Re: [OSL | CCIE_Voice] B-ACD
application no service app-b-acd no service app-b-acd-aa On Sat, Jun 22, 2013 at 9:06 AM, Somphol Boonjing wrote: > Hi, > > Are you able to show part of the configuration that you have tried to > remove from the running configuration? > > --Somphol > > > On Sat, Jun 22, 2013 at 1:00 AM, CISCO CCIE VOICE > wrote: > >> Hi, >> >> I am trying to Remove B-ACD configuration but still showing in the >> running configuration i have restarted the router but no look any guess? >> >> >> thanks >> >> >> >> ___ >> For more information regarding industry leading CCIE Lab training, please >> visit www.ipexpert.com >> >> Are you a CCNP or CCIE and looking for a job? Check out >> www.PlatinumPlacement.com >> > > ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] Lab for sale.
Folks, I have the CCIE Voice lab I used to pass my test for sale. It contains: 3x 2811 HQ/SB/SC+CUE SM 1x 3725 PSTN Router 1x 3750x48 Port Switch 8x Phones All needed cables All Prebuilt VMs including CUCM PUB/SUB, CUC Primary, CUPS, UCCX, PC Study material is included and can be discussed offline. Please contact me if interested. Thanks! -- Mark Drucker (925) 321-5791 ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] UCM DHCP
Ovidiu, Yes, & ip helper-address is configured. Regards, Anu On Fri, Jun 21, 2013 at 4:32 PM, Ovidiu Popa wrote: > Hello Anuritha > > Do you by any chance have an SVI on vlan 102 ? > If yes have you tried configuring ip helper-address on that SVI ? > > Regards, > Ovidiu > > > > On Sat, Jun 22, 2013 at 12:26 AM, anuritha konjety > wrote: > >> Hello, >> >>I am having trouble with getting phones Ip address when UCM(pub) is >> configured as the DHCP server. Following is partial config from the switch >> & the router. I have made sure - >> >> 1. Dot1q trunk on HQ-RTR interface (on the switch). Make sure that all >> appropriate vlans are allowed on the trunk link and that native VLAN lines >> up (1 is default). >> 2. Ensure VLANs are provisioned correctly, assigned to the right >> interfaces, and active (sh vlan b) >> 3. Double check scope config on CUCM Pub. Check each parameter. >> 4. Made sure helper-address is configured >> 5. disabled CSA service from pub >> 6. restarted DHCP service several times >> >> DHCP Server : 10.10.210.10 >> subnet IPV4 address: 10.10.200.0 >> primary start addr: 10.10.200.120 >> primary end addr : 10.10.200.130 >> primary router : 10.10.200.3/255.255.255.0 >> >> debug ip dhcp server events: >> SiteA-Switch# >> $ >> >> 01:58:00: DHCPD: Reload workspace interface Vlan102 tableid 0. >> 01:58:00: DHCPD: tableid for 10.10.200.120 on Vlan102 is 0 >> 01:58:00: DHCPD: client's VPN is . >> 01:58:00: DHCPD: Finding a relay for client 0100.1bd4.c698.6c on >> interface Vlan102. >> 01:58:00: DHCPD: there is no pool for 10.10.200.120. >> SiteA-Switch#$ >> 01:58:34: DHCPD: checking for expired leases. >> SiteA-Switch#$ >> 01:59:25: DHCPD: Reload workspace interface Vlan102 tableid 0. >> 01:59:25: DHCPD: tableid for 10.10.200.120 on Vlan102 is 0 >> 01:59:25: DHCPD: client's VPN is . >> 01:59:25: DHCPD: Finding a relay for client 0100.1bd4.c698.6c on >> interface Vlan102. >> 01:59:25: DHCPD: there is no pool for 10.10.200.120. >> >> HQ Switch:- >> >> SiteA-Switch#sh run >> >> interface FastEthernet1/0/1 >> description TRUNK to HQ-RTR >> switchport trunk encapsulation dot1q >> switchport mode trunk >> speed 100 >> duplex full >> ! >> interface FastEthernet1/0/2 >> description HQ PHONE 1- 7960 phone >> switchport access vlan 101 >> switchport mode access >> switchport voice vlan 102 >> spanning-tree portfast >> ! >> interface FastEthernet1/0/3 >> ! >> --More-- interface FastEthernet1/0/4 >> description SERVER port- do not change >> switchport access vlan 103 >> switchport mode access >> duplex half >> spanning-tree portfast >> ! >> >> interface FastEthernet1/0/23 >> description HQ PHONE 2- 7962 phone >> switchport access vlan 101 >> switchport mode access >> switchport voice vlan 102 >> switchport voice detect cisco-phone >> spanning-tree portfast >> ! >> interface FastEthernet1/0/24 >> description *** DO NOT CHANGE - THIS IS YOUR L3 CONNECTION TO YOUR >> VPN!!! *** >> switchport access vlan 101 >> switchport mode access >> speed 100 >> duplex full >> no cdp enable >> ! >> interface GigabitEthernet1/0/1 >> ! >> interface GigabitEthernet1/0/2 >> ! >> --More-- interface Vlan1 >> no ip address >> ! >> interface Vlan101 >> ip address 10.10.100.3 255.255.255.0 >> ! >> interface Vlan102 >> ip address 10.10.200.120 255.255.255.0 >> ! >> control-plane >> ! >> ! >> line con 0 >> exec-timeout 0 0 >> --More-- logging synchronous >> line vty 0 4 >> exec-timeout 0 0 >> privilege level 15 >> logging synchronous >> no login >> line vty 5 15 >> exec-timeout 0 0 >> privilege level 15 >> logging synchronous >> no login >> ! >> end >> >> >> HQ router:- >> >> interface FastEthernet0/0.101 >> encapsulation dot1Q 101 >> ip address 10.10.100.1 255.255.255.0 >> ! >> interface FastEthernet0/0.102 >> encapsulation dot1Q 102 >> ip address 10.10.200.3 255.255.255.0 >> ip helper-address 10.10.210.10 >> ! >> interface FastEthernet0/0.103 >> encapsulation dot1Q 103 >> ip address 10.10.210.1 255.255.255.0 >> ! >> interface FastEthernet0/1 >> no ip address >> shutdown >> duplex auto >> speed auto >> >> >> ___ >> For more information regarding industry leading CCIE Lab training, please >> visit www.ipexpert.com >> >> Are you a CCNP or CCIE and looking for a job? Check out >> www.PlatinumPlacement.com >> > > -- Regards, Anuritha ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] UCM DHCP
Hello Anuritha Do you by any chance have an SVI on vlan 102 ? If yes have you tried configuring ip helper-address on that SVI ? Regards, Ovidiu On Sat, Jun 22, 2013 at 12:26 AM, anuritha konjety wrote: > Hello, > >I am having trouble with getting phones Ip address when UCM(pub) is > configured as the DHCP server. Following is partial config from the switch > & the router. I have made sure - > > 1. Dot1q trunk on HQ-RTR interface (on the switch). Make sure that all > appropriate vlans are allowed on the trunk link and that native VLAN lines > up (1 is default). > 2. Ensure VLANs are provisioned correctly, assigned to the right > interfaces, and active (sh vlan b) > 3. Double check scope config on CUCM Pub. Check each parameter. > 4. Made sure helper-address is configured > 5. disabled CSA service from pub > 6. restarted DHCP service several times > > DHCP Server : 10.10.210.10 > subnet IPV4 address: 10.10.200.0 > primary start addr: 10.10.200.120 > primary end addr : 10.10.200.130 > primary router : 10.10.200.3/255.255.255.0 > > debug ip dhcp server events: > SiteA-Switch# > $ > > 01:58:00: DHCPD: Reload workspace interface Vlan102 tableid 0. > 01:58:00: DHCPD: tableid for 10.10.200.120 on Vlan102 is 0 > 01:58:00: DHCPD: client's VPN is . > 01:58:00: DHCPD: Finding a relay for client 0100.1bd4.c698.6c on interface > Vlan102. > 01:58:00: DHCPD: there is no pool for 10.10.200.120. > SiteA-Switch#$ > 01:58:34: DHCPD: checking for expired leases. > SiteA-Switch#$ > 01:59:25: DHCPD: Reload workspace interface Vlan102 tableid 0. > 01:59:25: DHCPD: tableid for 10.10.200.120 on Vlan102 is 0 > 01:59:25: DHCPD: client's VPN is . > 01:59:25: DHCPD: Finding a relay for client 0100.1bd4.c698.6c on interface > Vlan102. > 01:59:25: DHCPD: there is no pool for 10.10.200.120. > > HQ Switch:- > > SiteA-Switch#sh run > > interface FastEthernet1/0/1 > description TRUNK to HQ-RTR > switchport trunk encapsulation dot1q > switchport mode trunk > speed 100 > duplex full > ! > interface FastEthernet1/0/2 > description HQ PHONE 1- 7960 phone > switchport access vlan 101 > switchport mode access > switchport voice vlan 102 > spanning-tree portfast > ! > interface FastEthernet1/0/3 > ! > --More-- interface FastEthernet1/0/4 > description SERVER port- do not change > switchport access vlan 103 > switchport mode access > duplex half > spanning-tree portfast > ! > > interface FastEthernet1/0/23 > description HQ PHONE 2- 7962 phone > switchport access vlan 101 > switchport mode access > switchport voice vlan 102 > switchport voice detect cisco-phone > spanning-tree portfast > ! > interface FastEthernet1/0/24 > description *** DO NOT CHANGE - THIS IS YOUR L3 CONNECTION TO YOUR VPN!!! > *** > switchport access vlan 101 > switchport mode access > speed 100 > duplex full > no cdp enable > ! > interface GigabitEthernet1/0/1 > ! > interface GigabitEthernet1/0/2 > ! > --More-- interface Vlan1 > no ip address > ! > interface Vlan101 > ip address 10.10.100.3 255.255.255.0 > ! > interface Vlan102 > ip address 10.10.200.120 255.255.255.0 > ! > control-plane > ! > ! > line con 0 > exec-timeout 0 0 > --More-- logging synchronous > line vty 0 4 > exec-timeout 0 0 > privilege level 15 > logging synchronous > no login > line vty 5 15 > exec-timeout 0 0 > privilege level 15 > logging synchronous > no login > ! > end > > > HQ router:- > > interface FastEthernet0/0.101 > encapsulation dot1Q 101 > ip address 10.10.100.1 255.255.255.0 > ! > interface FastEthernet0/0.102 > encapsulation dot1Q 102 > ip address 10.10.200.3 255.255.255.0 > ip helper-address 10.10.210.10 > ! > interface FastEthernet0/0.103 > encapsulation dot1Q 103 > ip address 10.10.210.1 255.255.255.0 > ! > interface FastEthernet0/1 > no ip address > shutdown > duplex auto > speed auto > > > ___ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com > ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] SRST checklist
Follow-up: voice service voip h323 call preserve Ovidiu On Fri, Jun 21, 2013 at 10:40 PM, Ovidiu Popa wrote: > Adding one more for H323 gateways: > > *CUCM service Parameter : Allow Peer to Preserve H.323 Calls* > * > * > Keep it coming guys and gals > > Regards, > Ovidiu > > > On Fri, Jun 21, 2013 at 11:55 AM, Somphol Boonjing wrote: > >> To add to your list that is already good, >> >> - date/time format >> - timezone >> - system message >> - number of max calls & busy call triggers >> - call pickup behavior if applicable (directed vs no directed call pickup) >> - call-transfer pattern >> - call-forward pattern >> - number of channels for ephone (dual, octal) >> - cbarge for shared line if applicable >> - SRST for media resources (via sdspfarm) >> - cptone if applicable >> >> --Somphol. >> >> >> --Somphol >> >> >> On Fri, Jun 21, 2013 at 3:08 PM, Karen Johnson > > wrote: >> >>> >>> all, >>> >>> i am trying to compile SRST check for my next attempt. I never got full >>> mark here in my few attempts and always curious what i missing (even it >>> seems I already done what they asked) >>> >>> - caller id and name ( hide or display) >>> - Mwi light and VM message from PSTN and IP phone >>> - inter site call & VM inter site >>> - COR if any >>> - When forward call come , it play personal greeting >>> - DND to divert >>> - huntstop channel >>> - if agents still working >>> - after back to normal mode, verify everhthing >>> -softkeys >>> - feature : conference >>> - timeout interdigit and Cfwd timer similar to UCM mode >>> - always use preference 9 and "dial-peer hunt 2" >>> >>> Any other tips and trick that I am not aware ? help please >>> >>> K >>> >>> >>> >>> >>> - >>> >>> >>> ___ >>> For more information regarding industry leading CCIE Lab training, >>> please visit www.ipexpert.com >>> >>> Are you a CCNP or CCIE and looking for a job? Check out >>> www.PlatinumPlacement.com >>> >> >> >> ___ >> For more information regarding industry leading CCIE Lab training, please >> visit www.ipexpert.com >> >> Are you a CCNP or CCIE and looking for a job? Check out >> www.PlatinumPlacement.com >> > > ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] UCM DHCP
Hello, I am having trouble with getting phones Ip address when UCM(pub) is configured as the DHCP server. Following is partial config from the switch & the router. I have made sure - 1. Dot1q trunk on HQ-RTR interface (on the switch). Make sure that all appropriate vlans are allowed on the trunk link and that native VLAN lines up (1 is default). 2. Ensure VLANs are provisioned correctly, assigned to the right interfaces, and active (sh vlan b) 3. Double check scope config on CUCM Pub. Check each parameter. 4. Made sure helper-address is configured 5. disabled CSA service from pub 6. restarted DHCP service several times DHCP Server : 10.10.210.10 subnet IPV4 address: 10.10.200.0 primary start addr: 10.10.200.120 primary end addr : 10.10.200.130 primary router : 10.10.200.3/255.255.255.0 debug ip dhcp server events: SiteA-Switch# $ 01:58:00: DHCPD: Reload workspace interface Vlan102 tableid 0. 01:58:00: DHCPD: tableid for 10.10.200.120 on Vlan102 is 0 01:58:00: DHCPD: client's VPN is . 01:58:00: DHCPD: Finding a relay for client 0100.1bd4.c698.6c on interface Vlan102. 01:58:00: DHCPD: there is no pool for 10.10.200.120. SiteA-Switch#$ 01:58:34: DHCPD: checking for expired leases. SiteA-Switch#$ 01:59:25: DHCPD: Reload workspace interface Vlan102 tableid 0. 01:59:25: DHCPD: tableid for 10.10.200.120 on Vlan102 is 0 01:59:25: DHCPD: client's VPN is . 01:59:25: DHCPD: Finding a relay for client 0100.1bd4.c698.6c on interface Vlan102. 01:59:25: DHCPD: there is no pool for 10.10.200.120. HQ Switch:- SiteA-Switch#sh run interface FastEthernet1/0/1 description TRUNK to HQ-RTR switchport trunk encapsulation dot1q switchport mode trunk speed 100 duplex full ! interface FastEthernet1/0/2 description HQ PHONE 1- 7960 phone switchport access vlan 101 switchport mode access switchport voice vlan 102 spanning-tree portfast ! interface FastEthernet1/0/3 ! --More-- interface FastEthernet1/0/4 description SERVER port- do not change switchport access vlan 103 switchport mode access duplex half spanning-tree portfast ! interface FastEthernet1/0/23 description HQ PHONE 2- 7962 phone switchport access vlan 101 switchport mode access switchport voice vlan 102 switchport voice detect cisco-phone spanning-tree portfast ! interface FastEthernet1/0/24 description *** DO NOT CHANGE - THIS IS YOUR L3 CONNECTION TO YOUR VPN!!! *** switchport access vlan 101 switchport mode access speed 100 duplex full no cdp enable ! interface GigabitEthernet1/0/1 ! interface GigabitEthernet1/0/2 ! --More-- interface Vlan1 no ip address ! interface Vlan101 ip address 10.10.100.3 255.255.255.0 ! interface Vlan102 ip address 10.10.200.120 255.255.255.0 ! control-plane ! ! line con 0 exec-timeout 0 0 --More-- logging synchronous line vty 0 4 exec-timeout 0 0 privilege level 15 logging synchronous no login line vty 5 15 exec-timeout 0 0 privilege level 15 logging synchronous no login ! end HQ router:- interface FastEthernet0/0.101 encapsulation dot1Q 101 ip address 10.10.100.1 255.255.255.0 ! interface FastEthernet0/0.102 encapsulation dot1Q 102 ip address 10.10.200.3 255.255.255.0 ip helper-address 10.10.210.10 ! interface FastEthernet0/0.103 encapsulation dot1Q 103 ip address 10.10.210.1 255.255.255.0 ! interface FastEthernet0/1 no ip address shutdown duplex auto speed auto ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] SRST checklist
Adding one more for H323 gateways: *CUCM service Parameter : Allow Peer to Preserve H.323 Calls* * * Keep it coming guys and gals Regards, Ovidiu On Fri, Jun 21, 2013 at 11:55 AM, Somphol Boonjing wrote: > To add to your list that is already good, > > - date/time format > - timezone > - system message > - number of max calls & busy call triggers > - call pickup behavior if applicable (directed vs no directed call pickup) > - call-transfer pattern > - call-forward pattern > - number of channels for ephone (dual, octal) > - cbarge for shared line if applicable > - SRST for media resources (via sdspfarm) > - cptone if applicable > > --Somphol. > > > --Somphol > > > On Fri, Jun 21, 2013 at 3:08 PM, Karen Johnson > wrote: > >> >> all, >> >> i am trying to compile SRST check for my next attempt. I never got full >> mark here in my few attempts and always curious what i missing (even it >> seems I already done what they asked) >> >> - caller id and name ( hide or display) >> - Mwi light and VM message from PSTN and IP phone >> - inter site call & VM inter site >> - COR if any >> - When forward call come , it play personal greeting >> - DND to divert >> - huntstop channel >> - if agents still working >> - after back to normal mode, verify everhthing >> -softkeys >> - feature : conference >> - timeout interdigit and Cfwd timer similar to UCM mode >> - always use preference 9 and "dial-peer hunt 2" >> >> Any other tips and trick that I am not aware ? help please >> >> K >> >> >> >> >> - >> >> >> ___ >> For more information regarding industry leading CCIE Lab training, please >> visit www.ipexpert.com >> >> Are you a CCNP or CCIE and looking for a job? Check out >> www.PlatinumPlacement.com >> > > > ___ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com > ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] B-ACD
Hi, I am trying to Remove B-ACD configuration but still showing in the running configuration i have restarted the router but no look any guess? thanks ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] SRST checklist
To add to your list that is already good, - date/time format - timezone - system message - number of max calls & busy call triggers - call pickup behavior if applicable (directed vs no directed call pickup) - call-transfer pattern - call-forward pattern - number of channels for ephone (dual, octal) - cbarge for shared line if applicable - SRST for media resources (via sdspfarm) - cptone if applicable --Somphol. --Somphol On Fri, Jun 21, 2013 at 3:08 PM, Karen Johnson wrote: > > all, > > i am trying to compile SRST check for my next attempt. I never got full > mark here in my few attempts and always curious what i missing (even it > seems I already done what they asked) > > - caller id and name ( hide or display) > - Mwi light and VM message from PSTN and IP phone > - inter site call & VM inter site > - COR if any > - When forward call come , it play personal greeting > - DND to divert > - huntstop channel > - if agents still working > - after back to normal mode, verify everhthing > -softkeys > - feature : conference > - timeout interdigit and Cfwd timer similar to UCM mode > - always use preference 9 and "dial-peer hunt 2" > > Any other tips and trick that I am not aware ? help please > > K > > > > > - > > > ___ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com > ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] B-ACD issue
HI experts, I am trying to remove B-ACD cnofigs from the router but still show in running config,i have reloaded the router but still no luck any guess ? Thks ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com