Re: [OSL | CCIE_Voice] Strange CUCM Problem
Yes well, what I did was. Utils dbreplciation stop (SUB and PUB) Utils dbreplication forcedsynchsub all Then it worked. Thanks for the reply, Octavian From: Daniel Gómez [mailto:danie...@gmail.com] Sent: Friday, August 24, 2012 8:02 PM To: Octavian Dumitrescu Cc: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] Strange CUCM Problem Hello Octavian, I had a similar case where using SUB as first option on the CMG for the phones would cause unexpected behaviour... Database appeared OK but something was going on. Sometimes phones couldn't even call to the PSTN. I performed: utils dbreplication repair (sub and pub) utils dbreplication dropadmindb (sub and pub) utils dbreplication reset all And it worked fine again. I also saw the same behaviour with a real deployment in my company, using PUB and SUB on a UCS. We applied the same procedure and issue was solved. I was wondering if it could be a bug. CUCM version in both cases was 8.6. Regards. Daniel Gomez 2012/8/24 Octavian Dumitrescu octavian.dumitre...@datanets.romailto:octavian.dumitre...@datanets.ro Hello, So I have the subscriber as primary CPE in the CMgroup and this group, being the only one, is assigned to all devices. I have configured AAR between HQ and branch2. CAC is configured using rsvp. when I dial from HQ to branch2 it says Not enough bandwidth - reorder tone. All other calls to pSTN work ok. You might say that AAR is not enabled but everything is configured corectly. If I stop Call Manager Service on SUB then all devices fall back to PUB and AAR call works. Network congestion rerouting and then BR2 phone rings via PSTN. In other words if SUB is primary CPE - AAR is not invoked and if PUB is primary CPE - AAR works ok. I can say that there is no DB replication problem: Server Number of Replicates Created Replicate_State 192.168.100.168 412 2 - good 192.168.100.169 412 2 - good Any ideas? I just think it's a stupid CUCM on VMWare installation kind of problem. Thanks! __ Information from ESET NOD32 Antivirus, version of virus signature database 7399 (20120819) __ The message was checked by ESET NOD32 Antivirus. http://www.eset.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.comhttp://www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.comhttp://www.PlatinumPlacement.com -- Daniel Gómez Quijada danie...@gmail.commailto:danie...@gmail.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] Strange CUCM Problem
Hello, So I have the subscriber as primary CPE in the CMgroup and this group, being the only one, is assigned to all devices. I have configured AAR between HQ and branch2. CAC is configured using rsvp. when I dial from HQ to branch2 it says Not enough bandwidth - reorder tone. All other calls to pSTN work ok. You might say that AAR is not enabled but everything is configured corectly. If I stop Call Manager Service on SUB then all devices fall back to PUB and AAR call works. Network congestion rerouting and then BR2 phone rings via PSTN. In other words if SUB is primary CPE - AAR is not invoked and if PUB is primary CPE - AAR works ok. I can say that there is no DB replication problem: Server Number of Replicates Created Replicate_State 192.168.100.168 412 2 - good 192.168.100.169 412 2 - good Any ideas? I just think it's a stupid CUCM on VMWare installation kind of problem. Thanks! ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] # at the end
Make a another route pattern without the # You will wait for the interdigit timeout but it shoudl work. From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of datucha123 datucha123 Sent: Friday, November 25, 2011 2:40 PM To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] # at the end Hello, I have a Route Pattern like - 9.011!# for international calls. When the international call comes to CUCM, I am using the Normalization Rules (somethimes Translation Pattern) to add the 9011 to calling party, so that it will be possible to dial back from the Missed/Received Calls. But the callback from the Missed/Received calls does not work until I remove the # from the end of the Route pattern. So how to force CUCM to add the # at the end of the Calling Party Number, so that it will be possible to callback? ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] 2651xm and MGCP gateway - help required
Maybe you've already done this but, I would try deleting and readding the GW in CUCM. Octavian From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of steven moran Sent: Wednesday, July 20, 2011 11:13 AM To: amit batra; ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] 2651xm and MGCP gateway - help required Yes I am, however if is remove the mgcp bind control/media source interface Loopabck 0 command and restrat mgcp - I see that ip address in the CUCM interface changes as expected to the nearest interface - serial int 10.10.111.2 but the device still shows as unregistered whereas the sh ccm shows it as registered. -this status persistes even if I restart the ris data collextor and CM service Best regards, Steve On Wed, Jul 20, 2011 at 6:09 PM, amit batra batraji...@yahoo.com wrote: Hi Steven are you using loopback as source of MGCP packets ?? _ From: steven moran smoran...@gmail.com To: ccie_voice@onlinestudylist.com Sent: Wednesday, July 20, 2011 5:52 PM Subject: [OSL | CCIE_Voice] 2651xm and MGCP gateway - help required Dear all, I posted this a couple of days ago and have tried all of the suggestions and many more from trawling the websites and still I cannot pinpoint the issue. In brief, this is part of the IPExpets vol1 ex 4 I have a vwic-2mft-e1 in my 2651 running (C2600-ADVENTERPRISEK9_IVS-M), Version 12.4(15)T14, RELEASE SOFTWARE (fc2) sh ccm shows that the MGCP gateway is registered, however it does not show as registered in the CUCM 7.02 interface sh isdn stat - shows no problem sh controller E1 shows no recent issues for line code, path code or slips sh network-clocks shows the E1 0/1 as priority 1 the E1 clock source is set to line (with the PSTN-WAN switch set to internal) Does anyone know how to configure a 2651xm for MGCP using E1 card The ccie voice that sold me the equipment assured me all would work - (Unfortunately for me he is now travelling in remote parts and uncontactable). I have his config and mine is the same, however I do not have the CUCM 7 that he used - are there any advanced parameters in CUCM 7 needed to make this work? Best regards, Steve ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com http://www.ipexpert.com/ Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://www.platinumplacement.com/ ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] CCX 7.0.2 and CUCM 7.1.5 JTAPI issue Client issue
What component of CCX Engine is in partial service? From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Thomas Koch Sent: Friday, July 08, 2011 12:33 AM To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] CCX 7.0.2 and CUCM 7.1.5 JTAPI issue Client issue Team, Anyone have any issues with CCX 7.0.2 and CUCM 7.1.5? I’m having JTAPI issues..the matrix from Cisco says it should work…no joy…The CCX Engine is in partial service.. Thoughts? Thomas Koch Owner/Consultant CCDA, CCNA, CCNP Voice Cisco IPT Design Specalist Digitones, LLC Cell: +1.630.235.4309 E-mail: mailto:digito...@comcast.net digito...@comcast.net ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com