You might want to uncheck the Media Transcoder required check box and try
that way. What I found out that if you do not have hardware transcoder in
your MRGL then the calls come in from CME over Gatekeeper to IPCC do not
work.
On Fri, May 30, 2008 at 10:50 AM, Rimon Vallavanatt Jr. <[EMAIL PROTECTED]>
wrote:
> I have setup the following:
>
>
>
> Configured two regions on the CCM, one that talks G.711 to everything else
> and one that talks G.729 to everything else. Created two DP, GK-711 and
> GK-729 with their respective regions. I registered the GK in call manager
> and then created two trunks. One using the GK-G711-DP and another using
> GK-G729-DP. Then created one route group with both trunks using top down
> distribution with GK-711-Trunk first and GK-G729-Trunk second. Created a RL
> and RP to point to the Route Group. I set BRQ to true on the CUCMs.
>
>
> I've also tried it with two RGs. I've tried it with the voice class codec
> and with two different dial-peers, one with 711, one with 729. It works just
> fine. The gatekeeper shows one call 711 one call 729. The phones on the CME
> , if I hit the "?" button show what I would expect.
>
>
>
> The problem is that at the HQ site the phones both show 711 when I hit the
> "?" button. I verified that the 729 stream is being transcoded to g711. My
> question is why?
>
>
>
> Thanks,
>
>
>
> *Rimon Vallavanatt Jr.*
>
> *Director, Installations*
>
> Phone:713.881.7133
>
> Fax:713.881.7233
>
