Check by removing all extra configs except the
ccm-manager music-on-hold,
and
call-manager-fallback
moh music-on-hold.au
multicast moh 239.1.1.1 port 16384 route 142.1.65.254 142.102.65.254
Try to make a call to any pstn side from your SB phone and put on hold. It
works.
I just finished it in my lab :)
When you finish it successfully, then check if you have Music on Hold
server MoH_3 has enable Multicast checked with Increment multicast on "IP",
my fav, and max hops should be configured to 1. This is why you are
spoofing moh from router flash. :)
HTH
On Fri, Mar 29, 2013 at 1:17 AM, Hesham Abdelkereem <
heshamcentr...@gmail.com> wrote:
> Dear Experts,
>
> I am trying to configure MOH in order to make SB Router source its music
> on hold from the local router.
>
> thats my configs
>
> A-Enable Multicast MOH for the audio stream:
> Go to CUCM --->Media Resources--->Music On Hold Audo Source
> Tick play continuously , Allow Multicasting
>
> B-Enable Multicast MOH for the MOH server:
> Publisher will be unicast MOH Server for HQ
> Subscriber will be multicast for SB Site
>
> Go to Media Resources ---> MOH Server--->MOH_3(Subscriber)
> Make MOH Device Pool
> Enable Multicast Audo Source on this MOH Server
>
> C-Create a Media Resource Group (MRG) for unicast MOH:
> Media Resources > Media Resource Group > Add New
> Name: MOH_UNICAST
> Selected Media Resources: MOH_2 (MOH)
> Make sure use multicast in unticked
>
> D-Create a Media Resource Group (MRG) for multicast MOH:
> Media Resources > Media Resource Group > Add New
> Name: MOH_MCAST
> Selected Media Resources: MOH_3 (MOH)
> Make sure use multicast in ticked
>
> E-Assign the newly created MRGs to appropriate Media Resource Group List
> (MRGL):
> Under HQ MRGL Add MOH_UNICAST
> Under SB MRGL Add MOH_MCAST
>
> Then Reset Device Pool to take effect
>
> On your SRST make sure that you make multicast
> SB
> call-manager-fallback
> moh music-on-hold.au
> multicast moh 239.1.1.1 port 16384 route 142.1.65.254 142.102.65.254
> loopback -to voice vlan
> exit
>
> ccm-manager music-on-hold
> ip multicast-routing
> int vlan 302
> ip pim dense-mode
> int lo0
> ip pim dense-mode
>
> I created a Region called MOH and it's G711 with all sites HQ , SB , SC
>
>
> When I call and place on hold and try to issue
> show ccm-manager music-on-hold
> i see 0 active calls
> knowing that also on the HQ Phone 1 and SB Phone 1 I put a music on hold
> source and without.
> All phones are in the correct Device pool , region and location.
>
> I have noticed it's beeping while on hold that means it's unable to invoke
> the moh
> knowing that i checked the flash: of the router it has the moh file
> correclty
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>
--
Suresh Bhandari
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
