Re: [CentOS] Adding kmod to pxe install
> > >From: CentOS on behalf of Phil Perry > >Sent: Monday, December 2, 2019 10:58 AM >To: centos@centos.org >Subject: Re: [CentOS] Adding kmod to pxe install > >On 02/12/2019 16:08, Valeri Galtsev wrote: >> >> >> On 2019-12-02 10:00, Fabian Arrotin wrote: >>> On 02/12/2019 12:42, Alexandre Leonenko wrote: >>>> Hey guys, >>>> >>>> I'm stumped in how to add the kmod rpm to pxe install. I need it to >>>> be installed but also loaded during the install as well. >>>> The rpm in question is the 3w-9xxx from elrepo >>>> https://centos.pkgs.org/8/elrepo-x86_64/kmod-3w-9xxx-2.26.02.014-1.el8_0.elrepo.x86_64.rpm.html >>>> >>>> >>>> I'm constantly getting the following message >>>> Warning: can't find installer main image path in .treeinfo >>>> >>>> Any help or pointing in right direction would be appreciated. >>>> >>>> Regards, >>>> Alex >>> >>> If you need it at install time, you need a dud (Driver Disk), so see >>> http://mirrors.coreix.net/elrepo/dud/el8/x86_64/ and use inst.dd= >>> >> >> Thank you, Fabian! I too may need it in close future. >> >> Valeri >> > >Hopefully it's obvious, but make sure you pick the driver update disk >image that matches the kernel/point release you are installing (e.g, >el8_0 or el8_1 etc). > >___ >CentOS mailing list >CentOS@centos.org >https://lists.centos.org/mailman/listinfo/centos <https://lists.centos.org/mailman/listinfo/centos> Thanks a lot guys. ___ CentOS mailing list CentOS@centos.org https://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] Adding kmod to pxe install
On 02/12/2019 16:08, Valeri Galtsev wrote: On 2019-12-02 10:00, Fabian Arrotin wrote: On 02/12/2019 12:42, Alexandre Leonenko wrote: Hey guys, I'm stumped in how to add the kmod rpm to pxe install. I need it to be installed but also loaded during the install as well. The rpm in question is the 3w-9xxx from elrepo https://centos.pkgs.org/8/elrepo-x86_64/kmod-3w-9xxx-2.26.02.014-1.el8_0.elrepo.x86_64.rpm.html I'm constantly getting the following message Warning: can't find installer main image path in .treeinfo Any help or pointing in right direction would be appreciated. Regards, Alex If you need it at install time, you need a dud (Driver Disk), so see http://mirrors.coreix.net/elrepo/dud/el8/x86_64/ and use inst.dd= Thank you, Fabian! I too may need it in close future. Valeri Hopefully it's obvious, but make sure you pick the driver update disk image that matches the kernel/point release you are installing (e.g, el8_0 or el8_1 etc). ___ CentOS mailing list CentOS@centos.org https://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] Adding kmod to pxe install
On 2019-12-02 10:00, Fabian Arrotin wrote: On 02/12/2019 12:42, Alexandre Leonenko wrote: Hey guys, I'm stumped in how to add the kmod rpm to pxe install. I need it to be installed but also loaded during the install as well. The rpm in question is the 3w-9xxx from elrepo https://centos.pkgs.org/8/elrepo-x86_64/kmod-3w-9xxx-2.26.02.014-1.el8_0.elrepo.x86_64.rpm.html I'm constantly getting the following message Warning: can't find installer main image path in .treeinfo Any help or pointing in right direction would be appreciated. Regards, Alex If you need it at install time, you need a dud (Driver Disk), so see http://mirrors.coreix.net/elrepo/dud/el8/x86_64/ and use inst.dd= Thank you, Fabian! I too may need it in close future. Valeri ___ CentOS mailing list CentOS@centos.org https://lists.centos.org/mailman/listinfo/centos -- Valeri Galtsev Sr System Administrator Department of Astronomy and Astrophysics Kavli Institute for Cosmological Physics University of Chicago Phone: 773-702-4247 ___ CentOS mailing list CentOS@centos.org https://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] Adding kmod to pxe install
On 02/12/2019 12:42, Alexandre Leonenko wrote: > Hey guys, > > I'm stumped in how to add the kmod rpm to pxe install. I need it to be > installed but also loaded during the install as well. > The rpm in question is the 3w-9xxx from elrepo > https://centos.pkgs.org/8/elrepo-x86_64/kmod-3w-9xxx-2.26.02.014-1.el8_0.elrepo.x86_64.rpm.html > > I'm constantly getting the following message > Warning: can't find installer main image path in .treeinfo > > Any help or pointing in right direction would be appreciated. > > Regards, > Alex If you need it at install time, you need a dud (Driver Disk), so see http://mirrors.coreix.net/elrepo/dud/el8/x86_64/ and use inst.dd= -- Fabian Arrotin The CentOS Project | https://www.centos.org gpg key: 17F3B7A1 | twitter: @arrfab signature.asc Description: OpenPGP digital signature ___ CentOS mailing list CentOS@centos.org https://lists.centos.org/mailman/listinfo/centos
[CentOS] Adding kmod to pxe install
Hey guys, I'm stumped in how to add the kmod rpm to pxe install. I need it to be installed but also loaded during the install as well. The rpm in question is the 3w-9xxx from elrepo https://centos.pkgs.org/8/elrepo-x86_64/kmod-3w-9xxx-2.26.02.014-1.el8_0.elrepo.x86_64.rpm.html I'm constantly getting the following message Warning: can't find installer main image path in .treeinfo Any help or pointing in right direction would be appreciated. Regards, Alex ___ CentOS mailing list CentOS@centos.org https://lists.centos.org/mailman/listinfo/centos