Re: [CentOS] CentOS 6.6 repo access issue.
On Tue, 2015-03-10 at 16:44 +0530, Ravi Roy wrote: Hi Guys, My apologies for earlier mail without subject line. kindly ignore. i've CentOS 6.6 (Final) 64 bit version installed and I can not access the online repositories to install/update (pls see eror below the error), I tried to google this error I get a lot of links but nothing I could really solving this issue. I've already disabled ipv6 and also defined proxy in /etc/yum.conf. ... This is stating the obvious but it looks like your proxy definition in yum.conf does not work. I assume you have something like: proxy=http://hostname:port with a possible proxy_username=whoever and proxy_password=whatever if required in yum.conf Check these again, I find I often read what I thought I typed, not what I actually did. If this is correct tcpdump may give you some useful information on what is actually happening. Regards ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] How to enable sound for other users but the one who owns the current session
On Thu, 2014-07-03 at 00:37 +0200, wwp wrote: Hello there! I'm trying to get sound from applications running from other users bug the one who owns the current GNOME sessions. Typically, my default user is A and he's running the GNOME session, logged in graphically. From this session, I open terminals, su to other users (B or C, non-root) and run mplayer or firefox. No sound for these. Adding those users to the audio group didn't help. Any idea how to do this? From very limited experience where I attempted it and got this to work with some semblance of reliability once long ago I can tell you that it involves something around: load-module module-native-protocol-tcp auth-ip-acl=127.0.0.1 This implies the pulse server must provide a local network service and the clients must be configured to connect to this server. Updating default.pa in .pulse directories and granting access to pulse* groups also rings a bell. Sadly I kept few notes on this so can only find this hint at present. There must be better ways to do it and if you get it working I would be keen to know how, so please provide feedback. I also recall murmurs of security issues around shared pulse services, obviously more so if the ip is not localhost, so consider that too. ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] Samba on Centos 5/6 differences
On Mon, 2014-03-10 at 11:45 -0400, Steve Campbell wrote: Kinda OT. I've been trying to get Samba running on a Centos 5 box for some time now, but can't seem to get it to happen. I can not connect to the machine from our external network but I can connect from a box on the same network. So it seems like a firewall problem. This is covering the basics, but did you perhaps limit the IP range allowed to connect to the samba service in /etc/samba/smb.conf in either the interfaces = or hosts allow = statements to exclude the external network? As far as I know these statements have not changed between CentOS 5 and 6. Sane defaults typically limit this so your shares are not potentially exposed to the wider internet. Alternatively, is your default route set up properly for the other network on both machines? If your samba is configured for access via tcp_wrappers /etc/hosts.allow and /etc/hosts.deny comes into play. This is again not standard configuration. If these suggestions don't solve it we may need extracts from your configuration files. Exclude comments and mask sensitive information before you post these. In the basic port open or not firewall configuration the server should not care where the connection comes from so I would look at the samba configuration first. ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] Frustrated. Java on Centos 6 doesn't give an error message when downloading from a Samsung Galaxy S3
On Fri, 2013-05-24 at 14:33 +, Rock wrote: ... c) Connecting that phone by AirDroid (works! Even for multiple files!) Slow. Cumbersome. But all that matters is that files can be transferred from the Samsung Galaxy SIII to the Centos 6 PC. I use ES File Explorer on my S3 for manual single or multiple file transfers to CentOS desktops over wireless. The ftp targets in ES File Explorer supports sftp, which works well and is enabled on default CentOS installs. ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] Help: Server security compromised?
On Wed, 2008-08-06 at 15:14 +0800, Noob Centos Admin wrote: .. snip I did that too, no root login and everytime I have to su from normal user. It is a pain to work with especially with having to use full pathnames for commands instead of say just doing a service httpd restart. If you use su only, you assume root privileges without the root environment. Rather do su - which gives you the full root environment, including path. The same holds for other users, i..e su - joe switches the user to the user joe with full environment. ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] madwifi on Centos 5.2, kernel 2.6.18-92.1.6.el5
Any of these approaches will work. There is a bug in madwifi (or at least a difference in opinion on RH kernels) as per http://madwifi.org/ticket/1956 As documented there this requires a trivial source code change in order to get the modules to compile. If your system already attempts to compile the module at boot time you only need to make the change in the code found under /usr/src and all should be well. If not, compile it from madwifi source or an atrpms source rpm as per your preference. Regards Hendrik On Sun, 2008-07-13 at 23:46 -0400, Kurt Hansen wrote: Hello, I just installed Centos 5.2 on my wife's IBM thinkpad T41 with Atheros wireless. It looks like I need to install madwifi to get the wireless to work. Our home wireless network uses WPA2 I found the EL5 rpms at atrpms, but there is no madwifi-kmdl rpms for kernel 2.6.18-92.1.6.el5. So, to get the wireless working on my home network, what's the shortest path from here? Install madwifi from source (was part the way there but discovered the rpms when I looked for the wpa_supplicant stuff)? Or, can I use one of the other madwifi-kmdl rpms? Or, go back to an earlier kernel? Thanks for your help! Take care, Kurt Hansen ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] Problems to install java plugin in CentOS 5.1 x86_64
On Fri, 2008-02-01 at 00:46 -0200, Sergio Belkin wrote: --- El Vie 01 Feb 2008, Hendrik Strydom encontró un teclado y tipeó lo siguiente: HS: On Thu, 2008-01-31 at 23:51 -0200, Sergio Belkin wrote: HS: --- El Mié 30 Ene 2008, Ralph Angenendt encontró un teclado y tipeó lo HS: siguiente: HS: RA: Sergio Belkin wrote: HS: RA: Hi! HS: RA: HS: RA: I've tried to install java plugin as is in HS: RA: http://www.howtoforge.com/installation-guide-centos5.1-desktop-p7 but HS: with no RA: success. HS: RA: HS: RA: All steps seems to go well, with no error messages, but Firefox says HS: that RA: there is no java plugin. HS: RA: HS: RA: Are you using a 64bit version of CentOS? Then it won't work - Sun's HS: java RA: plugin only works on 32bit browsers. HS: HS: I'm using Centos 64bit, but I have firefox 32bit installed HS: HS: Are you sure you only have the 32 bit version installed? HS: yelp lists the 64 bit version as a dependency, and the /usr/bin/firefox HS: script checks for the existence of and runs the 64 bit version if it HS: exists. HS: HS: Does HS: rpm -q firefox HS: only return line with firefox? No Hendrik, I have installed both, but is that a problem? This depends how you start firefox. The /usr/bin/firefox script will always start the 64 bit version if it is installed. If contains a check that sets MOZ_LIB_DIR to use the 64 bit version: MOZ_LIB_DIR=/usr/lib if [ -x /usr/lib64/firefox-1.5.0.12/firefox-bin ] then MOZ_LIB_DIR=/usr/lib64 fi You may need to intervene here to use the 32 bit version. A simple check when firefox is running is to do: $ ps -ef | grep firefox this will return lines containing either: /usr/lib64/firefox-1.5.0.12/firefox-bin which is the 64 bit version, or /usr/lib/firefox-1.5.0.12/firefox-bin which is the 32 bit version. If you edit /usr/bin/firefox directly to prevent it from using the 64 bit version it will work for all users, but you need to redo it with every firefox update. If you copy this to for example /usr/bin/firefox32 you need to manually create a shortcut to start firefox for all affected users. (If you update the original menu entry it may well be replaced with an update - I have not tested this.) I tend to update a shortcut on the panel, which is more convenient to use. Regards Hendrik ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] Running a local mirror of centos?
On Sat, 2007-11-17 at 17:46 -0500, Jason Pyeron wrote: Now that we have 28 centos boxes up and running, we really want to minimize the up2date traffic. Is there a how to on mirroring centos? We are using rsync -azHv --delete-excluded --delete rsync://mirrors.kernel.org/centos/ --exclude-from=centos.excludes --bwlimit=64 --progress centos/ But then what? Publish this mirror on a internal website, for example link it to: /var/www/html/repo/Centos (which means it will be visible on http://reposerver/repo/Centos , where reposerver resolves to the local web server. Then modify the file /etc/yum.repos.d/Centos-Base, comment out the mirrorlist entry and add one like: #mirrorlist=http://mirrorlist.centos.org/?release=$releaseverarch= $basearchrepo=os baseurl=http://reposerver/repo/CentOS/$releasever/os/$basearch/ (for base) Do this for every repository that you mirror. Place this updated file in /etc/yum.repos.d/ on all your CentOS servers and the server will update from it for yum. Regards Hendrik -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- - - - Jason Pyeron PD Inc. http://www.pdinc.us - - Sr. Consultant10 West 24th Street #100- - +1 (443) 269-1555 x333Baltimore, Maryland 21218 - - - -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- This message is for the designated recipient only and may contain privileged, proprietary, or otherwise private information. If you have received it in error, purge the message from your system and notify the sender immediately. Any other use of the email by you is prohibited. ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
