Re: [OSL | CCIE_Voice] QOS marking on the router
Service Policies only queue and mark on the outbound, on the inbound they can only mark... (there are no input queues on a router...) Jonathan On Fri, Mar 28, 2008 at 4:44 PM, jason sung <[EMAIL PROTECTED]> wrote: > Thanks JD. > > I think you are correct. I keep forgetting this basic logic. I was jotting > down small tips to read during the flight. > > > CUE works the same. > > > On Fri, Mar 28, 2008 at 3:37 PM, Devildoc <[EMAIL PROTECTED]> wrote: > > > > > If you mark the control traffic comming from the LAN (i.e. Cat6500 > switch), then you'll need to apply the policy on the FastEthernet trunk in > the inbound direction on the router. When you apply a policy to an > interface, it is from the perspective of the router that the policy is being > serviced. In this case, the router sees the traffics comming into it, so it > must be applied on the inbound. > > > > JD > > > > > > > > > Date: Thu, 27 Mar 2008 21:50:12 -0500 > > From: [EMAIL PROTECTED] > > To: ccie_voice@onlinestudylist.com > > Subject: [OSL | CCIE_Voice] QOS marking on the router > > > > > > > > If I am trying to mark my control traffic on the router. Do I apply the > policymap to inbound or oubound side of the fastEthernet. > > > > I think outbound but I have heard people say inbound. > > > Watch "Cause Effect," a show about real people making a real difference. > Learn more. > >
Re: [OSL | CCIE_Voice] QOS marking on the router
Thanks JD. I think you are correct. I keep forgetting this basic logic. I was jotting down small tips to read during the flight. CUE works the same. On Fri, Mar 28, 2008 at 3:37 PM, Devildoc <[EMAIL PROTECTED]> wrote: > If you mark the control traffic comming from the LAN (i.e. Cat6500 > switch), then you'll need to apply the policy on the FastEthernet trunk in > the inbound direction on the router. When you apply a policy to an > interface, it is from the perspective of the router that the policy is being > serviced. In this case, the router sees the traffics comming into it, so it > must be applied on the inbound. > > JD > > > -- > Date: Thu, 27 Mar 2008 21:50:12 -0500 > From: [EMAIL PROTECTED] > To: ccie_voice@onlinestudylist.com > Subject: [OSL | CCIE_Voice] QOS marking on the router > > If I am trying to mark my control traffic on the router. Do I apply the > policymap to inbound or oubound side of the fastEthernet. > > I think outbound but I have heard people say inbound. > > > -- > Watch "Cause Effect," a show about real people making a real difference. Learn > more. <http://im.live.com/Messenger/IM/MTV/?source=text_watchcause> >
Re: [OSL | CCIE_Voice] QOS marking on the router
If you mark the control traffic comming from the LAN (i.e. Cat6500 switch), then you'll need to apply the policy on the FastEthernet trunk in the inbound direction on the router. When you apply a policy to an interface, it is from the perspective of the router that the policy is being serviced. In this case, the router sees the traffics comming into it, so it must be applied on the inbound. JD Date: Thu, 27 Mar 2008 21:50:12 -0500From: [EMAIL PROTECTED]: [EMAIL PROTECTED]: [OSL | CCIE_Voice] QOS marking on the router If I am trying to mark my control traffic on the router. Do I apply the policymap to inbound or oubound side of the fastEthernet. I think outbound but I have heard people say inbound. _ Watch “Cause Effect,” a show about real people making a real difference. Learn more. http://im.live.com/Messenger/IM/MTV/?source=text_watchcause
[OSL | CCIE_Voice] QOS marking on the router
If I am trying to mark my control traffic on the router. Do I apply the policymap to inbound or oubound side of the fastEthernet. I think outbound but I have heard people say inbound.