Hello Ikizoo,
Your service name under application is cmm and under dial peer you are invoking
ccm so incoming dial peer does not find the service and call fails.
Also in the debugs you can see this error..
RELEASE_COMP pd = 8 callref = 0x80A1 Cause i = 0x80BF - Service/option
not available, unspecified
Thanks and regards,
Piyush Jain
Sent from my android device.
-----Original Message-----
From: ccie_voice-requ...@onlinestudylist.com
To: ccie_voice@onlinestudylist.com
Sent: Thu, 16 May 2013 11:01 AM
Subject: CCIE_Voice Digest, Vol 87, Issue 38
Send CCIE_Voice mailing list submissions to
ccie_voice@onlinestudylist.com
To subscribe or unsubscribe via the World Wide Web, visit
http://onlinestudylist.com/mailman/listinfo/ccie_voice
or, via email, send a message with subject or body 'help' to
ccie_voice-requ...@onlinestudylist.com
You can reach the person managing the list at
ccie_voice-ow...@onlinestudylist.com
When replying, please edit your Subject line so it is more specific
than "Re: Contents of CCIE_Voice digest..."
Today's Topics:
1. Cucm log (Dharambir kumar varma)
2. Cucm log (Dharambir kumar varma)
3. Re: MVA Fast Busy (ikizoo hello)
4. Re: MVA Fast Busy (Abdullin Kamil)
5. Re: MVA Fast Busy (GRASSMUGG Christoph)
----------------------------------------------------------------------
Message: 1
Date: Thu, 16 May 2013 10:00:55 +0530
From: Dharambir kumar varma <dharambi...@gmail.com>
To: "ccie_voice@onlinestudylist.com" <ccie_voice@onlinestudylist.com>
Subject: [OSL | CCIE_Voice] Cucm log
Message-ID:
<ca+iwkjsxty0ddkospu06mw4xqsuknqebbkos0nwguv-xqbx...@mail.gmail.com>
Content-Type: text/plain; charset="iso-8859-1"
Hi
Can we delete the audit logs on cucm which is seen on Rtmt tool.
Is it possible ...
-------------- next part --------------
An HTML attachment was scrubbed...
URL: </archives/ccie_voice/attachments/20130516/34bb040f/attachment-0001.html>
------------------------------
Message: 2
Date: Thu, 16 May 2013 10:05:26 +0530
From: Dharambir kumar varma <dharambi...@gmail.com>
To: "ccie_voice@onlinestudylist.com" <ccie_voice@onlinestudylist.com>
Subject: [OSL | CCIE_Voice] Cucm log
Message-ID:
<CA+iWkJSBDGJQQk6E2TXjCXJptj4zWa3_ZgVy2Oc2XJ0vU=_...@mail.gmail.com>
Content-Type: text/plain; charset="iso-8859-1"
Hi
Can we delete audit logs on cucm
Which can be seen on Rtmt tool.
Is it possible....
-------------- next part --------------
An HTML attachment was scrubbed...
URL: </archives/ccie_voice/attachments/20130516/27cdebb2/attachment-0001.html>
------------------------------
Message: 3
Date: Wed, 15 May 2013 21:48:20 -0700
From: ikizoo hello <ikiz...@hotmail.com>
To: Josh Petro <josh.pe...@gmail.com>,
"ccie_voice@onlinestudylist.com" <ccie_voice@onlinestudylist.com>
Subject: Re: [OSL | CCIE_Voice] MVA Fast Busy
Message-ID: <bay172-w29a3a6888bf62b11239673ea...@phx.gbl>
Content-Type: text/plain; charset="iso-8859-1"
application service cmm http://10.10.210.10:8080/ccmivr/pages/IVRMainpage.vxml
dial-peer voice 2 pots service ccm
ccm ---> cmm ?
Date: Wed, 15 May 2013 23:48:40 -0400
From: josh.pe...@gmail.com
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] MVA Fast Busy
Hi All,
I'm on Volume 1 section 5C which is asking for Mobile Vocie Access
configuration. What I'm getting when I dial from the PSTN to the HQ Phone 2 is
a fast busy after a few seconds of silence.
I know this has been talked about in the past on this forum, but for the life
of me I can't find it.
I've followed what was in the workbook exactly and I'm not getting anywhere.
Now, I'm doing this on my home lab with IOS 12.4.22T5 and nothing else in the
flash directory. Is there something that needs to be 'installed' on the router
to allow it to see the vxml code on the CUCM? I've never been asked to do
Mobile Voice Access before, so this is a first.
The CUCM is configured with the Mobile Voice Access number of 5999 and the
gateway is configured for 4 digits inbound (plus I tested other inbound calls
and they still work fine).
The Services parameters are correct and MVA is enabled. The voice-class codec
has G711u and G729r8 and that's it. I'm thinking codec, but I'm not sure why.
I can't figure out what I missed.
Many thanks!Josh
The config and debug isdn q931 output is below if it helps. I didn't get the
chance to get the voip ccapi debugs, so please let me know if you need them and
I'll grab them tomorrow.
!application service cmm http://10.10.210.10:8080/ccmivr/pages/IVRMainpage.vxml
!!
dial-peer voice 5010 voip description MVA DID destination-pattern 5999
voice-class codec 1 session target ipv4:10.10.210.10 incoming called-number .
dtmf-relay h245-alphanumeric
no vad!dial-peer voice 2 pots service ccm incoming called-number 2123945999 no
digit-strip!!!!!
!HQ-RTR(config-dial-peer)#May 16 03:12:37.874: ISDN Se0/0/0:23 Q931: RX <-
SETUP pd = 8 callref = 0x00A1 Bearer Capability i = 0x8090A2
Standard = CCITT
Transfer Capability = Speech Transfer Mode =
Circuit Transfer Rate = 64 kbit/s Channel ID i =
0xA98381 Exclusive, Channel 1
Progress Ind i = 0x8583 - Origination address is non-ISDN
Calling Party Number i = 0x4180, '2123942123' Plan:ISDN,
Type:Subscriber(local) Called Party Number i = 0xA1, '2123945999'
Plan:ISDN, Type:NationalMay 16 03:12:37.874: ISDN Se0/0/0:23
Q931: Received SETUP callref = 0x80A1 callID = 0x0020 switch = primary-ni
interface = User May 16 03:12:37.882: %CALL_CONTROL-6-APP_NOT_FOUND:
Application ccm in dial-peer 2 not found. Handing callid 187 to the alternate
app .
HQ-RTR(config-dial-peer)#May 16 03:12:37.890: ISDN Se0/0/0:23 Q931: TX ->
RELEASE_COMP pd = 8 callref = 0x80A1 Cause i = 0x80BF - Service/option
not available, unspecified
HQ-RTR(config-dial-peer)#
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: </archives/ccie_voice/attachments/20130515/f8a5f20e/attachment-0001.html>
------------------------------
Message: 4
Date: Thu, 16 May 2013 10:56:32 +0600
From: Abdullin Kamil <kabdulli...@gmail.com>
To: Josh Petro <josh.pe...@gmail.com>
Cc: "ccie_voice@onlinestudylist.com" <ccie_voice@onlinestudylist.com>
Subject: Re: [OSL | CCIE_Voice] MVA Fast Busy
Message-ID:
<cagwhbqa-no+t7jjypcdjb0hifnm5cesxif_bu26w8vkopzo...@mail.gmail.com>
Content-Type: text/plain; charset="koi8-r"
Hi Josh.
You have error in name service "ccm" and "cmm".
application
service *cmm *
dial-peer voice 2 pots
service *ccm*
Change name for service to ccm.
2013/5/16 Josh Petro <josh.pe...@gmail.com>
> Hi All,
>
> I'm on Volume 1 section 5C which is asking for Mobile Vocie Access
> configuration. What I'm getting when I dial from the PSTN to the HQ Phone 2
> is a fast busy after a few seconds of silence.
>
> I know this has been talked about in the past on this forum, but for the
> life of me I can't find it.
>
> I've followed what was in the workbook exactly and I'm not getting
> anywhere. Now, I'm doing this on my home lab with IOS 12.4.22T5 and nothing
> else in the flash directory. Is there something that needs to be
> 'installed' on the router to allow it to see the vxml code on the CUCM?
> I've never been asked to do Mobile Voice Access before, so this is a first.
>
> The CUCM is configured with the Mobile Voice Access number of 5999 and the
> gateway is configured for 4 digits inbound (plus I tested other inbound
> calls and they still work fine).
>
> The Services parameters are correct and MVA is enabled. The voice-class
> codec has G711u and G729r8 and that's it. I'm thinking codec, but I'm not
> sure why.
>
> I can't figure out what I missed.
>
> Many thanks!
> Josh
>
> The config and debug isdn q931 output is below if it helps. I didn't get
> the chance to get the voip ccapi debugs, so please let me know if you need
> them and I'll grab them tomorrow.
>
> !
> application
> service cmm http://10.10.210.10:8080/ccmivr/pages/IVRMainpage.vxml
> !
> !
> dial-peer voice 5010 voip
> description MVA DID
> destination-pattern 5999
> voice-class codec 1
> session target ipv4:10.10.210.10
> incoming called-number .
> dtmf-relay h245-alphanumeric
> no vad
> !
> dial-peer voice 2 pots
> service ccm
> incoming called-number 2123945999
> no digit-strip
> !
> !
> !
> !
> !
> !
> HQ-RTR(config-dial-peer)#
> May 16 03:12:37.874: ISDN Se0/0/0:23 Q931: RX <- SETUP pd = 8 callref =
> 0x00A1
> Bearer Capability i = 0x8090A2
> Standard = CCITT
> Transfer Capability = Speech
> Transfer Mode = Circuit
> Transfer Rate = 64 kbit/s
> Channel ID i = 0xA98381
> Exclusive, Channel 1
> Progress Ind i = 0x8583 - Origination address is non-ISDN
> Calling Party Number i = 0x4180, '2123942123'
> Plan:ISDN, Type:Subscriber(local)
> Called Party Number i = 0xA1, '2123945999'
> Plan:ISDN, Type:National
> May 16 03:12:37.874: ISDN Se0/0/0:23 Q931: Received SETUP callref =
> 0x80A1 callID = 0x0020 switch = primary-ni interface = User
> May 16 03:12:37.882: %CALL_CONTROL-6-APP_NOT_FOUND: Application ccm in
> dial-peer 2 not found. Handing callid 187 to the alternate app .
>
> HQ-RTR(config-dial-peer)#
> May 16 03:12:37.890: ISDN Se0/0/0:23 Q931: TX -> RELEASE_COMP pd = 8
> callref = 0x80A1
> Cause i = 0x80BF - Service/option not available, unspecified
> HQ-RTR(config-dial-peer)#
>
>
>
> _______________________________________________
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>
--
? ?????????,
?????? ????????
-------------- next part --------------
An HTML attachment was scrubbed...
URL: </archives/ccie_voice/attachments/20130516/0def5be2/attachment-0001.html>
------------------------------
Message: 5
Date: Thu, 16 May 2013 07:08:51 +0200
From: GRASSMUGG Christoph <christoph.grassm...@nextiraone.eu>
To: Josh Petro <josh.pe...@gmail.com>
Cc: "ccie_voice@onlinestudylist.com" <ccie_voice@onlinestudylist.com>
Subject: Re: [OSL | CCIE_Voice] MVA Fast Busy
Message-ID: <9f46ff16-3557-4c4c-b5e8-ffb8aa66b...@nextiraone.eu>
Content-Type: text/plain; charset="utf-8"
Hi,
Your Problem is...
Dial-Peer
Service ccm
But under Application your Service is caller cmm
So no Service can be found...
-Christoph
Sent from a Smartphone.
Am 16.05.2013 um 06:00 schrieb "Josh Petro"
<josh.pe...@gmail.com<mailto:josh.pe...@gmail.com>>:
Hi All,
I'm on Volume 1 section 5C which is asking for Mobile Vocie Access
configuration. What I'm getting when I dial from the PSTN to the HQ Phone 2 is
a fast busy after a few seconds of silence.
I know this has been talked about in the past on this forum, but for the life
of me I can't find it.
I've followed what was in the workbook exactly and I'm not getting anywhere.
Now, I'm doing this on my home lab with IOS 12.4.22T5 and nothing else in the
flash directory. Is there something that needs to be 'installed' on the router
to allow it to see the vxml code on the CUCM? I've never been asked to do
Mobile Voice Access before, so this is a first.
The CUCM is configured with the Mobile Voice Access number of 5999 and the
gateway is configured for 4 digits inbound (plus I tested other inbound calls
and they still work fine).
The Services parameters are correct and MVA is enabled. The voice-class codec
has G711u and G729r8 and that's it. I'm thinking codec, but I'm not sure why.
I can't figure out what I missed.
Many thanks!
Josh
The config and debug isdn q931 output is below if it helps. I didn't get the
chance to get the voip ccapi debugs, so please let me know if you need them and
I'll grab them tomorrow.
!
application
service cmm http://10.10.210.10:8080/ccmivr/pages/IVRMainpage.vxml
!
!
dial-peer voice 5010 voip
description MVA DID
destination-pattern 5999
voice-class codec 1
session target ipv4:10.10.210.10
incoming called-number .
dtmf-relay h245-alphanumeric
no vad
!
dial-peer voice 2 pots
service ccm
incoming called-number 2123945999
no digit-strip
!
!
!
!
!
!
HQ-RTR(config-dial-peer)#
May 16 03:12:37.874: ISDN Se0/0/0:23 Q931: RX <- SETUP pd = 8 callref = 0x00A1
Bearer Capability i = 0x8090A2
Standard = CCITT
Transfer Capability = Speech
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0xA98381
Exclusive, Channel 1
Progress Ind i = 0x8583 - Origination address is non-ISDN
Calling Party Number i = 0x4180, '2123942123'
Plan:ISDN, Type:Subscriber(local)
Called Party Number i = 0xA1, '2123945999'
Plan:ISDN, Type:National
May 16 03:12:37.874: ISDN Se0/0/0:23 Q931: Received SETUP callref = 0x80A1
callID = 0x0020 switch = primary-ni interface = User
May 16 03:12:37.882: %CALL_CONTROL-6-APP_NOT_FOUND: Application ccm in
dial-peer 2 not found. Handing callid 187 to the alternate app .
HQ-RTR(config-dial-peer)#
May 16 03:12:37.890: ISDN Se0/0/0:23 Q931: TX -> RELEASE_COMP pd = 8 callref =
0x80A1
Cause i = 0x80BF - Service/option not available, unspecified
HQ-RTR(config-dial-peer)#
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com<http://www.ipexpert.com>
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com<http://www.PlatinumPlacement.com>
------------------------------
_______________________________________________
CCIE_Voice mailing list
CCIE_Voice@onlinestudylist.com
http://onlinestudylist.com/mailman/listinfo/ccie_voice
End of CCIE_Voice Digest, Vol 87, Issue 38
******************************************
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
