Hi, May I know for the CCIE Voice Lab which SRND version is used? Cheers
From: [EMAIL PROTECTED]: [EMAIL PROTECTED]: Thu, 10 Jul 2008 08:20:11 -0400CC: [EMAIL PROTECTED]: Re: [OSL | CCIE_Voice] 0 Conf max sessionsThank you Mike. On Jul 9, 2008, at 11:29 PM, Mike Stevenson wrote: As was mentioned.. a PVDM2-16 contains 1 DSP, when a DSP is configured as a Conference Bridge, the rtr loads the required firmware into the DSP. A DSP that has been configured as a Conference Bridge, cannot also be used as a transcoder or terminate PSTN calls. from the config profile 1 is conf-b, profile 2 is xcoder. both cannot run on the same DSP, for this config to work you would either require a PVDM2-32 (this contains 2 DSPs) or greater, or or the existing PVDM2-16, and another PVDM2-(8 or 16 or more) PVDM2-8 = .5 DSP PVDM2-16 = 1 DSP PVDM2-32 = 2 DSP etc.. This is all covered in the CCM SRND. Cheers On 10/07/2008, at 12:56 PM, Michael Thompson wrote: Onur, just curious where this ended up. On Mon, Jul 7, 2008 at 4:36 PM, Jonathan Charles <[EMAIL PROTECTED]> wrote: Post a show diag, I think your DSPs may be hosed... prob badfirmware.... but this is a WAGJonathan On Mon, Jul 7, 2008 at 9:41 AM, Onur Tufekci <[EMAIL PROTECTED]> wrote:> And this is if I do it other way around:>> router2(config-dspfarm-profile)#dspfarm profile 2> router2(config-dspfarm-profile)#shut> Disabling profile will disconnect active TRANSCODING calls,> do you want to continue ? [yes/no]y> router2(config-dspfarm-profile)#> router2(config-dspfarm-profile)#> router2(config-dspfarm-profile)#dspfarm profile 1> router2(config-dspfarm-profile)#no shut> router2(config-dspfarm-profile)#dspfarm profile 2> router2(config-dspfarm-profile)#no shut> Enabling profile failed due to insufficient TRANSCODING resources,> resources available to support 0 sessions; please modify the> configuration and retry> router2(config-dspfarm-profile)#>> On Mon, Jul 7, 2008 at 10:39 AM, Onur Tufekci <[EMAIL PROTECTED]>> wrote:>>>> Here is the configuration and results:>>>> router2(config)#do show run>> Building configuration...>> Current configuration : 2938 bytes>> !>> ! Last conf iguration change at 15:11:09 UTC Mon Jul 7 2008>> ! NVRAM config last updated at 14:49:04 UTC Mon Jul 7 2008>> !>> version 12.4>> service timestamps debug datetime msec>> service timestamps log datetime msec>> service password-encryption>> !>> hostname router2>> !>> boot-start-marker>> boot-end-marker>> !>> card type t1 0 0>> no logging console>> enable secret 5 $1$7cJ4$U9gWuPCv.H1DPdXYIyWJD0>> !>> no aaa new-model>> !>> resource policy>> !>> network-clock-participate wic 0>> !>> !>> ip cef>> !>> !>> no ip domain lookup>> !>> isdn switch-type primary-ni>> !>> voice-card 0>> dspfarm>> dsp services dspfarm>> !>> !>> !>> !>> !>> !>> !>> !>> !>> !>> !>> !>> !>> !>> !>> !>> !>> !>> !>> controller T1 0/0/0>> framing esf>> linecode b8zs>> !>> controller T1 0/0/1>> framing esf>> linecode b8zs>> !>> !>> !>> !>> interface FastEthernet0/0>> ip address 192.168.2.1 255.255.255.0>> duplex full>> speed 100>> h323-gateway voip bind srcaddr 192.168.2.1>> !>> interface FastEthernet0 /1>> description Management_IP>> ip address 192.168.10.2 255.255.255.0>> duplex full>> speed 100>> !>> interface Service-Engine1/0>> no ip address>> shutdown>> !>> ip route 192.168.1.0 255.255.255.0 192.168.10.1>> ip route 192.168.3.0 255.255.255.0 192.168.10.3>> !>> ip http server>> no ip http secure-server>> !>> !>> !>> !>> control-plane>> !>> !>> !>> !>> !>> sccp local FastEthernet0/0>> sccp ccm 192.168.2.1 identifier 1>> sccp>> !>> sccp ccm group 1>> associate ccm 1 priority 1>> associate profile 2 register xcoder>> associate profile 1 register conference>> !>> dspfarm profile 2 transcode>> codec g711ulaw>> codec g729r8>> maximum sessions 4>> associate application SCCP>> shutdown>> !>> dspfarm profile 1 conference>> codec g711ulaw>> codec g729r8>> maximum sessions 1>> associate application SCCP>> shutdown>> !>> !>> dial-peer voice 1000 voip>> answer-address 1...>> destination-pattern 1...>> session target ipv4:192.168.1.1>> codec g711ulaw>> !>> dia l-peer voice 9 pots>> destination-pattern 9T>> incoming called-number 14345552...>> direct-inward-dial>> !>> !>> !>> telephony-service>> max-ephones 2>> max-dn 2>> ip source-address 192.168.2.1 port 2000>> auto assign 1 to 2>> system message Your current options>> sdspfarm units 5>> sdspfarm tag 1 xcoder>> sdspfarm tag 2 conference>> dialplan-pattern 1 14345552... extension-length 4>> max-conferences 8 gain -6>> call-forward pattern .T>> web admin system name cisco password cisco>> dn-webedit>> time-webedit>> transfer-system full-consult>> transfer-pattern .T>> secondary-dialtone 9>> !>> !>> ephone-dn 1 dual-line>> number 2001>> description 14345552001>> name Gil Grissom>> !>> !>>>> router2(config)#dspfarm>> router2(config)#>> router2(config)#>> router2(config)#>> router2(config)#dspfarm pro 2>> router2(config-dspfarm-profile)#no shut>> router2(config-dspfarm-profile)#dspfarm pro 1>> router2(config-dspfarm-profile)#no shut>> Enabling profile failed due to insufficient CONFERENCING resources,>> resources available to support 0 sessions; please modify the>> configuration and retry>> router2(config-dspfarm-profile)#do show inv>> NAME: "2811 chassis", DESCR: "2811 chassis">> PID: CISCO2811 , VID: V03 , SN: FHK103671CU>> NAME: "VWIC2-2MFT-T1/E1 - 2-Port RJ-48 Multiflex Trunk - T1/E1 on Slot 0>> SubSlot 0", DESCR: "VWIC2-2MFT-T1/E1 - 2-Port RJ-48 Multiflex Trunk - T1/E1">> PID: VWIC2-2MFT-T1/E1 , VID: V01 , SN: FOC102540TY>> NAME: "PVDMII DSP SIMM with one DSP on Slot 0 SubSlot 4", DESCR: "PVDMII>> DSP SIMM with one DSP">> PID: PVDM2-16 , VID: V01 , SN: FOC1032054R>> NAME: "NM-SE on Slot 1", DESCR: "NM-SE">> PID: NM-CUE , VID: V03, SN: FOC10120B2E>> NAME: "40GB IDE Disc Daughter Card on Slot 1 SubSlot 0", DESCR: "40GB IDE>> Disc Daughter Card">> PID: , VID: 1.0, SN: FOC10170V2B>>>>>> On Mon, Jul 7, 2008 at 9:14 AM, Onur Tufekci <[EMAIL PROTECTED]>>> wrote:>>>>>> I actual ly configured all that right after I send this message but no>>> luck.>>>>>> On Sun, Jul 6, 2008 at 11:23 PM, Vik Malhi <[EMAIL PROTECTED]> wrote:>>>>>>>> try configuring sccp ccm and sccp ccm group before you set the max>>>> sessions.>>>>>>>>>>>> Vik Malhi �C CCIE #13890>>>> Senior Technical Instructor - IPexpert, Inc.>>>>>>>> Telephone: +1.810.326.1444>>>> Fax: +1.810.454.0130>>>> Mailto: [EMAIL PROTECTED]>>>>>>>> Join our free online support and peer group communities:>>>> http://www.IPexpert.com/communities>>>>>>>> IPexpert - The Global Leader in Self-Study, Classroom-Based,>>>> Video-On-Demand and Audio Certification Training Tools for the Cisco CCIE>>>> R&S Lab, CCIE Security Lab, CCIE Service Provider Lab , CCIE Voice Lab and>>>> CCIE Storage Lab Certifications.>>>>>>>>>>>> ________________________________>>>> From: [EMAIL PROTECTED]>>>> [mailto:[EMAIL PROTECTED] On Behalf Of Mehmet Tufekci>>>> Sent: Sunday, July 06, 2008 9:17 AM>>>> To: ccievoice1>>>> Cc: OSL CCIE Voice Lab Exam>>>> Subject: Re: [OSL | CCIE_Voice] 0 Conf max sessions>>>>>>>>>>>> I have 1-3 configured under controller.>>>> I am able to see 1-8 available resources under my transcoder profile but>>>> no luck with conference. I know conference will not show up if you enable>>>> transcoder profile first. No matter what I tried I can not get it to run.>>>>>>>>>>>> On Jul 6, 2008, at 11:44 AM, ccievoice1 wrote:>>>>>>>> have you utilized all the dsp resources for your pri-group?>>>>>>>> On Sun, Jul 6, 2008 at 11:31 PM, Mehmet Tufekci <[EMAIL PROTECTED]>>>>> wrote:>>>>>>>>>> Hi All,>>>>>>>>>> I can not figure out why maximum session <0-0> is showing under>>>>> conference profile.>>>>>>>>>> I did not enable transcoding profile yet.>>>>>>>>>> voice-card 0>>>>> dspfarm>>>>> dsp services dspfarm>>>>> !>>>>> !>>>>> !>>>>> interface Loopback0>>>>> ip address 172.3.102.1 255.255.255.255>>>>> ip ospf network point-to-point>>>>> !>> >>> !>>>>> sccp local Loopback0>>>>> sccp>>>>> !>>>>> dspfarm profile 1 >>> transcode>>>>> codec g711ulaw>>>>> codec g729r8>>>>> shutdown>>>>> >>> !>>>>> dspfarm profile 2 conference>>>>> codec g711ulaw>>>>> codec >>> g729r8>>>>> shutdown>>>>> !>>>>>>>>>>>>>>>>>>>>>>>>> _________________________________________________________________ NEW! Get Windows Live FREE. http://www.get.live.com/wl/all
