VAX & PDP-11 Stuff To Clean Out
I have the following 5-1/4" Drives that I would like to get rid of. These have all been working at one time or another, but I have no idea what condition they are in now. Maxtor EXT 4330 Seagate ST4766N Hitachi DK516-12 Maxtor XT-8760E Maxtor XT-4170E I also have the following QBUS cards to part with. Module Number Part# Description Form QBUS Extender D M7504 DEQNA Ethernet D M8043 DLV11 4xSLU D M8043 DLV11 4xSLU D M7941 DRV11 16 Bit Parallel D M8186 KDF11 11/23 CPU D M8186 KDF11 11/23 CPU D M8189 KDJ11 11/73 CPU D M8192-YB KDJ11 11/73 CPU D M8192-YB KDJ11 11/73 CPU D M8047 MXV11 ROM/RAM D M7555 RQDX3 D M8029 RXV21 RX02 Controller D M7646 TQK50 Tape Controller D M8044-DB Memory 16K 32K? D M8044-DE Memory 16K 32K? D DATARAM 63010 Q Camington CMX1651 Memory Q M7606-AF KA630 CPU Q M7620-AA KA650 CPU Q M7620-BA KA650 CPU Q M7164 KDA50 SDI Controller Q M7165 KDA50 SDI Controller Q M5976-AA KZQSA SCSI Controller Q M5976-AA KZQSA SCSI Controller Q M8067 Memory Q M7168 VCB02 Bit Map Q M7169 VCB02 Controller Q M7608-BP MS630BB 4-Meg Memory Q M7608-BP MS630BB 4-Meg Memory Q M7957 4xSLU Q SCD-RQD11/EC ESDI Controller Q All of these are FTAGH, but I wouldn't turn down a trade either. I'd be interested in drive sleds for my BA123 or a spare power supply, also for the BA123 or I'm always interested in M68K/M6809 stuff. I would prefer local pickup near Livermore, CA. I don't believe that the drives are shippable. Please contact me directly at
VAX & PDP-11 Stuff To Clean Out
Most of the items are spoken for but I still have the following: Caminton CMX1651 Memory M7606-AF KA630 CPU M7620-AA KA650 CPU M8067 Memory M7168 VCB02 Bit Map M7169 VCB02 Controller M7608-BP MS630BB 4-Meg Memory M7608-BP MS630BB 4-Meg Memory SCD-RQD11/EC ESDI Controller ...so, mainly the VAX stuff. Priority goes to local pickup. I've had all of these boards working at one time or another but I can't speak to their current status. David Coolbear da...@thecoolbears.org
Re: VAX & PDP-11 Stuff To Clean Out
Are you sure you won't ship the Maxtor ESDI drves? I have a microvax 2 here just crying out for them. Unfortunately CA is a five day drive away for me! Nigel ve3id On 06/11/2019 13:16, David Coolbear via cctech wrote: I have the following 5-1/4" Drives that I would like to get rid of. These have all been working at one time or another, but I have no idea what condition they are in now. Maxtor EXT 4330 Seagate ST4766N Hitachi DK516-12 Maxtor XT-8760E Maxtor XT-4170E I also have the following QBUS cards to part with. Module Number Part# Description Form QBUS Extender D M7504 DEQNA Ethernet D M8043 DLV11 4xSLU D M8043 DLV11 4xSLU D M7941 DRV11 16 Bit Parallel D M8186 KDF11 11/23 CPU D M8186 KDF11 11/23 CPU D M8189 KDJ11 11/73 CPU D M8192-YB KDJ11 11/73 CPU D M8192-YB KDJ11 11/73 CPU D M8047 MXV11 ROM/RAM D M7555 RQDX3 D M8029 RXV21 RX02 Controller D M7646 TQK50 Tape Controller D M8044-DB Memory 16K 32K? D M8044-DE Memory 16K 32K? D DATARAM 63010 Q Camington CMX1651 Memory Q M7606-AF KA630 CPU Q M7620-AA KA650 CPU Q M7620-BA KA650 CPU Q M7164 KDA50 SDI Controller Q M7165 KDA50 SDI Controller Q M5976-AA KZQSA SCSI Controller Q M5976-AA KZQSA SCSI Controller Q M8067 Memory Q M7168 VCB02 Bit Map Q M7169 VCB02 Controller Q M7608-BP MS630BB 4-Meg Memory Q M7608-BP MS630BB 4-Meg Memory Q M7957 4xSLU Q SCD-RQD11/EC ESDI Controller Q All of these are FTAGH, but I wouldn't turn down a trade either. I'd be interested in drive sleds for my BA123 or a spare power supply, also for the BA123 or I'm always interested in M68K/M6809 stuff. I would prefer local pickup near Livermore, CA. I don't believe that the drives are shippable. Please contact me directly at -- Nigel Johnson MSc., MIEEE VE3ID/G4AJQ/VA3MCU Amateur Radio, the origin of the open-source concept! You can reach me by voice on Skype: TILBURY2591 If time travel ever will be possible, it already is. Ask me again yesterday This e-mail is not and cannot, by its nature, be confidential. En route from me to you, it will pass across the public Internet, easily readable by any number of system administrators along the way. Nigel Johnson Please consider the environment when deciding if you really need to print this message
Re: VAX & PDP-11 Stuff To Clean Out
Are you sure you won't ship the Maxtor ESDI drves? I have a microvax 2 here just crying out for them. Unfortunately CA is a five day drive away for me! Nigel ve3id On 06/11/2019 13:16, David Coolbear via cctech wrote: I have the following 5-1/4" Drives that I would like to get rid of. These have all been working at one time or another, but I have no idea what condition they are in now. Maxtor EXT 4330 Seagate ST4766N Hitachi DK516-12 Maxtor XT-8760E Maxtor XT-4170E I also have the following QBUS cards to part with. Module Number Part# Description Form QBUS Extender D M7504 DEQNA Ethernet D M8043 DLV11 4xSLU D M8043 DLV11 4xSLU D M7941 DRV11 16 Bit Parallel D M8186 KDF11 11/23 CPU D M8186 KDF11 11/23 CPU D M8189 KDJ11 11/73 CPU D M8192-YB KDJ11 11/73 CPU D M8192-YB KDJ11 11/73 CPU D M8047 MXV11 ROM/RAM D M7555 RQDX3 D M8029 RXV21 RX02 Controller D M7646 TQK50 Tape Controller D M8044-DB Memory 16K 32K? D M8044-DE Memory 16K 32K? D DATARAM 63010 Q Camington CMX1651 Memory Q M7606-AF KA630 CPU Q M7620-AA KA650 CPU Q M7620-BA KA650 CPU Q M7164 KDA50 SDI Controller Q M7165 KDA50 SDI Controller Q M5976-AA KZQSA SCSI Controller Q M5976-AA KZQSA SCSI Controller Q M8067 Memory Q M7168 VCB02 Bit Map Q M7169 VCB02 Controller Q M7608-BP MS630BB 4-Meg Memory Q M7608-BP MS630BB 4-Meg Memory Q M7957 4xSLU Q SCD-RQD11/EC ESDI Controller Q All of these are FTAGH, but I wouldn't turn down a trade either. I'd be interested in drive sleds for my BA123 or a spare power supply, also for the BA123 or I'm always interested in M68K/M6809 stuff. I would prefer local pickup near Livermore, CA. I don't believe that the drives are shippable. Please contact me directly at -- Nigel Johnson MSc., MIEEE VE3ID/G4AJQ/VA3MCU Amateur Radio, the origin of the open-source concept! You can reach me by voice on Skype: TILBURY2591 If time travel ever will be possible, it already is. Ask me again yesterday This e-mail is not and cannot, by its nature, be confidential. En route from me to you, it will pass across the public Internet, easily readable by any number of system administrators along the way. Nigel Johnson Please consider the environment when deciding if you really need to print this message
Re: VAX & PDP-11 Stuff To Clean Out
> On Nov 6, 2019, at 4:20 PM, Nigel Johnson via cctech > wrote: > > Are you sure you won't ship the Maxtor ESDI drves? I have a microvax 2 here > just crying out for them. Unfortunately CA is a five day drive away for me! > > Nigel ve3id Drives are definitely shippable, and small drives like 5.25 inch ones shouldn't be a big deal. Traditional shipping involves a sturdy box with a couple of inches of foam inside holding the drive. Avoid loose fill like "foam peanuts". I once received an RP06 pack that came in a large box full of foam peanuts, but the pack had settled in the bottom corner and was dented on that side. paul
Re: VAX & PDP-11 Stuff To Clean Out
On 11/6/19 12:16 PM, David Coolbear via cctech wrote: M5976-AA KZQSA SCSI Controller Q Hmm, I could sure use one of those... I bought a bunch of QBus boards from my recycler quite some time ago, but the systems that they'd been pulled from were run with SMD drives. Finding a working SMD drive is something of a challenge, but SCSI at least opens up possibilities of emulated storage (or real spinning rust, I may still have a suitable drive or two, albeit currently on the other side of the Atlantic) The two VCB02 boards have me intrigued, too :-) cheers Jules
Re: VAX & PDP-11 Stuff To Clean Out
On Thu, Nov 7, 2019 at 6:36 PM Jules Richardson via cctech wrote: > > On 11/6/19 12:16 PM, David Coolbear via cctech wrote: > > M5976-AA KZQSA SCSI Controller Q > > Hmm, I could sure use one of those... > > I bought a bunch of QBus boards from my recycler quite some time ago, but > the systems that they'd been pulled from were run with SMD drives. Finding > a working SMD drive is something of a challenge, but SCSI at least opens up > possibilities of emulated storage (or real spinning rust, I may still have > a suitable drive or two, albeit currently on the other side of the Atlantic) An M5976 KZQSA is not an MSCP compatible controller. If I remember correctly an M7626 KA660 VAX 4000-200 or better CPU is necessary to boot from it, and the only OS that supports it is VMS, and only SCSI CD-ROM drives are officially supported. I have never tried to boot VMS from a SCSI hard drive attached to an M5976 KZQSA, or tried to access a SCSI hard drive attached to an M5976 KZQSA after booting VMS from a different drive. I have only used them for installing VMS from a CD-ROM on a VAX 4000, or for installing layered products from a CD-ROM on any Q-Bus VAX after VMS is already installed. For that limited purpose they work well.
Re: VAX & PDP-11 Stuff To Clean Out
On Thu, Nov 7, 2019, 19:36 Jules Richardson via cctech < cct...@classiccmp.org> wrote: > On 11/6/19 12:16 PM, David Coolbear via cctech wrote: > > M5976-AA KZQSA SCSI Controller Q > > Hmm, I could sure use one of those... > Be forewarned that a KZQSA isn't a "real" SCSI controller. It's doesn't use MSCP, and doesn't emulate any better-supported controller. It only is intended to support a few specific tape drives and CD-ROM drives. It's supported in some versions of VMS; I'm not sure about Ultrix. I don't think it can be used as a boot device, though I'm less certain about that.
Re: VAX & PDP-11 Stuff To Clean Out
I'm starting to get heavily invested in rebuilding my microvax 2, it would be a shame if the cpu failed, so I'd like to put my name down for the KA630 pcu card if nobody local wants it. cheers, Nigel On 08/11/2019 15:12, David Coolbear via cctech wrote: Most of the items are spoken for but I still have the following: Caminton CMX1651 Memory M7606-AF KA630 CPU M7620-AA KA650 CPU M8067 Memory M7168 VCB02 Bit Map M7169 VCB02 Controller M7608-BP MS630BB 4-Meg Memory M7608-BP MS630BB 4-Meg Memory SCD-RQD11/EC ESDI Controller ...so, mainly the VAX stuff. Priority goes to local pickup. I've had all of these boards working at one time or another but I can't speak to their current status. David Coolbear da...@thecoolbears.org -- Nigel Johnson MSc., MIEEE VE3ID/G4AJQ/VA3MCU Amateur Radio, the origin of the open-source concept! You can reach me by voice on Skype: TILBURY2591 If time travel ever will be possible, it already is. Ask me again yesterday This e-mail is not and cannot, by its nature, be confidential. En route from me to you, it will pass across the public Internet, easily readable by any number of system administrators along the way. Nigel Johnson Please consider the environment when deciding if you really need to print this message
Re: VAX & PDP-11 Stuff To Clean Out
I have a machine that needs these specific models of ESDI disk Nigel, I was hoping for them. Your Uvax can use plenty of different types. Trying to facilitate transfer (I am speaking of only the Maxtor disks) Sent from my iPhone > On Nov 6, 2019, at 13:45, Nigel Johnson via cctalk > wrote: > > Are you sure you won't ship the Maxtor ESDI drves? I have a microvax 2 here > just crying out for them. Unfortunately CA is a five day drive away for me! > > Nigel ve3id > > >> On 06/11/2019 13:16, David Coolbear via cctech wrote: >> I have the following 5-1/4" Drives that I would like to get rid of. These >> have all been working at one time or another, but I have no idea what >> condition they are in now. >> >> >> Maxtor EXT 4330 >> Seagate ST4766N >> Hitachi DK516-12 >> Maxtor XT-8760E >> Maxtor XT-4170E >> >> I also have the following QBUS cards to part with. >> >> Module Number Part# Description Form >> QBUS Extender D >> M7504 DEQNA Ethernet D >> M8043 DLV11 4xSLU D >> M8043 DLV11 4xSLU D >> M7941 DRV11 16 Bit Parallel D >> M8186 KDF11 11/23 CPU D >> M8186 KDF11 11/23 CPU D >> M8189 KDJ11 11/73 CPU D >> M8192-YB KDJ11 11/73 CPU D >> M8192-YB KDJ11 11/73 CPU D >> M8047 MXV11 ROM/RAM D >> M7555 RQDX3 D >> M8029 RXV21 RX02 Controller D >> M7646 TQK50 Tape Controller D >> M8044-DB Memory 16K 32K? D >> M8044-DE Memory 16K 32K? D >> DATARAM 63010 Q >> Camington CMX1651 Memory Q >> M7606-AF KA630 CPU Q >> M7620-AA KA650 CPU Q >> M7620-BA KA650 CPU Q >> M7164 KDA50 SDI Controller Q >> M7165 KDA50 SDI Controller Q >> M5976-AA KZQSA SCSI Controller Q >> M5976-AA KZQSA SCSI Controller Q >> M8067 Memory Q >> M7168 VCB02 Bit Map Q >> M7169 VCB02 Controller Q >> M7608-BP MS630BB 4-Meg Memory Q >> M7608-BP MS630BB 4-Meg Memory Q >> M7957 4xSLU Q >> SCD-RQD11/EC ESDI Controller Q >> >> >> All of these are FTAGH, but I wouldn't turn down a trade either. I'd be >> interested in drive sleds for my BA123 or a spare power supply, also for >> the BA123 or I'm always interested in M68K/M6809 stuff. I would prefer >> local pickup near Livermore, CA. I don't believe that the drives are >> shippable. >> >> Please contact me directly at > > > -- > Nigel Johnson > MSc., MIEEE > VE3ID/G4AJQ/VA3MCU > > Amateur Radio, the origin of the open-source concept! > > > You can reach me by voice on Skype: TILBURY2591 > > If time travel ever will be possible, it already is. Ask me again yesterday > > This e-mail is not and cannot, by its nature, be confidential. En route from > me to you, it will pass across the public Internet, easily readable by any > number of system administrators along the way. > Nigel Johnson > >Please consider the environment when deciding if you really need to print > this message > > >