Re: What does this error mean ?
On Wed, Dec 24, 2008 at 12:17:01PM +0100, Joerg Schilling wrote: Hello again, > You still did not send the ADIP info but the media has been written > to, but it may be that only a writer will read it as it was not closed > (fixated). > > The latter seems to be a problem of your drive Yes that should be it (or just the media...). > Cdrecord did what is documented to write DVD-Rs and this did not change since > cdrecord introduced DVD-R support in March 1998 nearly 11 years ago. Driver flags : NO-CD DVD MMC-3 SWABAUDIO BURNFREE Supported modes: PACKET SAO LAYER_JUMP book type: DVD-R, Version 2.0x -> 2.1 (2.5) disc size: 120mm (0) maximum rate:Not specified (15) number of layers:1 track path: Parallel Track Path (0) layer type: Rewritable Area (2) linear density: 0.267 µm/bit (0) track density: 0.74 µm/track (0) phys start: 196608 (0x3) phys end:0 end layer 0: 0 bca: 0 phys size:...-196607 copyr prot type: 0 region mgt info: 0 last rma sector: 0 application code:64 physical code: 193 last rec address:16621272 part v./ext code:5/2 ind wr. power: 133 wavelength code: 13 write str. code: 0E 88 9A 80 Manufacturer: 'MCC 03RG20 ' rzone size: 40 rzone number: 1 border number: 1 ljrs: 0 track mode: 4 copy: 0 damage: 0 reserved track: 0 blank: 0 incremental: 1 fp: 0 data mode: 1 lra valid: 0 nwa valid: 1 rzone start:0 next wr addr: 2211648 free blocks:86240 blocking factor:16 rzone size: 2297888 last recorded addr: 0 read compat lba:0 Capacity Blklen/Sparesz. Format-type Type 2297888 2048 0x00 Unformated or Blank Media 2297888 2048 0x00 Reserved (0) 2297888 16 0x10 Reserved (0) 2297888 16 0x15 Reserved (0) Sorry, I missunderstood your or better and only sent the second one :-) -- Grégoire FAVRE http://gregoire.favre.googlepages.com http://www.gnupg.org http://picasaweb.google.com/Gregoire.Favre -- To UNSUBSCRIBE, email to cdwrite-requ...@other.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@other.debian.org
Re: What does this error mean ?
Gregoire Favre wrote: > They are Verbatim DVD-R 4.7GB 16X AZO > > > You did not mention the media state > > Mounted media class: DVD > Mounted media type: DVD-R sequential recording > Disk Is not erasable > data type:standard > disk status: incomplete/appendable > session status: incomplete/appendable > BG format status: none > first track: 1 > number of sessions: 1 > first track in last sess: 1 > last track in last sess: 1 > Disk Is unrestricted > Disk type: DVD, HD-DVD or BD > > Track Sess Type Start Addr End Addr Size > == > 1 1 Blank 0 22984952298496 > > Next writable address: 2211648 > Remaining writable size:2298496 > > But, 99.99% of the time, I got complete success at writing. > > > >From the size info I can guess that this may be a DVD but a > > DVD has no PMA so I would guess that you have a problem > > with your drive. > > Well, here I am lost You still did not send the ADIP info but the media has been written to, but it may be that only a writer will read it as it was not closed (fixated). The latter seems to be a problem of your drive Cdrecord did what is documented to write DVD-Rs and this did not change since cdrecord introduced DVD-R support in March 1998 nearly 11 years ago. Jörg -- EMail:jo...@schily.isdn.cs.tu-berlin.de (home) Jörg Schilling D-13353 Berlin j...@cs.tu-berlin.de(uni) joerg.schill...@fokus.fraunhofer.de (work) Blog: http://schily.blogspot.com/ URL: http://cdrecord.berlios.de/private/ ftp://ftp.berlios.de/pub/schily -- To UNSUBSCRIBE, email to cdwrite-requ...@other.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@other.debian.org
Re: What does this error mean ?
On Wed, Dec 24, 2008 at 11:35:17AM +0100, Joerg Schilling wrote: > How do you believe you could get help with this? I received the answer I was waiting for :-) > You did not mention the software you used It's your great one, version 2.01.01_alpha53 > you did not mention the drive you used Device type: Removable CD-ROM Version: 5 Response Format: 2 Capabilities : Vendor_info: 'TSSTcorp' Identifikation : 'CDDVDW SH-S223F ' Revision : 'SB02' Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM. Using generic SCSI-3/mmc-2 DVD-R/DVD-RW/DVD-RAM driver (mmc_dvd). Driver flags : NO-CD DVD MMC-3 SWABAUDIO BURNFREE Supported modes: PACKET SAO LAYER_JUMP > You did not mention the media type > > You did not mention the media manufacturer They are Verbatim DVD-R 4.7GB 16X AZO > You did not mention the media state Mounted media class: DVD Mounted media type: DVD-R sequential recording Disk Is not erasable data type:standard disk status: incomplete/appendable session status: incomplete/appendable BG format status: none first track: 1 number of sessions: 1 first track in last sess: 1 last track in last sess: 1 Disk Is unrestricted Disk type: DVD, HD-DVD or BD Track Sess Type Start Addr End Addr Size == 1 1 Blank 0 22984952298496 Next writable address: 2211648 Remaining writable size:2298496 But, 99.99% of the time, I got complete success at writing. > >From the size info I can guess that this may be a DVD but a > DVD has no PMA so I would guess that you have a problem > with your drive. Well, here I am lost > > The cdrecord web site mentions what you need to send Here we have a point, in order to have an even better cdrecord, that could be printed when an error is encountered, just for stupid people like me which don't think enough before reporting an incident :-) > cdrecord -atip or better: cdrecord -v -minfo > > and the cdrecord -v output from writing the medium. That one is a little hard to do after the writing... I posted the end of it. Thank you really much for cdrecord (and all which depends on it), maybe my burn script is somehow false and a more skilled could look at it, specialy for the more of 4Gb part ? -- Grégoire FAVRE http://gregoire.favre.googlepages.com http://www.gnupg.org http://picasaweb.google.com/Gregoire.Favre #!/bin/bash if [ -z "$2" ]; then echo "usage : $0 DVD_title DVD_dir [write speed]" echo "That will write a DVD with video structure if there a VIDEO_TS." echo "And without video structure if without VIDEO_TS dir" exit fi UDF=`find $2 -size +2G|wc -w` unlock() { cdrdao unlock --device 5,0,0 --driver generic-mmc && sleep 1 } sync ulimit -l unlimited if [ $UDF -eq 0 ]; then COM="-f -J -r -graft-points " if [ -z "$3" ]; then COMCD="-v dev=5,0,0 -dao fs=1000m " else COMCD="-speed=$3 -v dev=5,0,0 -dao fs=1000m " fi VIDEO=`ls $2|grep -i VIDEO_TS 2> /dev/null |wc -w` if [ $VIDEO -eq 0 ]; then OPTS=$COM SIZE=`mkisofs -f -J -r -graft-points -quiet -print-size -V $1 $2` else OPTS="$COM -dvd-video" SIZE=`mkisofs -f -J -r -graft-points -quiet -print-size -dvd-video -V $1 $2` fi mkisofs $OPTS -V $1 $2|cdrecord $COMCD tsize="$SIZE"s - else COM="-iso-level 3 -f -J -r -graft-points " if [ -z "$3" ]; then COMCD="-v dev=5,0,0 -dao fs=1000m " else COMCD="-speed=$3 -v dev=5,0,0 -dao fs=1000m " fi VIDEO=`ls $2|grep -i VIDEO_TS 2> /dev/null |wc -w` if [ $VIDEO -eq 0 ]; then OPTS=$COM SIZE=`mkisofs -iso-level 3 -f -J -r -graft-points -quiet -print-size -V $1 $2` else OPTS="$COM -dvd-video" SIZE=`mkisofs -iso-level 3 -f -J -r -graft-points -quiet -print-size -dvd-video -V $1 $2` fi mkisofs $OPTS -V $1 $2|cdrecord $COMCD tsize="$SIZE"s - fi unlock eject /dev/sr1 sleep 1 eject -t /dev/sr1 cdDir=0 while [ "$cdDir" == "0" ]; do sleep 1 mount /mnt/cdrom2 && ls -alh /mnt/cdrom2 && DF && umount /mnt/cdrom2 && cdDir=1 done sleep 1 #eject /dev/sr1 OPTIONS="delete reburn exit" select opt in $OPTIONS; do if [ "$opt" = "delete" ]; then RM $2 exit elif [ "$opt" = "reburn" ]; then echo $0 $* exit elif [ "$opt" = "exit" ]; then exit else echo bad option fi done
Re: What does this error mean ?
Gregoire Favre wrote: > Hello, > > a burn ended like this : > > Track 01: 3219 of 4227 MB written (fifo 100%) [buf 100%] 4.3x. 99.79% done, > estimate finish Tue Dec 23 20:52:18 2008 > Track 01: 3227 of 4227 MB written (fifo 100%) [buf 100%] 4.1x.Total > translation table size: 0 > Total rockridge attributes bytes: 3728 > Total directory bytes: 2048 > Path table size(bytes): 26 > Max brk space used 0 > 2164544 extents written (4227 MB) > Track 01: 4227 of 4227 MB written (fifo 100%) [buf 100%] 4.3x. > Track 01: Total bytes read/written: 4432986112/4432986112 (2164544 sectors). > Writing time: 868.604s > Average write speed 3.7x. > Min drive buffer fill was 99% > Fixating... > cdrecord: Input/output error. flush cache: scsi sendcmd: no error > CDB: 35 00 00 00 00 00 00 00 00 00 > status: 0x2 (CHECK CONDITION) > Sense Bytes: 71 00 03 00 00 00 00 0A 00 00 00 00 73 04 00 00 > Sense Key: 0x3 Medium Error, deferred error, Segment 0 > Sense Code: 0x73 Qual 0x04 (program memory area update failure) Fru 0x0 > Sense flags: Blk 0 (not valid) > cmd finished after 57.902s timeout 1000s > Trouble flushing the cache > cdrecord: Cannot fixate disk. > Fixating time: 57.902s > cdrecord: fifo had 45095 puts and 45095 gets. > cdrecord: fifo was 0 times empty and 30117 times full, min fill was 99%. How do you believe you could get help with this? You did not mention the software you used you did not mention the drive you used You did not mention the media type You did not mention the media manufacturer You did not mention the media state >From the size info I can guess that this may be a DVD but a DVD has no PMA so I would guess that you have a problem with your drive. The cdrecord web site mentions what you need to send cdrecord -atip or better: cdrecord -v -minfo and the cdrecord -v output from writing the medium. Jörg -- EMail:jo...@schily.isdn.cs.tu-berlin.de (home) Jörg Schilling D-13353 Berlin j...@cs.tu-berlin.de(uni) joerg.schill...@fokus.fraunhofer.de (work) Blog: http://schily.blogspot.com/ URL: http://cdrecord.berlios.de/private/ ftp://ftp.berlios.de/pub/schily -- To UNSUBSCRIBE, email to cdwrite-requ...@other.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@other.debian.org
Re: What does this error mean ?
Hello, it's with original cdrecord 2.01.01_alpha53. It's worked very well with the same media for lots of burning, and soemthing strange : the media is said to be empty and I can burn again on it... then : dvd+rw-mediainfo /dev/sr1 INQUIRY:[TSSTcorp][CDDVDW SH-S223F ][SB02] GET [CURRENT] CONFIGURATION: Mounted Media: 11h, DVD-R Sequential Media ID: MCC 03RG20 Current Write Speed: 18.0x1385=24930KB/s Write Speed #0:18.0x1385=24930KB/s Write Speed #1:16.0x1385=22160KB/s Write Speed #2:12.0x1385=16620KB/s Write Speed #3:8.0x1385=11080KB/s Write Speed #4:6.0x1385=8310KB/s Write Speed #5:4.0x1385=5540KB/s GET [CURRENT] PERFORMANCE: Write Performance: 18.0x1385=24930KB/s...@[0 -> 2298496] Speed Descriptor#0:08/2297887 r...@16.0x1385=22160kb/s w...@18.0x1385=24930kb/s Speed Descriptor#1:08/2297887 r...@16.0x1385=22160kb/s w...@16.0x1385=22160kb/s Speed Descriptor#2:08/2297887 r...@16.0x1385=22160kb/s w...@12.0x1385=16620kb/s Speed Descriptor#3:00/2297887 r...@16.0x1385=22160kb/s w...@8.0x1385=11080kb/s Speed Descriptor#4:00/2297887 r...@16.0x1385=22160kb/s w...@6.0x1385=8310kb/s Speed Descriptor#5:00/2297887 r...@16.0x1385=22160kb/s w...@4.0x1385=5540kb/s READ DVD STRUCTURE[#0h]: Media Book Type: 00h, DVD-ROM book [revision 0] Legacy lead-out at:0*2KB=0 READ DISC INFORMATION: Disc status: appendable Number of Sessions:1 State of Last Session: incomplete "Next" Track: 1 Number of Tracks: 1 READ TRACK INFORMATION[#1]: Track State: blank Track Start Address: 0*2KB Next Writable Address: 2211616*2KB Free Blocks: 86880*2KB Track Size:2298496*2KB READ CAPACITY: 0*2048=0 And it's from Verbatim AZ serie which are normaly just fine here... Thank you for your answer, I'll forget about this media ;-) Happy XMas, -- Grégoire FAVRE http://gregoire.favre.googlepages.com http://www.gnupg.org http://picasaweb.google.com/Gregoire.Favre -- To UNSUBSCRIBE, email to cdwrite-requ...@other.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@other.debian.org
Re: What does this error mean ?
Hi, > Track 01: 4227 of 4227 MB written (fifo 100%) [buf 100%] 4.3x. > ... > CDB: 35 00 00 00 00 00 00 00 00 00 > ... > Sense Key: 0x3 Medium Error, deferred error, Segment 0 > Sense Code: 0x73 Qual 0x04 (program memory area update failure) Fru 0x0 Affected is some kind of DVD, i assume. Failed command is SYNCHRONIZE CACHE, which is supposed to be issued at the very end of a burn. It tells the drive that the logical track is finished. The error would rather belong to CD media. MMC-5, 4.2.3.10.1 "The Program Memory Area is present only for CD-R and CD-RW media for the purpose of accounting for the usage of user data areas on the medium. [...] Update the PMA means to update the PMA on the disc or to update the PMA Cache that shall be written to the PMA on the disc prior to the removing the disc from the Drive." It is likely that the firmware programmers of your drive re-use that CD error code for some DVD mishap. So the problem is obviously between drive and media and not between burn program and drive. That means the classic remedy applies: Try what happens if you use different media or a different drive. Have a nice day :) Thomas -- To UNSUBSCRIBE, email to cdwrite-requ...@other.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@other.debian.org
Re: What does this error mean ?
Gregoire Favre wrote: Hello, How about telling us which software you used and which OS? And if you use something called "cdrecord" is it the version from the author, or the fake some Linux distributions include which is confusingly called by the same name, so scripts would use their software instead of the original. a burn ended like this : Track 01: 3219 of 4227 MB written (fifo 100%) [buf 100%] 4.3x. 99.79% done, estimate finish Tue Dec 23 20:52:18 2008 Track 01: 3227 of 4227 MB written (fifo 100%) [buf 100%] 4.1x.Total translation table size: 0 Total rockridge attributes bytes: 3728 Total directory bytes: 2048 Path table size(bytes): 26 Max brk space used 0 2164544 extents written (4227 MB) Track 01: 4227 of 4227 MB written (fifo 100%) [buf 100%] 4.3x. Track 01: Total bytes read/written: 4432986112/4432986112 (2164544 sectors). Writing time: 868.604s Average write speed 3.7x. Min drive buffer fill was 99% Fixating... cdrecord: Input/output error. flush cache: scsi sendcmd: no error CDB: 35 00 00 00 00 00 00 00 00 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 71 00 03 00 00 00 00 0A 00 00 00 00 73 04 00 00 Sense Key: 0x3 Medium Error, deferred error, Segment 0 Sense Code: 0x73 Qual 0x04 (program memory area update failure) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 57.902s timeout 1000s Trouble flushing the cache cdrecord: Cannot fixate disk. Fixating time: 57.902s cdrecord: fifo had 45095 puts and 45095 gets. cdrecord: fifo was 0 times empty and 30117 times full, min fill was 99%. Thanks. -- E. Robert Bogusta It seemed like a good idea at the time -- To UNSUBSCRIBE, email to cdwrite-requ...@other.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@other.debian.org