[CentOS] Filelocking and rquotad
Hi, Can someone give me some pointer or links to understand how Filelocking and rquotad works on NFS ? I searched a lot on google , didn't get any good articles on that. -- Regards Basil ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] Best supported motherboard
I always prefer Intel products. Does anyone got any experience on any of these boards ? On 1 November 2010 23:05, Robert Heller hel...@deepsoft.com wrote: At Mon, 1 Nov 2010 11:51:49 -0500 CentOS mailing list centos@centos.org wrote: ---Executing: recode Well it depends on what you want in your new board, workstation vs serverI just built 2 machines based on this boardMSI 785G-E53 AM3 785G...with amd quad coresone is acting as a server and centos 5.5 loaded up just fine with no issues, running KVM with a couple of VM'sI would look at the 1055T or 1090T CPU which have 6 cores and would probably give you better performance if you want to run 4 or 5 vm's.the one thing that I did was use a pata DVD burner...since I have heard of issues with the sata versions and centosI prefer amd to Intel since I'm always on a very limited budget...;) I have a SATA DVD burner: Optiarc Model: DVD RW AD-7241S and it works just fine under CentOS 5.5 on a AMD Sempron(tm) Processor LE-1300 system (ASRock K10N78 motherboard). I did have to add the 'irqpoll' kernel parameter to get the SATA ports to work. On Mon, Nov 1, 2010 at 11:24 AM, Basil Kurian basilkur...@gmail.com wrote: Which among these three motherboard is the best supported in Linux (Centos/Ubuntu) ? Intel® Desktop Board DH55HC [ http://ark.intel.com/Product.aspx?id=42409 ] Intel® Desktop Board DP55WG [ http://ark.intel.com/Product.aspx?id=40078 ] Intel® Desktop Board DP55KG [ http://www.intel.com/products/desktop/motherboards/DP55KG/DP55KG-overview.htm ] Also which will be a good processor , for using in a desktop PC to run 4 or 5 Virtual machines concurrently on VirtualBox or VMWare ESX server ? Intel® Xeon® Processor X3460 [ http://ark.intel.com/Product.aspx?id=42931] or Intel® CoreTM i7-870S [ http://ark.intel.com/Product.aspx?id=48498 ] -- Regards Basil Kurian http://basil.co.nr RSA Public key : gpg --keyserver pgp.mit.edu --recv-keys 41005549 ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos MIME-Version: 1.0 ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos -- Robert Heller -- 978-544-6933 / hel...@deepsoft.com Deepwoods Software-- http://www.deepsoft.com/ () ascii ribbon campaign -- against html e-mail /\ www.asciiribbon.org -- against proprietary attachments ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos -- Regards Basil Kurian http://basil.co.nr RSA Public key : gpg --keyserver pgp.mit.edu --recv-keys 41005549 ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
[CentOS] Best supported motherboard
Which among these three motherboard is the best supported in Linux (Centos/Ubuntu) ? Intel® Desktop Board DH55HC [ http://ark.intel.com/Product.aspx?id=42409 ] Intel® Desktop Board DP55WG [ http://ark.intel.com/Product.aspx?id=40078 ] Intel® Desktop Board DP55KG [ http://www.intel.com/products/desktop/motherboards/DP55KG/DP55KG-overview.htm] Also which will be a good processor , for using in a desktop PC to run 4 or 5 Virtual machines concurrently on VirtualBox or VMWare ESX server ? Intel® Xeon® Processor X3460 [ http://ark.intel.com/Product.aspx?id=42931 ] or Intel® Core™ i7-870S [ http://ark.intel.com/Product.aspx?id=48498 ] -- Regards Basil Kurian http://basil.co.nr RSA Public key : gpg --keyserver pgp.mit.edu --recv-keys 41005549 ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
[CentOS] Samba PDC + BDC using LDAP
I am trying to implement Samba Domain Controller with replication using LDAP . My intention is to create two Samba DC servers with LDAP backend , then to set one as master and other as slave , then replicate LDAP database in master to slave I shutdown second samba server and only first samba DC was running . Then I added one XP client to first samba server , I can successfully logged in to the domain Then I shutdown first server and started second server (every settings in first and second server is same . Also the ID is set to same value using * setlocalid* command ) but the xp can't login to the domain .. please help me to figure out the problem I documented every thing in a wiki ... please go through the steps . http://wiki.basil-kurian.co.cc/index.php/SMB_DC_WITH_REPLICATION ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] Samba PDC + BDC using LDAP
thanks , let me check the log files of samba ! On 30 July 2010 19:46, Craig White craigwh...@azapple.com wrote: On Fri, 2010-07-30 at 16:11 +0530, Basil Kurian wrote: I am trying to implement Samba Domain Controller with replication using LDAP . My intention is to create two Samba DC servers with LDAP backend , then to set one as master and other as slave , then replicate LDAP database in master to slave I shutdown second samba server and only first samba DC was running . Then I added one XP client to first samba server , I can successfully logged in to the domain Then I shutdown first server and started second server (every settings in first and second server is same . Also the ID is set to same value using setlocalid command ) but the xp can't login to the domain .. please help me to figure out the problem I documented every thing in a wiki ... please go through the steps . http://wiki.basil-kurian.co.cc/index.php/SMB_DC_WITH_REPLICATION didn't bother looking at the wiki but... Only the PDC should have a localsid and domainsid that are the same. The BDC should be joined to the domain and will have a different localsid. It would seem that your LDAP needs to support multi-master replication so 'writes' could happen at either the PDC or the BDC and LDAP will handle the sync'ing of the changes. You can look at the logs in the samba log directory for whichever machine is having a problem logging in to determine the reason for the login failure. Craig -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] DNS or firewall problem
echo 1 /proc/sys/net/ipv4/ip_forward On 6 July 2010 21:17, Basil Kurian basilkur...@gmail.com wrote: enable ipv4_forwarding in /etc/sysctl.conf # service iptables start # iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE eth0 is the interface connected to modem. On 6 July 2010 04:30, Thomas Dukes tdu...@sc.rr.com wrote: Been working this for over a month now and I'm stumped. Everything was working until the 'crash'. Backup was no good so I did a fresh install of centos 5.5. Trying to get things back like they were but its been a really long time since I had to set things up from scratch, Redhat 2.0. My centos server acts as a gateway/firewall/router for my home network. Internal machines can access the internet. The server can access the internet. I can access my server/services from outside the local network but internal machines cannot. Any ideas/suggestions? Thanks, --Eddie ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] DNS or firewall problem
enable ipv4_forwarding in /etc/sysctl.conf # service iptables start # iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE eth0 is the interface connected to modem. On 6 July 2010 04:30, Thomas Dukes tdu...@sc.rr.com wrote: Been working this for over a month now and I'm stumped. Everything was working until the 'crash'. Backup was no good so I did a fresh install of centos 5.5. Trying to get things back like they were but its been a really long time since I had to set things up from scratch, Redhat 2.0. My centos server acts as a gateway/firewall/router for my home network. Internal machines can access the internet. The server can access the internet. I can access my server/services from outside the local network but internal machines cannot. Any ideas/suggestions? Thanks, --Eddie ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
[CentOS] Problem with Gnome (or nautilus)
I have upgraded form 5.4 to 5.5 . after that i 'm having problem with nautilus some strange errors like not on the same file system occurs during file operation like moving deleting etc. after that i did a fresh installation of 5.5 . then aslo same problem .. does anyone experienced such a problem ?? Now i'm using 5.3 . Also the Bind DNS server in 5.4 and 5.5 seems to be buggy . I don't have any problem with BIND on 5.3 ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] Problem with Gnome (or nautilus)
which one ?? problem with Gnome or BIND ?? i tried RHEL 5.5 anr 5.4 . the two doesn't have any problem with gnome or BIND any patch released ?? On 6 July 2010 22:01, JohnS jse...@gmail.com wrote: On Tue, 2010-07-06 at 21:28 +0530, Basil Kurian wrote: I have upgraded form 5.4 to 5.5 . after that i 'm having problem with nautilus some strange errors like not on the same file system occurs during file operation like moving deleting etc. after that i did a fresh installation of 5.5 . then aslo same problem .. does anyone experienced such a problem ?? --- That's a Bug for 5.5 Upstream Confirms it. John ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] Problem with Gnome (or nautilus)
actually i tried downgrading nautilus by using packges from centos 5.3 dvd .. it again shows problem , then tried to downgrade gnome as such from 5.3 DVD , then some dependency problem arises finally i installed PcmanFM .. and used it for a while . what about BIND DNS server in 5.4 and 5.5 ?? in 5.3 it is working perfectly. On 6 July 2010 23:56, JohnS jse...@gmail.com wrote: On Tue, 2010-07-06 at 22:17 +0530, Basil Kurian wrote: which one ?? problem with Gnome or BIND ?? Nautilus is the Problem at hand.. The question I had answered. i tried RHEL 5.5 anr 5.4 . the two doesn't have any problem with gnome or BIND Maybe your not a heavy user to see it. You will hit when you start transferring huge files in the GUI any patch released ?? --- How about next time BOTTOM POST ! https://bugzilla.redhat.com/buglist.cgi?quicksearch=nautilus There are several of the entries there. John ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos