Pressing the ? Twice will in fact give u the results your looking for. The region setting on UCM will set the codec that u suoport during call setup on the phone and the system param settings for UCCX set the codec you support for call setup. Thus as long as you have overlapping or at least one of the same codecs supported on both sides of connection the call will be able to setup the rtp connection between each. Pressing ? twice onxe rtp session is established gives you the codec that was negotiated. Keep in mond that the codec will change as different prompts or MOH are transgressed between the UCM and UCCX server.
Thanks, Justin McIntyre ________________________________ This email and any files transmitted with it are confidential and are intended for the sole use of the individual to whom they are addressed. Black Box Corporation reserves the right to scan all e-mail traffic for restricted content and to monitor all e-mail in general. If you are not the intended recipient or you have received this email in error, any use, dissemination or forwarding of this email is strictly prohibited. If you have received this email in error, please notify the sender by replying to this email.
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
