[OSL | CCIE_Voice] CUCM webpage timeouts (sanity insanity)
hello, Initially it was design such a way, Browser session to times out after 30 mins and user must have to re-authenticate. later an enhancement was raised and resolved in 8.6 version. so you can configure the idle timeout from CLI. http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/cli_ref/8_6_1/cli_ref_861.html#wp313461 Command syntax set webapp session timeout minutes Parameters •minutes specifies the time, in minutes, that can elapse before a web application times out and logs off the user. –Value range: 5-9 minutes –Default value: 30 minutes Thanks & Regards Nadeem Ahmed > From: ccie_voice-requ...@onlinestudylist.com > Subject: CCIE_Voice Digest, Vol 89, Issue 85 > To: ccie_voice@onlinestudylist.com > Date: Sun, 21 Jul 2013 12:00:02 -0400 > > Send CCIE_Voice mailing list submissions to > ccie_voice@onlinestudylist.com > > To subscribe or unsubscribe via the World Wide Web, visit > http://onlinestudylist.com/mailman/listinfo/ccie_voice > or, via email, send a message with subject or body 'help' to > ccie_voice-requ...@onlinestudylist.com > > You can reach the person managing the list at > ccie_voice-ow...@onlinestudylist.com > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of CCIE_Voice digest..." > > > Today's Topics: > >1. tejveersingh01 (Tejveer Singh) >2. CUCM webpage timeouts (sanity insanity) >3. DHCP troubleshooting to see what is going on (singh) >4. Webapp Timeout (Bill Lake) > > > -- > > Message: 1 > Date: Sun, 21 Jul 2013 13:38:22 +0400 > From: Tejveer Singh > To: panwarjayd...@gmail.com, ritesh_gupta1...@ymail.com, > j_pan...@yahoo.in, jitendramlk...@gmail.com, > ratnadeep.saw...@gmail.com, ccie_voice@onlinestudylist.com, > panwarjayd...@google.com, brillantp...@yahoo.co.in, > rahullakh...@gmail.com > Subject: [OSL | CCIE_Voice] tejveersingh01 > Message-ID: > > Content-Type: text/plain; charset=ISO-8859-1 > > http://hoshizaki.at/tx/aml.gcbxlzdiblkd > > > -- > > Message: 2 > Date: Sun, 21 Jul 2013 18:55:51 +0530 > From: sanity insanity > To: "ccie_voice@onlinestudylist.com" > Subject: [OSL | CCIE_Voice] CUCM webpage timeouts > Message-ID: > > Content-Type: text/plain; charset="iso-8859-1" > > Hello Guys, > > I am just wondering if I can stop webpages on the callmanger from timing > out as I have to login again and again each time in logs out. > > The 2 webpages I am interested in are :- > > CUCM admin pages > OS page on CUCM > > > -MJ > -- next part -- > An HTML attachment was scrubbed... > URL: > > -- > > Message: 3 > Date: Sun, 21 Jul 2013 19:05:35 +0530 > From: "singh" > To: > ccie_voice-requ...@onlinestudylist.com;ccie_voice@onlinestudylist.com > Subject: [OSL | CCIE_Voice] DHCP troubleshooting to see what is going > on > Message-ID: <1374413735.fa47a8afc054461b702dacbbcd204...@mail.in.com> > Content-Type: text/plain; charset="utf-8" > > Hi Guys,I am using my callmanger as the DHCP serverand using it as DHCP > server for my HQ and site B phones.Suddenly I noticed that the dhcp address > does not work on the phone.What troubleshooting or steps do I follow on my > callmanger and switch to see what is going on?singhGet Yourself a cool, short > @in.com Email ID now! > -- next part -- > An HTML attachment was scrubbed... > URL: > > -- > > Message: 4 > Date: Sun, 21 Jul 2013 09:16:07 -0500 > From: Bill Lake > To: CCIE Study > Subject: [OSL | CCIE_Voice] Webapp Timeout > Message-ID: > > Content-Type: text/plain; charset="windows-1252" > > someone asked but I did not see the email when I went to reply > set webapp session timeout > > This command sets the time, in minutes, that can elapse before a web > application, such as Cisco Unified Communications Manager Administration, > times out and logs off the user. > > For the new webapp session timeout setting to become effective, you must > restart the Cisco Tomcat service. This command prompts you to restart the > service. > -- > *Caution *Restarting the Cisco Tomcat service ends all active sessions and > can affect system performance. Cisco recommends that you only execute this > command during off-peak traffic hours. > -- &g
[OSL | CCIE_Voice] SRST connection monitor duration
once you break wan connectivity and making router fall into SRST mode, Then just press speaker button and leave them glow..that's it. it takes just few seconds to fall into SRST and register . Thanks & Regards Nadeem Ahmed Date: Thu, 18 Jul 2013 20:06:36 -0700 From: karen.johnson...@yahoo.ca Subject: Re: [OSL | CCIE_Voice] SRST connection monitor duration To: nadeem.ah...@hotmail.com; ccie_voice@onlinestudylist.com you mean by pressing Speaker will faster process ? i tried did not help,? From: Nadeem Ahmed To: "ccie_voice@onlinestudylist.com" Sent: Thursday, July 18, 2013 4:06:02 PM Subject: [OSL | CCIE_Voice] SRST connection monitor duration Hello Karen, Connection monitor you can set it to 30, however if you need speed up the SRST testing, you can press(on) the speaker button of all the phones which is falling ...SRST. this take few secs to fall from normal to SRST mode. You can test this and let me know if this help. Thanks & Regards Nadeem Ahmed > From: ccie_voice-requ...@onlinestudylist.com > Subject: CCIE_Voice Digest, Vol 89, Issue 76 > To: ccie_voice@onlinestudylist.com > Date: Wed, 17 Jul 2013 21:39:04 -0400 > > Send CCIE_Voice mailing list submissions to > ccie_voice@onlinestudylist.com > > To subscribe or unsubscribe via the World Wide Web, visit > http://onlinestudylist.com/mailman/listinfo/ccie_voice > or, via email, send a message with subject or body 'help' to > ccie_voice-requ...@onlinestudylist.com > > You can reach the person managing the list at > ccie_voice-ow...@onlinestudylist.com > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of CCIE_Voice digest..." > > > Today's Topics: > > 1. SRST connection monitor duration (Karen Johnson) > 2. IPPM service failed (Karen Johnson) > 3. Re: IPPM service failed (Randall Crumm) > 4. CUE in srst mode (IE Target) > 5. 7960 CUCM SIP Registration (Alex Pishko) > 6. Re: 7960 CUCM SIP Registration (Brian Valentine) > > > -- > > Message: 1 > Date: Wed, 17 Jul 2013 15:37:25 -0700 (PDT) > From: Karen Johnson > To: "ccie_voice@onlinestudylist.com" > Subject: [OSL | CCIE_Voice] SRST connection monitor duration > Message-ID: > <1374100645.53489.yahoomail...@web163903.mail.gq1.yahoo.com> > Content-Type: text/plain; charset="iso-8859-1" > > all, > > > if we need to speed up srst testing (switchback between normal and srst).? > > - how low can we change "Connection Monitor duration" in Device Pool > - is there any other better way or IOS command ? > > K > -- next part -- > An HTML attachment was scrubbed... > URL: > > -- > > Message: 2 > Date: Wed, 17 Jul 2013 16:40:42 -0700 (PDT) > From: Karen Johnson > To: "ccie_voice@onlinestudylist.com" > Subject: [OSL | CCIE_Voice] IPPM service failed > Message-ID: > <1374104442.7798.yahoomail...@web163905.mail.gq1.yahoo.com> > Content-Type: text/plain; charset="iso-8859-1" > > folks, > ? > i got strange issue in my IPPM service. > ? > I verified using "System troubleshoot" in CUPS all looks good and i have > config as per cisco doc. Also the url is verified correct. > ? > - When i?press IPPM service ?thru phone at HQ and SB sites, it gave me error: > ?? "You were trying to access IP Phone Messenger service from a device not > provision on Cisco call manager server " > ? > - However when I press IPPM service? using SC sites phones, it prompt me for > ?PIN : > ? Just after?I input PIN information, it gave me error : > ? > "Login failed . The user is NOT assigned or is trying to login to a node that > is not his/her home node. Please Assign the user or select IPPM service that > run on home node. > ? > any ideas what is wrong ? > ? > K > -- next part -- > An HTML attachment was scrubbed... > URL: > > -- > > Message: 3 > Date: Wed, 17 Jul 2013 17:34:48 -0700 > From: Randall Crumm > To: Karen Johnson > Cc: "ccie_voice@onlinestudylist.com" > Subject: Re: [OSL | CCIE_Voice] IPPM service failed > Message-ID: <2f1bf36c-889d-44ea-93ed-9d46c97fd...@yahoo.com> > Content-Type: text/plain; charset="us-ascii" > > Does the user have CTI control over all the phones? > > On Jul 17, 2013, at 4:40 PM, Karen Johnson wrote: > > > folks, > > > > i got strange issue in my IPPM service. > > > > I verified using "System troubleshoot" in CUPS a
[OSL | CCIE_Voice] SRST connection monitor duration
Hello Karen, Connection monitor you can set it to 30, however if you need speed up the SRST testing, you can press(on) the speaker button of all the phones which is falling ...SRST. this take few secs to fall from normal to SRST mode. You can test this and let me know if this help. Thanks & Regards Nadeem Ahmed > From: ccie_voice-requ...@onlinestudylist.com > Subject: CCIE_Voice Digest, Vol 89, Issue 76 > To: ccie_voice@onlinestudylist.com > Date: Wed, 17 Jul 2013 21:39:04 -0400 > > Send CCIE_Voice mailing list submissions to > ccie_voice@onlinestudylist.com > > To subscribe or unsubscribe via the World Wide Web, visit > http://onlinestudylist.com/mailman/listinfo/ccie_voice > or, via email, send a message with subject or body 'help' to > ccie_voice-requ...@onlinestudylist.com > > You can reach the person managing the list at > ccie_voice-ow...@onlinestudylist.com > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of CCIE_Voice digest..." > > > Today's Topics: > >1. SRST connection monitor duration (Karen Johnson) >2. IPPM service failed (Karen Johnson) >3. Re: IPPM service failed (Randall Crumm) >4. CUE in srst mode (IE Target) >5. 7960 CUCM SIP Registration (Alex Pishko) >6. Re: 7960 CUCM SIP Registration (Brian Valentine) > > > -- > > Message: 1 > Date: Wed, 17 Jul 2013 15:37:25 -0700 (PDT) > From: Karen Johnson > To: "ccie_voice@onlinestudylist.com" > Subject: [OSL | CCIE_Voice] SRST connection monitor duration > Message-ID: > <1374100645.53489.yahoomail...@web163903.mail.gq1.yahoo.com> > Content-Type: text/plain; charset="iso-8859-1" > > all, > > > if we need to speed up srst testing (switchback between normal and srst).? > > - how low can we change "Connection Monitor duration" in Device Pool > - is there any other better way or IOS command ? > > K > -- next part -- > An HTML attachment was scrubbed... > URL: > > -- > > Message: 2 > Date: Wed, 17 Jul 2013 16:40:42 -0700 (PDT) > From: Karen Johnson > To: "ccie_voice@onlinestudylist.com" > Subject: [OSL | CCIE_Voice] IPPM service failed > Message-ID: > <1374104442.7798.yahoomail...@web163905.mail.gq1.yahoo.com> > Content-Type: text/plain; charset="iso-8859-1" > > folks, > ? > i got strange issue in my IPPM service. > ? > I verified using "System troubleshoot" in CUPS all looks good and i have > config as per cisco doc. Also the url is verified correct. > ? > - When i?press IPPM service ?thru phone at HQ and SB sites, it gave me error: > ?? "You were trying to access IP Phone Messenger service from a device not > provision on Cisco call manager server " > ? > - However when I press IPPM service? using SC sites phones, it prompt me for > ?PIN : > ? Just after?I input PIN information, it gave me error : > ? > "Login failed . The user is NOT assigned or is trying to login to a node that > is not his/her home node. Please Assign the user or select IPPM service that > run on home node. > ? > any ideas what is wrong ? > ? > K > -- next part -- > An HTML attachment was scrubbed... > URL: > > -- > > Message: 3 > Date: Wed, 17 Jul 2013 17:34:48 -0700 > From: Randall Crumm > To: Karen Johnson > Cc: "ccie_voice@onlinestudylist.com" > Subject: Re: [OSL | CCIE_Voice] IPPM service failed > Message-ID: <2f1bf36c-889d-44ea-93ed-9d46c97fd...@yahoo.com> > Content-Type: text/plain; charset="us-ascii" > > Does the user have CTI control over all the phones? > > On Jul 17, 2013, at 4:40 PM, Karen Johnson wrote: > > > folks, > > > > i got strange issue in my IPPM service. > > > > I verified using "System troubleshoot" in CUPS all looks good and i have > > config as per cisco doc. Also the url is verified correct. > > > > - When i press IPPM service thru phone at HQ and SB sites, it gave me > > error: > >"You were trying to access IP Phone Messenger service from a device not > > provision on Cisco call manager server " > > > > - However when I press IPPM service using SC sites phones, it prompt me > > for PIN : > > Just after I input PIN information, it gave me error : > > > > "Login failed . The user is NOT assigned or is trying to login to a node &g
Re: [OSL | CCIE_Voice] CUE QOS
You can use below IP access-list extended cisco.com permit tcp host eq 2748(port) host CUE permit tcp host eq 2748(port) host CUE Thanks & Regards Nadeem Ahmed > From: ccie_voice-requ...@onlinestudylist.com > Subject: CCIE_Voice Digest, Vol 88, Issue 51 > To: ccie_voice@onlinestudylist.com > Date: Fri, 7 Jun 2013 19:50:27 -0400 > > Send CCIE_Voice mailing list submissions to > ccie_voice@onlinestudylist.com > > To subscribe or unsubscribe via the World Wide Web, visit > http://onlinestudylist.com/mailman/listinfo/ccie_voice > or, via email, send a message with subject or body 'help' to > ccie_voice-requ...@onlinestudylist.com > > You can reach the person managing the list at > ccie_voice-ow...@onlinestudylist.com > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of CCIE_Voice digest..." > > > Today's Topics: > >1. CUE QOS (ccie2k12) >2. Re: UCCX prompt recording. (Gurpreet Singh Kukreja) >3. Re: Correct order for Directory services (Somphol Boonjing) > > > -- > > Message: 1 > Date: Sat, 8 Jun 2013 00:44:40 +0500 > From: "ccie2k12" > To: > Subject: [OSL | CCIE_Voice] CUE QOS > Message-ID: <029f01ce63b7$74d3ddd0$5e7b9970$@com> > Content-Type: text/plain; charset="us-ascii" > > while doing QOS marking for cue > > shall we use specefic IPs from PUB & SUB > > or just putting the service policy on interface connected to vmware > > can have any any eq 2748 > > > > like below? > > > > > > ip access-list extended cue > permit tcp any any eq 2748 > permit tcp any eq 2748 any > > or > > ip access-list extended cue > permit tcp CUCMIP cueIP eq 2748 > permit tcp CUCMIP eq 2748 cueIP > > ofcourse CUCMIP and CUEIP would be real IPs of CUE and CUCM. > > -- next part -- > An HTML attachment was scrubbed... > URL: > > -- > > Message: 2 > Date: Fri, 7 Jun 2013 16:52:33 -0400 > From: Gurpreet Singh Kukreja > To: Drake J > Cc: "ccie_voice@onlinestudylist.com" > Subject: Re: [OSL | CCIE_Voice] UCCX prompt recording. > Message-ID: > > Content-Type: text/plain; charset="iso-8859-1" > > Hi Drake, > > What is the version of CCX? > > It's "C:\Program Files\wfavvid\temp" in 7.x by default and usually "en_US" > using an upload prompt step in 8.x. > > - Gurpreet > > > On Fri, Jun 7, 2013 at 12:28 PM, Drake J wrote: > > > Hello Guys, > > > > I have a few questions on UCCX script for recording a prompt > > > > 1) How do I find out where my recorded prompt is being stored for a > > recording script I create? > > > > > > 2) If I am using spoken name upload and then using the Upload prompt ( > > step) just before the terminate step in the script then how do find where > > my recording has been stored? > > > > > > Many times in question ( 2) I can hear my recorded prompt . But when I > > search for it I don't find it. > > I checked the wfavvid folder as well and prompts section. > > > > Can someone help me out with the above 2 questions? > > > > Regards, > > Drake > > > > ___ > > For more information regarding industry leading CCIE Lab training, please > > visit www.ipexpert.com > > > > Are you a CCNP or CCIE and looking for a job? Check out > > www.PlatinumPlacement.com > > > -- next part -- > An HTML attachment was scrubbed... > URL: > > -- > > Message: 3 > Date: Sat, 8 Jun 2013 09:50:04 +1000 > From: Somphol Boonjing > To: Randall Saborio > Cc: "ccie_voice@onlinestudylist.com" > Subject: Re: [OSL | CCIE_Voice] Correct order for Directory services > Message-ID: > > Content-Type: text/plain; charset="iso-8859-1" > > I love the detail step that Bill outlined above.+1 for that. > > The other day I remember seeing someone mentioned something about accessing > TFTP files on CUCM using http URL. I think that is precious. > > So, the 'directory.xml' (or 'deny.xml') potentially can be hosted on the > CUCM TFTP server itself. (I haven't tested that yet though) > > I think the URL is at the port 6970. (I memorize it as an adjacent number > "69" and "70"). > >
[OSL | CCIE_Voice] FTP from CUE failed
Hello Karen, There could be multiple issue, but seems like routing issue to me. 1) first check the connectivity, try ping from CUE to your FTP server IP and vice versa? 2) Path is shared (where license is there) on FTP server. 3) re-verify the username and password or create a new one, and shared the path where there is license file . 4) assign privileges to this users for files and directories ( like read, write etc..) on user setting on FTP server. Thanks & Regards Nadeem Ahmed > From: ccie_voice-requ...@onlinestudylist.com > Subject: CCIE_Voice Digest, Vol 88, Issue 24 > To: ccie_voice@onlinestudylist.com > Date: Tue, 4 Jun 2013 13:41:14 -0400 > > Send CCIE_Voice mailing list submissions to > ccie_voice@onlinestudylist.com > > To subscribe or unsubscribe via the World Wide Web, visit > http://onlinestudylist.com/mailman/listinfo/ccie_voice > or, via email, send a message with subject or body 'help' to > ccie_voice-requ...@onlinestudylist.com > > You can reach the person managing the list at > ccie_voice-ow...@onlinestudylist.com > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of CCIE_Voice digest..." > > > Today's Topics: > >1. Re: FTP from CUE failed (Barrera, Hugo) >2. Re: FTP from CUE failed (Dane Warner) >3. Re: FTP from CUE failed (Bill Lake) > > > -- > > Message: 1 > Date: Tue, 4 Jun 2013 17:25:41 + > From: "Barrera, Hugo" > To: Karen Johnson > Cc: "ccie_voice@onlinestudylist.com" > Subject: Re: [OSL | CCIE_Voice] FTP from CUE failed > Message-ID: > Content-Type: text/plain; charset="us-ascii" > > Is your loopback address routing? You might have to add the ip ospf network > point to point command. > > Regards, > Hugo > > > > On Jun 4, 2013, at 10:21 AM, "Karen Johnson" > mailto:karen.johnson...@yahoo.ca>> wrote: > > hi all, > > When i try to install license from FTP to CUE, it failed and gave me error > message : > > "Download error, Can not download cue-vm-license_12mbx_7.0.1.pkg error code 0 > error type 'couldn't connect to host" > > - I have verified the FTP server (Filezilla server) is working using > Filezilla client . > - username and password is correct > - File license is valid > > What possibility here? > > tks > K > ___ > For more information regarding industry leading CCIE Lab training, please > visit <http://www.ipexpert.com> www.ipexpert.com<http://www.ipexpert.com> > > Are you a CCNP or CCIE and looking for a job? Check out > <http://www.PlatinumPlacement.com> > www.PlatinumPlacement.com<http://www.PlatinumPlacement.com> > -- next part -- > An HTML attachment was scrubbed... > URL: > > -- > > Message: 2 > Date: Tue, 4 Jun 2013 13:29:14 -0400 > From: Dane Warner > To: Karen Johnson , > "ccie_voice@onlinestudylist.com" > Subject: Re: [OSL | CCIE_Voice] FTP from CUE failed > Message-ID: > <839DE40FFC6A1443A1376AC8917475B02914CCCD55@EXMBX01.connectwise.hosted> > > Content-Type: text/plain; charset="us-ascii" > > Make sure you have an IP route to the CUE module IP Address from all your > routers and servers. > > You need to make sure the Loopback interface you're using for your > Service-Module is part of OSPF. > > The CUE module address has to be pingable from everywhere. Example: > > "Ip route 10.10.115.2 255.255.255.255 Service-Engine 0/0" on your CUE router. > > Regards, > > > Dane Warner, CCVP > Sr. Network Engineer > Epoch Universal, Inc. > (909)226-0755 > dwar...@epochuniversal.com<mailto:dwar...@epochuniversal.com> > [cid:image001.png@01CE610E.3D356930] > > From: ccie_voice-boun...@onlinestudylist.com > [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Karen Johnson > Sent: Tuesday, June 04, 2013 9:42 AM > To: ccie_voice@onlinestudylist.com > Subject: [OSL | CCIE_Voice] FTP from CUE failed > > hi all, > > When i try to install license from FTP to CUE, it failed and gave me error > message : > > "Download error, Can not download cue-vm-license_12mbx_7.0.1.pkg error code 0 > error type 'couldn't connect to host" > > - I have verified the FTP server (Filezilla server) is working using > Filezilla client . > - username and password is correct > - File license is valid > &
Re: [OSL | CCIE_Voice] uccx login showing unauthorized...
Hello Amit, You can use below reference link in order to fix this issue In this case, apply this workaround: 2) - Start > Run > cet.bat. - At the warning message click “No” - In the list of Configuration Object Types, select “com.cisco.crs.cluster.config.AppAdminSetupConfig” - In the right pane, select the one record that appears, right click and select “Modify” - In the dialog window that appears, select tab “com.cisco.crs.cluster.config.AppAdminSetupConfig” - The field “Setup State” is set to “DONE”. Change it to “FRESH_INSTALL”. Click “Apply” & “OK” - Desktop > Services icon. - Restart service “Cisco Unified CCX Node Manager” - Open a new appadmin page and login with the initial credentials (Administrator – ciscocisco) - You are now in the initial setup wizard again. Navigate through the pages. Your previous configuration should still be in place. - When you are asked for the licenses enter the same license file again. - In the last page you can select admin users again. Select new admin users from the list of CM End users. - Finish the wizard. Now login again with the new admin user! All other configuration has been preserved. Hope this help. Regards Nadeem Ahmed Thanks & Regards Nadeem Ahmed > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of CCIE_Voice digest..." > > > Today's Topics: > >1. uccx login showing unauthorized... (Amit Sharma) >2. Re: DHCP static mapping (Karen Johnson) >3. Re: CCIE Collaboration officially announced (Vic) > > > -- > > Message: 1 > Date: Fri, 31 May 2013 17:31:00 +0300 > From: Amit Sharma > To: ccie_voice@onlinestudylist.com > Subject: [OSL | CCIE_Voice] uccx login showing unauthorized... > Message-ID: > > Content-Type: text/plain; charset="iso-8859-1" > > please help how can fix it? > when i login uccx with any browser it giving unauthorized message... > > > -- > Thanks & Regard's > Amit Sharma > -- next part -- > An HTML attachment was scrubbed... > URL: > > -- > > Message: 2 > Date: Fri, 31 May 2013 08:03:04 -0700 (PDT) > From: Karen Johnson > To: Abdullin Kamil > Cc: "ccie_voice@onlinestudylist.com" > Subject: Re: [OSL | CCIE_Voice] DHCP static mapping > Message-ID: <1370012584.800.yahoomail...@web163903.mail.gq1.yahoo.com> > Content-Type: text/plain; charset="utf-8" > > hi Abdul, > ? > do you mean Cisco doc is wrong ? but I am not surprise. > ? > - So we do not need? "." for MAC and also need add VRF > - where to get this guideline/doc in exam?? > ? > Here is Cisco doc > --*time* Jan 21 2005 03:52 PM > *version* 2 > !IP addressTypeHardware address Lease expiration > 10.0.0.4 /24 1 0090.bff6.081e Infinite > 10.0.0.5 /28 id 00b7.0813.88f1.66Infinite > 10.0.0.2 /21 1 0090.bff6.081d Infinite > *end* > ? > Yours > -- > *time* Feb 24 2012 05:36 AM > *version* 4? > !IP address ? ? Type ?Hardware address ? Lease expiration ? ? ? VRF > 142.102.64.11 /24 id?010022a02e4d53??Infinity!IP address ? ? Interface-name > ?Lease expiration ? ? ?Server IP address ?Hardware address ?Vrf > *end* > > > > From: Abdullin Kamil > To: Karen Johnson > Cc: "ccie_voice@onlinestudylist.com" > Sent: Friday, May 31, 2013 1:00:49 AM > Subject: Re: [OSL | CCIE_Voice] DHCP static mapping > > > > Change your file "scvlan.txt" on this: > > > *time* Feb 24 2012 05:36 AM > *version* 4? > !IP address ? ? Type ?Hardware address ? Lease expiration ? ? ? VRF > 142.102.64.11 /24 id?010022a02e4d53??Infinity!IP address ? ? Interface-name > ?Lease expiration ? ? ?Server IP address ?Hardware address ?Vrf > *end* > > and reset dhcp service > > > > 2013/5/31 Karen Johnson > > hi all, > >? > >i config DHCP using static mapping in the SWITCH. However the phone do not > >get the ip address > >? > >ip dhcp pool scpool1 > >?? origin file flash:scvlan.txt > >?? default-router 142.102.66.253 > >?? option 150 ip 142.100.64.12 142.100.64.11 > >? > >any idea ? > >? > >- > >- Debug dhcp packet : DHCPD: there is no address pool for? 142.102.66.253 > >? > >-DHCPD: DHCPDISCOVER received from client 0100.22a0.2e4d.53 through relay > >142.102.66.253. > >May 31 07:35:06.806: DHCPD: using received relay info. > >May 31 07:35:06.
