Re: [OSL | CCIE_Voice] OWLE load from proctorlab
Hi Karen, Loopback 0 subnet mask is /32 so it's only one host. If you want to test this idea, try using another interface like voice vlan interface or a new loopback interface with /24 mask. For changing the ip address of the cue after it's been up, I think you need to reload the cue. I haven't experiment this myself but this is what I hear and one time reload for this is enough. I remember one time in proctor labs , I couldn't reach R3 lo0 as the ntp server during the cue wizard and I had to reload the cue once , then it worked. Regards. Khaled Date: Sun, 30 Jun 2013 16:26:23 -0700 From: karen.johnson...@yahoo.ca Subject: Re: [OSL | CCIE_Voice] OWLE load from proctorlab To: khaled_sah...@hotmail.com; ccie_voice@onlinestudylist.com hi khalid, do u mean when i change mask of loopback 0 , it will fix the issue too ? - what is the right procedure to do after change the ip address os service-engine 0/0 do i need to do "ser ser 0/0 reload" or "ser ser 0/0 reset" so that CUE can pick up the new ip address ? i heard we need to do 2 times due to the bug in CUE , is that true? tks K From: khaled Saholy To: Karen Johnson ; CCIE Study Sent: Sunday, June 30, 2013 2:31:22 PM Subject: RE: [OSL | CCIE_Voice] OWLE load from proctorlab Hi Karen, You can use the other loopback 1 address (10.10.115.0/24) . The problem is related to the mask. int lo 1 ip add 10.10.115.1 255.255.255.0 ip ospf net point-to-po int ser 0/0 ip unnum lo 1 service-modul ip add 10.10.115.2 255.255.255.0 service-module ip default-gateway 10.10.115.1 no sh ip route 10.10.115.2 255.255.255.255 ser0/0 Regards. Khaled Date: Sun, 30 Jun 2013 12:52:56 -0700 From: karen.johnson...@yahoo.ca To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] OWLE load from proctorlab hi all, i load OWLE Wb 1 from proctorlab in my session. Here is config they load, but my CUE is not reachable from HQ and other site. (however is reachble to SC only) . is there tshoot they inject or what i miss here? --- interface Loopback0 ip address 10.10.110.3 255.255.255.255 ip ospf network point-to-point end interface Service-Engine0/0 ip unnumbered Loopback0 service-module ip address 10.10.110.253 255.255.255.0 service-module ip default-gateway 10.10.110.3 end ip route 10.10.110.253 255.255.255.255 Service-Engine0/0 ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] OWLE load from proctorlab
hi khalid, do u mean when i change mask of loopback 0 , it will fix the issue too ? - what is the right procedure to do after change the ip address os service-engine 0/0 do i need to do "ser ser 0/0 reload" or "ser ser 0/0 reset" so that CUE can pick up the new ip address ? i heard we need to do 2 times due to the bug in CUE , is that true? tks K From: khaled Saholy To: Karen Johnson ; CCIE Study Sent: Sunday, June 30, 2013 2:31:22 PM Subject: RE: [OSL | CCIE_Voice] OWLE load from proctorlab Hi Karen, You can use the other loopback 1 address (10.10.115.0/24) . The problem is related to the mask. int lo 1 ip add 10.10.115.1 255.255.255.0 ip ospf net point-to-po int ser 0/0 ip unnum lo 1 service-modul ip add 10.10.115.2 255.255.255.0 service-module ip default-gateway 10.10.115.1 no sh ip route 10.10.115.2 255.255.255.255 ser0/0 Regards. Khaled Date: Sun, 30 Jun 2013 12:52:56 -0700 From: karen.johnson...@yahoo.ca To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] OWLE load from proctorlab hi all, i load OWLE Wb 1 from proctorlab in my session. Here is config they load, but my CUE is not reachable from HQ and other site. (however is reachble to SC only) . is there tshoot they inject or what i miss here? --- interface Loopback0 ip address 10.10.110.3 255.255.255.255 ip ospf network point-to-point end interface Service-Engine0/0 ip unnumbered Loopback0 service-module ip address 10.10.110.253 255.255.255.0 service-module ip default-gateway 10.10.110.3 end ip route 10.10.110.253 255.255.255.255 Service-Engine0/0 ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] OWLE load from proctorlab
Hi Karen, You can use the other loopback 1 address (10.10.115.0/24) . The problem is related to the mask. int lo 1 ip add 10.10.115.1 255.255.255.0 ip ospf net point-to-po int ser 0/0 ip unnum lo 1 service-modul ip add 10.10.115.2 255.255.255.0 service-module ip default-gateway 10.10.115.1 no sh ip route 10.10.115.2 255.255.255.255 ser0/0 Regards. Khaled Date: Sun, 30 Jun 2013 12:52:56 -0700 From: karen.johnson...@yahoo.ca To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] OWLE load from proctorlab hi all, i load OWLE Wb 1 from proctorlab in my session. Here is config they load, but my CUE is not reachable from HQ and other site. (however is reachble to SC only) . is there tshoot they inject or what i miss here? --- interface Loopback0 ip address 10.10.110.3 255.255.255.255 ip ospf network point-to-point end interface Service-Engine0/0 ip unnumbered Loopback0 service-module ip address 10.10.110.253 255.255.255.0 service-module ip default-gateway 10.10.110.3 end ip route 10.10.110.253 255.255.255.255 Service-Engine0/0 ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] OWLE load from proctorlab
hi all, i load OWLE Wb 1 from proctorlab in my session. Here is config they load, but my CUE is not reachable from HQ and other site. (however is reachble to SC only) . is there tshoot they inject or what i miss here? --- interface Loopback0 ip address 10.10.110.3 255.255.255.255 ip ospf network point-to-point end interface Service-Engine0/0 ip unnumbered Loopback0 service-module ip address 10.10.110.253 255.255.255.0 service-module ip default-gateway 10.10.110.3 end ip route 10.10.110.253 255.255.255.255 Service-Engine0/0___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com