Re: [OSL | CCIE_Voice] Vol 2 Wb lab 6 ---- HQ call BR-2 CUE failed
uncheck the farend under GK gateway. On 3/15/2011 9:32 PM, Erwan Erwan wrote: hi all, I am practicing WB lab 6 , that use Gatekeeper for call from HQ (UCM) to BR-2 (CME) - call from HQ-- 5001 to 3001 -- Br-2 and vice versa (thru Gatekeeper) , 4 digit ext works fine - call from HQ to CUE pilot point (3600) (thru Gatekeeper) in Br-2 also work fine - call to BR-2 (3001) phone from PSTN also hit the CUE and I can leave the message Issue = however when I call from HQ to 3001 in BR-2 and I did not pick up the 3001, it supposed to transfer to CUE (3600) so that I can leave message , but instead I heard the busy tone. * I suspect the BR-2 transcode is not triggering ,however *sh sccp* it said transcode register OK config = telephony-service privacy off sdspfarm units 1 sdspfarm transcode sessions 3 sdspfarm tag 1 sc-xcode voicemail 3600 ephone-dn 1 octo-line number 3001 no-reg both call-forward busy 3600 call-forward noan 3600 timeout 20 --- Is there any other possibility I need to check ? Thanks ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Vol 2 Wb lab 6 ---- HQ call BR-2 CUE failed
Hi Erwan, Did you follow the instruction on the WB completely? Or you modified the question? The WB is requested a UCME integration with CUC with SIP, not CUE, and user mailbox should be located on CUC not CUE. You need a sip dialpeer to point to CUC with some additional configuration. So, can confirm this is a UCME + CUE or UCME + CUC ? Thanks Shingei. On Wed, Mar 16, 2011 at 2:30 PM, Shrini linuxbos...@gmail.com wrote: uncheck the farend under GK gateway. On 3/15/2011 9:32 PM, Erwan Erwan wrote: hi all, I am practicing WB lab 6 , that use Gatekeeper for call from HQ (UCM) to BR-2 (CME) - call from HQ-- 5001 to 3001 -- Br-2 and vice versa (thru Gatekeeper) , 4 digit ext works fine - call from HQ to CUE pilot point (3600) (thru Gatekeeper) in Br-2 also work fine - call to BR-2 (3001) phone from PSTN also hit the CUE and I can leave the message Issue = however when I call from HQ to 3001 in BR-2 and I did not pick up the 3001, it supposed to transfer to CUE (3600) so that I can leave message , but instead I heard the busy tone. * I suspect the BR-2 transcode is not triggering ,however *sh sccp* it said transcode register OK config = telephony-service privacy off sdspfarm units 1 sdspfarm transcode sessions 3 sdspfarm tag 1 sc-xcode voicemail 3600 ephone-dn 1 octo-line number 3001 no-reg both call-forward busy 3600 call-forward noan 3600 timeout 20 --- Is there any other possibility I need to check ? Thanks ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Vol 2 Wb lab 6 ---- HQ call BR-2 CUE failed
I refer to the Guide, it is CUE and dialpeer point to CUE 3600 --- On Wed, 3/16/11, ShinGei Yong shingei.y...@gmail.com wrote: From: ShinGei Yong shingei.y...@gmail.com Subject: Re: [OSL | CCIE_Voice] Vol 2 Wb lab 6 HQ call BR-2 CUE failed To: Erwan Erwan e_er...@yahoo.com, ccie_voice@onlinestudylist.com Received: Wednesday, March 16, 2011, 4:20 PM Hi Erwan, Did you follow the instruction on the WB completely? Or you modified the question? The WB is requested a UCME integration with CUC with SIP, not CUE, and user mailbox should be located on CUC not CUE. You need a sip dialpeer to point to CUC with some additional configuration. So, can confirm this is a UCME + CUE or UCME + CUC ? Thanks Shingei. On Wed, Mar 16, 2011 at 2:30 PM, Shrini linuxbos...@gmail.com wrote: uncheck the farend under GK gateway. On 3/15/2011 9:32 PM, Erwan Erwan wrote: hi all, I am practicing WB lab 6 , that use Gatekeeper for call from HQ (UCM) to BR-2 (CME) - call from HQ-- 5001 to 3001 -- Br-2 and vice versa (thru Gatekeeper) , 4 digit ext works fine - call from HQ to CUE pilot point (3600) (thru Gatekeeper) in Br-2 also work fine - call to BR-2 (3001) phone from PSTN also hit the CUE and I can leave the message Issue = however when I call from HQ to 3001 in BR-2 and I did not pick up the 3001, it supposed to transfer to CUE (3600) so that I can leave message , but instead I heard the busy tone. * I suspect the BR-2 transcode is not triggering ,however sh sccp it said transcode register OK config = telephony-service privacy off sdspfarm units 1 sdspfarm transcode sessions 3 sdspfarm tag 1 sc-xcode voicemail 3600 ephone-dn 1 octo-line number 3001 no-reg both call-forward busy 3600 call-forward noan 3600 timeout 20 --- Is there any other possibility I need to check ? Thanks ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Vol 2 Wb lab 6 ---- HQ call BR-2 CUE failed
Hi Erwan, I hope we are referring to the same WB. The question is asked: Question 6.2: Integrate UCME with Unity Connection using SIP and create mailbox for br2 phone 1 and phone 2.(4pts) Yes, the dp pointed to 3600,but did you look at the address? is that 210.13 or 202.2 Can tell me which page of the doc you are looking at? Shingei On Wed, Mar 16, 2011 at 11:08 PM, Erwan Erwan e_er...@yahoo.com wrote: I refer to the Guide, it is CUE and dialpeer point to CUE 3600 --- On *Wed, 3/16/11, ShinGei Yong shingei.y...@gmail.com* wrote: From: ShinGei Yong shingei.y...@gmail.com Subject: Re: [OSL | CCIE_Voice] Vol 2 Wb lab 6 HQ call BR-2 CUE failed To: Erwan Erwan e_er...@yahoo.com, ccie_voice@onlinestudylist.com Received: Wednesday, March 16, 2011, 4:20 PM Hi Erwan, Did you follow the instruction on the WB completely? Or you modified the question? The WB is requested a UCME integration with CUC with SIP, not CUE, and user mailbox should be located on CUC not CUE. You need a sip dialpeer to point to CUC with some additional configuration. So, can confirm this is a UCME + CUE or UCME + CUC ? Thanks Shingei. On Wed, Mar 16, 2011 at 2:30 PM, Shrini linuxbos...@gmail.comhttp://ca.mc1205.mail.yahoo.com/mc/compose?to=linuxbos...@gmail.com wrote: uncheck the farend under GK gateway. On 3/15/2011 9:32 PM, Erwan Erwan wrote: hi all, I am practicing WB lab 6 , that use Gatekeeper for call from HQ (UCM) to BR-2 (CME) - call from HQ-- 5001 to 3001 -- Br-2 and vice versa (thru Gatekeeper) , 4 digit ext works fine - call from HQ to CUE pilot point (3600) (thru Gatekeeper) in Br-2 also work fine - call to BR-2 (3001) phone from PSTN also hit the CUE and I can leave the message Issue = however when I call from HQ to 3001 in BR-2 and I did not pick up the 3001, it supposed to transfer to CUE (3600) so that I can leave message , but instead I heard the busy tone. * I suspect the BR-2 transcode is not triggering ,however *sh sccp* it said transcode register OK config = telephony-service privacy off sdspfarm units 1 sdspfarm transcode sessions 3 sdspfarm tag 1 sc-xcode voicemail 3600 ephone-dn 1 octo-line number 3001 no-reg both call-forward busy 3600 call-forward noan 3600 timeout 20 --- Is there any other possibility I need to check ? Thanks ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] Vol 2 Wb lab 6 ---- HQ call BR-2 CUE failed
hi all, I am practicing WB lab 6 , that use Gatekeeper for call from HQ (UCM) to BR-2 (CME) - call from HQ-- 5001 to 3001 -- Br-2 and vice versa (thru Gatekeeper) , 4 digit ext works fine - call from HQ to CUE pilot point (3600) (thru Gatekeeper) in Br-2 also work fine - call to BR-2 (3001) phone from PSTN also hit the CUE and I can leave the message Issue = however when I call from HQ to 3001 in BR-2 and I did not pick up the 3001, it supposed to transfer to CUE (3600) so that I can leave message , but instead I heard the busy tone. * I suspect the BR-2 transcode is not triggering ,however sh sccp it said transcode register OK config = telephony-service privacy off sdspfarm units 1 sdspfarm transcode sessions 3 sdspfarm tag 1 sc-xcode voicemail 3600 ephone-dn 1 octo-line number 3001 no-reg both call-forward busy 3600 call-forward noan 3600 timeout 20 --- Is there any other possibility I need to check ? Thanks ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Vol 2 Wb lab 6 ---- HQ call BR-2 CUE failed
What's under voice service voip? duy ccie #27737 voice tmobile g2 On Mar 15, 2011 11:59 PM, Erwan Erwan e_er...@yahoo.com wrote: hi all, I am practicing WB lab 6 , that use Gatekeeper for call from HQ (UCM) to BR-2 (CME) - call from HQ-- 5001 to 3001 -- Br-2 and vice versa (thru Gatekeeper) , 4 digit ext works fine - call from HQ to CUE pilot point (3600) (thru Gatekeeper) in Br-2 also work fine - call to BR-2 (3001) phone from PSTN also hit the CUE and I can leave the message Issue = however when I call from HQ to 3001 in BR-2 and I did not pick up the 3001, it supposed to transfer to CUE (3600) so that I can leave message , but instead I heard the busy tone. * I suspect the BR-2 transcode is not triggering ,however sh sccp it said transcode register OK config = telephony-service privacy off sdspfarm units 1 sdspfarm transcode sessions 3 sdspfarm tag 1 sc-xcode voicemail 3600 ephone-dn 1 octo-line number 3001 no-reg both call-forward busy 3600 call-forward noan 3600 timeout 20 --- Is there any other possibility I need to check ? Thanks ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
