS-Policy-Trust class AutoQoS-VoIP-RTP-Trust priority 47 compress header ip rtp SB Router interface Serial0/1/0:0.102 point-to-point no frame-relay ip rtp header-compression ! policy-map AutoQoS-Policy-Trust class AutoQoS-VoIP-RTP-Trust priority 47 compress header ip rtp Please let me know whats missing? Thanks, Hesham ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] xfer to VM in 2key stroke
still need 3 keys to complete the transfer, 1. transfer[soft key]2. transfer-VM[button]: speed dial3. transfer[soft key] any tricks? From: ccie2...@gmail.com To: ccie_voice@onlinestudylist.com Date: Fri, 24 May 2013 12:52:37 +0500 Subject: Re: [OSL | CCIE_Voice] xfer to VM in 2key stroke if it's just one phone button then, all you need to do is to create a speed dial to vm and set service parameter transfer on-hook to true as transfer softkey is already there in connected state. regards, From: ikizoo hello [mailto:ikiz...@hotmail.com] Sent: Friday, May 24, 2013 12:00 PM To: ali raza; ccie_voice@onlinestudylist.com Subject: RE: [OSL | CCIE_Voice] xfer to VM in 2key stroke in the question, shows the phone screen clearly that line button and xsfer-VM[button]: speed dial only. no Transfer button. thanks -ikizoo From: ccie2...@gmail.com To: ccie_voice@onlinestudylist.com Date: Fri, 24 May 2013 11:26:54 +0500 Subject: Re: [OSL | CCIE_Voice] xfer to VM in 2key stroke I believe there are two ways of doing this First way (must be the correct way) Assign transfer key to a phone button Assign speed dial to VM-Box on another button Set transfer on-hook service parameter to true. call comes in pickup the call hit transfer hit VM speed dial hang-up Second Way (I would call it stupid way) create a soft-key template for Ring In state add iDivert soft-key add two or three (or as many are needed) Undefined between iDivert key and other keys( i.e. Answer, DND keys), so that the iDivert key would come after hitting more key. now when the call rings hit more (key stroke 1) hit iDivert ( key stroke 2) stupid I believe but its two key strokes, I call it stupid cuz actually that was one key solution, which we made two key solution. Regards, From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Avrille Alvaris Sent: Friday, May 24, 2013 10:44 AM To: ikizoo hello; ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] xfer to VM in 2key stroke No you are wrong! Yes transfer on hook is right thanks From: ikizoo hello ikiz...@hotmail.com To: ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com Sent: Friday, May 24, 2013 8:01 AM Subject: [OSL | CCIE_Voice] xfer to VM in 2key stroke question says 2 key stroke but the solution using vm pilot mask need 3 key stroke to complete transfer caller to VM 1. transfer[soft key] 2. transfer-VM[button]: speed dial 3. transfer[soft key] transfer on-hook is only solution? - ikizoo ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] xfer to VM in 2key stroke
As I mentioned before in addition to the transfer soft key and VM button speed dial. we need to set TransferOnHookEnabled service parameter to True. regards, From: ikizoo hello [mailto:ikiz...@hotmail.com] Sent: Saturday, May 25, 2013 11:49 AM To: ccie2k12; ccie_voice@onlinestudylist.com Subject: RE: [OSL | CCIE_Voice] xfer to VM in 2key stroke still need 3 keys to complete the transfer, 1. transfer[soft key] 2. transfer-VM[button]: speed dial 3. transfer[soft key] any tricks? _ From: ccie2...@gmail.com To: ccie_voice@onlinestudylist.com Date: Fri, 24 May 2013 12:52:37 +0500 Subject: Re: [OSL | CCIE_Voice] xfer to VM in 2key stroke if it's just one phone button then, all you need to do is to create a speed dial to vm and set service parameter transfer on-hook to true as transfer softkey is already there in connected state. regards, From: ikizoo hello [mailto:ikiz...@hotmail.com] Sent: Friday, May 24, 2013 12:00 PM To: ali raza; ccie_voice@onlinestudylist.com Subject: RE: [OSL | CCIE_Voice] xfer to VM in 2key stroke in the question, shows the phone screen clearly that line button and xsfer-VM[button]: speed dial only. no Transfer button. thanks -ikizoo _ From: ccie2...@gmail.com To: ccie_voice@onlinestudylist.com Date: Fri, 24 May 2013 11:26:54 +0500 Subject: Re: [OSL | CCIE_Voice] xfer to VM in 2key stroke I believe there are two ways of doing this First way (must be the correct way) Assign transfer key to a phone button Assign speed dial to VM-Box on another button Set transfer on-hook service parameter to true. call comes in pickup the call hit transfer hit VM speed dial hang-up Second Way (I would call it stupid way) create a soft-key template for Ring In state add iDivert soft-key add two or three (or as many are needed) Undefined between iDivert key and other keys( i.e. Answer, DND keys), so that the iDivert key would come after hitting more key. now when the call rings hit more (key stroke 1) hit iDivert ( key stroke 2) stupid I believe but its two key strokes, I call it stupid cuz actually that was one key solution, which we made two key solution. Regards, From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Avrille Alvaris Sent: Friday, May 24, 2013 10:44 AM To: ikizoo hello; ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] xfer to VM in 2key stroke No you are wrong! Yes transfer on hook is right thanks _ From: ikizoo hello ikiz...@hotmail.com To: ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com Sent: Friday, May 24, 2013 8:01 AM Subject: [OSL | CCIE_Voice] xfer to VM in 2key stroke question says 2 key stroke but the solution using vm pilot mask need 3 key stroke to complete transfer caller to VM 1. transfer[soft key] 2. transfer-VM[button]: speed dial 3. transfer[soft key] transfer on-hook is only solution? - ikizoo ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] SNMP callmanager
Hi Can anyone guide me how to configure SNMP in Call manager so that we can monitor on SNMP tool.. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] SNMP callmanager
Did you try using this? http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/service/8_6_1/admin/sasnmpv1.html Or just google it to get videos like this http://m.youtube.com/#/watch?v=fxV2SP3Xmtwdesktop_uri=%2Fwatch%3Fv%3DfxV2SP3Xmtw Sent from my iPad On May 25, 2013, at 5:04 AM, Dharambir kumar varma dharambi...@gmail.com wrote: Hi Can anyone guide me how to configure SNMP in Call manager so that we can monitor on SNMP tool.. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] MVA Display Name
check this : https://supportforums.cisco.com/docs/DOC-3052 greeting On Fri, May 24, 2013 at 6:34 PM, gowri shankar gowrishankar...@gmail.comwrote: HI experts, When i enable fast start, during MVA internal call from PSTN i am not able to see the display name what could be the problem? -- ThanksRegards* Gowri shankar.S * * * * * * * * * * * * If u r born poor, its not your mistake BUT if u die poor, its your mistake - BILL GATES* ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] RegardinG MVA
Hi, If u use FS and MVA its not working the guys r saying its a bug...bug...bug wether its a bug or not? -- ThanksRegards* Gowri shankar.S **skype id:- goshankar* *Gtalk:- gowrishankar...@gmail.com* ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
