[CentOS-es] Error en system-config-samba no muest ra la información después de cerrarse
Buenas amigos, en CentOS 5.2 (y toda la serie de la 5.x) en el paquete system-config-samba al dar de alta un usuario o una carpeta compartida muestra en pantalla todo correctamente, pero al cerrarlo y volverlo a abrir estos desaparecen y quedan en blanco como si no se hubiera hecho algún cambio, ya lo probé con GNOME y XFCE y el resultado es el mismo en 3 maquinas distintas. Alguna idea? Gracias. -- Jorge García ___ CentOS-es mailing list CentOS-es@centos.org http://lists.centos.org/mailman/listinfo/centos-es
Re: [CentOS-es] Error en system-config-samba no muestra la información después de cerrarse
Hola estimado. Puedes aportar un poco mas de informacion si no me equivoco ese paquete es un entorno grafico para samba?? Te pasa lo mismo si lo agregas por medio de comandos pasa lo mismo??? Es un pdc o solo lo tienes para conpartir archivos?? Los directorios estan con los permisos adecuados?? El directorio esta asociado algun grupo o el dueño siempre es el root?? Por ultomo que dicen los logs?? On Wed, Oct 22, 2008 at 8:36 PM, Jorge García [EMAIL PROTECTED] wrote: Buenas amigos, en CentOS 5.2 (y toda la serie de la 5.x) en el paquete system-config-samba al dar de alta un usuario o una carpeta compartida muestra en pantalla todo correctamente, pero al cerrarlo y volverlo a abrir estos desaparecen y quedan en blanco como si no se hubiera hecho algún cambio, ya lo probé con GNOME y XFCE y el resultado es el mismo en 3 maquinas distintas. Alguna idea? Gracias. -- Jorge García ___ CentOS-es mailing list CentOS-es@centos.org http://lists.centos.org/mailman/listinfo/centos-es ___ CentOS-es mailing list CentOS-es@centos.org http://lists.centos.org/mailman/listinfo/centos-es
RE: [CentOS] What keeps logging to my console?
Michael H. Warfield scribbled on Tuesday, October 21, 2008 7:53 PM: The setterm-command I tried yesterday didn't work. I'll give your setting a go. Make sure you ran it from a VC. It won't work remotely or in an X windows terminal window. I've got to read the posts better... Thx for the heads-up. 8-} /S smime.p7s Description: S/MIME cryptographic signature ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
[CentOS] Re: looking for stunnel configuration file for /etc/xinetd.d/
Rudi Ahlers wrote: Hi all Does anyone have a config file for stunnel, to work with /etc/xinetd.d? I use the following setup to allow normal IMAP access to an Exchange system that only speaks IMAP+TLS/SSL. /etc/xinetd.d/exhange-imaps: # Redirect IMAP on port 143 using stunnel service exchange { type= UNLISTED port= 143 socket_type = stream wait= no user= root protocol= tcp server = /usr/sbin/stunnel server_args = /etc/stunnel/exchange-imaps.conf log_on_success += USERID log_on_failure += USERID } /etc/stunnel/exchange-imaps.conf: client = yes connect = imap.example.com:993 -tgc ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
[CentOS] CentOS-announce Digest, Vol 44, Issue 13
Send CentOS-announce mailing list submissions to [EMAIL PROTECTED] To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to [EMAIL PROTECTED] You can reach the person managing the list at [EMAIL PROTECTED] When replying, please edit your Subject line so it is more specific than Re: Contents of CentOS-announce digest... Today's Topics: 1. CESA-2008:0896 Moderate CentOS 3 i386 ruby - security update (Tru Huynh) 2. CESA-2008:0896 Moderate CentOS 3 x86_64 ruby -security update (Tru Huynh) 3. CESA-2008:0946 Moderate CentOS 3 i386 ed -security update (Tru Huynh) 4. CESA-2008:0946 Moderate CentOS 3 x86_64 ed - security update (Tru Huynh) 5. CESA-2008:0895-02: Moderate CentOS 2 i386 rubysecurity update (John Newbigin) 6. CESA-2008:0946-01: Moderate CentOS 2 i386 ed security update (John Newbigin) -- Message: 1 Date: Tue, 21 Oct 2008 18:06:28 +0200 From: Tru Huynh [EMAIL PROTECTED] Subject: [CentOS-announce] CESA-2008:0896 Moderate CentOS 3 i386 ruby - security update To: [EMAIL PROTECTED] Message-ID: [EMAIL PROTECTED] Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory CESA-2008:0896 ruby security update for CentOS 3 i386: https://rhn.redhat.com/errata/RHSA-2008-0896.html The following updated file has been uploaded and is currently syncing to the mirrors: i386: updates/i386/RPMS/irb-1.6.8-13.el3.i386.rpm updates/i386/RPMS/ruby-1.6.8-13.el3.i386.rpm updates/i386/RPMS/ruby-devel-1.6.8-13.el3.i386.rpm updates/i386/RPMS/ruby-docs-1.6.8-13.el3.i386.rpm updates/i386/RPMS/ruby-libs-1.6.8-13.el3.i386.rpm updates/i386/RPMS/ruby-mode-1.6.8-13.el3.i386.rpm updates/i386/RPMS/ruby-tcltk-1.6.8-13.el3.i386.rpm source: updates/SRPMS/ruby-1.6.8-13.el3.src.rpm You may update your CentOS-3 i386 installations by running the command: yum update ruby Tru -- Tru Huynh (mirrors, CentOS-3 i386/x86_64 Package Maintenance) http://pgp.mit.edu:11371/pks/lookup?op=getsearch=0xBEFA581B -- next part -- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 189 bytes Desc: not available Url : http://lists.centos.org/pipermail/centos-announce/attachments/20081021/a21eaf2d/attachment-0001.bin -- Message: 2 Date: Tue, 21 Oct 2008 18:07:07 +0200 From: Tru Huynh [EMAIL PROTECTED] Subject: [CentOS-announce] CESA-2008:0896 Moderate CentOS 3 x86_64 ruby - security update To: [EMAIL PROTECTED] Message-ID: [EMAIL PROTECTED] Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory CESA-2008:0896 ruby security update for CentOS 3 x86_64: https://rhn.redhat.com/errata/RHSA-2008-0896.html The following updated file has been uploaded and is currently syncing to the mirrors: x86_64: updates/x86_64/RPMS/irb-1.6.8-13.el3.x86_64.rpm updates/x86_64/RPMS/ruby-1.6.8-13.el3.x86_64.rpm updates/x86_64/RPMS/ruby-devel-1.6.8-13.el3.x86_64.rpm updates/x86_64/RPMS/ruby-docs-1.6.8-13.el3.x86_64.rpm updates/x86_64/RPMS/ruby-libs-1.6.8-13.el3.i386.rpm updates/x86_64/RPMS/ruby-libs-1.6.8-13.el3.x86_64.rpm updates/x86_64/RPMS/ruby-mode-1.6.8-13.el3.x86_64.rpm updates/x86_64/RPMS/ruby-tcltk-1.6.8-13.el3.x86_64.rpm source: updates/SRPMS/ruby-1.6.8-13.el3.src.rpm You may update your CentOS-3 x86_64 installations by running the command: yum update ruby Tru -- Tru Huynh (mirrors, CentOS-3 i386/x86_64 Package Maintenance) http://pgp.mit.edu:11371/pks/lookup?op=getsearch=0xBEFA581B -- next part -- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 189 bytes Desc: not available Url : http://lists.centos.org/pipermail/centos-announce/attachments/20081021/8f605558/attachment-0001.bin -- Message: 3 Date: Tue, 21 Oct 2008 18:07:40 +0200 From: Tru Huynh [EMAIL PROTECTED] Subject: [CentOS-announce] CESA-2008:0946 Moderate CentOS 3 i386 ed - security update To: [EMAIL PROTECTED] Message-ID: [EMAIL PROTECTED] Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory CESA-2008:0946 ed security update for CentOS 3 i386: https://rhn.redhat.com/errata/RHSA-2008-0946.html The following updated file has been uploaded and is currently syncing to the mirrors: i386: updates/i386/RPMS/ed-0.2-33.30E.1.i386.rpm source: updates/SRPMS/ed-0.2-33.30E.1.src.rpm You may update your CentOS-3 i386 installations by running the command: yum update ed Tru -- Tru Huynh (mirrors, CentOS-3 i386/x86_64 Package Maintenance) http://pgp.mit.edu:11371/pks/lookup?op=getsearch=0xBEFA581B -- next part -- A non-text attachment was scrubbed... Name: not
[CentOS] Re: KDE Versions in CentOS ?
kevin kempter wrote: HI LIst; What version of KDE is included in the latest version of CentOS ? Also, is there a way to get KDE4 in CentOS ? It's possible, but no one has yet done the work to build/package kde4 for CentOS (would require upgrading some core components, one of which... qt4) If so, Can I have both KDE3.x and KDE4 installed and switch back and forth between the 2 versions if needed ? Not easily anyway, same answers as for fedora apply here: http://fedoraproject.org/wiki/SIGs/KDE/KDE4FAQ -- Rex ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
[CentOS] SCSI error: return code = 0x10070000
I have just bought a 120GB external usb drive but after plugging it in it is not getting mounted. lines from /var/log/messages: Oct 22 18:54:49 station2 kernel: usb 1-2: new high speed USB device using ehci_hcd and address 2 Oct 22 18:54:49 station2 kernel: usb 1-2: configuration #1 chosen from 1 choice Oct 22 18:54:49 station2 kernel: scsi4 : SCSI emulation for USB Mass Storage devices Oct 22 18:54:54 station2 kernel: Vendor: ST312002 Model: 2A Rev: 0 0 Oct 22 18:54:54 station2 kernel: Type: Direct-Access ANSI SCSI revision: 00 Oct 22 18:54:54 station2 kernel: SCSI device sdd: 234441648 512-byte hdwr sectors (120034 MB) Oct 22 18:54:54 station2 kernel: sdd: Write Protect is off Oct 22 18:54:54 station2 kernel: sdd: assuming drive cache: write through Oct 22 18:54:54 station2 kernel: SCSI device sdd: 234441648 512-byte hdwr sectors (120034 MB) Oct 22 18:54:54 station2 kernel: sdd: Write Protect is off Oct 22 18:54:54 station2 kernel: sdd: assuming drive cache: write through Oct 22 18:54:54 station2 kernel: sdd:6sd 4:0:0:0: SCSI error: return code = 0x1007 Oct 22 18:54:54 station2 kernel: end_request: I/O error, dev sdd, sector 0 Oct 22 18:54:54 station2 kernel: Buffer I/O error on device sdd, logical block 0 Oct 22 18:54:54 station2 kernel: sd 4:0:0:0: SCSI error: return code = 0x1007 Oct 22 18:54:54 station2 kernel: end_request: I/O error, dev sdd, sector 0 Oct 22 18:54:54 station2 kernel: Buffer I/O error on device sdd, logical block 0 Oct 22 18:54:54 station2 kernel: sd 4:0:0:0: SCSI error: return code = 0x1007 Oct 22 18:54:54 station2 kernel: end_request: I/O error, dev sdd, sector 0 Oct 22 18:54:54 station2 kernel: Buffer I/O error on device sdd, logical block 0 Oct 22 18:54:54 station2 kernel: sd 4:0:0:0: SCSI error: return code = 0x1007 Oct 22 18:54:54 station2 kernel: end_request: I/O error, dev sdd, sector 0 Oct 22 18:54:54 station2 kernel: Buffer I/O error on device sdd, logical block 0 Oct 22 18:54:54 station2 kernel: sd 4:0:0:0: SCSI error: return code = 0x1007 Oct 22 18:54:54 station2 kernel: end_request: I/O error, dev sdd, sector 0 Oct 22 18:54:54 station2 kernel: Buffer I/O error on device sdd, logical block 0 Oct 22 18:54:54 station2 kernel: sd 4:0:0:0: SCSI error: return code = 0x1007 Oct 22 18:54:54 station2 kernel: end_request: I/O error, dev sdd, sector 0 Oct 22 18:54:54 station2 kernel: Buffer I/O error on device sdd, logical block 0 Oct 22 18:54:54 station2 kernel: sd 4:0:0:0: SCSI error: return code = 0x1007 Oct 22 18:54:54 station2 kernel: end_request: I/O error, dev sdd, sector 0 Oct 22 18:54:54 station2 kernel: Buffer I/O error on device sdd, logical block 0 Oct 22 18:54:54 station2 kernel: Dev sdd: unable to read RDB block 0 Oct 22 18:54:54 station2 kernel: sd 4:0:0:0: SCSI error: return code = 0x1007 Oct 22 18:54:54 station2 kernel: end_request: I/O error, dev sdd, sector 0 Oct 22 18:54:54 station2 kernel: Buffer I/O error on device sdd, logical block 0 Oct 22 18:54:54 station2 kernel: sd 4:0:0:0: SCSI error: return code = 0x1007 Oct 22 18:54:54 station2 kernel: end_request: I/O error, dev sdd, sector 0 Oct 22 18:54:54 station2 kernel: Buffer I/O error on device sdd, logical block 0 Oct 22 18:54:54 station2 kernel: unable to read partition table Oct 22 18:54:54 station2 kernel: sd 4:0:0:0: Attached scsi disk sdd Oct 22 18:54:54 station2 kernel: sd 4:0:0:0: Attached scsi generic sg3 type 0 Oct 22 18:54:54 station2 kernel: sd 4:0:0:0: SCSI error: return code = 0x1007 Oct 22 18:54:54 station2 kernel: end_request: I/O error upon searching in the forum i came accross this tread http://www.centos.org/modules/newbb/viewtopic.php?topic_id=9887forum=29post_id=31541#forumpost31541 but it has gone unanswered for two years. Google search gives result all of which involves moving to a newer kernel.For the matter the drive gets mounted under fedora 9 - but i want to use it with CentOS. here is my lspci -v 00:00.0 RAM memory: nVidia Corporation MCP67 Memory Controller (rev a2) Subsystem: ASUSTeK Computer Inc. Unknown device 82b3 Flags: bus master, 66MHz, fast devsel, latency 0 Capabilities: [44] HyperTransport: Slave or Primary Interface Capabilities: [dc] HyperTransport: MSI Mapping 00:01.0 ISA bridge: nVidia Corporation MCP67 ISA Bridge (rev a2) Subsystem: ASUSTeK Computer Inc. Unknown device 82b3 Flags: bus master, 66MHz, fast devsel, latency 0 I/O ports at 0900 [size=256] 00:01.1 SMBus: nVidia Corporation MCP67 SMBus (rev a2) Subsystem: ASUSTeK Computer Inc. Unknown device 82b3 Flags: 66MHz, fast devsel, IRQ 10 I/O ports at dc00 [size=64] I/O ports at 0600 [size=64] I/O ports at 0700 [size=64] Capabilities: [44] Power Management version 2 00:02.0 USB Controller: nVidia Corporation MCP67 OHCI USB 1.1 Controller (rev a2) (prog-if 10 [OHCI]) Subsystem: ASUSTeK
RE: [CentOS] SCSI error: return code = 0x10070000
partha chowdhury [EMAIL PROTECTED] Writes: Subsystem: ASUSTeK Computer Inc. -- JohnStanley Writes: Have you taken a look at asus.com for kernel modules for the USB integration on the Asus Mother Board. They do offer drivers for various on board controlers and NIC Cards. If perhapse they do have then you will have to compile and install them yourself. They have gotten really decent at *nix drivers. ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
RE: [CentOS] SCSI error: return code = 0x10070000
I have just bought a 120GB external usb drive but after plugging it in it is not getting mounted. JohnStanley Writes: Also look in your BIOS for your USB Settings. Make sure it is Set for Legacy Compatablity so it can run the older 1.0USB and also 2.0USB. ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] SCSI error: return code = 0x10070000
John wrote: partha chowdhury [EMAIL PROTECTED] Writes: Subsystem: ASUSTeK Computer Inc. -- JohnStanley Writes: Have you taken a look at asus.com for kernel modules for the USB integration on the Asus Mother Board. They do offer drivers for various on board controlers and NIC Cards. If perhapse they do have then you will have to compile and install them yourself. They have gotten really decent at *nix drivers. ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos they only have audio driver for linux for the motherboard. ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] SCSI error: return code = 0x10070000
John wrote: I have just bought a 120GB external usb drive but after plugging it in it is not getting mounted. JohnStanley Writes: Also look in your BIOS for your USB Settings. Make sure it is Set for Legacy Compatablity so it can run the older 1.0USB and also 2.0USB. ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos the manual for the usb drive says it is usb 2.0 and bios is set to autodetect usb type. ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] Redhat enterprise rpm
ann kok wrote: Hi all We are difficult to get rpm in our system running redhat enterpirse Can you use the centos rpm to install in redhat eneterprise? ARe they compatible? They are but good luck getting support from RH if there is a problem. nate ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
RE: [CentOS] SCSI error: return code = 0x10070000
Also look in your BIOS for your USB Settings. Make sure it is Set for Legacy Compatablity so it can run the older 1.0USB and also 2.0USB. the manual for the usb drive says it is usb 2.0 and bios is set to autodetect usb type. JohnStanley Writes: Well, I am out of sejustions then. Have you used any other USB drives in that machine? Beside Seagate? ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] Centos/Fedora core won't talk to an Epson Workforce 600 printer
On Wed, Oct 22, 2008 at 9:38 AM, Charles Campbell [EMAIL PROTECTED] wrote: Charles Campbell wrote: Has anyone had any luck getting CUPS to talk to an Epson Workforce 600 printer? I got pipslite and eklite.ppd extracted (and modified it to use Letter instead of A4) but I can't seem to get CUPS to talk succesfully with the printer. The printer configuration under Gnome widget does show that CUPS detected something (pipslite:...) but when I try to use it I get a wrapper error. The wrapper itself is in binary so there's not much I can make of it. This was done with the Workforce600 in wireless mode. I've had no luck with various combinations so far with direct ethernet, wireless ethernet, http:, ipp:, lpd, socket: attempts. Well... according to the OpenPrinting database, it's not looking good: http://www.openprinting.org/show_printer.cgi?recnum=Epson-Workforce_600 Akemi ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] Redhat enterprise rpm
ann kok wrote: Hi all We are difficult to get rpm in our system running redhat enterpirse Can you use the centos rpm to install in redhat eneterprise? What software are you looking to install ? Make sure that your redhat support people dont have any problems with it ( in most cases they wont - just talk to them once ). A lot of open source projects dont publish packages specifically marked for RedhatEL since they dont have access to it. That does not mean it wont work there! - KB ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] SCSI error: return code = 0x10070000
John wrote: Also look in your BIOS for your USB Settings. Make sure it is Set for Legacy Compatablity so it can run the older 1.0USB and also 2.0USB. the manual for the usb drive says it is usb 2.0 and bios is set to autodetect usb type. JohnStanley Writes: Well, I am out of sejustions then. Have you used any other USB drives in that machine? Beside Seagate? ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos i have another 80G external samsung drive from 2 years and it works without problem . ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] OT: Setting a CentOS to gateway a private IP address
I have discovered quagga and installed it on the dual-homed CentOS-5.2 box that I am attempting to configure as a router. Given my previous requirements and configuration: dual-homed host running CentOS-5.2 with eth0 = 2xx.yyy.zzz.23 eth1 = 192.168.219.1 and given that our Cisco 2605 uses ripv2 I infer that my /etc/quagga/ripd.conf file needs to look something like this: hostname myhost.domain.tld password somepassword router rip network eth0 --- is this correct? network 192.168.219.0/24 Can anyone provide me with some further guidance on this together with any recommendations respecting zebra.conf? Regards, -- *** E-Mail is NOT a SECURE channel *** James B. Byrnemailto:[EMAIL PROTECTED] Harte Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3 ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
[CentOS] i would like to add asterix to my centos
I want to add a server of VoIP under my server, but I don't have de doawnload and i don't have the tutotrial. please help me ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
[CentOS] Re: i would like to add asterix to my centos
on 10-22-2008 4:32 PM david fritz spake the following: I want to add a server of VoIP under my server, but I don't have de doawnload and i don't have the tutotrial. please help me I guess you don't have de Google either? http://forum.voxilla.com/asterisk-support-forum/install-asterisk-freepbx-centos-19290.html http://www.voip-info.org/wiki/index.php?page=Asterisk+Linux+CentOS http://voip-buzz.com/2007/08/12/trixbox-24-released-with-asterisk-14-on-centos-5/ -- MailScanner is like deodorant... You hope everybody uses it, and you notice quickly if they don't signature.asc Description: OpenPGP digital signature ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] i would like to add asterix to my centos
david fritz wrote: I want to add a server of VoIP under my server, but I don't have de doawnload and i don't have the tutotrial. please help me asterisk package available from rpmforge. But version 1.2 only. If you want 1.4, you will have to make your own package. ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] i would like to add asterix to my centos
Christopher Chan wrote: david fritz wrote: I want to add a server of VoIP under my server, but I don't have de doawnload and i don't have the tutotrial. please help me asterisk package available from rpmforge. But version 1.2 only. If you want 1.4, you will have to make your own package. or look in atrpms.net -- Karanbir Singh : http://www.karan.org/ : [EMAIL PROTECTED] ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
RE: [CentOS] SCSI error: return code = 0x10070000
behalf of; partha chowdhury [EMAIL PROTECTED] i have another 80G external samsung drive from 2 years and it works without problem . JohnStanley Writes: You could very well be just having an issue wich involves the drive firware not being compatable with the operatting system since the other one does work. As a side note I have a USB Drive and a Thumb drive that will work in windows but not linux. What I did was found one brand and model that worked and bought extra ones for the linux systems. ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos