RE: TCL Terminal
> -Original Message- > From: cctalk On Behalf Of Al Kossow via > cctalk > Sent: 25 November 2018 17:22 > To: cctalk@classiccmp.org > Subject: Re: TCL Terminal > > > > On 11/25/18 8:56 AM, Dave Wade via cctalk wrote: > > > I can't seem to get into ant set-up menus, and I am sure it used to > > show these, Does any one have any documents on these? > > try holding down the space bar on powerup > No > dumps of the firmware would be nice > I think that’s the only way I will find out if there is a setup menu. I am beginning to think it might be a dedicated function terminal with no config options. It does work as a terminal on but its not ANSI/VT. When I run EDIT on the VAX it goes into some graphics mode. I have put it on to my ToDo list but don't hold your breath. Dave G4UGM
Re: TCL Terminal
On 11/25/18 9:55 AM, Al Kossow via cctalk wrote: > 'TCL' are the initials of the person who created the first Ethernet > transceiver (Tat Lam). > > > https://books.google.com/books?id=ooBqdIXIqbwC=PA73=PA73 I note that the same section mentions Jim Theornton. I recall on a trip to CDC ARHOPS in Arden Hills, seeing a backhoe trenching around the employee parking lot. The path didn't make much sense, so I asked a co-worker about it. "Oh, that's Jim Thornton laying his coax loop."... --Chuck
Re: TCL Terminal
'TCL' are the initials of the person who created the first Ethernet transceiver (Tat Lam). https://books.google.com/books?id=ooBqdIXIqbwC=PA73=PA73 He also sold the first 10mbit transceiver and repeater. On 11/25/18 9:41 AM, Chuck Guzis via cctalk wrote: > Don't know the exact product, but TCL INc. was in Fremont, CA and was a > maker of various bits of LAN gear. > > --Chuck >
Re: TCL Terminal
Don't know the exact product, but TCL INc. was in Fremont, CA and was a maker of various bits of LAN gear. --Chuck
Re: TCL Terminal
On 11/25/18 9:22 AM, Al Kossow via cctalk wrote: > try holding down the space bar on powerup this also works to get into local test on the mtx 1483 i was able to get this to work with a Compaq 122-key kb but not with the 102-key telex kb I tried
Re: TCL Terminal
you accidentally included a pic of the memorex terminal as picture 1 so there isn't a picture of the back of the board. I'm assuming there is an AT keyboard connector on the TCL On 11/25/18 9:22 AM, Al Kossow via cctalk wrote: > > > On 11/25/18 8:56 AM, Dave Wade via cctalk wrote: > >> I can't seem to get into ant set-up menus, and I am sure it used to show >> these, Does any one have any documents on these? > > try holding down the space bar on powerup > > dumps of the firmware would be nice > >
Re: TCL Terminal
On 11/25/18 8:56 AM, Dave Wade via cctalk wrote: > I can't seem to get into ant set-up menus, and I am sure it used to show > these, Does any one have any documents on these? try holding down the space bar on powerup dumps of the firmware would be nice
TCL Terminal
Folks, While sorting through my pile of 3270 terminals I came across a little plastic box with 2 x 9-pin rs232, 1x25pin printer port and one VGA port. On taking the lid off it seems it's a terminal for NYCE made by TCL but I can find no info on the net. I put a few pics of it here:- https://1drv.ms/f/s!Ag4BJfE5B3onkY8FlfveCwr73J5HIw I can't seem to get into ant set-up menus, and I am sure it used to show these, Does any one have any documents on these? Searching on google is hampered by the fact there is a TCL language. Dave Wade G4UGM & EA7KAE