Re: [OSL | CCIE_Voice] (no subject)
Apologies everyone, I sent my request to the wrong email, should have been to ccie_rs-requ...@onlinestudylist.com as I want to change my subscription options. However I have felt like sending a general request for help during my studies. ;o) The good news is that I finally passed the lab, the same week as the 2 Matthew's I think, so a big thank you to everyone and stay with it those who have not crossed the line yet as it is a very satisfying place to be. I have not really been a major contributor to this this list but used it more for reference as I concentrated on other sources for my study and preperation. I have had a family break since passing and look forward to spending more time with them now. Thanks Trevor Peddle CCIE #26723 (Voice) From: Amp amccar...@cciequest.com To: Sam Park upperlevelpark...@gmail.com Cc: ccie_voice@onlinestudylist.com Sent: Thu, 2 September, 2010 2:32:30 Subject: Re: [OSL | CCIE_Voice] (no subject) I think I'm going to go to the doctor and just yell, Ouch!. Hahaha naa all joking aside, I know what you mean. Quoting Sam Park upperlevelpark...@gmail.com: This is like one of those instances when a person's mind is so fried that only the basic primal pleas escape from a person's lips. In this case, through the keyboard and into an e-mail. Sam Park On Wed, Sep 1, 2010 at 6:00 PM, rearviewmirror rearviewmir...@gmail.comwrote: Help.. pretty much sums up my whole lab preparation. On Thu, Sep 2, 2010 at 7:44 AM, Vik Malhi vma...@ipexpert.com wrote: Can you be a little bit more specific detailing the problem? Thanks:-) -- Vik Malhi ? CCIE #13890 Managing Partner / Instructor - IPexpert, Inc. Mailto: *vma...@ipexpert.com *Telephone: +1.810.326.1444 ext 420 Fax: +1.810.454.0130 Live Assistance, Please visit: www.ipexpert.com/chat * http://www.ipexpert.com/chat* IPexpert is a premier provider of Self-Study Workbooks, Video on Demand, Audio Tools, Online Hardware Rental and Classroom Training for the Cisco CCIE (RS, Voice, Security Service Provider) certification(s) with training locations throughout the United States, Europe, South Asia and Australia. Be sure to visit our online communities at www.ipexpert.com/communities *http://www.ipexpert.com/communities* and our public website at www.ipexpert.com *http://www.ipexpert.com/* -- *From: *Trevor Peddle trevor...@yahoo.co.uk *Date: *Wed, 1 Sep 2010 21:28:10 + (GMT) *To: *OSL Group ccie_voice@onlinestudylist.com *Subject: *[OSL | CCIE_Voice] (no subject) help -- ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] Hardware Phones behind VPN Client
Hi all I tried to get some phones (7960 and 7965) working behind my VPN client today without success, I followed the instructions that Mark Snow posted on the blog. I could ping my phones from my laptop via the Ethernet and could obvioulsy see the IPExpert environment accros the VPN which was connected via my wireless NIC which was shared. I setup static IP's, default gateway and TFTP etc on the phones and could see traffic passing accross the ethernet (Not enough though !). Has anyone got this working, are there any gotchas that are not on the post by Mark Snow ? Thanks Trevor Peddle ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] Pod 26 - BR1 NM-16ESW port config
Hi all, I have configured the phone ports on BR1 as follows, they get an IP from the DHCP scope on CUCM server which I can see also with CDP on the router. However they are not contactable via IP, if I clear the CDP table the addresses disapear. I can ping the default gateway, it is correct in DHCP as is the net mask. I sometimes get a response via ping but probably a couple out of the blue now and again. The VLAN interfaces's are set correctly because I can see them ok. interface FastEthernet1/0 switchport trunk native vlan 360 switchport mode trunk switchport voice vlan 460 interface FastEthernet1/8 switchport trunk native vlan 360 switchport mode trunk switchport voice vlan 460 I configured switchport trunk encapsulation dot1q but it does not show in the config I also tried just as an access port with access vlan and voice vlan, also without success. This seems such an easy issue as I have never had such issues before when configuring similar ? I know my brain is swimming at the moment, first lab attempt on 6th Nov, but I do not think I have missed anything? I had the same problem on the same pod yesterday.
[OSL | CCIE_Voice] Proctor Labs is down
I have lost connectivity with proctor labs, my VPN client is connected but I cannot access via the web. I logged onto work to try a different ISP and that is the same. Looks like that is the end of my lab for today ... Trevor
Re: [OSL | CCIE_Voice] Pod 26 - BR1 NM-16ESW port config
I have had many replies and verification of my configuration, thank you all for that. Yes the VLANs were ceated and verified I could also ping the VLAN interfaces. So the scenario is this the interfaces and vlans are configured correctly as is the DHCP scope. The phones pick up an address from DHCP and then drop it, if I shut/no shut the interfaces they will pick up the DHCP ip again and then drop it. I cleared CDP else the IP would stay there. This has happened to me 2 days running I wonder if the module could be checked ? I definatley went over the 10 minute troubleshooting rule on this one From: Trevor Peddle [EMAIL PROTECTED] To: ccie_voice@onlinestudylist.com Sent: Friday, 24 October, 2008 18:55:24 Subject: [OSL | CCIE_Voice] Pod 26 - BR1 NM-16ESW port config Hi all, I have configured the phone ports on BR1 as follows, they get an IP from the DHCP scope on CUCM server which I can see also with CDP on the router. However they are not contactable via IP, if I clear the CDP table the addresses disapear. I can ping the default gateway, it is correct in DHCP as is the net mask. I sometimes get a response via ping but probably a couple out of the blue now and again. The VLAN interfaces's are set correctly because I can see them ok. interface FastEthernet1/0 switchport trunk native vlan 360 switchport mode trunk switchport voice vlan 460 interface FastEthernet1/8 switchport trunk native vlan 360 switchport mode trunk switchport voice vlan 460 I configured switchport trunk encapsulation dot1q but it does not show in the config I also tried just as an access port with access vlan and voice vlan, also without success. This seems such an easy issue as I have never had such issues before when configuring similar ? I know my brain is swimming at the moment, first lab attempt on 6th Nov, but I do not think I have missed anything? I had the same problem on the same pod yesterday.
