Re: [OSL | CCIE_Voice] UNITY CONNECTION HELP[
have you set up your axl user account to the puvlisher. i think its under phonesystem or whatwver you named it then edit then you should see oprion to set it up Sent from my Galaxy S®iiimichael.se...@compucom.com wrote:I just finished burning my UC Server and setting up the Phone System and I'm getting the following error. "Failed to send message to remote AXL server. Please check error log for more details." Has someone seen this before and where is the log file? Any assistance greatly appreciated haven't seen this one yet. Michael Sears ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Out-of-band console switch recommendation?
2509 or 2513 with octo cables GregW CONFIDENTIALITY NOTICE: This email message and any attached files are intended only for the use of the individual to which this is addressed to and may contain information that is confidential, proprietary, privileged and/or exempt from disclosure under applicable law. If the reader of this message is not the intended recipient you are notified that any distribution, copying, disclosure and use of, or reliance on the contents of this transmission is strictly prohibited. If you have received this transmission in error, please notify the sender immediately by return e-mail (or email gwen...@yahoo.com) and destroy the transmission by deleting the original message attachments and all copies. From: Nara Shikamaru To: OSL Group Sent: Sunday, August 23, 2009 1:09:58 PM Subject: [OSL | CCIE_Voice] Out-of-band console switch recommendation? I'm looking for a device that will allow me to console into 7 network devices on my home network so that I can make changes to device configurations without getting locked out. Can someone recommend an inexpensive solution? -- -Shikamaru ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] uccx node manager terminated unexpectedly by NT authority
I got the same thing but suspended the vm right before it requests the reboot after the install was completed. If you install it and dont configure it with CUCM it fails, i have done this with several versions I had, but the newest version I stopped just short of configuring it in callmanager. Not knowing what I am doing when it comes to ipccx I opted to suspend the vm so when im ready to configure it in cucm I will be ready. You have just enough time to go into services and put the sql manager in manual mode then reload the box and immediatly reload the ipccx software. you have just under 4 or 5 mins to get to the install. if you fail to do so within the alloted time and dont change the sql mgr to manual it even stops during a reload of the ipccx software... This shutdown problem happend in version 5.1, 6.1 and 7.0(1) Anyone have any comments, I could be wrong but this was how I was able to get around the NT/Service shutdown message... Regards, GregW From: Stuart Geoghegan To: KatGuru ; Tanner Ezell Cc: ccie_voice@onlinestudylist.com; cisco-v...@puck.nether.net Sent: Monday, August 10, 2009 10:11:44 AM Subject: Re: [OSL | CCIE_Voice] uccx node manager terminated unexpectedly by NT authority Unfortunately, I re-installed and am having the same problem. Tanner thanks for your reply - i have managed to stop the re-boots however, every time i try to start the appadmin web page, this disables the CCX Node Manager service. KatGuru, do you have any idea what patch fixed your issue? kind regards Stuart From: KatGuru To: Stuart Geoghegan ; Tanner Ezell Cc: ccie_voice@onlinestudylist.com; cisco-v...@puck.nether.net Sent: Monday, 10 August, 2009 14:55:51 Subject: Re: [OSL | CCIE_Voice] uccx node manager terminated unexpectedly by NT authority I had the same problem. But it was OK after I reinstalled it from the scratch. I believe its something to do with the OS patch. --- On Mon, 8/10/09, Tanner Ezell wrote: > From: Tanner Ezell > Subject: Re: [OSL | CCIE_Voice] uccx node manager terminated unexpectedly by > NT authority > To: "Stuart Geoghegan" > Cc: ccie_voice@onlinestudylist.com, cisco-v...@puck.nether.net > Date: Monday, August 10, 2009, 9:48 PM > If you go to services, locate the Node > Manager, select the tab "Recovery Tab", you should > see something similar to what I have attached. Change those > to Take No Action. > > That'll prevent the reboots, however you'll still > have to investigate further why that's happening. > > > On Mon, Aug 10, 2009 at 6:32 AM, > Stuart Geoghegan > wrote: > > Hi Jeremy > > Unfortunately just this morning I had the same issue (and > it was working fine when i installed it yesterday). I am > just in the middle of re-building my VM and installing UCCX > again. I couldn't see (or the shutdown timer > didn't give me enough time to troubleshoot) any other > way of getting around this other than a re-install, > > > cheers > > Stuart > > > From: jeremy > co > To: ccie_voice@onlinestudylist.com; > cisco-v...@puck.nether.net > Sent: > Monday, 10 August, 2009 12:28:30 > Subject: [OSL > | CCIE_Voice] uccx node manager terminated unexpectedly by > NT authority > > > Hi, > Running UCCX 7.0 I faced this error. II stop > system from shutting down by "shutdown -a" but > when start the service again, it will appear in few > seconds. > > > > "uccx node manager terminated unexpectedly by NT > authority\system. " > > Any body faced this be4? > > Jeremy > > > > > > > ___ > > For more information regarding industry leading CCIE Lab > training, please visit www.ipexpert.com > > > > > > -Inline Attachment Follows- > > ___ > For more information regarding industry leading CCIE Lab > training, please visit www.ipexpert.com > ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] esx 4 settings for voice servers
I would like to offer some info... My system is a Dell T300 dual core 3ghz 6mb cache 1330-fsb just this past weekend got another 8 gig off of crucial.com and have a total of 16gb ram running. base system cost 977, aftermarket ram from crucial.com 16gb cost 480.00 verses dell charge for 16gb 2800.00 I am using nfr 7.0 and have so far found out that cups 7.0(1), 7.0(2) do not install in vmware. I was in on a recent presence lab from cisco and the instructor says 7.0(3) works and they were using vmware version 1.x dont know what kind. I have cucm 7.0(1) pub and sub running. I allocated the disk as one big file and gave it 72 gigs of room. Although the install took 28 hours to build the database it finally completed the following day. Subscriber took less than 8 hours to install. The system came with two 250gb SATA drives that are running individually and I have the win2003-64bit OS running on the first drive and all my vm's running on the second drive. I also occasionally use a 1TB ext usb drive that runs in turbo mode has about a 600mg transfer speed and runs even faster than the 7200 rpm sata drives. Cups beta 7.0.99 installed fine. I got it at the prerelease last year in the Malvern pa cisco office. CUC installed like a charm in a few hours. If you iso the disks and install it from an external usb drive they work just as well. I did that so I didn't have to keep dvd's in the Dell's only dvd drive. I have also installed but have it in STANDBY is the nfr 7.0(1) IPCCX server and its activated but I am not nearly ready to complete the install so its SUSPENDED About using esxi or vmware server. I don't know why all you guys need to run that crap... just use workstation 6.5.2 and if youi have to buy a copy its fully licensed from vmware at about 275.00 per lic. Luckily my company is a premier reseller of vmware so I get it all free. as well as the cisco stuff... Stick to basic's dont over complicate things. VMWARE workstation automatically recognizes which version of windows and linux the install program is ruuning. alway let it decide for you ... It took me about 4 weeks to build the server, limited time prior to passing the voice written exam was more important at the time. Once you get it all working be sure your server has at least two nic's this way your AD/DNS/DHCP server for your data connection goes out to your firewall... i hope you have a firewall so you can access your home lab anywhere. and the other nic gets mapped to all the voice servers... This one guy I met on this list... chikki i think his name is. is currently trying to build his meeting-place server. So far I don't think he has completed it but I am curious to hear if he does. Keep at it... one note. with IPCCX i allocated 80gb on one big file. I also built CUCMBE but found that the install needs to see at least 6gb ram, I allocated 160gb but not at once, though it is on one big file and again this is for labbing only using snapshots between configs. Also sometimes the vmware software detects that your vm is in need of defrag, i say if that occurs you should do it... it runs faster the next time around. There was also a blog on this list where one guy had his servers on for a month and the files on the hard drive were growing. I haven't seen that yet on my system. Probably because I shut it off every other day since NJ is getting so many lightening storms I can afford to loose my lab to a jolt.. One last thing put the server on a battery, vmware machines don't like to loose power ever. some of my machines have gone bye bye I hope some of this helps, I'm just starting Lab 2 today. Good Luck GregW CONFIDENTIALITY NOTICE: This email message and any attached files are intended only for the use of the individual to which this is addressed to and may contain information that is confidential, proprietary, privileged and/or exempt from disclosure under applicable law. If the reader of this message is not the intended recipient you are notified that any distribution, copying, disclosure and use of, or reliance on the contents of this transmission is strictly prohibited. If you have received this transmission in error, please notify the sender immediately by return e-mail (or email gwen...@yahoo.com) and destroy the transmission by deleting the original message attachments and all copies. From: Scott ODonnell To: Tanner Ezell Cc: OSL Group ; Mike Thompson Sent: Thursday, August 6, 2009 12:09:12 AM Subject: Re: [OSL | CCIE_Voice] esx 4 settings for voice servers Still no good, I've wasted 2 weeks time just trying to get my V3 servers setup. I consistently get the same error about a timeout and a pcNormalize.. script Any advice ? On Wed, Aug 5, 2009 at 1:30 PM, Tanner Ezell wrote: It doesn't have to be fully allocated. Some may argue against performance benefits and that may be the case, but I personally haven't noticed
Re: [OSL | CCIE_Voice] 7961G-GE - Will not accept Sip profile
you mean like this? tftp-server flash:7961GE/term61.default.loads alias term61.default.loads tftp-server flash:7961GE/apps41.8-4-3-16.sbn alias apps41.8-4-3-16.sbn tftp-server flash:7961GE/cvm41sip.8-4-3-16.sbn alias cvm41sip.8-4-3-16.sbn tftp-server flash:7961GE/cnu41.8-4-3-16.sbn alias cnu41.8-4-3-16.sbn tftp-server flash:7961GE/dsp41.8-4-3-16.sbn alias dsp41.8-4-3-16.sbn tftp-server flash:7961GE/jar41sip.8-4-3-16.sbn alias jar41sip.8-4-3-16.sbn tftp-server flash:7961GE/SIP41.8-4-4S.loads alias SIP41.8-4-4S.loads i also had it like this tftp-server flash:term61.default.loads alias term61.default.loads tftp-server flash:apps41.8-4-3-16.sbn alias apps41.8-4-3-16.sbn tftp-server flash:cvm41sip.8-4-3-16.sbn alias cvm41sip.8-4-3-16.sbn tftp-server flash:cnu41.8-4-3-16.sbn alias cnu41.8-4-3-16.sbn tftp-server flash:dsp41.8-4-3-16.sbn alias dsp41.8-4-3-16.sbn tftp-server flash:jar41sip.8-4-3-16.sbn alias jar41sip.8-4-3-16.sbn tftp-server flash:SIP41.8-4-4S.loads alias SIP41.8-4-4S.loads I will try it again GregW CONFIDENTIALITY NOTICE: This email message and any attached files are intended only for the use of the individual to which this is addressed to and may contain information that is confidential, proprietary, privileged and/or exempt from disclosure under applicable law. If the reader of this message is not the intended recipient you are notified that any distribution, copying, disclosure and use of, or reliance on the contents of this transmission is strictly prohibited. If you have received this transmission in error, please notify the sender immediately by return e-mail (or email gwen...@yahoo.com) and destroy the transmission by deleting the original message attachments and all copies. From: c george To: gwen...@yahoo.com; ccie_voice@onlinestudylist.com Sent: Wednesday, August 5, 2009 2:28:15 PM Subject: RE: [OSL | CCIE_Voice] 7961G-GE - Will not accept Sip profile no that command tftp-path flash: forget about ! trust me specifically type in the commands by doing tftp-server and the file name specified in flash trust me I went thru the exact same thing Respectfully Charles George Date: Wed, 5 Aug 2009 11:03:44 -0700 From: gwen...@yahoo.com Subject: Re: [OSL | CCIE_Voice] 7961G-GE - Will not accept Sip profile To: cisco...@hotmail.com; ccie_voice@onlinestudylist.com I have the files in flash and pointing to them ... its nuts man... the files are there, im pointing to them via voice register global and even tried telephony-service. reloaded the gatway a few times and fact reset the phone a few times. forced upgrade on voice register global cmd... gonna keep at it... GregW CONFIDENTIALITY NOTICE: This email message and any attached files are intended only for the use of the individual to which this is addressed to and may contain information that is confidential, proprietary, privileged and/or exempt from disclosure under applicable law. If the reader of this message is not the intended recipient you are notified that any distribution, copying, disclosure and use of, or reliance on the contents of this transmission is strictly prohibited. If you have received this transmission in error, please notify the sender immediately by return e-mail (or email gwen...@yahoo.com) and destroy the transmission by deleting the original message attachments and all copies. From: c george To: gwen...@yahoo.com; ccie_voice@onlinestudylist.com Sent: Wednesday, August 5, 2009 1:01:30 PM Subject: RE: [OSL | CCIE_Voice] 7961G-GE - Will not accept Sip profile I had the same issue. You did not add these files from flash. 1st do a sh flash | in 7961 ding this to see if the sip files for a 7961 is loaded in flash then add those files to the tftp-server flash: Respectfully Charles George Date: Wed, 5 Aug 2009 08:49:31 -0700 From: gwen...@yahoo.com To: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] 7961G-GE - Will not accept Sip profile I forgot to mention that debug tftp events shows its looking for term61.default.loads then fails and reboots. How can I trace where its looking for this particular file ? I did multiple factory resets over the last day and will that make it point to the SCCP file that used to be or still is in the phones firmware ? Thanks in advance From: Gwenzit To: ccie_voice@onlinestudylist.com Sent: Wednesday, August 5, 2009 11:45:09 AM Subject: 7961G-GE - Will not accept Sip profile I was able to get my 7960's to take the sip profile and thanks for all of your responses. I have a qwerky issue. The phone I have here for my v3 lab is a 7961G-GEwhich used to be connected with our UC520 Lab in the office and I borrowed it for a few ipexpert labs in my voice rack. Is there any really big difference other than the gig port
Re: [OSL | CCIE_Voice] 7961G-GE - Will not accept Sip profile
I have the files in flash and pointing to them ... its nuts man... the files are there, im pointing to them via voice register global and even tried telephony-service. reloaded the gatway a few times and fact reset the phone a few times. forced upgrade on voice register global cmd... gonna keep at it... GregW CONFIDENTIALITY NOTICE: This email message and any attached files are intended only for the use of the individual to which this is addressed to and may contain information that is confidential, proprietary, privileged and/or exempt from disclosure under applicable law. If the reader of this message is not the intended recipient you are notified that any distribution, copying, disclosure and use of, or reliance on the contents of this transmission is strictly prohibited. If you have received this transmission in error, please notify the sender immediately by return e-mail (or email gwen...@yahoo.com) and destroy the transmission by deleting the original message attachments and all copies. From: c george To: gwen...@yahoo.com; ccie_voice@onlinestudylist.com Sent: Wednesday, August 5, 2009 1:01:30 PM Subject: RE: [OSL | CCIE_Voice] 7961G-GE - Will not accept Sip profile I had the same issue. You did not add these files from flash. 1st do a sh flash | in 7961 ding this to see if the sip files for a 7961 is loaded in flash then add those files to the tftp-server flash: Respectfully Charles George Date: Wed, 5 Aug 2009 08:49:31 -0700 From: gwen...@yahoo.com To: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] 7961G-GE - Will not accept Sip profile I forgot to mention that debug tftp events shows its looking for term61.default.loads then fails and reboots. How can I trace where its looking for this particular file ? I did multiple factory resets over the last day and will that make it point to the SCCP file that used to be or still is in the phones firmware ? Thanks in advance From: Gwenzit To: ccie_voice@onlinestudylist.com Sent: Wednesday, August 5, 2009 11:45:09 AM Subject: 7961G-GE - Will not accept Sip profile I was able to get my 7960's to take the sip profile and thanks for all of your responses. I have a qwerky issue. The phone I have here for my v3 lab is a 7961G-GEwhich used to be connected with our UC520 Lab in the office and I borrowed it for a few ipexpert labs in my voice rack. Is there any really big difference other than the gig port that this phone needs to be used on a UC520 cme device. I think at this point I can not seem to get the 7961g-ge to point via the tftp-server command to any other load than "term61.default.loads" Running cme 7.0.1 Full tar file, I noticed there were no files for the 7961G-GE phone, and also noticed under the phone directory that the subdirectory 7961GE did not exisit. I created the subfolder 7961GE in the phone directory and the root directory. I have tried changing the voice register global command to this file term61.default as well as tried using a similar command under telephony-services. Any thoughts... I could paste commands but if I got it to work with the 7960's why then not this breed of phone. Any help would be appreciated, im about to quit and just move on to lab 2. GregW CONFIDENTIALITY NOTICE: This email message and any attached files are intended only for the use of the individual to which this is addressed to and may contain information that is confidential, proprietary, privileged and/or exempt from disclosure under applicable law. If the reader of this message is not the intended recipient you are notified that any distribution, copying, disclosure and use of, or reliance on the contents of this transmission is strictly prohibited. If you have received this transmission in error, please notify the sender immediately by return e-mail (or email gwen...@yahoo.com) and destroy the transmission by deleting the original message attachments and all copies. Express your personality in color! Preview and select themes for Hotmail®. Try it now. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] 7961G-GE - Will not accept Sip profile
I forgot to mention that debug tftp events shows its looking for term61.default.loads then fails and reboots. How can I trace where its looking for this particular file ? I did multiple factory resets over the last day and will that make it point to the SCCP file that used to be or still is in the phones firmware ? Thanks in advance From: Gwenzit To: ccie_voice@onlinestudylist.com Sent: Wednesday, August 5, 2009 11:45:09 AM Subject: 7961G-GE - Will not accept Sip profile I was able to get my 7960's to take the sip profile and thanks for all of your responses. I have a qwerky issue. The phone I have here for my v3 lab is a 7961G-GEwhich used to be connected with our UC520 Lab in the office and I borrowed it for a few ipexpert labs in my voice rack. Is there any really big difference other than the gig port that this phone needs to be used on a UC520 cme device. I think at this point I can not seem to get the 7961g-ge to point via the tftp-server command to any other load than "term61.default.loads" Running cme 7.0.1 Full tar file, I noticed there were no files for the 7961G-GE phone, and also noticed under the phone directory that the subdirectory 7961GE did not exisit. I created the subfolder 7961GE in the phone directory and the root directory. I have tried changing the voice register global command to this file term61.default as well as tried using a similar command under telephony-services. Any thoughts... I could paste commands but if I got it to work with the 7960's why then not this breed of phone. Any help would be appreciated, im about to quit and just move on to lab 2. GregW CONFIDENTIALITY NOTICE: This email message and any attached files are intended only for the use of the individual to which this is addressed to and may contain information that is confidential, proprietary, privileged and/or exempt from disclosure under applicable law. If the reader of this message is not the intended recipient you are notified that any distribution, copying, disclosure and use of, or reliance on the contents of this transmission is strictly prohibited. If you have received this transmission in error, please notify the sender immediately by return e-mail (or email gwen...@yahoo.com) and destroy the transmission by deleting the original message attachments and all copies. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] 7961G-GE - Will not accept Sip profile
I was able to get my 7960's to take the sip profile and thanks for all of your responses. I have a qwerky issue. The phone I have here for my v3 lab is a 7961G-GEwhich used to be connected with our UC520 Lab in the office and I borrowed it for a few ipexpert labs in my voice rack. Is there any really big difference other than the gig port that this phone needs to be used on a UC520 cme device. I think at this point I can not seem to get the 7961g-ge to point via the tftp-server command to any other load than "term61.default.loads" Running cme 7.0.1 Full tar file, I noticed there were no files for the 7961G-GE phone, and also noticed under the phone directory that the subdirectory 7961GE did not exisit. I created the subfolder 7961GE in the phone directory and the root directory. I have tried changing the voice register global command to this file term61.default as well as tried using a similar command under telephony-services. Any thoughts... I could paste commands but if I got it to work with the 7960's why then not this breed of phone. Any help would be appreciated, im about to quit and just move on to lab 2. GregW CONFIDENTIALITY NOTICE: This email message and any attached files are intended only for the use of the individual to which this is addressed to and may contain information that is confidential, proprietary, privileged and/or exempt from disclosure under applicable law. If the reader of this message is not the intended recipient you are notified that any distribution, copying, disclosure and use of, or reliance on the contents of this transmission is strictly prohibited. If you have received this transmission in error, please notify the sender immediately by return e-mail (or email gwen...@yahoo.com) and destroy the transmission by deleting the original message attachments and all copies. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] [cisco-voip] Barge or cBarge without tone?
Version 6.1 its possible to disable the barge tone. ITs in the service params somewhere. I do remember configgin it. GregW CONFIDENTIALITY NOTICE: This email message and any attached files are intended only for the use of the individual to which this is addressed to and may contain information that is confidential, proprietary, privileged and/or exempt from disclosure under applicable law. If the reader of this message is not the intended recipient you are notified that any distribution, copying, disclosure and use of, or reliance on the contents of this transmission is strictly prohibited. If you have received this transmission in error, please notify the sender immediately by return e-mail (or email gwen...@yahoo.com) and destroy the transmission by deleting the original message attachments and all copies. --- On Mon, 8/3/09, Tanner Ezell wrote: From: Tanner Ezell Subject: Re: [cisco-voip] Barge or cBarge without tone? To: "Jonathan Charles" Cc: ccie_voice@onlinestudylist.com, cisco-v...@puck.nether.net Date: Monday, August 3, 2009, 6:15 PM I don't think this is possible. On Mon, Aug 3, 2009 at 3:13 PM, Jonathan Charles wrote: Got a customer who wants to do a super secret squirrel barge on his employee thingies... He needs the tone on barge to not happen so they are not alerted to his eavesdropping... No Obvious CCM service param... Jonathan ___ cisco-voip mailing list cisco-v...@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip -Inline Attachment Follows- ___ cisco-voip mailing list cisco-v...@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Barge or cBarge without tone?
Its there keep looking. I did it for a company whose owners were paranoid and wanted to listen in on peoples conversations but beware, you have to be fast to the mute button otherwize the uninvited evesdroper will be heard by the employee. It works so well its scary... GregW CONFIDENTIALITY NOTICE: This email message and any attached files are intended only for the use of the individual to which this is addressed to and may contain information that is confidential, proprietary, privileged and/or exempt from disclosure under applicable law. If the reader of this message is not the intended recipient you are notified that any distribution, copying, disclosure and use of, or reliance on the contents of this transmission is strictly prohibited. If you have received this transmission in error, please notify the sender immediately by return e-mail (or email gwen...@yahoo.com) and destroy the transmission by deleting the original message attachments and all copies. --- On Mon, 8/3/09, Jonathan Charles wrote: From: Jonathan Charles Subject: [OSL | CCIE_Voice] Barge or cBarge without tone? To: ccie_voice@onlinestudylist.com, cisco-v...@puck.nether.net Date: Monday, August 3, 2009, 6:13 PM Got a customer who wants to do a super secret squirrel barge on his employee thingies... He needs the tone on barge to not happen so they are not alerted to his eavesdropping... No Obvious CCM service param... Jonathan ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] question regarding Appendix A switching betw sipand sccp
So does that mean the B2site is basic cme which registers with callmanager and not full cme that is its own. I've configured both for customers. not asking for the how-to but what did you end up doing to convert the phone to sip? Im guessing I have to plug the phone into my HQ sw and convert it on CUCM7.x then plug it into the cme ? Regards, GregW CONFIDENTIALITY NOTICE: This email message and any attached files are intended only for the use of the individual to which this is addressed to and may contain information that is confidential, proprietary, privileged and/or exempt from disclosure under applicable law. If the reader of this message is not the intended recipient you are notified that any distribution, copying, disclosure and use of, or reliance on the contents of this transmission is strictly prohibited. If you have received this transmission in error, please notify the sender immediately by return e-mail (or email gwen...@yahoo.com) and destroy the transmission by deleting the original message attachments and all copies. --- On Mon, 8/3/09, Aamir Panjwani wrote: From: Aamir Panjwani Subject: RE: [OSL | CCIE_Voice] question regarding Appendix A switching betw sipand sccp To: gwen...@yahoo.com, ccie_voice@onlinestudylist.com Date: Monday, August 3, 2009, 7:13 AM Yep I know it’s gotcha! I ran into this couple of months ago. Basically there is no separate firmware for CME so you need to use CUCM firmware for CME as well. From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Gwenzit Sent: Monday, 3 August 2009 9:04 PM To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] question regarding Appendix A switching betw sipand sccp I cannot seem to find the Sip firmware load P0S... page Can someone point me to the cisco.com page to download that. I do have a valid cco account I downloaded cmterm-7941_7961-sip.8-5-2.cop.sgn but this is for callmanager I need the firmware for the BR2 CME site Thanks in advance GregW CONFIDENTIALITY NOTICE: This email message and any attached files are intended only for the use of the individual to which this is addressed to and may contain information that is confidential, proprietary, privileged and/or exempt from disclosure under applicable law. If the reader of this message is not the intended recipient you are notified that any distribution, copying, disclosure and use of, or reliance on the contents of this transmission is strictly prohibited. If you have received this transmission in error, please notify the sender immediately by return e-mail (or email gwen...@yahoo.com) and destroy the transmission by deleting the original message attachments and all copies. __ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email __ __ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email __ ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] question regarding Appendix A switching betw sip and sccp
I cannot seem to find the Sip firmware load P0S... page Can someone point me to the cisco.com page to download that. I do have a valid cco account I downloaded cmterm-7941_7961-sip.8-5-2.cop.sgn but this is for callmanager I need the firmware for the BR2 CME site Thanks in advance GregW CONFIDENTIALITY NOTICE: This email message and any attached files are intended only for the use of the individual to which this is addressed to and may contain information that is confidential, proprietary, privileged and/or exempt from disclosure under applicable law. If the reader of this message is not the intended recipient you are notified that any distribution, copying, disclosure and use of, or reliance on the contents of this transmission is strictly prohibited. If you have received this transmission in error, please notify the sender immediately by return e-mail (or email gwen...@yahoo.com) and destroy the transmission by deleting the original message attachments and all copies. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] CCME 7.0 GUI....
Have you read the README.txt file that came with ccme full tar version 3. Share the phone load, ringtone, and background files by issuing the command 'tftp-server flash:xx' for each file on the flash. tftp-server flash:Desktops/320x212x12/CampusNight.png You paste the files into your config like above GregW CONFIDENTIALITY NOTICE: This email message and any attached files are intended only for the use of the individual to which this is addressed to and may contain information that is confidential, proprietary, privileged and/or exempt from disclosure under applicable law. If the reader of this message is not the intended recipient you are notified that any distribution, copying, disclosure and use of, or reliance on the contents of this transmission is strictly prohibited. If you have received this transmission in error, please notify the sender immediately by return e-mail (or email gwen...@yahoo.com) and destroy the transmission by deleting the original message attachments and all copies. --- On Sun, 8/2/09, Jonathan Charles wrote: From: Jonathan Charles Subject: [OSL | CCIE_Voice] CCME 7.0 GUI To: ccie_voice@onlinestudylist.com Date: Sunday, August 2, 2009, 10:23 AM OK, I downloaded the full ccme files and copied them to flash and set the http path to flash:\GUI However, when I go to the web page, i get X's for the menus and nothing appears to work... What am I missing? Jonathan ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] What Version ios is running on Br2 ? which cmefull or basic and which ios ?
Thanks, i just downloaded that and am upgrading my cme rtr. Greatly appreciated GregW --- On Sun, 8/2/09, Aamir Panjwani wrote: From: Aamir Panjwani Subject: RE: [OSL | CCIE_Voice] What Version ios is running on Br2 ? which cmefull or basic and which ios ? To: gwen...@yahoo.com Cc: ccie_voice@onlinestudylist.com Date: Sunday, August 2, 2009, 7:14 AM 12.4.22T From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Gwenzit Sent: Sunday, 2 August 2009 9:10 PM To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] What Version ios is running on Br2 ? which cmefull or basic and which ios ? Thanks in advance. Regards, GregW __ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email __ __ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email __ ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] What Version ios is running on Br2 ? which cme full or basic and which ios ?
Thanks in advance. Regards, GregW ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com