Re: [CentOS-docs] Tips and Tricks: Install from GRUB
Phil Schaffner wrote: Manuel Wolfshant wrote on 05/26/2010 10:37 AM: ... # kernel /vmlinuz ro root=LABEL=/ vnc vncconnect=192.168.15.2 ip=dhcp upgradeany lang=en_US keymap=us method=http://192.168.15.40/mrepo/centos5-x86_64/disc1/ ksdevice=link Will be glad to add your example, but I don't quite understand root=LABEL=/ - looks like that would point to the hard disks root filesystem rather than the installer. My example is adequate (and used) for remote upgrades (hence the upgradeany from the kernel line) rather than fresh installs. ___ CentOS-docs mailing list CentOS-docs@centos.org http://lists.centos.org/mailman/listinfo/centos-docs
Re: [CentOS-docs] Tips and Tricks: Install from GRUB
Manuel Wolfshant wrote on 05/27/2010 08:22 AM: ... My example is adequate (and used) for remote upgrades (hence the upgradeany from the kernel line) rather than fresh installs. I don't doubt that it works, but still wonder if the root= is a NOP. ___ CentOS-docs mailing list CentOS-docs@centos.org http://lists.centos.org/mailman/listinfo/centos-docs
Re: [CentOS-docs] Tips and Tricks: Install from GRUB
On Wed, 2010-05-26 at 10:30 -0400, Phil Schaffner wrote: Proposed new page for comment: http://wiki.centos.org/TipsAndTricks/InstallFromGRUB Phil I suggest adding links to some supporting documentation. For example, you could add a prerequisites section saying this technique or trick requires the install media available, either on the network or on the local disk. Instructions for setting up the install media on the network can be found in the Installation guide, chapter 2.5 Preparing for a Network Installation http://centos.org/docs/5/html/5.2/Installation_Guide/s1-steps-network-installs-x86.html Instructions for putting the install media on the local disk can be found in the Installation guide, chapter 2.6 Preparing for a hard drive Installation http://centos.org/docs/5/html/5.2/Installation_Guide/ch02s06.html It looks like the version 5.2 docs are the most recent on the centos.org site. ___ CentOS-docs mailing list CentOS-docs@centos.org http://lists.centos.org/mailman/listinfo/centos-docs
[CentOS-announce] CEBA-2010-0410 CentOS 5 i386 vsftpd Update
CentOS Errata and Bugfix Advisory 2010-0410
Upstream details at : https://rhn.redhat.com/errata/RHBA-2010-0410.html
The following updated files have been uploaded and are currently
syncing to the mirrors: ( md5sum Filename )
i386:
acc3dbc8de0744fc10887b5b97994f89 vsftpd-2.0.5-16.el5_5.1.i386.rpm
Source:
b18ba6cb5952d4cd648c2bbb0b8c8b30 vsftpd-2.0.5-16.el5_5.1.src.rpm
--
Karanbir Singh
CentOS Project { http://www.centos.org/ }
irc: z00dax, #cen...@irc.freenode.net
___
CentOS-announce mailing list
CentOS-announce@centos.org
http://lists.centos.org/mailman/listinfo/centos-announce
[CentOS-announce] CEBA-2010-0410 CentOS 5 x86_64 vsftpd Update
CentOS Errata and Bugfix Advisory 2010-0410
Upstream details at : https://rhn.redhat.com/errata/RHBA-2010-0410.html
The following updated files have been uploaded and are currently
syncing to the mirrors: ( md5sum Filename )
x86_64:
d970499effd032897c90099750df1bac vsftpd-2.0.5-16.el5_5.1.x86_64.rpm
Source:
b18ba6cb5952d4cd648c2bbb0b8c8b30 vsftpd-2.0.5-16.el5_5.1.src.rpm
--
Karanbir Singh
CentOS Project { http://www.centos.org/ }
irc: z00dax, #cen...@irc.freenode.net
___
CentOS-announce mailing list
CentOS-announce@centos.org
http://lists.centos.org/mailman/listinfo/centos-announce
Re: [CentOS-virt] Libvirt NAT-based network 2x-4x faster than Libvirt routed network?
On 05/27/2010 12:21 PM, Aleksei Miheev wrote: Is it typo? There can be no subnet with /32 bit mask, it's single host only. Actually, it is possible: ip addr add xxx.yyy.zzz.215/32 dev eth0 ip route add xxx.yyy.zzz.193 dev eth0 ip route add default via xxx.yyy.zzz.193 Of course you can do that, but it wouldn't a *subnet*. Net like network, system consisting of several units. I rest my case. -- Veiko ___ CentOS-virt mailing list CentOS-virt@centos.org http://lists.centos.org/mailman/listinfo/centos-virt
Re: [CentOS-virt] Libvirt NAT-based network 2x-4x faster than Libvirt routed network?
2010/5/27 Veiko Kukk ve...@ekp.ee: On 05/27/2010 12:21 PM, Aleksei Miheev wrote: Is it typo? There can be no subnet with /32 bit mask, it's single host only. Actually, it is possible: ip addr add xxx.yyy.zzz.215/32 dev eth0 ip route add xxx.yyy.zzz.193 dev eth0 ip route add default via xxx.yyy.zzz.193 Of course you can do that, but it wouldn't a *subnet*. Net like network, system consisting of several units. I rest my case. Well, it is a subnet, it has just only got one host in it. I wrote it because the question is about routing, so it's quite relevant that the IP-addresses are not on the same subnet. No one with any clues on what to test / look into? :-/ Best Regards Kenni ___ CentOS-virt mailing list CentOS-virt@centos.org http://lists.centos.org/mailman/listinfo/centos-virt
[CentOS-virt] 4 CPU with WinXP on Centos 5.5 KVM?
Has anyone had any success getting WinXP 32bit to use 4 CPU's under Centos 5.5 KVM? I have tried everything and the best I can get is 2 CPU's. I tried everything listed here http://www.linux-kvm.com/content/running-windows-smp-guests I am using the VIRTIO drivers. Is this known limitation of KVM-83-164 (Centos5 release) with WinXP 32bit? I think there are reports of it working with 32bit Windows 2003 (or was it Windows 2008?). I know KVM is granting the 4 CPU's since Linux VM can use 4 CPU's on the same computer. Thanks, Marcelino Marcelino Mata Engineering Technology Specialist Multimatic Technical Centre 85 Valleywood Drive Markham, ON Canada L3R 5E5 Tel. +1 905 470 0025 CONFIDENTIALITY NOTE: This email (and attachments, if any) contain(s) information that is PRIVATE and CONFIDENTIAL, and may be LEGALLY PRIVILEGED or otherwise exempt from disclosure under applicable law. All copyright is reserved, and no right or license is granted to duplicate or publish the content of this email or to forward it to third parties, without, in each case, specific permission. If you have received this email in error, you must not copy, distribute, retain or use this email or the information contained in it for any purpose (other than to notify the sender). If you believe that you are not the intended recipient of this email, please contact the sender immediately and delete this email from your computer system (including any archive or other storage facilities). Thank you. ___ CentOS-virt mailing list CentOS-virt@centos.org http://lists.centos.org/mailman/listinfo/centos-virt
Re: [CentOS-virt] 4 CPU with WinXP on Centos 5.5 KVM?
Has anyone had any success getting WinXP 32bit to use 4 CPU's under Centos 5.5 KVM? I have tried everything and the best I can get is 2 CPU's. I tried everything listed here http://www.linux-kvm.com/content/running-windows-smp-guests I am using the VIRTIO drivers. Is this known limitation of KVM-83-164 (Centos5 release) with WinXP 32bit? I think there are reports of it working with 32bit Windows 2003 (or was it Windows 2008?). I know KVM is granting the 4 CPU's since Linux VM can use 4 CPU's on the same computer. Thanks, Marcelino Marcelino, TTBOMK winxp is only going to support 2 physical cpus unless you have a special winxp license that we have not experienced we have never seen more than a 1 or 2 physical cpu version of winxp eh ? - rh ___ CentOS-virt mailing list CentOS-virt@centos.org http://lists.centos.org/mailman/listinfo/centos-virt
Re: [CentOS-virt] 4 CPU with WinXP on Centos 5.5 KVM?
I think he means cores. And XP will see and use 4 cores. ___ CentOS-virt mailing list CentOS-virt@centos.org http://lists.centos.org/mailman/listinfo/centos-virt
[CentOS-es] Problemas con IPTables
Estimados: Tengo un problema con iptables, les comento lo que deseo realizar, tengo un firewall en iptables el cual ha estado funcionando perfectamente con la ip asociada (200.10.10.1). ahora desean publicar un servidor web y un server de correo el cual esta asociado a otra ip (200.10.10.2)la consulta es la siguiente, es recomendado colocar en una misma NIC las 2 Ip publicas una para salida de internet de mi lan y la otra para salida de los server unicamente, es decir se tendria interfaces virtual o es necesario colocar una NIC adidicional a mi server? por otro lado realice la configuracion de mi iptables con interfaces virtual. pero a veces la ip que esta en la interface virtual pierde coneccion, es decir los servicios publicado no son vistos. Si tuvieran alguna recomendacion o sugerencia seria muy bienvenida, les adjunto parate de la conf de mi script de iptables de la publicacion de mis servicio, $IPTABLES -A FORWARD -i $ITFZ_WAN -d $RANGO_IP_DMZ -o $ITFZ_DMZ -m state --state ESTABLISHED,RELATED -j ACCEPT $IPTABLES -t nat -A POSTROUTING -s $EXCHANGE -o $ITFZ_WAN -j SNAT --to-source $IP_WAN_MAIL $IPTABLES -t nat -A PREROUTING -i $ITFZ_WAN -d $IP_WAN_MAIL -p tcp --dport 25 -j DNAT --to-destination $EXCHANGE:25 $IPTABLES -A FORWARD -i $ITFZ_WAN -d $EXCHANGE -o $ITFZ_DMZ -p tcp --dport 25 -m state --state NEW,ESTABLISHED,RELATED -j ACCEPT $IPTABLES -t nat -A PREROUTING -i $ITFZ_WAN -d $IP_WAN_MAIL -p tcp --dport 443 -j DNAT --to-destination $EXCHANGE:443 $IPTABLES -A FORWARD -i $ITFZ_WAN -d $EXCHANGE -o $ITFZ_DMZ -p tcp --dport 443 -m state --state NEW,ESTABLISHED,RELATED -j ACCEPT $IPTABLES -A FORWARD -s $EXCHANGE -d 0/0 -p tcp -j ACCEPT la configuracion de mi script esta totalmente en DROP. Saludos. Jaime A. ___ CentOS-es mailing list CentOS-es@centos.org http://lists.centos.org/mailman/listinfo/centos-es
Re: [CentOS-es] dns en centoe 5.5
Hola amigo solo para comentarles que mi problema ya quedo, lo que pasa es que en esta version no venia ningun named.conf predefinido y lo saque con la herramienta grafica system-config-bind, el cual como les comento me creo un archivo nuevo named.conf virgen, al cual solo le agregue mis zonas, probe y ya arranco mi DNS, saludos El 26/05/10 20:04, Carlos Martinez escribió: Saludos. Tienes declarada al menos una vista y por fuera de ellas estas declarando una o mas zonas. Solucion: 1) Define todas tus zonas dentro de las vistas. ó 2) Elimina la(s) vista(s) Hasta la proxima. Carlos. 2010/5/26 Alejandro Marin Maturanoama...@impi.gob.mx Hola amigos tengo un problema con la instalacion de un DNS en centos 5.5 me sale el siguiente error Error en la configuración de named: /etc/named.conf:18: when using 'view' statements, all zones must be in views [FALLÓ] no se a que se refiere, como que veo que los archivos de configuracion ya son diferentes he instalado otro dns pero la version de centos era la 5.1 y ahi no he tenido problemas saludos ___ CentOS-es mailing list CentOS-es@centos.org http://lists.centos.org/mailman/listinfo/centos-es ___ CentOS-es mailing list CentOS-es@centos.org http://lists.centos.org/mailman/listinfo/centos-es ___ CentOS-es mailing list CentOS-es@centos.org http://lists.centos.org/mailman/listinfo/centos-es
[CentOS-es] ayuda con pure
hola a todos Estoy intentano intalar el pure ya lo intente por alcance libre y agregue un repo pero aun asi no instala el pure tb probe por tar y no tengo respuesta alguna alguien podria ayudarme por favorestoy intentanto hacer un ftp con usuarios virtuales. ___ CentOS-es mailing list CentOS-es@centos.org http://lists.centos.org/mailman/listinfo/centos-es
[CentOS-es] Consulta de rutas estaticas.
amigos necesito de su ayuda, tengo en mi equipo unas rutas que me sirven para poder llegar a conectarme remotamente a una aplicacion web que esta fuera de mi sede: Destination Gateway Genmask Flags Metric RefUse Iface 101.11.5.14192.168.0.222 255.255.255.255 UGH 0 00 eth2 es decir para llegar la IP 101.11.5.14 paso por el gateway 192.168.0.202, hasta hay no hay problema cualquier equipo de mi red 192.168.0.0/24 llega sin problemas a esta web, el problema es q desde otras sub redes no llego. 192.168.6.0/24 deberia de realizar algo adicional ___ CentOS-es mailing list CentOS-es@centos.org http://lists.centos.org/mailman/listinfo/centos-es
Re: [CentOS-es] Consulta de rutas estaticas.
2010/5/27 Jose Bonilla jose.bonilla.ch...@gmail.com: amigos necesito de su ayuda, tengo en mi equipo unas rutas que me sirven para poder llegar a conectarme remotamente a una aplicacion web que esta fuera de mi sede: Destination Gateway Genmask Flags Metric Ref Use Iface 101.11.5.14 192.168.0.222 255.255.255.255 UGH 0 0 0 eth2 es decir para llegar la IP 101.11.5.14 paso por el gateway 192.168.0.202, hasta hay no hay problema cualquier equipo de mi red 192.168.0.0/24 llega sin problemas a esta web, el problema es q desde otras sub redes no llego. 192.168.6.0/24 deberia de realizar algo adicional Nos falta más información sobre la topología. Dónde se conectan los de la red 192.168.6.0/24? Cómo es la regla de ruteo que tienen esos equipos para llegar al host de tu aplicación? Esta que muestras no sirve porque solamente les permite llegar a los equipos sobre 192.168.0.0/24. Recuerda que para cualquier regla, el gateway debe estar en una red conocida. Además el equipo situado en 101.11.5.14 debe tener la ruta inversa tanto a los de la red 192.168.0.0 como a los de la 192.168.6.0. -- Eduardo Grosclaude Universidad Nacional del Comahue Neuquen, Argentina ___ CentOS-es mailing list CentOS-es@centos.org http://lists.centos.org/mailman/listinfo/centos-es
Re: [CentOS-es] supongo problema dns
2010/5/27 victor santana reparaciononl...@gmail.com: Hola a t...@s, a ver si alguien puede darme alguna idea al respecto. Resulta que mi servidor de correo con varios dominios, cada uno con su ip, no deja entrar correos de hotmail, terra,yahoo, pero de gmail si deja. Bien, ni siquiera sale en los maillogs y tampoco me llega devuelto de inmediato Otros logs que no sean de transferencias ...como el messages? Se puede levantar el nivel de detalle de los logs? -- Eduardo Grosclaude Universidad Nacional del Comahue Neuquen, Argentina ___ CentOS-es mailing list CentOS-es@centos.org http://lists.centos.org/mailman/listinfo/centos-es
Re: [CentOS-es] Problemas con IPTables
Yo tengo 3 conexiones a internet balanceadas, te recomiendo mires: http://www.shorewall.net/MultiISP.html Al final instalé esta utilidad que me resulta mucho más amigable de configurar que iptables. El 27 de mayo de 2010 00:13, Jaime Aguirre jaime.aguirr...@gmail.comescribió: Estimados: Tengo un problema con iptables, les comento lo que deseo realizar, tengo un firewall en iptables el cual ha estado funcionando perfectamente con la ip asociada (200.10.10.1). ahora desean publicar un servidor web y un server de correo el cual esta asociado a otra ip (200.10.10.2)la consulta es la siguiente, es recomendado colocar en una misma NIC las 2 Ip publicas una para salida de internet de mi lan y la otra para salida de los server unicamente, es decir se tendria interfaces virtual o es necesario colocar una NIC adidicional a mi server? por otro lado realice la configuracion de mi iptables con interfaces virtual. pero a veces la ip que esta en la interface virtual pierde coneccion, es decir los servicios publicado no son vistos. Si tuvieran alguna recomendacion o sugerencia seria muy bienvenida, les adjunto parate de la conf de mi script de iptables de la publicacion de mis servicio, $IPTABLES -A FORWARD -i $ITFZ_WAN -d $RANGO_IP_DMZ -o $ITFZ_DMZ -m state --state ESTABLISHED,RELATED -j ACCEPT $IPTABLES -t nat -A POSTROUTING -s $EXCHANGE -o $ITFZ_WAN -j SNAT --to-source $IP_WAN_MAIL $IPTABLES -t nat -A PREROUTING -i $ITFZ_WAN -d $IP_WAN_MAIL -p tcp --dport 25 -j DNAT --to-destination $EXCHANGE:25 $IPTABLES -A FORWARD -i $ITFZ_WAN -d $EXCHANGE -o $ITFZ_DMZ -p tcp --dport 25 -m state --state NEW,ESTABLISHED,RELATED -j ACCEPT $IPTABLES -t nat -A PREROUTING -i $ITFZ_WAN -d $IP_WAN_MAIL -p tcp --dport 443 -j DNAT --to-destination $EXCHANGE:443 $IPTABLES -A FORWARD -i $ITFZ_WAN -d $EXCHANGE -o $ITFZ_DMZ -p tcp --dport 443 -m state --state NEW,ESTABLISHED,RELATED -j ACCEPT $IPTABLES -A FORWARD -s $EXCHANGE -d 0/0 -p tcp -j ACCEPT la configuracion de mi script esta totalmente en DROP. Saludos. Jaime A. ___ CentOS-es mailing list CentOS-es@centos.org http://lists.centos.org/mailman/listinfo/centos-es -- ___ REPARACIONONLINE GARANTIA PARA SU PC ___ CentOS-es mailing list CentOS-es@centos.org http://lists.centos.org/mailman/listinfo/centos-es
[CentOS] [URGENT] Assistance Requested in Looking for Dr Francis T. Seow, Harvard Law School Research Fellow
Hi, First, I would like to apologize for the out-of-topic post. I will keep this as short as I possibly could. Does anybody know Dr. Francis T. Seow, the former Solicitor-General from the Republic of Singapore? I want to contact him but can't seem to find his email address or telephone number on the internet. Could you help me? Do you also know how I can contact all the justices of the Judicial Committee of the UK Privy Council and all the Lords of the UK House of Lords? According to the UK Parliament website, it says that many Peers do not have public email addresses. I would like to apologize again for using this platform to get my message across as my email accounts may have been compromised. Thank you very much. Yours sincerely, Mr. Teo En Ming Hanyu Pinyin Name: Zhang Enming Facebook: Teo En Ming (Zhang Enming) Photo (1): http://img26.imageshack.us/img26/7534/enmingteodscf2511.jpg Photo (2): http://i.imgur.com/CLifZ.jpg Mobile Phone (Starhub Pre-paid): +65-8369-2618 Singapore Citizen ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] Logrotation with retention period
On Thu, May 27, 2010 at 7:37 AM, James Corteciano ja...@linux-source.org wrote: Is it possible that the output after doing logrotate could be like the below sample. All compressed logs will be keep until 6 months only. I know there is man page / docs in internet but I can't get the exact configuration to use. (a) man logrotate is available on your in installed system and try to follow the examples in the man page. The cycles are daily/monthly/yearly. For 6 month rotation you can choose monthly and make rotate = 6 or higher (also allow size large enough to avoid log rotation overwrite). [hostname]# ls /var/log/mysql/ 2010.05.01.gz 2010.05.02.gz 2010.05.03.gz 2010.05.27/general.log 2010.05.27/report.log -- Arun Khan ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] [URGENT] Assistance Requested in Looking for Dr Francis T. Seow, Harvard Law School Research Fellow
Dear Christopher, I have sent countless emails to many governmental, non-governmental and international organizations in the world with the subject Plea for Medical Help/Assistance. But surprisingly I get very few replies. Maybe the replies have been deleted or the emails I sent have been deleted. EDIT: I overheard my neighbours claiming to have passwords/access to my email accounts. --- Mr. Teo En Ming Hanyu Pinyin Name: Zhang Enming Facebook: Teo En Ming (Zhang Enming) Photo (1): http://img26.imageshack.us/img26/7534/enmingteodscf2511.jpg Photo (2): http://i.imgur.com/CLifZ.jpg Mobile Phone (Starhub Pre-paid): +65-8369-2618 Singapore Citizen On 05/27/2010 01:59 PM, Christopher Chan wrote: Do you also know how I can contact all the justices of the Judicial Committee of the UK Privy Council and all the Lords of the UK House of Lords? According to the UK Parliament website, it says that many Peers do not have public email addresses. In Lucid you will find them in /etc/email/PrivyCouncil.txt and /etc/email/HouseOfLords.txt Or he could just ask the Lord of Privies. In fact, I reckon he'd even be invited for tea too. ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] [URGENT] Assistance Requested in Looking for Dr Francis T. Seow, Harvard Law School Research Fellow
Assistance Requested in Looking for Dr Francis T. Seow, Harvard Law School Research Fellow Maybe you should start by contacting Harvard? This is a list for CentOS users, have you ever seen this fellow on here before? Maybe you should search the archives first? I noticed you also posted this message to the Ubuntu tech help mailing list; have you ever seen him on there either? Who is the bloke anyway? Is he just some bloke who has nothing to do with either CentOS or Ubuntu because if that is the case what are you doing? Use a phone book, contact Harvard, use Facebook, whatever. What are the odds of someone here knowing him? Btw, does anyone here have some contact details for Batman? Do you also know how I can contact all the justices of the Judicial Committee of the UK Privy Council and all the Lords of the UK House of Lords? According to the UK Parliament website, it says that many Peers do not have public email addresses. Write them a letter, ring them up, I don't know and I don't care, stop sending this email to multiple lists which I also happen to be on and spamming my inbox. This is not a directory service. -- Regards, James. http://www.jamesbensley.co.cc/ - There are only 10 kinds of people in the world, those who understand trinary, those who don't understand trinary and those who don't understand trinary. ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] [URGENT] Assistance Requested in Looking for Dr Francis T. Seow, Harvard Law School Research Fellow
Dear James, I apologize but I am really not spamming. I am really sending a genuine medical plea. On 05/27/2010 06:24 PM, James Bensley wrote: Assistance Requested in Looking for Dr Francis T. Seow, Harvard Law School Research Fellow Maybe you should start by contacting Harvard? This is a list for CentOS users, have you ever seen this fellow on here before? Maybe you should search the archives first? I noticed you also posted this message to the Ubuntu tech help mailing list; have you ever seen him on there either? Who is the bloke anyway? Is he just some bloke who has nothing to do with either CentOS or Ubuntu because if that is the case what are you doing? Use a phone book, contact Harvard, use Facebook, whatever. What are the odds of someone here knowing him? Btw, does anyone here have some contact details for Batman? I have actually sent out emails to the entire faculties of the Harvard Law School and Harvard Kennedy School of Government. Do you also know how I can contact all the justices of the Judicial Committee of the UK Privy Council and all the Lords of the UK House of Lords? According to the UK Parliament website, it says that many Peers do not have public email addresses. Write them a letter, ring them up, I don't know and I don't care, stop sending this email to multiple lists which I also happen to be on and spamming my inbox. This is not a directory service. I have also sent emails to the House of Lords Office and the Privy Council. But I don't have the email addresses of individual lords. The thing is that my inboxes are quiet. I apologize. Thank you very much. ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] [URGENT] Assistance Requested in Looking for Dr Francis T. Seow, Harvard Law School Research Fellow
Mr. Teo En Ming (Zhang Enming) writes: Dear James, I apologize but I am really not spamming. I am really sending a genuine medical plea. You also sent to openbsd-misc and who knows where, so by definition, you are a spammer. Go away. --- This message and any attachments may contain Cypress (or its subsidiaries) confidential information. If it has been received in error, please advise the sender and immediately delete this message. --- ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] [URGENT] Assistance Requested in Looking for Dr Francis T. Seow, Harvard Law School Research Fellow
On Thu, May 27, 2010 at 12:39 PM, lheck...@users.sourceforge.net wrote: Mr. Teo En Ming (Zhang Enming) writes: Dear James, I apologize but I am really not spamming. I am really sending a genuine medical plea. You also sent to openbsd-misc and who knows where, so by definition, you are a spammer. Go away. ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos Don't take this the wrong way, but you are trying to reach someone who probably has nothing todo with this, or most other Linux related mailing lists. And you're making a lot of people angry by doing this. Phone harvard, or google his name. Or drive there and ask someone where he is. or something. P.S. Stop apologizing as well, just stop posting to these lists, it's probably for your own good. -- Kind Regards Rudi Ahlers SoftDux Website: http://www.SoftDux.com Technical Blog: http://Blog.SoftDux.com Office: 087 805 9573 Cell: 082 554 7532 ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] [URGENT] Assistance Requested in Looking for Dr Francis T. Seow, Harvard Law School Research Fellow
On 27 May 2010 11:35, Mr. Teo En Ming (Zhang Enming) space.time.unive...@gmail.com wrote: Dear James, I apologize but I am really not spamming. I am really sending a genuine medical plea. But this isn't a genuine medical forum, someone has lied to you, the same goes for all the other lists you have been writing to. You are by definition, spamming and thusly violating the list rules and etiquette, may the admins have mercy on YOU! I wouldn't. -- Regards, James. http://www.jamesbensley.co.cc/ - There are only 10 kinds of people in the world, those who understand trinary, those who don't understand trinary and those who don't understand trinary. ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] AQuA Powered Voice Quality Monitoring Solution
On Wed, May 26, 2010 at 12:42:48PM +0400, Sevana Oy wrote: Overview unsubscribed -- Tru Huynh (mirrors, CentOS-3 i386/x86_64 Package Maintenance) http://pgp.mit.edu:11371/pks/lookup?op=getsearch=0xBEFA581B pgphaa8x1iReB.pgp Description: PGP signature ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] [URGENT] Assistance Requested in Looking for Dr Francis T. Seow, Harvard Law School Research Fellow
On Thu, May 27, 2010 at 02:49:30PM +0800, Mr. Teo En Ming (Zhang Enming) wrote: Hi, First, I would like to apologize for the out-of-topic post. I will keep this as short as I possibly could. unsubscribed Tru -- Tru Huynh (mirrors, CentOS-3 i386/x86_64 Package Maintenance) http://pgp.mit.edu:11371/pks/lookup?op=getsearch=0xBEFA581B pgpFJmq36y1Zv.pgp Description: PGP signature ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] Having trouble with LDAP Authentication...
Ryan and Paul... Thank you for your suggestions and help I was able to track it down to three separate things: an improper ACL, nscd, and iptables. Everything is working fine now. Again, thanks for your insight! -- Andy Akins Director of Development NICUSA, Tennessee A Partnership with Tennessee.gov Phone: (615) 313-0305 Email: a...@egovtn.org Visit www.tn.gov - the official website of the State of Tennessee * CONFIDENTIALITY NOTICE: This email and any attachments are confidential. If you are not the intended recipient, you do not have permission to disclose, copy, distribute, or open any attachments. If you have received this email in error, please notify us immediately by returning it to the sender and deleting this copy from your system. Thank you. NIC, Inc., Tennessee * ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
[CentOS] question on CPU
I have centos 5.4 on an HP laptop, as below the /proc/cpuinfo shows Dual core, however, there is only 1 processor listed in /proc/cpuinfo. Is the OS only using a single core? jerry -- processor : 0 vendor_id : AuthenticAMD cpu family : 17 model : 3 model name : AMD Turion(tm) X2 Ultra Dual-Core Mobile ZM-86 stepping: 1 cpu MHz : 2400.000 cache size : 1024 KB physical id : 0 siblings: 1 core id : 0 cpu cores : 1 ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] Odd failure of smbd to start from init.d - CentOS 5.4 - it's that fine SELinux
On 05/26/2010 08:23 PM, Gordon Messmer wrote: On 05/26/2010 08:44 AM, Benjamin Franz wrote: [...] The *theoretical* system security improvement of SELinux is trumped by the *practical* observation that I have had existing systems broken by SELinux multiple times on the mere handful of systems I have run it on in enforcing mode, but have yet to see a single one of several dozen (all internet exposed) up-to-date *non*-SELinux systems hacked. You are comparing two unlike things. You can't very well judge the benefits of SELinux based on a system which hasn't needed its protection. I'm comparing a simple metric that applies to *ANY* system admin job: (Downtime) / (Machines * Years) The metric *DOESN'T CARE* if that downtime is because of bad power, hard drive crashes, hackers, cosmic rays, SELinux, or poor admining. It cares that the services are offline, on how many machines and for how long. Arguing that I'm comparing apple and oranges is like claiming that (using my analogy of faulty air bags again) it isn't *meaningful* for me to say that faulty airbags that go off randomly while driving is a bigger hazard than car accidents for me because I haven't had any car crashes specifically needing air bags: The airbag going off randomly while I'm driving is very likely to *cause* a serious car accident itself. I'm measuring *all* serious accidents - not just 'accidents where the airbag might have gone off'. A 'safety feature' that *causes* more damage than it prevents isn't a safety feature - it's a hazard. And on otherwise properly maintained systems, SELinux is a hazard. It is a 'safety' feature that is in practice more dangerous to system stability than what it is trying to fix. I advise administrators to test all updates on non-production systems. SELinux updates are no exception. __ I have *twenty* virtual machines I deploy updates to before it ever touches my production systems. Not everything is testable on non-production machines. Nor, as the system admin, senior programmer and desktop support person for the entire company do I have the sheer time needed to test every sub-system before deployment. And I shouldn't damn well *need* to on a normal system update to an Enterprise grade distribution (I'm not knocking the CentOS team here - this is about Redhat and SELinux). SELinux makes my systems significantly *LESS* reliable instead of *MORE* reliable. And that is a bad thing. Now back to fixing the SELinux configuration on a machine I had to put in 'permissive' mode a few weeks ago because the last round of SELinux updates broke the web server's ability to open its own log files. That is what I still have left to fix after having to relabel the entire system to fix the other breakages the update introduced. And no - I'm not kidding or making things up. -- Benjamin Franz ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] Installing from USB flash drive
JohnS wrote: For others that are saying it want update the boot config then you may have something wrong somewhere because it should plain out update it. We know that it should update the boot config. And under most circumstances, it does. The problem is that under some conditions, while the boot config is updated with the new kernel information, the default= line is changed so that it points at the old kernel rather than the new one. So far, we don't fully understand why this happens. My theory is that it has something to do with manually creating the config file. I have not tested this yet, but I would guess that if you removed the comments at the top of the grub.conf file and then did a kernel update, you would see this behavior. -- Bowie ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] question on CPU
On 05/27/2010 03:47 PM, Jerry Geis wrote: I have centos 5.4 on an HP laptop, as below the /proc/cpuinfo shows Dual core, however, there is only 1 processor listed in /proc/cpuinfo. Is the OS only using a single core? Check the BIOS, I have seen HP desktops that have option in BIOS to turn off multicore support. Then only single core is exposed to the OS. -- Veiko ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] question on CPU
How many processors are shown in your process monitor/activity monitor? -- Regards, James. http://www.jamesbensley.co.cc/ - There are only 10 kinds of people in the world, those who understand trinary, those who don't understand trinary and those who don't understand trinary. ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
[CentOS] Multipathing with Sun 7310
Dear list, we have a relatively new Sun Storage 7310, where we connect CentOS 5.5 Servers (IBM LS21/LS41 Blades) via Brocade Switches, 4GBit FC. The Blades boot from SAN via qla2xxx, and have no harddisks at all. We want them to use multipathing from the very beginning, so /boot and / are already seen by multipathd. Problem is, that the Sun 7310 has two storage heads which run in active/passive mode. BUT the multipathd thinks, they are active/active and therefor shows half the available paths as faulty (multipath -ll below) While this probably gives me the redundancy that is desired, it is a relatively messy situation, since it will be unnecessary hard to detect real path failures and the OS is complaining about readsector0 checker reports path is down which gives me 40M/24h /var/log/messages garbage. Any hints for a reasonable configuration? Unfortunately the Sun 7310 is rather new, so almost nothing shows up on google... even less for RHEL/CentOS :-( regards from Berlin Jens [r...@dev-db1 tmp]# multipath -ll sdaa: checker msg is readsector0 checker reports path is down sdab: checker msg is readsector0 checker reports path is down sdac: checker msg is readsector0 checker reports path is down sdad: checker msg is readsector0 checker reports path is down sdd: checker msg is readsector0 checker reports path is down sdh: checker msg is readsector0 checker reports path is down sdl: checker msg is readsector0 checker reports path is down sdp: checker msg is readsector0 checker reports path is down sdq: checker msg is readsector0 checker reports path is down sdr: checker msg is readsector0 checker reports path is down sds: checker msg is readsector0 checker reports path is down sdt: checker msg is readsector0 checker reports path is down sdu: checker msg is readsector0 checker reports path is down sdv: checker msg is readsector0 checker reports path is down sdx: checker msg is readsector0 checker reports path is down sdz: checker msg is readsector0 checker reports path is down mpath0 (3600144f0fdf58b5c4bc738070001) dm-0 SUN,Sun Storage 7310 [size=50G][features=0][hwhandler=0][rw] \_ round-robin 0 [prio=1][active] \_ 0:0:1:0 sda 8:0[active][ready] \_ round-robin 0 [prio=1][enabled] \_ 1:0:0:0 sde 8:64 [active][ready] \_ round-robin 0 [prio=1][enabled] \_ 0:0:2:0 sdi 8:128 [active][ready] \_ round-robin 0 [prio=1][enabled] \_ 1:0:1:0 sdm 8:192 [active][ready] \_ round-robin 0 [prio=0][enabled] \_ 0:0:3:0 sdq 65:0 [failed][faulty] \_ round-robin 0 [prio=0][enabled] \_ 1:0:2:0 sdr 65:16 [failed][faulty] \_ round-robin 0 [prio=0][enabled] \_ 0:0:4:0 sdx 65:112 [failed][faulty] \_ round-robin 0 [prio=0][enabled] \_ 1:0:3:0 sdz 65:144 [failed][faulty] ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] question on CPU
On 5/27/2010 9:25 AM, James Bensley wrote: How many processors are shown in your process monitor/activity monitor? In order to view the number of cpu's in top, press the '1' key. You will then see cpu0, cpu1, cpu2, etc. if there is more than 1 core detected. Ryan Manikowski ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] Odd failure of smbd to start from init.d - CentOS 5.4 - it's that fine SELinux
On Thu, 2010-05-27 at 05:55 -0700, Jerry Franz wrote: On 05/26/2010 08:23 PM, Gordon Messmer wrote: On 05/26/2010 08:44 AM, Benjamin Franz wrote: [...] The *theoretical* system security improvement of SELinux is trumped by the *practical* observation that I have had existing systems broken by SELinux multiple times on the mere handful of systems I have run it on in enforcing mode, but have yet to see a single one of several dozen (all internet exposed) up-to-date *non*-SELinux systems hacked. You are comparing two unlike things. You can't very well judge the benefits of SELinux based on a system which hasn't needed its protection. I'm comparing a simple metric that applies to *ANY* system admin job: (Downtime) / (Machines * Years) The metric *DOESN'T CARE* if that downtime is because of bad power, hard drive crashes, hackers, cosmic rays, SELinux, or poor admining. It cares that the services are offline, on how many machines and for how long. Arguing that I'm comparing apple and oranges is like claiming that (using my analogy of faulty air bags again) it isn't *meaningful* for me to say that faulty airbags that go off randomly while driving is a bigger hazard than car accidents for me because I haven't had any car crashes specifically needing air bags: The airbag going off randomly while I'm driving is very likely to *cause* a serious car accident itself. I'm measuring *all* serious accidents - not just 'accidents where the airbag might have gone off'. A 'safety feature' that *causes* more damage than it prevents isn't a safety feature - it's a hazard. And on otherwise properly maintained systems, SELinux is a hazard. It is a 'safety' feature that is in practice more dangerous to system stability than what it is trying to fix. I advise administrators to test all updates on non-production systems. SELinux updates are no exception. __ I have *twenty* virtual machines I deploy updates to before it ever touches my production systems. Not everything is testable on non-production machines. Nor, as the system admin, senior programmer and desktop support person for the entire company do I have the sheer time needed to test every sub-system before deployment. And I shouldn't damn well *need* to on a normal system update to an Enterprise grade distribution (I'm not knocking the CentOS team here - this is about Redhat and SELinux). SELinux makes my systems significantly *LESS* reliable instead of *MORE* reliable. And that is a bad thing. Now back to fixing the SELinux configuration on a machine I had to put in 'permissive' mode a few weeks ago because the last round of SELinux updates broke the web server's ability to open its own log files. That is what I still have left to fix after having to relabel the entire system to fix the other breakages the update introduced. And no - I'm not kidding or making things up. I guess I don't understand because I have not had to relabel entire filesystems unless I have disabled SELinux and have never experienced an update that 'broke' things on CentOS (Fedora is a different issue but that is more experimental). Most of the people I see griping about SElinux just don't want to be bothered with it and just turn it off or they are forced to use it and don't spend the time learning the tools. It's relatively simple to set file contexts or policy and I just don't see the downtime being a factor anywhere. Craig -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] question on CPU
On 05/27/2010 03:47 PM, Jerry Geis wrote: / I have centos 5.4 on an HP laptop, as below the /proc/cpuinfo shows Dual // core, // however, there is only 1 processor listed in /proc/cpuinfo. // // Is the OS only using a single core? / Check the BIOS, I have seen HP desktops that have option in BIOS to turn off multicore support. Then only single core is exposed to the OS. Looked in the BIOS and there was no setting. Top is only showing 1 CPU. Jerry ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] Calendar server software suggestions
Thanks for all suggestions ~ ^-^ ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] Calendar server software suggestions
sync wrote: Thanks for all suggestions ~ ^-^ So, don't leave us hanging by suspenders, tell us what you've decided on! mark ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] Multipathing with Sun 7310
Dear list,
we have a relatively new Sun Storage 7310, where we connect CentOS 5.5
Servers (IBM LS21/LS41 Blades) via Brocade Switches, 4GBit FC. The Blades
boot from SAN via qla2xxx, and have no harddisks at all. We want them to
use multipathing from the very beginning, so /boot and / are already seen
by multipathd. Problem is, that the Sun 7310 has two storage heads which
run in active/passive mode. BUT the multipathd thinks, they are
active/active and therefor shows half the available paths as faulty
(multipath -ll below)
While this probably gives me the redundancy that is desired, it is a
relatively messy situation, since it will be unnecessary hard to detect
real path failures and the OS is complaining about readsector0 checker
reports path is down which gives me 40M/24h /var/log/messages garbage.
Any hints for a reasonable configuration? Unfortunately the Sun 7310 is
rather new, so almost nothing shows up on google... even less for
RHEL/CentOS :-(
regards from Berlin
Jens
[r...@dev-db1 tmp]# multipath -ll
sdaa: checker msg is readsector0 checker reports path is down
sdab: checker msg is readsector0 checker reports path is down
sdac: checker msg is readsector0 checker reports path is down
sdad: checker msg is readsector0 checker reports path is down
sdd: checker msg is readsector0 checker reports path is down
sdh: checker msg is readsector0 checker reports path is down
sdl: checker msg is readsector0 checker reports path is down
sdp: checker msg is readsector0 checker reports path is down
sdq: checker msg is readsector0 checker reports path is down
sdr: checker msg is readsector0 checker reports path is down
sds: checker msg is readsector0 checker reports path is down
sdt: checker msg is readsector0 checker reports path is down
sdu: checker msg is readsector0 checker reports path is down
sdv: checker msg is readsector0 checker reports path is down
sdx: checker msg is readsector0 checker reports path is down
sdz: checker msg is readsector0 checker reports path is down
mpath0 (3600144f0fdf58b5c4bc738070001) dm-0 SUN,Sun Storage 7310
[size=50G][features=0][hwhandler=0][rw]
\_ round-robin 0 [prio=1][active]
\_ 0:0:1:0 sda 8:0[active][ready]
\_ round-robin 0 [prio=1][enabled]
\_ 1:0:0:0 sde 8:64 [active][ready]
\_ round-robin 0 [prio=1][enabled]
\_ 0:0:2:0 sdi 8:128 [active][ready]
\_ round-robin 0 [prio=1][enabled]
\_ 1:0:1:0 sdm 8:192 [active][ready]
\_ round-robin 0 [prio=0][enabled]
\_ 0:0:3:0 sdq 65:0 [failed][faulty]
\_ round-robin 0 [prio=0][enabled]
\_ 1:0:2:0 sdr 65:16 [failed][faulty]
\_ round-robin 0 [prio=0][enabled]
\_ 0:0:4:0 sdx 65:112 [failed][faulty]
\_ round-robin 0 [prio=0][enabled]
\_ 1:0:3:0 sdz 65:144 [failed][faulty]
Hello Jens,
looks like your multipathing setup is using multibus path_grouping_policy.
Did you create a custom /etc/multipath.conf? You should have. As your
device is new and not known with proper defaults by the
device-mapper-multipath you will have to set the path_grouping_policy
explicitly.
devices {
device {
vendor SUN
product Sun Storage 7310== REMARK
path_grouping_policy failover
getuid_callout /sbin/scsi_id -g -u -s /block/%n
prio_callout /sbin/mpath_prio_rdac /dev/%n
features 0
hardware_handler 1 rdac
path_grouping_policy group_by_prio
failback immediate
rr_weight uniform
no_path_retry queue
rr_min_io 1000
path_checker rdac
}
}
REMARK: to detect the proper product name issue for instance:
cat /sys/block/sda/device/model
Restart the multipathd after editing the multipath.conf and I expect
`multipath -ll or `multipathd -kshow paths' will show you the paths
correctly weighted.
Regards
Alexander
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] question on CPU
On Thu, May 27, 2010 at 10:38 AM, Jerry Geis ge...@pagestation.com wrote: Looked in the BIOS and there was no setting. Top is only showing 1 CPU. What kernel are you running? 'uname -a' output? ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] question on CPU
lists-centos wrote: Original Message Date: Thursday, May 27, 2010 10:38:34 AM -0400 From: Jerry Geis ge...@pagestation.com On 05/27/2010 03:47 PM, Jerry Geis wrote: / I have centos 5.4 on an HP laptop, as below the /proc/cpuinfo shows Dual // core, // however, there is only 1 processor listed in /proc/cpuinfo. // // Is the OS only using a single core? / Check the BIOS, I have seen HP desktops that have option in BIOS to turn off multicore support. Then only single core is exposed to the OS. Looked in the BIOS and there was no setting. Top is only showing 1 CPU. look in /var/log/dmesg, that will show what was found during the boot process (and perhaps provide other insights). - Richard powernow-k8: Found 1 AMD Turion(tm) X2 Ultra Dual-Core Mobile ZM-86 processors (1 cpu cores) (version 2.20.00) powernow-k8:0 : fid 0x0 gid 0x0 (2400 MHz) powernow-k8:1 : fid 0x0 gid 0x0 (1200 MHz) powernow-k8:2 : fid 0x0 gid 0x0 (600 MHz) Did they give me a bad processor. jerry ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] question on CPU
Jerry Geis wrote: lists-centos wrote: Original Message Date: Thursday, May 27, 2010 10:38:34 AM -0400 From: Jerry Geis ge...@pagestation.com On 05/27/2010 03:47 PM, Jerry Geis wrote: / I have centos 5.4 on an HP laptop, as below the /proc/cpuinfo shows Dual // core, // however, there is only 1 processor listed in /proc/cpuinfo. // // Is the OS only using a single core? / Check the BIOS, I have seen HP desktops that have option in BIOS to turn off multicore support. Then only single core is exposed to the OS. Looked in the BIOS and there was no setting. Top is only showing 1 CPU. look in /var/log/dmesg, that will show what was found during the boot process (and perhaps provide other insights). - Richard powernow-k8: Found 1 AMD Turion(tm) X2 Ultra Dual-Core Mobile ZM-86 processors (1 cpu cores) (version 2.20.00) powernow-k8:0 : fid 0x0 gid 0x0 (2400 MHz) powernow-k8:1 : fid 0x0 gid 0x0 (1200 MHz) powernow-k8:2 : fid 0x0 gid 0x0 (600 MHz) Did they give me a bad processor. jerry I am now running stock centos 5.5 x86_64. jerry ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] question on CPU
On 05/27/2010 01:47 PM, Jerry Geis wrote: I have centos 5.4 on an HP laptop, as below the /proc/cpuinfo shows Dual core, however, there is only 1 processor listed in /proc/cpuinfo. Is the OS only using a single core? jerry What's the status of ACPI? Is it enabled in the bios? Is the acpi service installed and running? ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] question on CPU
From: Ned Slider Sent: Thursday, May 27, 2010 11:16 Subject: Re: [CentOS] question on CPU On 05/27/2010 01:47 PM, Jerry Geis wrote: I have centos 5.4 on an HP laptop, as below the /proc/cpuinfo shows Dual core, however, there is only 1 processor listed in /proc/cpuinfo. Is the OS only using a single core? jerry What's the status of ACPI? Still have not seen the uname -a output... Is it enabled in the bios? Is the acpi service installed and running? -- -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- - - - Jason Pyeron PD Inc. http://www.pdinc.us - - Principal Consultant 10 West 24th Street #100- - +1 (443) 269-1555 x333Baltimore, Maryland 21218 - - - -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- This message is copyright PD Inc, subject to license 20080407P00. ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] Multipathing with Sun 7310
Hi Alexander,
thanks for replying, here's my current multipath.conf:
defaults {
user_friendly_names yes
}
blacklist {
devnode ^(ram|raw|loop|fd|md|dm-|sr|scd|st)[0-9]*
devnode ^(hd|xvd|vd)[a-z]*
wwid *
}
blacklist_exceptions {
wwid 3600144f0fdf58b5c4bc738070001
devices{
device {
vendor SUN
product Sun Storage 7310
}
}
}
devices {
device {
vendor SUN
product Sun Storage 7310
path_grouping_policy failover
getuid_callout /sbin/scsi_id -g -u -s /block/%n
prio_callout /sbin/mpath_prio_rdac /dev/%n
features 0
failback immediate
rr_weight uniform
no_path_retry queue
rr_min_io 1000
}
}
I added path_grouping_policy failover because of your message. I also
noticed, you have path_grouping_policy specified twice; is this on
purpose?
Also, when I activate 'hardware_handler 1 rdac', the box does not boot
any more with some rdac driver error message that I can catch since it
scrolls by fast...
with the above multipath.conf it gets even stranger:
[r...@dev-db1 ~]# multipath -ll
sdd: checker msg is readsector0 checker reports path is down
sdh: checker msg is readsector0 checker reports path is down
sdi: checker msg is readsector0 checker reports path is down
sdj: checker msg is readsector0 checker reports path is down
C9 Inquiry of device /dev/sda failed.
C9 Inquiry of device /dev/sde failed.
mpath0 (3600144f0fdf58b5c4bc738070001) dm-0 SUN,Sun Storage 7310
[size=50G][features=1 queue_if_no_path][hwhandler=0][rw]
\_ round-robin 0 [prio=0][active]
\_ 0:0:1:0 sda 8:0 [active][ready]
\_ 1:0:0:0 sde 8:64 [active][ready]
however, the system lives happily, despite the error messages.
Jens Neu
Health Services Network Administration
Phone: +49 (0) 30 68905-2412
Mail: jens@biotronik.de
Alexander Dalloz ad+li...@uni-x.org
Sent by: centos-boun...@centos.org
05/27/2010 04:47 PM
Please respond to
CentOS mailing list centos@centos.org
To
CentOS mailing list centos@centos.org
cc
Subject
Re: [CentOS] Multipathing with Sun 7310
Dear list,
we have a relatively new Sun Storage 7310, where we connect CentOS 5.5
Servers (IBM LS21/LS41 Blades) via Brocade Switches, 4GBit FC. The
Blades
boot from SAN via qla2xxx, and have no harddisks at all. We want them to
use multipathing from the very beginning, so /boot and / are already
seen
by multipathd. Problem is, that the Sun 7310 has two storage heads which
run in active/passive mode. BUT the multipathd thinks, they are
active/active and therefor shows half the available paths as faulty
(multipath -ll below)
While this probably gives me the redundancy that is desired, it is a
relatively messy situation, since it will be unnecessary hard to detect
real path failures and the OS is complaining about readsector0 checker
reports path is down which gives me 40M/24h /var/log/messages garbage.
Any hints for a reasonable configuration? Unfortunately the Sun 7310 is
rather new, so almost nothing shows up on google... even less for
RHEL/CentOS :-(
regards from Berlin
Jens
[r...@dev-db1 tmp]# multipath -ll
sdaa: checker msg is readsector0 checker reports path is down
sdab: checker msg is readsector0 checker reports path is down
sdac: checker msg is readsector0 checker reports path is down
sdad: checker msg is readsector0 checker reports path is down
sdd: checker msg is readsector0 checker reports path is down
sdh: checker msg is readsector0 checker reports path is down
sdl: checker msg is readsector0 checker reports path is down
sdp: checker msg is readsector0 checker reports path is down
sdq: checker msg is readsector0 checker reports path is down
sdr: checker msg is readsector0 checker reports path is down
sds: checker msg is readsector0 checker reports path is down
sdt: checker msg is readsector0 checker reports path is down
sdu: checker msg is readsector0 checker reports path is down
sdv: checker msg is readsector0 checker reports path is down
sdx: checker msg is readsector0 checker reports path is down
sdz: checker msg is readsector0 checker reports path is down
mpath0 (3600144f0fdf58b5c4bc738070001) dm-0 SUN,Sun Storage 7310
[size=50G][features=0][hwhandler=0][rw]
\_ round-robin 0 [prio=1][active]
\_ 0:0:1:0 sda 8:0[active][ready]
\_ round-robin 0 [prio=1][enabled]
\_ 1:0:0:0 sde 8:64 [active][ready]
\_ round-robin 0 [prio=1][enabled]
\_ 0:0:2:0 sdi 8:128 [active][ready]
\_ round-robin 0 [prio=1][enabled]
\_ 1:0:1:0 sdm 8:192 [active][ready]
\_ round-robin 0 [prio=0][enabled]
\_ 0:0:3:0 sdq 65:0 [failed][faulty]
\_ round-robin 0 [prio=0][enabled]
\_ 1:0:2:0 sdr 65:16 [failed][faulty]
\_ round-robin 0 [prio=0][enabled]
\_ 0:0:4:0 sdx 65:112 [failed][faulty]
\_ round-robin
[CentOS] sandbox complaint
Updating a system from CentOS 5.4 (current) to 5.5, and I see: libsepol.scope_copy_callback: zosremote: Duplicate declaration in module: type/attribute zos_remote_t libsemanage.semanage_link_sandbox: Link packages failed semodule: Failed! Any ideas as to what's going on, or why? mark glad selinux is disabled on that box ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] Odd failure of smbd to start from init.d - CentOS 5.4 - it's that fine SELinux
On 05/27/2010 05:55 AM, Jerry Franz wrote: I have *twenty* virtual machines I deploy updates to before it ever touches my production systems. Not everything is testable on non-production machines. ... Now back to fixing the SELinux configuration on a machine I had to put in 'permissive' mode a few weeks ago because the last round of SELinux updates broke the web server's ability to open its own log files. That sounds like the sort of thing that you'd have noticed if you'd applied the update and started the service on a test host before production. ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] sandbox complaint
On 27.5.2010 18.49, m.r...@5-cent.us wrote: Duplicate declaration in module: type/attribute zos_remote_t Have you seen this (though it is a couple of years old): https://bugzilla.redhat.com/show_bug.cgi?id=467026 - Jussi -- Jussi Hirvi * Green Spot Topeliuksenkatu 15 C * 00250 Helsinki * Finland Tel. +358 9 493 981 * Mobile +358 40 771 2098 (only sms) jussi.hi...@greenspot.fi * http://www.greenspot.fi ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
[CentOS] CentOS-announce Digest, Vol 63, Issue 4
Send CentOS-announce mailing list submissions to
centos-annou...@centos.org
To subscribe or unsubscribe via the World Wide Web, visit
http://lists.centos.org/mailman/listinfo/centos-announce
or, via email, send a message with subject or body 'help' to
centos-announce-requ...@centos.org
You can reach the person managing the list at
centos-announce-ow...@centos.org
When replying, please edit your Subject line so it is more specific
than Re: Contents of CentOS-announce digest...
Today's Topics:
1. CEBA-2010-0410 CentOS 5 i386 vsftpd Update (Karanbir Singh)
2. CEBA-2010-0410 CentOS 5 x86_64 vsftpd Update (Karanbir Singh)
--
Message: 1
Date: Wed, 26 May 2010 12:31:25 +
From: Karanbir Singh kbsi...@centos.org
Subject: [CentOS-announce] CEBA-2010-0410 CentOS 5 i386 vsftpd Update
To: centos-annou...@centos.org
Message-ID: 20100526123125.ga28...@chakra.karan.org
Content-Type: text/plain; charset=us-ascii
CentOS Errata and Bugfix Advisory 2010-0410
Upstream details at : https://rhn.redhat.com/errata/RHBA-2010-0410.html
The following updated files have been uploaded and are currently
syncing to the mirrors: ( md5sum Filename )
i386:
acc3dbc8de0744fc10887b5b97994f89 vsftpd-2.0.5-16.el5_5.1.i386.rpm
Source:
b18ba6cb5952d4cd648c2bbb0b8c8b30 vsftpd-2.0.5-16.el5_5.1.src.rpm
--
Karanbir Singh
CentOS Project { http://www.centos.org/ }
irc: z00dax, #cen...@irc.freenode.net
--
Message: 2
Date: Wed, 26 May 2010 12:31:25 +
From: Karanbir Singh kbsi...@centos.org
Subject: [CentOS-announce] CEBA-2010-0410 CentOS 5 x86_64 vsftpd
Update
To: centos-annou...@centos.org
Message-ID: 20100526123125.ga28...@chakra.karan.org
Content-Type: text/plain; charset=us-ascii
CentOS Errata and Bugfix Advisory 2010-0410
Upstream details at : https://rhn.redhat.com/errata/RHBA-2010-0410.html
The following updated files have been uploaded and are currently
syncing to the mirrors: ( md5sum Filename )
x86_64:
d970499effd032897c90099750df1bac vsftpd-2.0.5-16.el5_5.1.x86_64.rpm
Source:
b18ba6cb5952d4cd648c2bbb0b8c8b30 vsftpd-2.0.5-16.el5_5.1.src.rpm
--
Karanbir Singh
CentOS Project { http://www.centos.org/ }
irc: z00dax, #cen...@irc.freenode.net
--
___
CentOS-announce mailing list
centos-annou...@centos.org
http://lists.centos.org/mailman/listinfo/centos-announce
End of CentOS-announce Digest, Vol 63, Issue 4
**
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] sandbox complaint
Daniel wrote: On 05/27/2010 11:49 AM, m.r...@5-cent.us wrote: Updating a system from CentOS 5.4 (current) to 5.5, and I see: libsepol.scope_copy_callback: zosremote: Duplicate declaration in module: type/attribute zos_remote_t libsemanage.semanage_link_sandbox: Link packages failed semodule: Failed! Any ideas as to what's going on, or why? mark glad selinux is disabled on that box Do you have multiple pp files definitin zosremote? Well, after I googled zosremote, and found it's zos-remote, and where its config file was, in /etc/audisp I see: -rw-r- 1 root root 210 Mar 31 02:26 audispd.conf -rw-r- 1 root root 620 Mar 31 02:26 audisp-remote.conf drwxr-x--- 2 root root 4096 May 27 11:42 plugins.d -rw-r- 1 root root 246 Mar 31 02:26 zos-remote.conf And I *guarantee* I have *never* done anything other than just upgrade this system, and that this system has had selinux disabled all along, so if there are, they were installed with a yum update from whatever the upstream has packaged. mark ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
[CentOS] Firefox slower on GMail since update to CentOS 5.5
Hello, since I upgraded from CentOS x86_64 5.4 to 5.5, I noticed that Firefox has become significantly slower on GMail (or Google Apps Mail). The page becomes slow to scroll as soon as there are more than a few mails in a conversation (like in a typical CentOS mailing list thread). Did anyone else notice that as well? (I guess that I'm not the only GMail user around) Could I have missed something / do something wrong? More details: - I did a fresh install from the 5.5 install DVD, keeping only the home directories - I'm using the Nvidia driver from elrepo (but I had the pb also with the default driver) Cheers, Mathieu ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] Firefox slower on GMail since update to CentOS 5.5
On Thu, May 27, 2010 at 9:14 AM, Mathieu Baudier mbaud...@argeo.org wrote: Hello, since I upgraded from CentOS x86_64 5.4 to 5.5, I noticed that Firefox has become significantly slower on GMail (or Google Apps Mail). The page becomes slow to scroll as soon as there are more than a few mails in a conversation (like in a typical CentOS mailing list thread). Did anyone else notice that as well? (I guess that I'm not the only GMail user around) Could I have missed something / do something wrong? I had somewhat similar problems. This is a shot in the dark, but do you happen to have a Nvidia controller in your system? If so, you may have been affected by this bug: http://bugs.centos.org/view.php?id=4335 There is a workaround which solved the problem for me. Akemi ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] Odd failure of smbd to start from init.d - CentOS 5.4 - it's that fine SELinux
On 05/27/2010 08:51 AM, Gordon Messmer wrote: On 05/27/2010 05:55 AM, Jerry Franz wrote: I have *twenty* virtual machines I deploy updates to before it ever touches my production systems. Not everything is testable on non-production machines. ... Now back to fixing the SELinux configuration on a machine I had to put in 'permissive' mode a few weeks ago because the last round of SELinux updates broke the web server's ability to open its own log files. That sounds like the sort of thing that you'd have noticed if you'd applied the update and started the service on a test host before production. I have finite resources. If I had junior admins who could spend weeks doing testing of every update before deployment, twice as many physical machines as I now have so I could deploy dozens of VMs _just for testing updates_ (and let's not even begin to discuss the non-virtualizable machines such as the backups storage servers) , an extra co-location rack to put those additional servers in, and the budget to fix any emergent SELinux breakage, then, yeah, that would work. At a net cost several times higher than my current budget. Or I can turn off SELinux on most of my systems and not get my systems gratuitously broken every few to several months by SELinux policy updates. For my current budget. Hmmm What to do... What to do -- Benjamin Franz ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] question on CPU
I am now running stock centos 5.5 x86_64. jerry Sorry 2.6.18-194.3.1.el5 #1 SMP Thu May 13 13:08:30 EDT 2010 x86_64 x86_64 x86_64 GNU/Linux Jerry ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] Firefox slower on GMail since update to CentOS 5.5
I had somewhat similar problems. This is a shot in the dark, but do you happen to have a Nvidia controller in your system? If so, you may have been affected by this bug: http://bugs.centos.org/view.php?id=4335 There is a workaround which solved the problem for me. Thanks for the hint! I tried the workaround but unfortunately I still have the problem... ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] Having trouble with LDAP Authentication.
Message: 11 Date: Tue, 25 May 2010 16:16:45 -0500 From: Andy Akins a...@egovtn.org Subject: [CentOS] Having trouble with LDAP Authentication... To: CentOS mailing list centos@centos.org Message-ID: c821a86d.754b%a...@egovtn.org Content-Type: text/plain; charset=iso-8859-1 I?ve google and searched, and have had very little luck... I have: 1. Installed all the packages. 2. Configured and have running OpenLDAP. 3. Migrated my passwd/shadow/group/hosts files into the directory 4. Tested the directory using ldapsearch 5. Installed LAM (web interface to LDAP authentication) 6. Added a user using LAM. 7. Confirmed user is in directory. 8. Confirmed user is not in /etc/passwd 9. Confirmed using ?getent passwd | grep username? that the user is listed. 10. Confirmed using ?getent passwd? shows two records for each user except ldap-only users (one for /etc/passwd, one for LDAP). However, ?id username? Returns unknown user snip Assuming you have set up both server and client, I would try the following: 1) Don't use nscd until you can confirm basic auth to the Ldap server is working. 2) Enable logging on the Ldap server. Afair, CentOS defaults to loglevel 0, which is no logs. Try something like loglevel 256. 3) Try to authenticate from a client while tailing the server logs. That should give you an idea of whether the client is even reaching the server, and if so what sort of error is occurring. Btw you didn't mention if you were doing Ldap over tls, but that adds another point of failure. See here for a step-by-step test procedure for ssl/tls: http://aput.net/~jheiss/krbldap/howto.html Cheers, -- Steve Glasser sgla9...@gmail.com ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] question on CPU
What's the status of ACPI? Is it enabled in the bios? Is the acpi service installed and running? I see nothing in the bios for ACPI which is odd. in /proc/acpi/processor there is a CPU0 and CPU1 the info file shows process id: 0 and 1 in each file. So it looks like its there but /proc/cpuinfo still only shows 1 entry. Just not sure the OS is really using two cores. It seems like its not. jerry ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
[CentOS] vinyl sign letter cutter
I am looking for a recommendation for a vinyl sign letter cutter that is supporrted under Linux, specifically Centos. My knowledge of these machines is nil, but a bit of googling makes it appear that at least some of them can be made to work using Inkscape. Does anyone have any recommendations? -- MELVILLE THEATRE ~ Melville Sask ~ http://www.melvilletheatre.com ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
[CentOS] newer (2.7) Postfix RPM packages for RH
Postfix 2.3.3 that comes with RH/CentOS is very old, there are lots of new features in newer versions that appear to be very useful (revised queue manager with better scheduler as far back as v2.5, etc.). Latest stable version is 2.7. I was looking for RPM packages and I've found this site: http://ftp.wl0.org/official/ Anybody using it? Good things, bad things?... Anybody using Postfix 2.7 on CentOS by the way? Do you have any observations? -- Florin Andrei http://florin.myip.org/ ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] Firefox slower on GMail since update to CentOS 5.5
-Original Message- From: centos-boun...@centos.org [mailto:centos-boun...@centos.org] On Behalf Of Mathieu Baudier Sent: Thursday, May 27, 2010 1:33 PM To: CentOS mailing list Subject: Re: [CentOS] Firefox slower on GMail since update to CentOS 5.5 I had somewhat similar problems. This is a shot in the dark, but do you happen to have a Nvidia controller in your system? If so, you may have been affected by this bug: http://bugs.centos.org/view.php?id=4335 There is a workaround which solved the problem for me. Thanks for the hint! I tried the workaround but unfortunately I still have the problem... I cured my nvidia driver problems (which re-arose every kernel update or re-compile) by putting in an ATI video card. Problems since then = 0 nvidia is not fond of the Linux world (compared to ATI). *** This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the system manager. This footnote also confirms that this email message has been swept for the presence of computer viruses. www.Hubbell.com - Hubbell Incorporated** ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] newer (2.7) Postfix RPM packages for RH
Running postfix 2.7.0 on about 7 machines with CentOS 5.5 from source works just fine. Extremely happy with it serving up all sorts of mail. Running it with dovecot 1.2.11 and having a blast. --Rohan On Thu, May 27, 2010 at 10:57 AM, Florin Andrei flo...@andrei.myip.org wrote: Postfix 2.3.3 that comes with RH/CentOS is very old, there are lots of new features in newer versions that appear to be very useful (revised queue manager with better scheduler as far back as v2.5, etc.). Latest stable version is 2.7. I was looking for RPM packages and I've found this site: http://ftp.wl0.org/official/ Anybody using it? Good things, bad things?... Anybody using Postfix 2.7 on CentOS by the way? Do you have any observations? -- Florin Andrei http://florin.myip.org/ ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] Firefox slower on GMail since update to CentOS 5.5
On 5/27/2010 1:00 PM, Brunner, Brian T. wrote: I had somewhat similar problems. This is a shot in the dark, but do you happen to have a Nvidia controller in your system? If so, you may have been affected by this bug: http://bugs.centos.org/view.php?id=4335 There is a workaround which solved the problem for me. Thanks for the hint! I tried the workaround but unfortunately I still have the problem... I cured my nvidia driver problems (which re-arose every kernel update or re-compile) by putting in an ATI video card. Problems since then = 0 nvidia is not fond of the Linux world (compared to ATI). A more realistic way to say that is that linux is intentionally incompatible with a lot of other software. -- Les Mikesell lesmikes...@gmail.com ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] sandbox complaint
Daniel wrote: On 05/27/2010 12:19 PM, m.r...@5-cent.us wrote: Daniel wrote: On 05/27/2010 12:00 PM, m.r...@5-cent.us wrote: Daniel wrote: On 05/27/2010 11:49 AM, m.r...@5-cent.us wrote: Updating a system from CentOS 5.4 (current) to 5.5, and I see: libsepol.scope_copy_callback: zosremote: Duplicate declaration in module: type/attribute zos_remote_t libsemanage.semanage_link_sandbox: Link packages failed semodule: Failed! snip Do you have multiple pp files definitin zosremote? snip locate -r zos.*remote Might find the bad pp file. snip I don't believe they want me to remove it. Doing the locate, I find: locate -r zos.*remote | grep .pp /etc/selinux/mls/modules/active/modules/zosremote.pp /etc/selinux/mls/modules/previous/modules/zosremote.pp /etc/selinux/targeted/modules/active/modules/zos_remote.pp /etc/selinux/targeted/modules/previous/modules/zos_remote.pp /old/etc/selinux/targeted/modules/active/modules/zos_remote.pp /old/etc/selinux/targeted/modules/previous/modules/zos_remote.pp /old/usr/share/selinux/mls/audispd-zos-remote.pp /old/usr/share/selinux/strict/audispd-zos-remote.pp /old/usr/share/selinux/targeted/audispd-zos-remote.pp /usr/share/selinux/mls/zosremote.pp /usr/share/selinux/targeted/zosremote.pp So, which should I get rid of, that was not cleaned up during the update? Remove all audispd-zos-remote.pp and zos_remote.pp We ship zosremote.pp Ok... I can do that, but are you saying to just rm it, and not whatever package it came in? And if it's not correct, why is it here, anyway? Anyone on the CentOS list? I don't want to screw around with this as oh, it's only his weird problem, I figure that it's happening to a lot of other folks, and I'd like to make the problem go away for everyone. That, of course, means it the incorrect stuff needs to be removed from whatever package it's in mark ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] Firefox slower on GMail since update to CentOS 5.5
Les wrote: On 5/27/2010 1:00 PM, Brunner, Brian T. wrote: I had somewhat similar problems. This is a shot in the dark, but do you happen to have a Nvidia controller in your system? If so, you may have been affected by this bug: http://bugs.centos.org/view.php?id=4335 There is a workaround which solved the problem for me. Thanks for the hint! I tried the workaround but unfortunately I still have the problem... I cured my nvidia driver problems (which re-arose every kernel update or re-compile) by putting in an ATI video card. Problems since then = 0 nvidia is not fond of the Linux world (compared to ATI). A more realistic way to say that is that linux is intentionally incompatible with a lot of other software. Ah, no, it's not. Brian had it right: nvidia does keep a lot proprietary, and does *not* pay a lot of attention to writing their own drivers for Linux. mark ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] Firefox slower on GMail since update to CentOS 5.5
On 5/27/2010 1:39 PM, m.r...@5-cent.us wrote: Les wrote: On 5/27/2010 1:00 PM, Brunner, Brian T. wrote: I had somewhat similar problems. This is a shot in the dark, but do you happen to have a Nvidia controller in your system? If so, you may have been affected by this bug: http://bugs.centos.org/view.php?id=4335 There is a workaround which solved the problem for me. Thanks for the hint! I tried the workaround but unfortunately I still have the problem... I cured my nvidia driver problems (which re-arose every kernel update or re-compile) by putting in an ATI video card. Problems since then = 0 nvidia is not fond of the Linux world (compared to ATI). A more realistic way to say that is that linux is intentionally incompatible with a lot of other software. Ah, no, it's not. Brian had it right: nvidia does keep a lot proprietary, and does *not* pay a lot of attention to writing their own drivers for Linux. Exactly - and it is linux that intentionally makes it difficult to impossible to use such software even if others would like to give it to you on their own terms. Just put the blame in the right place. -- Les Mikesell lesmikes...@gmail.com ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] Firefox slower on GMail since update to CentOS 5.5
nvidia is not fond of the Linux world (compared to ATI). A more realistic way to say that is that linux is intentionally incompatible with a lot of other software. AIUI, nvidia gives (to the linux world) less information about how to exploit nvidia capabilities than does ATI, and that the linux world is not ignoring information proffered by nvidia. How then is it that linux is intentionally incompatible with nvidia and other software? Or do you refer to driver versioning? (a number of things are screwy with the linux world; nvidia dysfunctionality is not on the list intentionally) /AIUI btw congrats to the OP for solving the problem! *** This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the system manager. This footnote also confirms that this email message has been swept for the presence of computer viruses. www.Hubbell.com - Hubbell Incorporated** ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] Firefox slower on GMail since update to CentOS 5.5
On 5/27/2010 1:39 PM, m.r...@5-cent.us wrote: Les wrote: On 5/27/2010 1:00 PM, Brunner, Brian T. wrote: snip Thanks for the hint! I tried the workaround but unfortunately I still have the problem... I cured my nvidia driver problems (which re-arose every kernel update or re-compile) by putting in an ATI video card. Problems since then = 0 nvidia is not fond of the Linux world (compared to ATI). A more realistic way to say that is that linux is intentionally incompatible with a lot of other software. Ah, no, it's not. Brian had it right: nvidia does keep a lot proprietary, and does *not* pay a lot of attention to writing their own drivers for Linux. Exactly - and it is linux that intentionally makes it difficult to impossible to use such software even if others would like to give it to you on their own terms. Just put the blame in the right place. Sorry, I don't understand what you wrote. How does Linux make it difficult to impossible? It's an o/s, with POSIX calls, just like all the other unices. It's not M$, and it's not Apple... so is being neither making it hard? mark ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] Firefox slower on GMail since update to CentOS 5.5
On 5/27/2010 1:49 PM, m.r...@5-cent.us wrote: Ah, no, it's not. Brian had it right: nvidia does keep a lot proprietary, and does *not* pay a lot of attention to writing their own drivers for Linux. Exactly - and it is linux that intentionally makes it difficult to impossible to use such software even if others would like to give it to you on their own terms. Just put the blame in the right place. Sorry, I don't understand what you wrote. How does Linux make it difficult to impossible? It's an o/s, with POSIX calls, just like all the other unices. It's not M$, and it's not Apple... so is being neither making it hard? For one thing, the license terms do not permit including software with differing terms (hence no zfs, etc. even though source is freely available), and for another the interfaces keep changing so binaries can't be expected to work after updates. -- Les Mikesell lesmikes...@gmail.com ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] Firefox slower on GMail since update to CentOS 5.5
On 5/27/2010 1:49 PM, m.r...@5-cent.us wrote: Ah, no, it's not. Brian had it right: nvidia does keep a lot proprietary, and does *not* pay a lot of attention to writing their own drivers for Linux. Exactly - and it is linux that intentionally makes it difficult to impossible to use such software even if others would like to give it to you on their own terms. Just put the blame in the right place. Sorry, I don't understand what you wrote. How does Linux make it difficult to impossible? It's an o/s, with POSIX calls, just like all the other unices. It's not M$, and it's not Apple... so is being neither making it hard? For one thing, the license terms do not permit including software with differing terms (hence no zfs, etc. even though source is freely Huh? Are you saying all distros? There are plenty of repositories with directories named nonfree. It's Linux, you can choose the repositories you pull from. CentOS is slightly different, since it's what RedHat chooses, but you can always add to it. available), and for another the interfaces keep changing so binaries can't be expected to work after updates. They do? Then why can I run a current version (other than worrying about twinview) of any Linux video driver on a video card that's years old. The only thing I see changing that way are the hardware manufacturers. mark ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] Firefox slower on GMail since update to CentOS 5.5
On Thu, May 27, 2010 at 12:00 PM, Les Mikesell lesmikes...@gmail.com wrote: On 5/27/2010 1:49 PM, m.r...@5-cent.us wrote: Sorry, I don't understand what you wrote. How does Linux make it difficult to impossible? It's an o/s, with POSIX calls, just like all the other unices. It's not M$, and it's not Apple... so is being neither making it hard? For one thing, the license terms do not permit including software with differing terms (hence no zfs, etc. even though source is freely available), and for another the interfaces keep changing so binaries can't be expected to work after updates. I'm not sure if I have the problem or not (don't think so), but I have to take issue with this last bit (changing interfaces). I'm running the nvidia driver dkms-nvidia-x11-drv-185.18.14-1.nodist.rf.x86_64 from Oct 22, 2009, and IIRC it has survived the 5.4 and 5.5 updates without any problems at all. Perhaps that's because dkms rebuilds the driver for each new kernel, but even so, the interfaces can't have changed too much if they still build and work. When I was working on the Linux kernel directly, one of the least likely areas of change was the driver interface, precisely because changes at this level are detrimental to all new driver development and old driver compatibility. The driver API is fairly well established and less likely to change than most other fly-by-night (i.e., M$) OSs. Even the proprietary versions of UNIX don't mess with this (much). They may be different, but they aren't too variable. Thus, I find this claim difficult to believe. Do you have examples? Proof? Cheers. mhr ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] Firefox slower on GMail since update to CentOS 5.5
On 5/27/2010 2:06 PM, m.r...@5-cent.us wrote: Sorry, I don't understand what you wrote. How does Linux make it difficult to impossible? It's an o/s, with POSIX calls, just like all the other unices. It's not M$, and it's not Apple... so is being neither making it hard? For one thing, the license terms do not permit including software with differing terms (hence no zfs, etc. even though source is freely Huh? Are you saying all distros? There are plenty of repositories with directories named nonfree. It's Linux, you can choose the repositories you pull from. CentOS is slightly different, since it's what RedHat chooses, but you can always add to it. Those are for things that are separate programs, not something that becomes part of the kernel (or any other thing with a gpl'd component). Drivers are sort of a gray area. There's an argument that they use the kernel interfaces and another that they become part of the kernel. available), and for another the interfaces keep changing so binaries can't be expected to work after updates. They do? Then why can I run a current version (other than worrying about twinview) of any Linux video driver on a video card that's years old. The only thing I see changing that way are the hardware manufacturers. The drivers included as part of the kernel are recompiled to match each version. If the owner of the driver code doesn't want to release the source under the GPL or can't because some sub-component is under 3rd party control or different existing license, the binary may or may not work. -- Les Mikesell lesmikes...@gmail.com ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] Samba3x daily logged errors with Win7 clients
On Tue, May 25, 2010 at 14:08, Steve Snyder swsny...@snydernet.net wrote: In the course of upgrading from CentOS 5.4 to CentOS 5.5 I changed from using the samba (v3.0.x) packages to the samba3x (v3.3.8) packages, mostly because the newer version was said to better support Win7. The Samba server services Linux, WinXP, and Win7 clients. Where you can found samba 3.3.8 for CentOS 5.5 ? On my 5.5 box I see only samba 3.3.2 there. Thanks ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] sandbox complaint
Daniel wrote: On 05/27/2010 02:38 PM, m.r...@5-cent.us wrote: Daniel wrote: On 05/27/2010 12:19 PM, m.r...@5-cent.us wrote: Daniel wrote: On 05/27/2010 12:00 PM, m.r...@5-cent.us wrote: Daniel wrote: On 05/27/2010 11:49 AM, m.r...@5-cent.us wrote: Updating a system from CentOS 5.4 (current) to 5.5, and I see: libsepol.scope_copy_callback: zosremote: Duplicate declaration in module: type/attribute zos_remote_t libsemanage.semanage_link_sandbox: Link packages failed semodule: Failed! snip Do you have multiple pp files definitin zosremote? snip locate -r zos.*remote Might find the bad pp file. snip I don't believe they want me to remove it. Doing the locate, I find: locate -r zos.*remote | grep .pp /etc/selinux/mls/modules/active/modules/zosremote.pp /etc/selinux/mls/modules/previous/modules/zosremote.pp /etc/selinux/targeted/modules/active/modules/zos_remote.pp /etc/selinux/targeted/modules/previous/modules/zos_remote.pp /old/etc/selinux/targeted/modules/active/modules/zos_remote.pp /old/etc/selinux/targeted/modules/previous/modules/zos_remote.pp /old/usr/share/selinux/mls/audispd-zos-remote.pp /old/usr/share/selinux/strict/audispd-zos-remote.pp /old/usr/share/selinux/targeted/audispd-zos-remote.pp /usr/share/selinux/mls/zosremote.pp /usr/share/selinux/targeted/zosremote.pp So, which should I get rid of, that was not cleaned up during the update? Remove all audispd-zos-remote.pp and zos_remote.pp We ship zosremote.pp Ok... I can do that, but are you saying to just rm it, and not whatever package it came in? And if it's not correct, why is it here, anyway? Anyone on the CentOS list? I don't want to screw around with this as oh, it's only his weird problem, I figure that it's happening to a lot of other folks, and I'd like to make the problem go away for everyone. That, of course, means it the incorrect stuff needs to be removed from whatever package it's in I think you will find that it does not happen for everyone else and that these files do not belong to other packages. I have a feeling that something went wrong on an update that left these files around. Hmmm...but I don't know if rm'ing them will work, if they're in the d/b. So I suppose I'll have to find the package that put them there... time passes Ok, anyone on the CentOS list: does *anyone* know where this came from? It' sin the directory provided by selinux-policy-targeted-2.4.6-279.el5.noarch, but there's no zos_remote in the package. mark ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] Firefox slower on GMail since update to CentOS 5.5
On 5/27/2010 2:47 PM, MHR wrote: On Thu, May 27, 2010 at 12:00 PM, Les Mikeselllesmikes...@gmail.com wrote: On 5/27/2010 1:49 PM, m.r...@5-cent.us wrote: Sorry, I don't understand what you wrote. How does Linux make it difficult to impossible? It's an o/s, with POSIX calls, just like all the other unices. It's not M$, and it's not Apple... so is being neither making it hard? For one thing, the license terms do not permit including software with differing terms (hence no zfs, etc. even though source is freely available), and for another the interfaces keep changing so binaries can't be expected to work after updates. I'm not sure if I have the problem or not (don't think so), but I have to take issue with this last bit (changing interfaces). I'm running the nvidia driver dkms-nvidia-x11-drv-185.18.14-1.nodist.rf.x86_64 from Oct 22, 2009, and IIRC it has survived the 5.4 and 5.5 updates without any problems at all. Perhaps that's because dkms rebuilds the driver for each new kernel, but even so, the interfaces can't have changed too much if they still build and work. When I was working on the Linux kernel directly, one of the least likely areas of change was the driver interface, precisely because changes at this level are detrimental to all new driver development and old driver compatibility. The driver API is fairly well established and less likely to change than most other fly-by-night (i.e., M$) OSs. No, dkms was a late add-in to help fix this problem. It wouldn't be necessary if the OS itself provided a stable interface. The 'enterprise' versions of Linux also are an attempt to minimize the problem by freezing the kernel version for many years and only backporting minimal changes. Even the proprietary versions of UNIX don't mess with this (much). They may be different, but they aren't too variable. Thus, I find this claim difficult to believe. Do you have examples? Proof? The nvidia driver is the obvious one. They've done the best they can, Dell added dkms, and people still have trouble. Most other vendors don't even bother. -- Les Mikesell lesmikes...@gmail.com ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] sandbox complaint
Daniel wrote: On 05/27/2010 04:12 PM, m.r...@5-cent.us wrote: Daniel wrote: On 05/27/2010 02:38 PM, m.r...@5-cent.us wrote: Daniel wrote: On 05/27/2010 12:19 PM, m.r...@5-cent.us wrote: Daniel wrote: On 05/27/2010 12:00 PM, m.r...@5-cent.us wrote: Daniel wrote: On 05/27/2010 11:49 AM, m.r...@5-cent.us wrote: Updating a system from CentOS 5.4 (current) to 5.5, and I see: libsepol.scope_copy_callback: zosremote: Duplicate declaration in module: type/attribute zos_remote_t libsemanage.semanage_link_sandbox: Link packages failed semodule: Failed! snip Remove all audispd-zos-remote.pp and zos_remote.pp We ship zosremote.pp Ok... I can do that, but are you saying to just rm it, and not whatever package it came in? snip I think you will find that it does not happen for everyone else and that these files do not belong to other packages. I have a feeling that something went wrong on an update that left these files around. Hmmm...but I don't know if rm'ing them will work, if they're in the d/b. So I suppose I'll have to find the package that put them there... time passes Ok, anyone on the CentOS list: does *anyone* know where this came from? It' sin the directory provided by selinux-policy-targeted-2.4.6-279.el5.noarch, but there's no zos_remote in the package. Trust me on this, I know what I am talking about. Just remove them. They were put there by previous versions of audit and maybe selinux-policy. If you are concerned you can squirrel them away. selinux-policy takes all pp files in the active directory and compiles them into a policy module. Ok, I believe you. I also found the same .pp in .../previous/, and diff said no difference, so no problem rm'ing them. mark ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] Samba3x daily logged errors with Win7 clients
On 05/27/2010 04:09 PM, Vnpenguin wrote: On Tue, May 25, 2010 at 14:08, Steve Snyderswsny...@snydernet.net wrote: In the course of upgrading from CentOS 5.4 to CentOS 5.5 I changed from using the samba (v3.0.x) packages to the samba3x (v3.3.8) packages, mostly because the newer version was said to better support Win7. The Samba server services Linux, WinXP, and Win7 clients. Where you can found samba 3.3.8 for CentOS 5.5 ? On my 5.5 box I see only samba 3.3.2 there. yum remove samba-* yum install samba3x-* $ rpm -qa | grep samba | sort samba3x-3.3.8-0.51.el5 samba3x-client-3.3.8-0.51.el5 samba3x-common-3.3.8-0.51.el5 samba3x-doc-3.3.8-0.51.el5 samba3x-domainjoin-gui-3.3.8-0.51.el5 samba3x-swat-3.3.8-0.51.el5 samba3x-winbind-3.3.8-0.51.el5 samba3x-winbind-devel-3.3.8-0.51.el5 ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
[CentOS] sendmail and relaying
I think my sendmail is not correctly set. It says the default is to disallow relaying. I am running centos 4.8 and I think sendmail is relaying for anything. Based on this: http://www.sendmail.org/~ca/email/chk-89f.html#RELAYING I added|: FEATURE(relay_hosts_only) to my sendmail.mc file and restarted sendmail. I am still seeing connects that get relayed and are not in my /etc/mail/access file. Is there something else I am missing? Thanks, |Jerry ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] sendmail and relaying
On Thu, 27 May 2010, Jerry Geis wrote: I think my sendmail is not correctly set. It says the default is to disallow relaying. I am running centos 4.8 and I think sendmail is relaying for anything. Based on this: http://www.sendmail.org/~ca/email/chk-89f.html#RELAYING I added|: FEATURE(relay_hosts_only) to my sendmail.mc file and restarted sendmail. I am still seeing connects that get relayed and are not in my /etc/mail/access file. I assume that means you got a rebuilt sendmail.cf before restarting sendmail, but you'll want to make sure. I also assume that you've defined the access_db feature in your sendmail.mc file. That said, I don't include the relay_hosts_only FEATURE at all. I just add the IP addresses of the hosts that can relay into the access file, e.g., 1.2.3.4 RELAY Works for me. -- Paul Heinlein heinl...@madboa.com http://www.madboa.com/ ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] sendmail and relaying
On 5/27/2010 4:16 PM, Jerry Geis wrote: I think my sendmail is not correctly set. It says the default is to disallow relaying. I am running centos 4.8 and I think sendmail is relaying for anything. Based on this: http://www.sendmail.org/~ca/email/chk-89f.html#RELAYING I added|: FEATURE(relay_hosts_only) to my sendmail.mc file and restarted sendmail. I am still seeing connects that get relayed and are not in my /etc/mail/access file. Is there something else I am missing? How much have you changed from the stock sendmail.mc? The default should (a) only accept connections from localhost (127.0.0.1), and (b) even when you remove that restriction should only accept messages where the server is the final destination unless it is from a source explicitly permitted in the access file. -- Les Mikesell lesmikes...@gmail.com ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] Calendar server software suggestions
I was planning to evaluate devical, but have not tried it yet: href=http://www.davical.org/; target=_blank http://www.davical.org/ I would welcome comments from anyone with experience with devical. DAViCal is excellent. Perhaps more at home on a Debian based disty, but can be installed with 'alien' on CentOS. I think I had to fiddle with some file permissions on CentOS. It works well, although my brother (who I set it up for) never managed to figure out the calendar permissions. HTH ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
[CentOS] Replacement tape drive configuration
CentOS 4.8 Hi All: We recently had a Sony SDX-500V tape drive fail on one of our servers running CentOS 4.8. I have now replaced it with a spare SDX-500C. The problem that I am having now is that the failed drive had ceased responding to SCSI commands and we have since rebooted the system which resulted in the tape drive being removed from our current hardware configuration and the system does not recognize the new tape drive. I know that I can just reboot the system and kudzu will add the tape drive back in during the boot process however I was wondering if it would be possible to manually run kudzu to add the drive or am I just borrowing trouble by trying to do this? TIA Regards, Hugh -- Hugh E Cruickshank, Forward Software, www.forward-software.com ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] Replacement tape drive configuration
On Thu, May 27, 2010 at 6:14 PM, Hugh E Cruickshank h...@forsoft.com wrote: CentOS 4.8 Hi All: We recently had a Sony SDX-500V tape drive fail on one of our servers running CentOS 4.8. I have now replaced it with a spare SDX-500C. The problem that I am having now is that the failed drive had ceased responding to SCSI commands and we have since rebooted the system which resulted in the tape drive being removed from our current hardware configuration and the system does not recognize the new tape drive. I know that I can just reboot the system and kudzu will add the tape drive back in during the boot process however I was wondering if it would be possible to manually run kudzu to add the drive or am I just borrowing trouble by trying to do this? TIA Regards, Hugh You could try to rescan the SCSI bus: http://jeff.blogs.ocjtech.us/2008/05/how-to-re-scan-scsi-bus-on-linux.html More info: http://kbase.redhat.com/faq/docs/DOC-3942 ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] Replacement tape drive configuration
From: Brian Mathis Sent: May 27, 2010 15:27 On Thu, May 27, 2010 at 6:14 PM, Hugh E Cruickshank h...@forsoft.com wrote: I know that I can just reboot the system and kudzu will add the tape drive back in during the boot process however I was wondering if it would be possible to manually run kudzu to add the drive or am I just borrowing trouble by trying to do this? You could try to rescan the SCSI bus: http://jeff.blogs.ocjtech.us/2008/05/how-to-re-scan-scsi-bus-on-linux.html More info: http://kbase.redhat.com/faq/docs/DOC-3942 Hi Brian: That did the trick. Thank you muchly. Regards, Hugh -- Hugh E Cruickshank, Forward Software, www.forward-software.com ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] Replacement tape drive configuration
On 5/27/2010 6:14 PM, Hugh E Cruickshank wrote: CentOS 4.8 Hi All: We recently had a Sony SDX-500V tape drive fail on one of our servers running CentOS 4.8. I have now replaced it with a spare SDX-500C. The problem that I am having now is that the failed drive had ceased responding to SCSI commands and we have since rebooted the system which resulted in the tape drive being removed from our current hardware configuration and the system does not recognize the new tape drive. I know that I can just reboot the system and kudzu will add the tape drive back in during the boot process however I was wondering if it would be possible to manually run kudzu to add the drive or am I just borrowing trouble by trying to do this? TIA Regards, Hugh When you say the 'system' no longer recognizes the tape drive, are you sure the SCSI controller even detects the tape drive during boot? From what I've seen, tape drives use the generic tape driver and get mapped to /dev/stX. Ryan Manikowski ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] Replacement tape drive configuration
From Ryan Manikowski Sent: May 27, 2010 18:42 When you say the 'system' no longer recognizes the tape drive, are you sure the SCSI controller even detects the tape drive during boot? From what I've seen, tape drives use the generic tape driver and get mapped to /dev/stX. I know that it will recognize it on a reboot however I did not want to wait until a reboot was convenient. I was looking for a way to add the drive without having to do a reboot. Brian's suggestion has worked and I am now using the tape drive without having to do a reboot. Regards, Hugh -- Hugh E Cruickshank, Forward Software, www.forward-software.com ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] Multipathing with Sun 7310
On Thu, 27 May 2010, Jens Neu wrote: Dear list, we have a relatively new Sun Storage 7310, where we connect CentOS 5.5 Servers (IBM LS21/LS41 Blades) via Brocade Switches, 4GBit FC. The Blades boot from SAN via qla2xxx, and have no harddisks at all. We want them to use multipathing from the very beginning, so /boot and / are already seen by multipathd. Problem is, that the Sun 7310 has two storage heads which run in active/passive mode. BUT the multipathd thinks, they are active/active and therefor shows half the available paths as faulty (multipath -ll below) While this probably gives me the redundancy that is desired, it is a relatively messy situation, since it will be unnecessary hard to detect real path failures and the OS is complaining about readsector0 checker reports path is down which gives me 40M/24h /var/log/messages garbage. Any hints for a reasonable configuration? Unfortunately the Sun 7310 is rather new, so almost nothing shows up on google... even less for RHEL/CentOS :-( regards from Berlin Jens [r...@dev-db1 tmp]# multipath -ll sdaa: checker msg is readsector0 checker reports path is down sdab: checker msg is readsector0 checker reports path is down sdac: checker msg is readsector0 checker reports path is down sdad: checker msg is readsector0 checker reports path is down sdd: checker msg is readsector0 checker reports path is down sdh: checker msg is readsector0 checker reports path is down sdl: checker msg is readsector0 checker reports path is down sdp: checker msg is readsector0 checker reports path is down sdq: checker msg is readsector0 checker reports path is down sdr: checker msg is readsector0 checker reports path is down sds: checker msg is readsector0 checker reports path is down sdt: checker msg is readsector0 checker reports path is down sdu: checker msg is readsector0 checker reports path is down sdv: checker msg is readsector0 checker reports path is down sdx: checker msg is readsector0 checker reports path is down sdz: checker msg is readsector0 checker reports path is down mpath0 (3600144f0fdf58b5c4bc738070001) dm-0 SUN,Sun Storage 7310 [size=50G][features=0][hwhandler=0][rw] \_ round-robin 0 [prio=1][active] \_ 0:0:1:0 sda 8:0 [active][ready] \_ round-robin 0 [prio=1][enabled] \_ 1:0:0:0 sde 8:64 [active][ready] \_ round-robin 0 [prio=1][enabled] \_ 0:0:2:0 sdi 8:128 [active][ready] \_ round-robin 0 [prio=1][enabled] \_ 1:0:1:0 sdm 8:192 [active][ready] \_ round-robin 0 [prio=0][enabled] \_ 0:0:3:0 sdq 65:0 [failed][faulty] \_ round-robin 0 [prio=0][enabled] \_ 1:0:2:0 sdr 65:16 [failed][faulty] \_ round-robin 0 [prio=0][enabled] \_ 0:0:4:0 sdx 65:112 [failed][faulty] \_ round-robin 0 [prio=0][enabled] \_ 1:0:3:0 sdz 65:144 [failed][faulty] There may be a vendor specific RDAC driver needed to properly interface with the 7310 unit or with the vendor HBA. Check and see as that driver may properly hide the hardware multiple paths, etc. -- James A. Peltier Systems Analyst (FASNet), VIVARIUM Technical Director HPC Coordinator Simon Fraser University - Burnaby Campus Phone : 778-782-6573 Fax : 778-782-3045 E-Mail : jpelt...@sfu.ca Website : http://www.fas.sfu.ca | http://vivarium.cs.sfu.ca http://blogs.sfu.ca/people/jpeltier MSN : subatomic_s...@hotmail.com TEAMWORK There's power in numbers. Learn to work together.___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] Calendar server software suggestions
On Fri, May 28, 2010 at 6:09 AM, Ian Murray murra...@yahoo.co.uk wrote: I was planning to evaluate devical, but have not tried it yet: href=http://www.davical.org/; target=_blank http://www.davical.org/ I would welcome comments from anyone with experience with devical. DAViCal is excellent. Perhaps more at home on a Debian based disty, but can be installed with 'alien' on CentOS. I think I had to fiddle with some file permissions on CentOS. It works well, although my brother (who I set it up for) never managed to figure out the calendar permissions. Yeah ~ That tool is very excellent , by the way , I searched another tool called Bedework via the Google . This tool maybe is very useful. Because you can use it to connect the LDAP Server for authenticating the users . Bedework is an open-source enterprise calendar system that supports public, personal, and group calendaring. It is designed to conform to current calendaring standards with a goal of attaining strong interoperability between other calendaring systems and clients. Bedework is built with an emphasis on higher education, though it is used by many commercial enterprises. So if the tool can be authenticated the users using the LDAP Server , it maybe very convenient to the enterprise . isn't it ? HTH ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
