Re: [OSL | CCIE_Voice] Vol2 Lab10 Q 4.6 - Access VM from the phone
Hi Roger, I tried MIDLet and I get this error Add failed. [25189] Vendor is required for Java MIDlet service. Can you confirm it would work with version 7.0.1 on both cucm ana unity. Thanks, DA On 11/10/10, Roger Carpio wrote: > David, > > Is the Service Category * setup as Java MIDLet or XML Service? > > Regards, > Roger Carpio. > > On Wed, Nov 10, 2010 at 9:26 AM, David A wrote: > >> Thanks Roger, >> >> I followed the document. When I test the url >> >> http://x.x.x.x/midlets/VisualVoicemail/VisualVoicemail.jad >> >> with my unity connection ip addr. I get an error -NOT Found. Do I need >> a seperate license? >> >> Thanks for the help. >> >> DA >> >> On 11/10/10, Roger Carpio wrote: >> > Hello David, >> > >> > I think this might help you accomplish your goal: >> > >> > >> http://www.cisco.com/en/US/docs/voice_ip_comm/cupa/visual_voicemail/7.0/english/install/guide/install_phones.html#wp1056189 >> > >> > Regards, >> > Roger Carpio. >> > >> > On Wed, Nov 10, 2010 at 8:25 AM, David A wrote: >> > >> >> Hi Tamer, >> >> >> >> I am able to access voicemail using messages button. I was trying to >> >> configure the services button similar to CUE voiceview but on Unity >> >> Connection >> >> >> >> Thanks, >> >> DA >> >> >> >> On 11/10/10, rsmail...@solcon.nl wrote: >> >> > Tamer, >> >> > >> >> > try dialing the pilot point directly. >> >> > for example dial 5600 (VM pilot) >> >> > Do you get the unity prompt or not ? >> >> > then check the VM pilot and VM profile settings. >> >> > make sure the phone uses the VM profile. >> >> > >> >> > also if you press the voicemail button, and nothing happens. >> >> > the service doesn't exist or no VM profile configured for that phone. >> >> > >> >> > regards, Ron >> >> > >> >> > >> >> >> Hi Tamer, >> >> >> >> >> >> Any idea what the service url is to configure on CUCM for Voice View >> >> >> Access on Unity Connection >> >> >> >> >> >> >> >> >> Thanks, >> >> >> DA >> >> >> >> >> >> On 11/10/10, Tamer Ismail wrote: >> >> >>> David, >> >> >>> Yes it should works. >> >> >>> Check if you have voicemail service in phone services tab, and >> >> >>> check >> >> >>> what is >> >> >>> your default voicemail profile. >> >> >>> >> >> >>> Tamer, >> >> >>> >> >> >>> -Original Message- >> >> >>> From: ccie_voice-boun...@onlinestudylist.com >> >> >>> [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of David >> A >> >> >>> Sent: Wednesday, November 10, 2010 6:15 AM >> >> >>> To: ccie_voice@onlinestudylist.com >> >> >>> Subject: [OSL | CCIE_Voice] Vol2 Lab10 Q 4.6 - Access VM from the >> >> >>> phone >> >> >>> >> >> >>> Hi All, >> >> >>> >> >> >>> The question requires that all VM users should be able to log onto >> >> >>> Voicemail system via the services button on phone. >> >> >>> >> >> >>> This works fine for CUE access. >> >> >>> >> >> >>> Can it be done on the Unity Connection. I couldnt find anything. Is >> it >> >> >>> possible? >> >> >>> >> >> >>> >> >> >>> Thanks, >> >> >>> DA >> >> >>> ___ >> >> >>> For more information regarding industry leading CCIE Lab training, >> >> >>> please >> >> >>> visit www.ipexpert.com >> >> >>> >> >> >>> >> >> >> ___ >> >> >> For more information regarding industry leading CCIE Lab training, >> >> please >> >> >> visit www.ipexpert.com >> >> >> >> >> > >> >> > >> >> > >> >> ___ >> >> For more information regarding industry leading CCIE Lab training, >> please >> >> visit www.ipexpert.com >> >> >> > >> > ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Vol2 Lab10 Q 4.6 - Access VM from the phone
David, Is the Service Category * setup as Java MIDLet or XML Service? Regards, Roger Carpio. On Wed, Nov 10, 2010 at 9:26 AM, David A wrote: > Thanks Roger, > > I followed the document. When I test the url > > http://x.x.x.x/midlets/VisualVoicemail/VisualVoicemail.jad > > with my unity connection ip addr. I get an error -NOT Found. Do I need > a seperate license? > > Thanks for the help. > > DA > > On 11/10/10, Roger Carpio wrote: > > Hello David, > > > > I think this might help you accomplish your goal: > > > > > http://www.cisco.com/en/US/docs/voice_ip_comm/cupa/visual_voicemail/7.0/english/install/guide/install_phones.html#wp1056189 > > > > Regards, > > Roger Carpio. > > > > On Wed, Nov 10, 2010 at 8:25 AM, David A wrote: > > > >> Hi Tamer, > >> > >> I am able to access voicemail using messages button. I was trying to > >> configure the services button similar to CUE voiceview but on Unity > >> Connection > >> > >> Thanks, > >> DA > >> > >> On 11/10/10, rsmail...@solcon.nl wrote: > >> > Tamer, > >> > > >> > try dialing the pilot point directly. > >> > for example dial 5600 (VM pilot) > >> > Do you get the unity prompt or not ? > >> > then check the VM pilot and VM profile settings. > >> > make sure the phone uses the VM profile. > >> > > >> > also if you press the voicemail button, and nothing happens. > >> > the service doesn't exist or no VM profile configured for that phone. > >> > > >> > regards, Ron > >> > > >> > > >> >> Hi Tamer, > >> >> > >> >> Any idea what the service url is to configure on CUCM for Voice View > >> >> Access on Unity Connection > >> >> > >> >> > >> >> Thanks, > >> >> DA > >> >> > >> >> On 11/10/10, Tamer Ismail wrote: > >> >>> David, > >> >>> Yes it should works. > >> >>> Check if you have voicemail service in phone services tab, and check > >> >>> what is > >> >>> your default voicemail profile. > >> >>> > >> >>> Tamer, > >> >>> > >> >>> -Original Message- > >> >>> From: ccie_voice-boun...@onlinestudylist.com > >> >>> [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of David > A > >> >>> Sent: Wednesday, November 10, 2010 6:15 AM > >> >>> To: ccie_voice@onlinestudylist.com > >> >>> Subject: [OSL | CCIE_Voice] Vol2 Lab10 Q 4.6 - Access VM from the > >> >>> phone > >> >>> > >> >>> Hi All, > >> >>> > >> >>> The question requires that all VM users should be able to log onto > >> >>> Voicemail system via the services button on phone. > >> >>> > >> >>> This works fine for CUE access. > >> >>> > >> >>> Can it be done on the Unity Connection. I couldnt find anything. Is > it > >> >>> possible? > >> >>> > >> >>> > >> >>> Thanks, > >> >>> DA > >> >>> ___ > >> >>> For more information regarding industry leading CCIE Lab training, > >> >>> please > >> >>> visit www.ipexpert.com > >> >>> > >> >>> > >> >> ___ > >> >> For more information regarding industry leading CCIE Lab training, > >> please > >> >> visit www.ipexpert.com > >> >> > >> > > >> > > >> > > >> ___ > >> For more information regarding industry leading CCIE Lab training, > please > >> visit www.ipexpert.com > >> > > > ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Vol2 Lab10 Q 4.6 - Access VM from the phone
Just found the release notes for visual voicemail and it says Unity Connection 7.1. I guess it wont be on the test then. Wonder why IPX workbook is not clear. Thanks, DA On 11/10/10, David A wrote: > Thanks Roger, > > I followed the document. When I test the url > > http://x.x.x.x/midlets/VisualVoicemail/VisualVoicemail.jad > > with my unity connection ip addr. I get an error -NOT Found. Do I need > a seperate license? > > Thanks for the help. > > DA > > On 11/10/10, Roger Carpio wrote: >> Hello David, >> >> I think this might help you accomplish your goal: >> >> http://www.cisco.com/en/US/docs/voice_ip_comm/cupa/visual_voicemail/7.0/english/install/guide/install_phones.html#wp1056189 >> >> Regards, >> Roger Carpio. >> >> On Wed, Nov 10, 2010 at 8:25 AM, David A wrote: >> >>> Hi Tamer, >>> >>> I am able to access voicemail using messages button. I was trying to >>> configure the services button similar to CUE voiceview but on Unity >>> Connection >>> >>> Thanks, >>> DA >>> >>> On 11/10/10, rsmail...@solcon.nl wrote: >>> > Tamer, >>> > >>> > try dialing the pilot point directly. >>> > for example dial 5600 (VM pilot) >>> > Do you get the unity prompt or not ? >>> > then check the VM pilot and VM profile settings. >>> > make sure the phone uses the VM profile. >>> > >>> > also if you press the voicemail button, and nothing happens. >>> > the service doesn't exist or no VM profile configured for that phone. >>> > >>> > regards, Ron >>> > >>> > >>> >> Hi Tamer, >>> >> >>> >> Any idea what the service url is to configure on CUCM for Voice View >>> >> Access on Unity Connection >>> >> >>> >> >>> >> Thanks, >>> >> DA >>> >> >>> >> On 11/10/10, Tamer Ismail wrote: >>> >>> David, >>> >>> Yes it should works. >>> >>> Check if you have voicemail service in phone services tab, and check >>> >>> what is >>> >>> your default voicemail profile. >>> >>> >>> >>> Tamer, >>> >>> >>> >>> -Original Message- >>> >>> From: ccie_voice-boun...@onlinestudylist.com >>> >>> [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of David A >>> >>> Sent: Wednesday, November 10, 2010 6:15 AM >>> >>> To: ccie_voice@onlinestudylist.com >>> >>> Subject: [OSL | CCIE_Voice] Vol2 Lab10 Q 4.6 - Access VM from the >>> >>> phone >>> >>> >>> >>> Hi All, >>> >>> >>> >>> The question requires that all VM users should be able to log onto >>> >>> Voicemail system via the services button on phone. >>> >>> >>> >>> This works fine for CUE access. >>> >>> >>> >>> Can it be done on the Unity Connection. I couldnt find anything. Is >>> >>> it >>> >>> possible? >>> >>> >>> >>> >>> >>> Thanks, >>> >>> DA >>> >>> ___ >>> >>> For more information regarding industry leading CCIE Lab training, >>> >>> please >>> >>> visit www.ipexpert.com >>> >>> >>> >>> >>> >> ___ >>> >> For more information regarding industry leading CCIE Lab training, >>> please >>> >> visit www.ipexpert.com >>> >> >>> > >>> > >>> > >>> ___ >>> For more information regarding industry leading CCIE Lab training, >>> please >>> visit www.ipexpert.com >>> >> > ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Vol2 Lab10 Q 4.6 - Access VM from the phone
Thanks Roger, I followed the document. When I test the url http://x.x.x.x/midlets/VisualVoicemail/VisualVoicemail.jad with my unity connection ip addr. I get an error -NOT Found. Do I need a seperate license? Thanks for the help. DA On 11/10/10, Roger Carpio wrote: > Hello David, > > I think this might help you accomplish your goal: > > http://www.cisco.com/en/US/docs/voice_ip_comm/cupa/visual_voicemail/7.0/english/install/guide/install_phones.html#wp1056189 > > Regards, > Roger Carpio. > > On Wed, Nov 10, 2010 at 8:25 AM, David A wrote: > >> Hi Tamer, >> >> I am able to access voicemail using messages button. I was trying to >> configure the services button similar to CUE voiceview but on Unity >> Connection >> >> Thanks, >> DA >> >> On 11/10/10, rsmail...@solcon.nl wrote: >> > Tamer, >> > >> > try dialing the pilot point directly. >> > for example dial 5600 (VM pilot) >> > Do you get the unity prompt or not ? >> > then check the VM pilot and VM profile settings. >> > make sure the phone uses the VM profile. >> > >> > also if you press the voicemail button, and nothing happens. >> > the service doesn't exist or no VM profile configured for that phone. >> > >> > regards, Ron >> > >> > >> >> Hi Tamer, >> >> >> >> Any idea what the service url is to configure on CUCM for Voice View >> >> Access on Unity Connection >> >> >> >> >> >> Thanks, >> >> DA >> >> >> >> On 11/10/10, Tamer Ismail wrote: >> >>> David, >> >>> Yes it should works. >> >>> Check if you have voicemail service in phone services tab, and check >> >>> what is >> >>> your default voicemail profile. >> >>> >> >>> Tamer, >> >>> >> >>> -Original Message- >> >>> From: ccie_voice-boun...@onlinestudylist.com >> >>> [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of David A >> >>> Sent: Wednesday, November 10, 2010 6:15 AM >> >>> To: ccie_voice@onlinestudylist.com >> >>> Subject: [OSL | CCIE_Voice] Vol2 Lab10 Q 4.6 - Access VM from the >> >>> phone >> >>> >> >>> Hi All, >> >>> >> >>> The question requires that all VM users should be able to log onto >> >>> Voicemail system via the services button on phone. >> >>> >> >>> This works fine for CUE access. >> >>> >> >>> Can it be done on the Unity Connection. I couldnt find anything. Is it >> >>> possible? >> >>> >> >>> >> >>> Thanks, >> >>> DA >> >>> ___ >> >>> For more information regarding industry leading CCIE Lab training, >> >>> please >> >>> visit www.ipexpert.com >> >>> >> >>> >> >> ___ >> >> For more information regarding industry leading CCIE Lab training, >> please >> >> visit www.ipexpert.com >> >> >> > >> > >> > >> ___ >> For more information regarding industry leading CCIE Lab training, please >> visit www.ipexpert.com >> > ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Vol2 Lab10 Q 4.6 - Access VM from the phone
Hello David, I think this might help you accomplish your goal: http://www.cisco.com/en/US/docs/voice_ip_comm/cupa/visual_voicemail/7.0/english/install/guide/install_phones.html#wp1056189 Regards, Roger Carpio. On Wed, Nov 10, 2010 at 8:25 AM, David A wrote: > Hi Tamer, > > I am able to access voicemail using messages button. I was trying to > configure the services button similar to CUE voiceview but on Unity > Connection > > Thanks, > DA > > On 11/10/10, rsmail...@solcon.nl wrote: > > Tamer, > > > > try dialing the pilot point directly. > > for example dial 5600 (VM pilot) > > Do you get the unity prompt or not ? > > then check the VM pilot and VM profile settings. > > make sure the phone uses the VM profile. > > > > also if you press the voicemail button, and nothing happens. > > the service doesn't exist or no VM profile configured for that phone. > > > > regards, Ron > > > > > >> Hi Tamer, > >> > >> Any idea what the service url is to configure on CUCM for Voice View > >> Access on Unity Connection > >> > >> > >> Thanks, > >> DA > >> > >> On 11/10/10, Tamer Ismail wrote: > >>> David, > >>> Yes it should works. > >>> Check if you have voicemail service in phone services tab, and check > >>> what is > >>> your default voicemail profile. > >>> > >>> Tamer, > >>> > >>> -----Original Message- > >>> From: ccie_voice-boun...@onlinestudylist.com > >>> [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of David A > >>> Sent: Wednesday, November 10, 2010 6:15 AM > >>> To: ccie_voice@onlinestudylist.com > >>> Subject: [OSL | CCIE_Voice] Vol2 Lab10 Q 4.6 - Access VM from the phone > >>> > >>> Hi All, > >>> > >>> The question requires that all VM users should be able to log onto > >>> Voicemail system via the services button on phone. > >>> > >>> This works fine for CUE access. > >>> > >>> Can it be done on the Unity Connection. I couldnt find anything. Is it > >>> possible? > >>> > >>> > >>> Thanks, > >>> DA > >>> ___ > >>> For more information regarding industry leading CCIE Lab training, > >>> please > >>> visit www.ipexpert.com > >>> > >>> > >> ___ > >> For more information regarding industry leading CCIE Lab training, > please > >> visit www.ipexpert.com > >> > > > > > > > ___ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Vol2 Lab10 Q 4.6 - Access VM from the phone
Hi Tamer, I am able to access voicemail using messages button. I was trying to configure the services button similar to CUE voiceview but on Unity Connection Thanks, DA On 11/10/10, rsmail...@solcon.nl wrote: > Tamer, > > try dialing the pilot point directly. > for example dial 5600 (VM pilot) > Do you get the unity prompt or not ? > then check the VM pilot and VM profile settings. > make sure the phone uses the VM profile. > > also if you press the voicemail button, and nothing happens. > the service doesn't exist or no VM profile configured for that phone. > > regards, Ron > > >> Hi Tamer, >> >> Any idea what the service url is to configure on CUCM for Voice View >> Access on Unity Connection >> >> >> Thanks, >> DA >> >> On 11/10/10, Tamer Ismail wrote: >>> David, >>> Yes it should works. >>> Check if you have voicemail service in phone services tab, and check >>> what is >>> your default voicemail profile. >>> >>> Tamer, >>> >>> -Original Message- >>> From: ccie_voice-boun...@onlinestudylist.com >>> [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of David A >>> Sent: Wednesday, November 10, 2010 6:15 AM >>> To: ccie_voice@onlinestudylist.com >>> Subject: [OSL | CCIE_Voice] Vol2 Lab10 Q 4.6 - Access VM from the phone >>> >>> Hi All, >>> >>> The question requires that all VM users should be able to log onto >>> Voicemail system via the services button on phone. >>> >>> This works fine for CUE access. >>> >>> Can it be done on the Unity Connection. I couldnt find anything. Is it >>> possible? >>> >>> >>> Thanks, >>> DA >>> ___ >>> For more information regarding industry leading CCIE Lab training, >>> please >>> visit www.ipexpert.com >>> >>> >> ___ >> For more information regarding industry leading CCIE Lab training, please >> visit www.ipexpert.com >> > > > ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Vol2 Lab10 Q 4.6 - Access VM from the phone
Tamer, try dialing the pilot point directly. for example dial 5600 (VM pilot) Do you get the unity prompt or not ? then check the VM pilot and VM profile settings. make sure the phone uses the VM profile. also if you press the voicemail button, and nothing happens. the service doesn't exist or no VM profile configured for that phone. regards, Ron > Hi Tamer, > > Any idea what the service url is to configure on CUCM for Voice View > Access on Unity Connection > > > Thanks, > DA > > On 11/10/10, Tamer Ismail wrote: >> David, >> Yes it should works. >> Check if you have voicemail service in phone services tab, and check >> what is >> your default voicemail profile. >> >> Tamer, >> >> -Original Message- >> From: ccie_voice-boun...@onlinestudylist.com >> [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of David A >> Sent: Wednesday, November 10, 2010 6:15 AM >> To: ccie_voice@onlinestudylist.com >> Subject: [OSL | CCIE_Voice] Vol2 Lab10 Q 4.6 - Access VM from the phone >> >> Hi All, >> >> The question requires that all VM users should be able to log onto >> Voicemail system via the services button on phone. >> >> This works fine for CUE access. >> >> Can it be done on the Unity Connection. I couldnt find anything. Is it >> possible? >> >> >> Thanks, >> DA >> ___ >> For more information regarding industry leading CCIE Lab training, >> please >> visit www.ipexpert.com >> >> > ___ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Vol2 Lab10 Q 4.6 - Access VM from the phone
David, It's not related to unity connection, it's enabling the massaging key to call default mail system. You should have the attach service to be able to use massage button. Tamer, -Original Message- From: David A [mailto:david.a...@gmail.com] Sent: Wednesday, November 10, 2010 4:08 PM To: Tamer Ismail Cc: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] Vol2 Lab10 Q 4.6 - Access VM from the phone Hi Tamer, Any idea what the service url is to configure on CUCM for Voice View Access on Unity Connection Thanks, DA On 11/10/10, Tamer Ismail wrote: > David, > Yes it should works. > Check if you have voicemail service in phone services tab, and check what is > your default voicemail profile. > > Tamer, > > -Original Message- > From: ccie_voice-boun...@onlinestudylist.com > [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of David A > Sent: Wednesday, November 10, 2010 6:15 AM > To: ccie_voice@onlinestudylist.com > Subject: [OSL | CCIE_Voice] Vol2 Lab10 Q 4.6 - Access VM from the phone > > Hi All, > > The question requires that all VM users should be able to log onto > Voicemail system via the services button on phone. > > This works fine for CUE access. > > Can it be done on the Unity Connection. I couldnt find anything. Is it > possible? > > > Thanks, > DA > ___ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > <>___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Vol2 Lab10 Q 4.6 - Access VM from the phone
Hi Tamer, Any idea what the service url is to configure on CUCM for Voice View Access on Unity Connection Thanks, DA On 11/10/10, Tamer Ismail wrote: > David, > Yes it should works. > Check if you have voicemail service in phone services tab, and check what is > your default voicemail profile. > > Tamer, > > -Original Message- > From: ccie_voice-boun...@onlinestudylist.com > [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of David A > Sent: Wednesday, November 10, 2010 6:15 AM > To: ccie_voice@onlinestudylist.com > Subject: [OSL | CCIE_Voice] Vol2 Lab10 Q 4.6 - Access VM from the phone > > Hi All, > > The question requires that all VM users should be able to log onto > Voicemail system via the services button on phone. > > This works fine for CUE access. > > Can it be done on the Unity Connection. I couldnt find anything. Is it > possible? > > > Thanks, > DA > ___ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Vol2 Lab10 Q 4.6 - Access VM from the phone
David, Yes it should works. Check if you have voicemail service in phone services tab, and check what is your default voicemail profile. Tamer, -Original Message- From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of David A Sent: Wednesday, November 10, 2010 6:15 AM To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] Vol2 Lab10 Q 4.6 - Access VM from the phone Hi All, The question requires that all VM users should be able to log onto Voicemail system via the services button on phone. This works fine for CUE access. Can it be done on the Unity Connection. I couldnt find anything. Is it possible? Thanks, DA ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] Vol2 Lab10 Q 4.6 - Access VM from the phone
Hi All, The question requires that all VM users should be able to log onto Voicemail system via the services button on phone. This works fine for CUE access. Can it be done on the Unity Connection. I couldnt find anything. Is it possible? Thanks, DA ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com