Re: [OSL | CCIE_Voice] Configuring Voice-Card for DSPFarm
With the PVDM 1, you can't even enter dspfarm under the voice-card config...It takes you to the dspfarm configuration items... For the PVDM2, you can either use no dspfarm or dspfarm, then dsp services dspfarm. I believe that if the PVDM2 will be shared for voice circuits and dsp resources, then the command no dspfarm must be used. If the voice-card is not shared with voice circuits, then you can use the dspfarm command... Thanks, Kevin Kevin Porter Systems Engineer L4 Netelligent Corporation 400 South Woods Mill Drive, Suite 105 St. Louis, MO 63017 Office: (314) 392-6921 Cell: (314) 852-1252 Fax: (314) 392-9760 [EMAIL PROTECTED] www.netelligent.com Bridging The Gap Between Good and GREAT IP Communications! From: Balamurugan Singaram [mailto:[EMAIL PROTECTED] Sent: Wednesday, October 22, 2008 11:08 PM To: Kevin Porter; Mark Snow Cc: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] Configuring Voice-Card for DSPFarm Hi Mark, If we are using PVDM 1 then we should used only the following config: Voice-card 0 dspfarm dsp services dspfarm Could you please explain. Thanks, Bala. --- On Thu, 23/10/08, Mark Snow [EMAIL PROTECTED] wrote: From: Mark Snow [EMAIL PROTECTED] Subject: Re: [OSL | CCIE_Voice] Configuring Voice-Card for DSPFarm To: Kevin Porter [EMAIL PROTECTED] Cc: ccie_voice@onlinestudylist.com Date: Thursday, 23 October, 2008, 2:03 AM dspfarm is for PVDM (orig) dsp services dspfarm is for PVDM2 and the config you pointed out Must be used when bridging or sharing PVDM2 resources as you mentioned. Cheers, -- Mark Snow CCIE #14073 (Voice, Security) Senior Technical Instructor - IPexpert, Inc. Telephone: +1.810.326.1444 Fax: +1.309.413.4097 Mailto: [EMAIL PROTECTED] -- Join our free online support and peer group communities: http://www.IPexpert.com/communities -- IPexpert - The Global Leader in Self-Study, Classroom-Based, Video-On-Demand and Audio Certification Training Tools for the Cisco CCIE RS Lab, CCIE Security Lab, CCIE Service Provider Lab , CCIE Voice Lab and CCIE Storage Lab Certifications. -- On Oct 22, 2008, at 3:19 PM, Kevin Porter wrote: Quick question...when configuring the Voice-Card to act as a dspfarm, I have seen almost all the IPExpert config's to look like this.. Voice-card 0 dspfarm dsp services dspfarm but, in the real world, I can not do this with a shared PVDM that is terminating voice circuits (PRI, FXS, FXO, etc...). I have had to use the following config: Voice-card 0 no dspfarm dsp services dspfarm So, the question is this, is there anything wrong with my config that would cause issues? Thanks, Kevin Kevin Porter Systems Engineer L4 Netelligent Corporation 400 South Woods Mill Drive, Suite 105 St. Louis , MO 63017 Office: (314) 392-6921 Cell: (314) 852-1252 Fax: (314) 392-9760 [EMAIL PROTECTED] www.netelligent.com http://www.netelligent.com/ Bridging The Gap Between Good and GREAT IP Communications! New Email names for you! http://sg.rd.yahoo.com/aa/mail/domainchoice/mail/signature/*http:/mail. promotions.yahoo.com/newdomains/aa/ Get the Email name you've always wanted on the new @ymail and @rocketmail. Hurry before someone else does!
Re: [OSL | CCIE_Voice] Configuring Voice-Card for DSPFarm
Hi Mark, If we are using PVDM 1 then we should used only the following config: Voice-card 0 dspfarm dsp services dspfarm Could you please explain. Thanks, Bala. --- On Thu, 23/10/08, Mark Snow [EMAIL PROTECTED] wrote: From: Mark Snow [EMAIL PROTECTED] Subject: Re: [OSL | CCIE_Voice] Configuring Voice-Card for DSPFarm To: Kevin Porter [EMAIL PROTECTED] Cc: ccie_voice@onlinestudylist.com Date: Thursday, 23 October, 2008, 2:03 AM dspfarm is for PVDM (orig) dsp services dspfarm is for PVDM2 and the config you pointed out Must be used when bridging or sharing PVDM2 resources as you mentioned. Cheers, -- Mark Snow CCIE #14073 (Voice, Security) Senior Technical Instructor - IPexpert, Inc. Telephone: +1.810.326.1444 Fax: +1.309.413.4097 Mailto: [EMAIL PROTECTED] -- Join our free online support and peer group communities: http://www.IPexpert.com/communities -- IPexpert - The Global Leader in Self-Study, Classroom-Based, Video-On-Demand and Audio Certification Training Tools for the Cisco CCIE RS Lab, CCIE Security Lab, CCIE Service Provider Lab , CCIE Voice Lab and CCIE Storage Lab Certifications. -- On Oct 22, 2008, at 3:19 PM, Kevin Porter wrote: Quick question…when configuring the Voice-Card to act as a dspfarm, I have seen almost all the IPExpert config’s to look like this.. Voice-card 0 dspfarm dsp services dspfarm but, in the real world, I can not do this with a “shared” PVDM that is terminating voice circuits (PRI, FXS, FXO, etc…). I have had to use the following config: Voice-card 0 no dspfarm dsp services dspfarm So, the question is this, is there anything wrong with my config that would cause issues? Thanks, Kevin Kevin Porter Systems Engineer L4 Netelligent Corporation 400 South Woods Mill Drive, Suite 105 St. Louis , MO 63017 Office: (314) 392-6921 Cell: (314) 852-1252 Fax: (314) 392-9760 [EMAIL PROTECTED] www.netelligent.com Bridging The Gap Between Good and GREAT IP Communications! Get your preferred Email name! Now you can @ymail.com and @rocketmail.com. http://mail.promotions.yahoo.com/newdomains/aa/
Re: [OSL | CCIE_Voice] Configuring Voice-Card for DSPFarm
Correct. dspfarm allows AIM's or VWICs to access the DSPs for mapping. dsp services dspfarm allows for dspfarms to be created for xcoders and conf bridges. @Kevin, hmmm, not sure which phys platform you are working on - but the dspfarm command originated in 12.1.5XM - long prior to there being a PVDM2 on the market and was needed for mapping dsps to various AIM- VOICE-30 and VWICs back in 36xx routers. http://www.cisco.com/en/US/docs/ios/voice/command/reference/vr_d2.html#wp1444552 -- Mark Snow CCIE #14073 (Voice, Security) Senior Technical Instructor - IPexpert, Inc. Telephone: +1.810.326.1444 Fax: +1.309.413.4097 Mailto: [EMAIL PROTECTED] -- Join our free online support and peer group communities: http://www.IPexpert.com/communities -- IPexpert - The Global Leader in Self-Study, Classroom-Based, Video-On- Demand and Audio Certification Training Tools for the Cisco CCIE RS Lab, CCIE Security Lab, CCIE Service Provider Lab , CCIE Voice Lab and CCIE Storage Lab Certifications. -- On Oct 23, 2008, at 12:08 AM, Balamurugan Singaram wrote: Hi Mark, If we are using PVDM 1 then we should used only the following config: Voice-card 0 dspfarm dsp services dspfarm Could you please explain. Thanks, Bala. --- On Thu, 23/10/08, Mark Snow [EMAIL PROTECTED] wrote: From: Mark Snow [EMAIL PROTECTED] Subject: Re: [OSL | CCIE_Voice] Configuring Voice-Card for DSPFarm To: Kevin Porter [EMAIL PROTECTED] Cc: ccie_voice@onlinestudylist.com Date: Thursday, 23 October, 2008, 2:03 AM dspfarm is for PVDM (orig) dsp services dspfarm is for PVDM2 and the config you pointed out Must be used when bridging or sharing PVDM2 resources as you mentioned. Cheers, -- Mark Snow CCIE #14073 (Voice, Security) Senior Technical Instructor - IPexpert, Inc. Telephone: +1.810.326.1444 Fax: +1.309.413.4097 Mailto: [EMAIL PROTECTED] -- Join our free online support and peer group communities: http://www.IPexpert.com/communities -- IPexpert - The Global Leader in Self-Study, Classroom-Based, Video- On-Demand and Audio Certification Training Tools for the Cisco CCIE RS Lab, CCIE Security Lab, CCIE Service Provider Lab , CCIE Voice Lab and CCIE Storage Lab Certifications. -- On Oct 22, 2008, at 3:19 PM, Kevin Porter wrote: Quick question…when configuring the Voice-Card to act as a dspfarm, I have seen almost all the IPExpert config’s to look like this.. Voice-card 0 dspfarm dsp services dspfarm but, in the real world, I can not do this with a “shared” PVDM that is terminating voice circuits (PRI, FXS, FXO, etc…). I have had to use the following config: Voice-card 0 no dspfarm dsp services dspfarm So, the question is this, is there anything wrong with my config that would cause issues? Thanks, Kevin Kevin Porter Systems Engineer L4 Netelligent Corporation 400 South Woods Mill Drive, Suite 105 St. Louis , MO 63017 Office: (314) 392-6921 Cell: (314) 852-1252 Fax: (314) 392-9760 [EMAIL PROTECTED] www.netelligent.com Bridging The Gap Between Good and GREAT IP Communications! New Email names for you! Get the Email name you've always wanted on the new @ymail and @rocketmail. Hurry before someone else does!
[OSL | CCIE_Voice] Configuring Voice-Card for DSPFarm
Quick question...when configuring the Voice-Card to act as a dspfarm, I have seen almost all the IPExpert config's to look like this.. Voice-card 0 dspfarm dsp services dspfarm but, in the real world, I can not do this with a shared PVDM that is terminating voice circuits (PRI, FXS, FXO, etc...). I have had to use the following config: Voice-card 0 no dspfarm dsp services dspfarm So, the question is this, is there anything wrong with my config that would cause issues? Thanks, Kevin Kevin Porter Systems Engineer L4 Netelligent Corporation 400 South Woods Mill Drive, Suite 105 St. Louis, MO 63017 Office: (314) 392-6921 Cell: (314) 852-1252 Fax: (314) 392-9760 [EMAIL PROTECTED] www.netelligent.com Bridging The Gap Between Good and GREAT IP Communications!
