[OSL | CCIE_Voice] selling IPX rack voucher..
guys.. i have around 17-20 ipx voice rack voucher.. if anyone want to buy please tell.. thanks ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] cuc vm issue with hq user..
guys...when i working on ipx racks... i am facing issue... i can access cuc work on it... when leave vm from pstn or end user to nay cuc user...it goes...correctly.. but on ip phones..it shows no mwi and not vm notification.. and also when i check vm..it says no vm for u... what is issue and how can i fix it? i tried 5-10 times with all config...but same results... for hq, sb all end users... please help em to fix it... -- Thanks & Regard's Amit Sharma ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] lab qos for cue to cucm..
anyone tell me if this is right or need changes? configure switch 1 with policies on the 3750 switch: 1: ensure cos value 5 is mapped to dscp ef /cue signal with cs3 2: in giga int 1/0/4, make sure all incoming cue signal traffic is amrked with cs3 and guarantee to 7k bandwidth. Anything in excess should be first amrked down to dsco value of 8 before being transmitted. 3. use requirements listed in the cue section to deliver teh list of protocols to be policed. On HQ Switch side: - mls qos map policed-dscp 24 to 8 mls qos map cos-dscp 0 8 16 24 32 46 48 56 mls qos class-map match-any SUB_TO_CUE match access-group name SUB_TO_CUE policy-map SUB_TO_CUE class SUB_TO_CUE set ip dscp cs3 police 8000 8000 exceed-action policed-dscp-transmit class class-default trust dscp ip access-list extended SUB_TO_CUE permit tcp host 142.100.64.12 eq 2748 host 142.1.66.253 permit tcp host 142.100.64.12 eq smtp host 142.1.66.253 permit tcp host 142.100.64.12 eq 443 host 142.1.66.253 permit tcp host 142.100.64.12 eq 8443 host 142.1.66.253 permit tcp host 142.100.64.12 eq www host 142.1.66.253 interface GigabitEthernet1/0/1 description R1 Trunk switchport trunk encapsulation dot1q switchport trunk allowed vlan 1,100,102,202 switchport mode trunk mls qos trust dscp spanning-tree portfast trunk interface GigabitEthernet1/0/3 description Publisher Port switchport mode access mls qos trust dscp spanning-tree portfast interface GigabitEthernet1/0/4 description Subscriber Port service-policy input SUB_TO_CUE switchport access vlan 100 switchport mode access spanning-tree portfast interface GigabitEthernet1/0/13 description *** IP Phones switchports switchport access vlan 202 switchport mode access switchport voice vlan 102 mls qos trust device cisco-phone mls qos trust cos spanning-tree portfast interface GigabitEthernet1/0/14 description *** IP Phones switchports switchport access vlan 202 switchport mode access switchport voice vlan 102 mls qos trust device cisco-phone mls qos trust cos spanning-tree portfast interface GigabitEthernet1/0/15 description *** IP Phones switchports switchport access vlan 202 switchport mode access switchport voice vlan 102 mls qos trust device cisco-phone mls qos trust cos spanning-tree portfast ! = On R3 router side: -- - ! class-map match-any cue_TO_sub match access-group name cue_TO_sub ! policy-map cue_TO_sub class cue_TO_sub set ip dscp cs3 police 8000 8000 exceed-action policed-dscp-transmit class class-default trust dscp ! ip access-list extended cue_TO_sub permit tcp host 142.1.66.253 eq 2748 host 142.100.64.12 permit tcp host 142.1.66.253 eq smtp host 142.100.64.12 permit tcp host 142.1.66.253 eq 443 host 142.100.64.12 permit tcp host 142.1.66.253 eq 8443 host 142.100.64.12 permit tcp host 142.1.66.253 eq www host 142.100.64.12 ! interface serial 0/1/0:0.1 point-to-point description serial port to HQ Router service-policy output cue_TO_sub ! -- Thanks & Regard's Amit Sharma ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] lab 5 sip + call
i am not able to connect call to pstn... is it IOS issue or my config issue/ please help me...when trying without + call working... but when aplly + called number call failes.. what could be issue? -- Thanks & Regard's Amit Sharma ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] cue register issue with ccm
guys.,, anyone help me as i am using ipx remote racks...and always issue to register cue with cucm... i am doing all config but it is not registering with cucm... please tell me how can fix it? -- Thanks & Regard's Amit Sharma ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] five hand lab 5 sip call
guys i am trying to call sip number on pstn side... but call not connecting.. getting message check the number u dialed... how can fix it/? -- Thanks & Regard's Amit Sharma ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] vm transfer with 2 key steps
how can we transfer call to vm..? setup is like this... when get call from pstn to 2001... accept call and then press transfer key...then dial *2002 that is cti route point..which forward all calls to vm.. ten i dial *2002 to transfer to vm... it plays vm and going to vm... but still call on 2001 phone... i want to move call from 2001 and it should play vm prompt on pstn phone.. i enable transfer on hook but no affect... anyone help me...! what i missed... -- Thanks & Regard's Amit Sharma ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] tfr to vm....
guys, when i accept a call from pstn phone and then transfer to vm by press shift and speed dail that is configure for VMit still showing to press transfer again but as i apply same process in SRST case...for 4001it works and call moves goes away from 40001 and it shows on pstn phone to play vm... what could be issue due to that it is not working with cucm but working with SiteC srst case? anyone help would be more appreciated! -- Thanks & Regard's Amit Sharma ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] SRST TCL not reaching vm...
can anyone tell me what is issue with this log and config? ul 31 23:43:14.446: //142//TCL :/tcl_PutsObjCmd: TCL AA: >>> Destination Huntgroup = 4888 <<< Jul 31 23:43:14.458: //35//TCL :/tcl_PutsObjCmd: TCL B-ACD: >>> THE QUEUE IS {TclModule_498EB2F0_0_3103288 {CALL_PROGRESS} {1375314194}} <<< SiteC-RTR# Jul 31 23:43:15.042: %ISDN-6-CONNECT: Interface Serial0/0/0:0 is now connected to 8522535 N/A SiteC-RTR# Jul 31 23:43:24.434: //35//TCL :/tcl_PutsObjCmd: TCL B-ACD: >>> THE QUEUE IS {TclModule_498EB2F0_0_3103288 {CALL_PROGRESS} {1375314204}} <<< Jul 31 23:43:24.434: //35//TCL :/tcl_PutsObjCmd: TCL B-ACD: >>> Received HELLO from TclModule_498EB2F0_0_3103288 <<< SiteC-RTR# Jul 31 23:43:27.130: //35//TCL :/tcl_PutsObjCmd: TCL B-ACD: >>> B-ACD Service Running <<< Jul 31 23:43:27.130: //35//TCL :/tcl_PutsObjCmd: TCL B-ACD: >>> {TclModule_498EB2F0_0_3103288 {CALL_PROGRESS} {1375314204}} <<< SiteC-RTR# Jul 31 23:43:34.434: //35//TCL :/tcl_PutsObjCmd: TCL B-ACD: >>> THE QUEUE IS {TclModule_498EB2F0_0_3103288 {CALL_PROGRESS} {1375314214}} <<< Jul 31 23:43:34.434: //35//TCL :/tcl_PutsObjCmd: TCL B-ACD: >>> Received HELLO from TclModule_498EB2F0_0_3103288 <<< Jul 31 23:43:34.502: //142//TCL :/tcl_PutsObjCmd: proc act_CallSetupDone Jul 31 23:43:34.502: Jul 31 23:43:34.502: //142//TCL :/tcl_PutsObjCmd: IP IVR Leg Setup Status = ls_002 Jul 31 23:43:34.502: Jul 31 23:43:34.506: //142//TCL :/tcl_PutsObjCmd: TCL AA: >> Agent did not answer; Received Call NOAN << Jul 31 23:43:34.510: //35//TCL :/tcl_PutsObjCmd: SiteC-RTR#TCL B-ACD: >>> THE QUEUE IS {TclModule_498EB2F0_0_3103288 {CALL_NOAN} {1375314214}} <<< SiteC-RTR# Jul 31 23:43:43.963: //142//TCL :/tcl_PutsObjCmd: TCL AA: -- MEDIA STATUS = ms_000 -- Jul 31 23:43:43.983: //142//AFW_:/AFW_FSM_Drive: Tcl_Eval to drive FSM inside Tcl modulespace. code=1 code=ERROR Jul 31 23:43:43.983: TCL script failure Result: Play Failed Jul 31 23:43:43.983:TCL script failure errorInfo: Play Failed while executing "media play leg_incoming moh:livemoh" (procedure "act_EvMediaDone" line 19) invoked from within "act_EvMediaDone" SiteC-RTR# application service app-b-acd-aa param voice-mail *4001 paramspace english index 0 param max-time-call-retry 55 param service-name app-b-acd param number-of-hunt-grps 1 param drop-through-option 1 paramspace english language en param handoff-string app-b-acd-aa param max-time-vm-retry 1 paramspace english location flash: param aa-pilot 4000 param second-greeting-time 30 param drop-through-prompt _bacd_welcome.au param call-retry-timer 10 ! service app-b-acd param queue-len 2 param aa-hunt1 4888 param queue-manager-debugs 1 param number-of-hunt-grps 1 ! dial-peer voice 4000 voip service app-b-acd-aa destination-pattern 4000 session target ipv4:142.102.66.254 incoming called-number 4000 dtmf-relay h245-alphanumeric codec g711ulaw ! dial-peer voice 4001 pots service app-b-acd-aa incoming called-number 4000 ! telephony-service moh en_bacd_music-on-hold.au ! ccm-manager music-on-hold ! ephone-hunt 1 longest-idle pilot 4888 list 4101, 4102 timeout 10, 10 auto logout 2 dynamic ! -- Thanks & Regard's Amit Sharma ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] srst of sitec cme
when go in srst...as i apply speed dail it removes ephone extension from phone but when go back to cucm from srst it comes automaticlaly... why is it happening? any solution! -- Thanks & Regard's Amit Sharma ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] SiteC SRST
Guys, when go in sitec srst all working ok... when come backto cucm phones register but vm is not working... i reload cue and cucm service restart but no affect... what could be issue and how can fix it? -- Thanks & Regard's Amit Sharma ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] issue with sip trunk with MTP
guys, i have made this setupa nd capture call logsin pstn phone when i see it is not accepting called party prefix + that i applied in roulte list... Can anyone help me why it is not taking it? my setup is like this: cucm...sip trunk with ip of PSTN GW... sip trunk amd cucm default mtp under MRG and MRG is under MRGL... then i have SIP RGthat covers SIP TRUNK.. then RLthat covers SIP RG then under RLi selected SIP TRUNk and applied called prefix + and calling number on...that is on phones.. then create route pattern : 9011.322! but when i call it shows only 322number not accepting + prefix for called number.. ? PSTN-WAN# Jul 19 23:33:35.711: //25//CCAPI/cc_api_caps_ind: Call Entry Is Not Found Jul 19 23:33:35.715: //-1/7753160E804A/CCAPI/cc_api_display_ie_subfields: cc_api_call_setup_ind_common: cisco-username=+14082022001 - ccCallInfo IE subfields - cisco-ani=14082022001 cisco-anitype=1 cisco-aniplan=1 cisco-anipi=0 cisco-anisi=1 dest=3225251234 cisco-desttype=1 cisco-destplan=1 cisco-rdie= cisco-rdn= cisco-rdntype=0 cisco-rdnplan=0 cisco-rdnpi=-1 cisco-rdnsi=-1 cisco-redirectreason=-1 fwd_final_type =0 final_redirectNumber = hunt_group_timeout =0 Jul 19 23:33:35.715: //-1/7753160E804A/CCAPI/cc_api_call_setup_ind_common: Interface=0x4854FBAC, Call Info( Calling Number=14082022001,(Calling Name=)(TON=International, NPI=ISDN, Scree ning=User, Passed, Presentation=Allowed), Called Number=3225251234(TON=International, NPI=ISDN), Calling Translated=FALSE, Subscriber Type S PSTN-WAN#tr=Unknown, FinalDestinationFlag=TRUE, Incoming Dial-peer=0, Progress Indication=NULL(0), Calling IE Present=TRUE, Source Trkgrp Route Label=, Target Trkgrp Route Label=, CLID Transparent=FALS E), Call Id=25 Jul 19 23:33:35.715: //-1//CCAPI/cc_get_feature_vsa: Jul 19 23:33:35.715: :cc_get_feature_vsa malloc success Jul 19 23:33:35.715: //-1//CCAPI/cc_get_feature_vsa: Jul 19 23:33:35.715: cc_get_feature_vsa count is 1 Jul 19 23:33:35.715: //-1//CCAPI/cc_get_feature_vsa: Jul 19 23:33:35.715: :FEATURE_VSA attributes are: feature_name:0,feature_time:11 90726336,feature_id:25 Jul 19 23:33:35.715: //25/7753160E804A/CCAPI/cc_api_call_setup_ind_common: Set Up Event Sent; Call Info(Calling Number=14082022001(TON=International, NPI=ISDN, Screening=U ser, Passed, Presentation=Allowed), Called Number=3225251234(TON=International, NPI=ISDN)) Jul 19 23:33:35.719: //25/7753160E804A/CCAPI/cc_process_call_setup_ind: Event=0x48963510 Jul 19 23:33:35.719: //25/7753160E804A/CCAPI/ccCallSetContext: Context=0x493EF1D8 Jul 19 23:33:35.719: //25/7753160E804A/CCAPI/cc_process_call_setup_ind: >>>>CCAPI handed cid 25 with tag 0 to app "_ManagedAppProcess_Default" Jul 19 23:33:35.719: //25/7753160E804A/CCAPI/ccCallProceeding: Progress Indication=NULL(0) Jul 19 23:33:35.723: //25/7753160E804A/CCAPI/ccCallDisconnect: Cause Value=1, Tag=0x0, Call Entry(Previous Disconnect Cause=0, Disconnect Ca use=0) Jul 19 23:33:35.723: //25/7753160E804A/CCAPI/ccCallDisconnect: Cause Value=1, Call Entry(Responsed=TRUE, Cause Value=1) Jul 19 23:33:35.735: //25/7753160E804A/CCAPI/cc_api_call_disconnect_done: Disposition=0, Interface=0x4854FBAC, Tag=0x0, Call Id=25, Call Entry(Disconnect Cause=1, Voice Class Cause Code=0, Retry Count=0) Jul 19 23:33:35.735: //25/7753160E804A/CCAPI/cc_api_call_disconnect_done: Call Disconnect Event Sent Jul 19 23:33:35.735: //-1//CCAPI/cc_free_feature_vsa: Jul 19 23:33:35.735: :cc_free_feature_vsa freeing 46F90AB8 Jul 19 23:33:35.735: //-1//CCAPI/cc_free_feature_vsa: Jul 19 23:33:35.735: vsacount in free is 0 PSTN-WAN# -- Thanks & Regard's Amit Sharma ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] qos for cue that coming to switch 1/4 port
guys..i have this config... mla qos mls qos mal policed-dscp 24 to 8 mls qos map cos-dscp 0 8 16 24 32 46 48 56 ip access-list extended signal permit tcp host 10.10.210.10 eq 2748 host 10.10.115.2 permit tcp host 10.10.210.11 eq 2748 host 10.10.115.2 class-map match any signal match access-group name signal policy-map cue class signal set dscp cs3 police 8000 8000 exceed action transmit dscp policed class class-default fair queue int giga1/0/4 service policy input cue exit is this config correct or need something else for complete it? we will apply mls qos trust dscp on all trunk and server ports./.. ip phone pot will sue... mls qos trust cos mls qos trust device ciscp phone// -- Thanks & Regard's Amit Sharma ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] single button login
guys, i work on single button login.,.but showing id or password wrong.. i re check and try again same issue? can someone tell me what is issue? for uccx script pint, i have done script point..but when call from pstn not working..getting busy tone... when callfrom internal phones of any site working.. what could be issue in this point? -- Thanks & Regard's Amit Sharma ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] srst call issue
guys i applied siteb-srst...but when trying call outside and inside not working.. how can fix it? i also face issue when apply one button login service on phones... when try to access service...showing requesting...? -- Thanks & Regard's Amit Sharma SiteB-RTR#sh isdn status Global ISDN Switchtype = primary-ni ISDN Serial0/0/0:23 interface dsl 0, interface ISDN Switchtype = primary-ni Layer 1 Status: ACTIVE Layer 2 Status: TEI = 0, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED Layer 3 Status: 0 Active Layer 3 Call(s) Active dsl 0 CCBs = 0 The Free Channel Mask: 0x800F Number of L2 Discards = 0, L2 Session ID = 0 Total Allocated ISDN CCBs = 0 SiteB-RTR# SiteB-RTR# SiteB-RTR#sh ephone registered ephone-1[0] Mac:000F.8FC7.BB42 TCP socket:[2] activeLine:0 REGISTERED in SCCP ver 11/9 mediaActive:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 debug:0 caps:8 privacy:1 IP:10.10.201.40 49882 Telecaster 7960 keepalive 7 max_line 6 button 1: dn 1 number 3001 CM Fallback CH1 IDLE CH2 IDLE CH3 IDLE CH4 IDLE CH5 IDLE CH6 IDLE CH7 IDLE CH8 IDLE Preferred Codec: g711ulaw SiteB-RTR# SiteB-RTR# SiteB-RTR# SiteB-RTR# SiteB-RTR# SiteB-RTR# SiteB-RTR# SiteB-RTR# SiteB-RTR# Jul 10 03:22:23.517: ISDN Se0/0/0:23 Q931: RX <- SETUP pd = 8 callref = 0x0085 Bearer Capability i = 0x8090A2 Standard = CCITT Transfer Capability = Speech Transfer Mode = Circuit Transfer Rate = 64 kbit/s Channel ID i = 0xA98381 Exclusive, Channel 1 Progress Ind i = 0x8583 - Origination address is non-ISDN Display i = 'PSTN-SITEB-PHON' Calling Party Number i = 0x4180, '525' Plan:ISDN, Type:Subscriber(local) Called Party Number i = 0xC1, '3033001' Plan:ISDN, Type:Subscriber(local) Jul 10 03:22:23.517: ISDN Se0/0/0:23 Q931: Received SETUP callref = 0x8085 callID = 0x0005 switch = primary-ni interface = User SiteB-RTR# Jul 10 03:22:23.537: ISDN Se0/0/0:23 Q931: TX -> CALL_PROC pd = 8 callref = 0x8085 Channel ID i = 0xA98381 Exclusive, Channel 1 SiteB-RTR# Jul 10 03:22:26.569: ISDN Se0/0/0:23 Q931: TX -> DISCONNECT pd = 8 callref = 0x8085 Cause i = 0x80A6 - Network out of order Jul 10 03:22:26.577: ISDN Se0/0/0:23 Q931: RX <- RELEASE pd = 8 callref = 0x0085 Cause i = 0x82E4 - Invalid information element contents Jul 10 03:22:26.581: ISDN Se0/0/0:23 Q931: TX -> RELEASE_COMP pd = 8 callref = 0x8085 SiteB-RTR# Jul 10 03:22:37.169: ISDN Se0/0/0:23 Q931: RX <- SETUP pd = 8 callref = 0x0086 Bearer Capability i = 0x8090A2 Standard = CCITT Transfer Capability = Speech Transfer Mode = Circuit Transfer Rate = 64 kbit/s Channel ID i = 0xA98381 Exclusive, Channel 1 Progress Ind i = 0x8583 - Origination address is non-ISDN Display i = 'PSTN-SITEB-PHON' Calling Party Number i = 0x4180, '525' Plan:ISDN, Type:Subscriber(local) Called Party Number i = 0x80, '97230330001' Plan:Unknown, Type:Unknown Jul 10 03:22:37.169: ISDN Se0/0/0:23 Q931: Received SETUP callref = 0x8086 callID = 0x0006 switch = primary-ni interface = User Jul 10 03:22:37.189: ISDN Se0/0/0:23 Q931: Applying typeplan for sw-type 0xD is 0x4 0x1, Calling num 525 Jul 10 03:22:37.193: ISDN Se0/0/0:23 Q931: Sending SETUP callref = 0x0082 callID = 0x8003 switch = primary-ni interface = User Jul 10 03:22:37.193: ISDN Se0/0/0:23 Q931: TX -> CALL_PROC pd = 8 callref = 0x8086 Ch SiteB-RTR#annel ID i = 0xA98381 Exclusive, Channel 1 Jul 10 03:22:37.193: ISDN Se0/0/0:23 Q931: TX -> SETUP pd = 8 callref = 0x0082 Bearer Capability i = 0x8090A2 Standard = CCITT Transfer Capability = Speech Transfer Mode = Circuit Transfer Rate = 64 kbit/s Channel ID i = 0xA98384 Exclusive, Channel 4 Progress Ind i = 0x8583 - Origination address is non-ISDN Calling Party Number i = 0x4180, '525' Plan:ISDN, Type:Subscriber(local) Called Party Number i = 0xC1, '7230330001' Plan:ISDN, Type:Subscriber(local) Jul 10 03:22:37.225: ISDN Se0/0/0:23 Q931: RX <- CALL_PROC pd = 8 callref = 0x8082 Channel ID i = 0xA98384 Exclusive, Channel 4 Jul 10 03:22:37.233: ISDN Se0/0/0:23 Q931: RX <- DISCONNECT pd = 8 callref = 0x8082 Cause i = 0x8281 - Unallocated/unassigned number Jul 10 03:22:37.233: ISDN Se0/0/0:23 Q931
[OSL | CCIE_Voice] will phoneview will show srst ip phones for site-b and site-c
Dear All, I am using proctor labs for my study... as my all connected all phones for hq, site-b and site-c showing in phoneview but when goes in srst for site-b and c i cant see phone working in phoneview... how can i fix it? what is solution to see phone in phoneview in srst case? -- Thanks & Regard's Amit Sharma ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] phoneview in SRST
did anyone use phone view with lab phones to access remotely in case of SRST? if anyone sue tell me how can use it? -- Thanks & Regard's Amit Sharma ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] how can see phones in SRST mode when using phoneview
Guys, as i am using phoneview for remote access of ip phones... when i put site-b & c router in SRST modei cant see working mode these site phones... how can i access these phonesand also verify call from these site phones...SRST mode...? i can see phone register with SRST router... but i want to see them in phoneview so that check by call from them...! can any one tell me if they did on proctor labs? -- Thanks & Regard's Amit Sharma ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] how use phoneview in srst case?
guys, can anyone tell me if using proctor labs for ccie voice study? how can use phoneview to access remote phones in srst case that we apply on site-b and site c router/ as i applied srst i lost access with these site phones... if u guys did tell me how can use those phones for call test in case of srst.../ -- Thanks & Regard's Amit Sharma ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] IPCC extension not showing in CUCM a nd also not showing rmcm user
guys, anyone using proctor lab and use this issue? iPCC extension not showing... rmcm not showing under cucm? how can fix it? -- Thanks & Regard's Amit Sharma ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] TCL applied but when calling 4000 call disconnected...
ranslate calling 13 translate called 3 ! voice translation-profile vm-redirect translate redirect-called 67 ! ! voice-card 0 dspfarm dsp services dspfarm ! ! application service app-b-acd-aa param voice-mail 4200 paramspace english index 0 param max-time-call-retry 700 param service-name callq param number-of-hunt-grps 1 param number-of-hunt-grps 1 param queue-len 10 param drop-through-option 1 paramspace english language en param handoff-string aa param max-time-vm-retry 2 param aa-hunt1 4500 paramspace english location flash: param aa-pilot 4000 param second-greeting-time 60 param drop-through-prompt _bacd_welcome.au param queue-manager-debugs 1 param call-retry-timer 15 ! ! ! ! ! -- Thanks & Regard's Amit Sharma ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] LLQ issue between HQ and BR1
uys see below config...that showing after apply config inter link goes down... how can fix it and what is issue? SiteA-RTR(config-fr-dlci)#au SiteA-RTR(config-fr-dlci)#auto qo SiteA-RTR(config-fr-dlci)#auto qos voi SiteA-RTR(config-fr-dlci)#auto qos voip tr SiteA-RTR(config-fr-dlci)#auto qos voip trust Jun 28 19:26:25.103: %OSPF-5-ADJCHG: Process 1, Nbr 10.10.101.1 on Serial0/0/1:0.1 from FULL to DOWN, Neighbor Down: Interface down or detached SiteA-RTR(config-fr-dlci)#auto qos voip trust %Creating new map-class. SiteA-RTR(config-fr-dlci)# SiteA-RTR(config-fr-dlci)# SiteA-RTR(config-fr-dlci)# SiteA-RTR(config-fr-dlci)# SiteA-RTR(config-fr-dlci)# Jun 28 19:28:05.241: %RMON-5-FALLINGTRAP: Falling trap is generated because the value of cbQosCMDropBitRate.210.9467521 has fallen below the falling-threshold value 0 SiteA-RTR(config-fr-dlci == teB-RTR(config-subif)# SiteB-RTR(config-subif)# SiteB-RTR(config-subif)#fra SiteB-RTR(config-subif)#frame-relay in SiteB-RTR(config-subif)#frame-relay int SiteB-RTR(config-subif)#frame-relay interface-dlci 101 SiteB-RTR(config-fr-dlci)# Jun 28 19:26:28.739: %OSPF-5-ADJCHG: Process 1, Nbr 10.10.100.1 on Serial0/0/1:0.1 from FULL to DOWN, Neighbor Down: Dead timer expired SiteB-RTR(config-fr-dlci)#do sh run int SiteB-RTR(config-fr-dlci)#do sh run int ser SiteB-RTR(config-fr-dlci)#do sh run int ser SiteB-RTR(config-fr-dlci)#do sh run int ser0/0/0:0.1 po SiteB-RTR(config-fr-dlci)#do sh run int ser0/0/0:0.1 po sh run int ser0/0/0:0.1 po SiteA-RTR(config-fr-dlci)#au SiteA-RTR(config-fr-dlci)#auto qo SiteA-RTR(config-fr-dlci)#auto qos voi SiteA-RTR(config-fr-dlci)#auto qos voip tr SiteA-RTR(config-fr-dlci)#auto qos voip trust Jun 28 19:26:25.103: %OSPF-5-ADJCHG: Process 1, Nbr 10.10.101.1 on Serial0/0/1:0.1 from FULL to DOWN, Neighbor Down: Interface down or detached SiteA-RTR(config-fr-dlci)#auto qos voip trust %Creating new map-class. SiteA-RTR(config-fr-dlci)# SiteA-RTR(config-fr-dlci)# SiteA-RTR(config-fr-dlci)# SiteA-RTR(config-fr-dlci)# SiteA-RTR(config-fr-dlci)# Jun 28 19:28:05.241: %RMON-5-FALLINGTRAP: Falling trap is generated because the value of cbQosCMDropBitRate.210.9467521 has fallen below the falling-threshold value 0 SiteA-RTR(config-fr-dlci On Fri, Jun 28, 2013 at 6:31 PM, Amit Sharma wrote: > guys see below config...that showing after apply config inter link goes > down... > > > how can fix it and what is issue? > > > > > > -- > Thanks & Regard's > Amit Sharma > > -- Thanks & Regard's Amit Sharma ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] LLQ issue between HQ and BR1
guys see below config...that showing after apply config inter link goes down... how can fix it and what is issue? -- Thanks & Regard's Amit Sharma ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] SRST issue
Dear guys, When i applied SRST on site-b and site-c router i cant see any ephone under router how can verify it on both routers? -- Thanks & Regard's Amit Sharma ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] guys need help for ipcc extension..
guys... really hard time... i applied config...to enable ipcc extension in cucm..\\\ http://www.cisco.com/en/US/products/sw/custcosw/ps1846/products_tech_note09186a008088cff0.shtml Cisco CallManager 5.x, ICD Extension is known as IPCC Express Extension. You can update the IPCC Express Extension on Cisco CallManager 5.x when you run the *run sql update processconfig set paramvalue="T" * * * *where paramname like ‘IAQInstalledFlag’* command in CLI mode on the publisher server. after that i restart cucm servers...when comes back server...i can ssh but not able to login cucm admin... but after that getting db error...when login on cucm... i used this link to fix it...but not working...successful.. https://supportforums.cisco.com/docs/DOC-27232 can someone tell me how fix it? -- Thanks & Regard's Amit Sharma ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] need help guys..
I am having proctor labs...' when i am working for cucm and uccx integration task.. it is already done by default for us in lab... but when check in cucm not able to see rmcm user that used in uccx ... and when i try to add ipcc extension in cucm end user...it is not having any option to add it... is it any config issue or i missed something that need to do for fix it? -- Thanks & Regard's Amit Sharma ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] cucm end user not showing ipcc extension and also not able to find rmcm in cucm
hello guys, already done cucm and uccx integration but still not able to see ipcc extension under cucm end user also not able to see rmcm user in application user how can fix it and what is issue? anyone using ipexpert solution with proctor labs please tell me how u working for this option...? how u using one button login without these options? -- Thanks & Regard's Amit Sharma ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] not able to login cupc
thanks Bill! i will check and update if it works... for cue i see that loopback 0 is haivng /32 ip so that service module not accepting ip if we use /24 ip then it will worki will test it and confirm you... thanks for all your support! On Sun, Jun 23, 2013 at 3:04 PM, Bill Lake wrote: > Run the CUPS system troubleshooter and it can be very helpful > > If that shows all good try restarting CUPS server > > Third issue is find the fix on Cisco's website at (might want to learn to > find this page) > > > http://www.cisco.com/en/US/products/sw/custcosw/ps1846/products_tech_note09186a008088cff0.shtml > > Change the parm to T so it will show up > > No routing to CUE, not configured correctly, bad password, reboot of cue, > cue being a pain, OK you get the idea, you have to eliminate each and every > reason it might not work, also sometimes just restarting CUE when you know > it is right will help. > > Post your config but usually it would look something like this (this is > from memory so please if a command is slightly off fix it) > > interface loopback 0 > ip ospf network point-to-point > > int service-engine 0/0 > ip unnumbered loopback 0 > service-module ip address 255.255.255.255 > service-module ip default-gateway > no shut > > ip route 255.255.255.255 service-engine 0/0 > > Your IP's will very as will the module type. > > Good luck > > > > On Sat, Jun 22, 2013 at 10:31 PM, Amit Sharma wrote: > >> guys. >> i am trying to login cupcbut not successful.. >> showing login issue? >> how can fix it? >> >> >> >> second i am not be able to see cucm end users in cupc for desktop >> control... >> what could be the issue? >> >> third issue is that in ccm end user i dont have option to add ipcc >> extnesion... >> how can see that option to add ipcc extension...for one button login...? >> >> >> >> fourth point is that i configure cue with loopback 1 ip but after >> config...not seen register cti port and cti route point why? >> >> if using lo 0 it is not accepting under service modulehow can use lo0 >> ipr range for service module? >> >> >> -- >> Thanks & Regard's >> Amit Sharma >> >> >> ___ >> For more information regarding industry leading CCIE Lab training, please >> visit www.ipexpert.com >> >> Are you a CCNP or CCIE and looking for a job? Check out >> www.PlatinumPlacement.com >> > > -- Thanks & Regard's Amit Sharma ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] not able to login cupc
guys. i am trying to login cupcbut not successful.. showing login issue? how can fix it? second i am not be able to see cucm end users in cupc for desktop control... what could be the issue? third issue is that in ccm end user i dont have option to add ipcc extnesion... how can see that option to add ipcc extension...for one button login...? fourth point is that i configure cue with loopback 1 ip but after config...not seen register cti port and cti route point why? if using lo 0 it is not accepting under service modulehow can use lo0 ipr range for service module? -- Thanks & Regard's Amit Sharma ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] uccx not working
Guys, when i connect to proactor labs...with initial and final configuration... most cases, uccx is not coming up... if it comes up...then try to login..and get login error... sometimes...seeing uccx account in cucm application user some time...not...seen uccx in cucm... is this pod issue or some config issue? can someone help me how can fix this issue? if i have no uccx account in cucm,..how can login in uccx? if connect with podbut cant ping uccxhow can able to wokr on it? i cant see uccx in cdp of switchthen what can i do to bring it back? -- Thanks & Regard's Amit Sharma ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] uccx integration with cucm
dear guys, what required configuration for integrate cucm with uccx..? -- Thanks & Regard's Amit Sharma ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] cti route point isnot registering
dear guys i create the cti route point,..but not registering... how can register it? -- Thanks & Regard's Amit Sharma ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] ip pblue multilab version..
Hello guys.. i have multi lab version and try to sue with cucm I want to know how can register multiple ip blue.. I have 4 loop back adapter but all showing same mac address so how can i will use for register separate phone for this ip blue? can some one help me? -- Thanks & Regard's Amit Sharma ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] how can add multiple ipblue from my pc to remote labs
Hello guys... i tried to use loop back adapter to register ipblue with remote lab but it is working for 1 phone in 1 time... can someone tell me how can i register 3 phones with remote lab? i am using phoneview...but in that i am not be able to call 1 phoen to another... can someone help me to fix it? -- Thanks & Regard's Amit Sharma ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Correct order for Directory services
when i try to use these steps my cipc showing error..when going to reset/ why is this happening and how can fix it? On Fri, Jun 7, 2013 at 1:01 PM, Randall Saborio wrote: > I mean, here: > [image: Inline image 1] > > > On Fri, Jun 7, 2013 at 3:48 AM, Randall Saborio wrote: > >> Btw, here is screenshot of my phone: >> [image: http://192.168.11.14/CGI/Screenshot] >> >> >> On Fri, Jun 7, 2013 at 3:47 AM, Randall Saborio wrote: >> >>> Hi folks (and Bill), >>> >>> Just want to check up with you, because I have tried a few times to do >>> the procedure of deleting the Directory Services and then adding them >>> again, but when I do this, the services never come up in the original order. >>> >>> Check my procedure: >>> - Delete the directory services from Phone Services page. >>> - Check the Release Notes for CUCM 7.0 and take down the queries for >>> enabling back the services: >>> Eg: >>> run sql insert into telecasterservice >>> (pkid,Name,NameASCII,Description,URLTemplate,tkPhoneService,EnterpriseSubscription,Priority) >>> values('7eca2cf1-0c8d-4df4-a807-124b18fe89a4','Corporate >>> Directory','Corporate Directory','Corporate >>> Directory','Application:Cisco/CorporateDirectory',1,'t',6) >>> >>> run sql insert into telecasterservice >>> (pkid,Name,NameASCII,Description,URLTemplate,tkPhoneService,EnterpriseSubscription,Priority) >>> values('d0059763-cdcc-4be7-a2a8-bbd4aac73f63','Missed Calls','Missed >>> Calls','Missed Calls','Application:Cisco/MissedCalls',1,'t',1) >>> >>> etc >>> >>> - Then I modify all the 't' for 'f' and paste into CLI. >>> >>> - Result is the phone that should miss some or all of the services shows >>> up correctly with missing or "No services configured". >>> >>> - However the good phone will always show the services in alphabetical >>> order, no matter what the priority is set to. >>> >>> - Followed the steps on ucguerrilla to no avail: >>> >>> http://www.ucguerrilla.com/2012/07/using-sql-to-fix-cucm-enterprise.html#more >>> >>> Any suggestions on what could I be doing wrong? Any validation that this >>> or other procedure should get the services in proper order? >>> >>> Thanks! >>> >>> >>> >>> -- >>> Randall "da ill" Saborio >>> CCIE Voice Wannabe #10054675811 >>> >> >> >> >> -- >> Randall "da ill" Saborio >> CCIE Voice Wannabe #10054675811 >> > > > > -- > Randall "da ill" Saborio > CCIE Voice Wannabe #10054675811 > > ___ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com > -- Thanks & Regard's Amit Sharma <>___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] uccx login showing unauthorized...
please help how can fix it? when i login uccx with any browser it giving unauthorized message... -- Thanks & Regard's Amit Sharma ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] can i install many phones from pc?
AS i am connected for lab over vpn and trying to register soft clients with cucm...and cme...can i use multiple phones to register? would be work if i have multiple loopback ports of network in system? i created 2 loopback of ethernet in system...each for each soft phone.. can vpn adaptor sue with cipc? please help me if anyone have idea thanks ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] lab-2of workbook-1
dear experts, which phone will work for PSTN phone? How can register x-lite, blue and cipc from my system to lab devices as per lab question needs? -- Thanks & Regard's Amit Sharma ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] lab-2a--workbook-1
Hello experts, i have some confusion... how can i register my system, cipc, x-lite and blue phone when using all labs for tests features...as doing now lab-2 then 3...4..5.till end... what phone would be pstn phone? please response as i am stuck here... -- Thanks & Regard's Amit Sharma ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] which phone be PSTN phone
dear guys, I am working on vol-1, lab-4 and 5... which one would be PSTN phone..? how can i select PSTN phone for calling internal phones? -- Thanks & Regard's Amit Sharma ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] how fix br2 router with PSTN router
i configure PSTN router ip as ntp server in BR2 router but still not showing fixed it is not showing synchronized... how can fixed it? -- Thanks & Regard's Amit Sharma ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] lab--6 new question some i found here!
HI, Is there any change in the IPCC script in lab 6 Regards, From: andrew margis To: ccie_voice@onlinestudylist.com Sent: Friday, 25 November 2011 8:13 PM Subject: [OSL | CCIE_Voice] lab--6 new question some i found here! Hi, http://www. certknowledge .com/forum/index.php?topic=39.0 (It's certknowledge(.)com/forum) I m working on early offer solution for sip. Regards ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] phone need password
yes dear,,, this is always come for sip phones please use cisco always and it is default for sip. Amit On Sat, Jun 11, 2011 at 6:16 AM, donny f wrote: > hi all, > > does any one know why , when I change PHONE setting, by press **# , it ask > for password ? > and username is "Administrator" , cause I never setup one, and this is SIP > phone > > tks > > ___ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com > -- Amit Sharma Senior IT Engineer ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com