Re: [CentOS] Loading drivers during "linux rescue"
From: Jobst Schmalenbach > At least once I need to boot the rescue disk to select the > bootpartition and install grub on the new drives, I need to insmod > the drivers, but I do not know where and how to do that during > the boot process of the rescue disk (there is no menu for that). Look at the dd option in the documentation: https://access.redhat.com/knowledge/docs/en-US/Red_Hat_Enterprise_Linux/6/html/Installation_Guide/ap-rescuemode.html#s1-rescuemode-boot JD ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] Loading drivers during "linux rescue"
Hi Jobst,
I believe you'll need to build a new initrd image and include the driver
modules. Try http://wiki.centos.org/TipsAndTricks/CreateNewInitrd for a
start. There are other guides out there too.
Good luck!
Stu
On 23 August 2012 13:08, Jobst Schmalenbach wrote:
> Sorry, maybe I did not give enough information.
> I have the drivers from adaptecs site (plus the kmod stuff).
>
> At least once I need to boot the rescue disk to select the
> bootpartition and install grub on the new drives, I need to insmod
> the drivers, but I do not know where and how to do that during
> the boot process of the rescue disk (there is no menu for that).
>
> I have never had to do this before ... in all the years of using Linux ;-)
>
>
> Jobst
>
>
>
>
> On Thu, Aug 23, 2012 at 02:31:55AM -0700, John Doe (jd...@yahoo.com)
> wrote:
> > From: Jobst Schmalenbach
> >
> > > I got a new Adaptec 6405 card with a set of new harddrives.
> > > Problem that I assumed that the card had kernel drivers, which it has
> but only
> > > from 2.6.39 onwards.
> > >
> > > I installed the kmod-aacraid drivers, they see the card and drives,
> fine.
> > >
> > > However, I need to get a "linux rescue" to work, thus I need to load
> > > the drivers during the boot of the resuce disk.
> > > How do I do this?
> >
> > Tried adaptec's driver disk?
> >
> http://www.adaptec.com/en-us/speed/raid/aac/linux/aacraid_linux_driverdisks_v1_1_7-29100_tgz.htm
> >
> > JD
> > ___
> > CentOS mailing list
> > CentOS@centos.org
> > http://lists.centos.org/mailman/listinfo/centos
>
> --
> while ( !sorted ) { do_nothing ( ) ; }
>
> | |0| | Jobst Schmalenbach, jo...@barrett.com.au, General Manager
> | | |0| Barrett Consulting Group P/L & The Meditation Room P/L
> |0|0|0| +61 3 9532 7677, POBox 277, Caulfield South, 3162, Australia
> ___
> CentOS mailing list
> CentOS@centos.org
> http://lists.centos.org/mailman/listinfo/centos
>
--
Stu
"Did I do that deja-vu joke?"
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] Loading drivers during "linux rescue"
Sorry, maybe I did not give enough information.
I have the drivers from adaptecs site (plus the kmod stuff).
At least once I need to boot the rescue disk to select the
bootpartition and install grub on the new drives, I need to insmod
the drivers, but I do not know where and how to do that during
the boot process of the rescue disk (there is no menu for that).
I have never had to do this before ... in all the years of using Linux ;-)
Jobst
On Thu, Aug 23, 2012 at 02:31:55AM -0700, John Doe (jd...@yahoo.com) wrote:
> From: Jobst Schmalenbach
>
> > I got a new Adaptec 6405 card with a set of new harddrives.
> > Problem that I assumed that the card had kernel drivers, which it has but
> > only
> > from 2.6.39 onwards.
> >
> > I installed the kmod-aacraid drivers, they see the card and drives, fine.
> >
> > However, I need to get a "linux rescue" to work, thus I need to load
> > the drivers during the boot of the resuce disk.
> > How do I do this?
>
> Tried adaptec's driver disk?
> http://www.adaptec.com/en-us/speed/raid/aac/linux/aacraid_linux_driverdisks_v1_1_7-29100_tgz.htm
>
> JD
> ___
> CentOS mailing list
> CentOS@centos.org
> http://lists.centos.org/mailman/listinfo/centos
--
while ( !sorted ) { do_nothing ( ) ; }
| |0| | Jobst Schmalenbach, jo...@barrett.com.au, General Manager
| | |0| Barrett Consulting Group P/L & The Meditation Room P/L
|0|0|0| +61 3 9532 7677, POBox 277, Caulfield South, 3162, Australia
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] Loading drivers during "linux rescue"
From: Jobst Schmalenbach > I got a new Adaptec 6405 card with a set of new harddrives. > Problem that I assumed that the card had kernel drivers, which it has but > only > from 2.6.39 onwards. > > I installed the kmod-aacraid drivers, they see the card and drives, fine. > > However, I need to get a "linux rescue" to work, thus I need to load > the drivers during the boot of the resuce disk. > How do I do this? Tried adaptec's driver disk? http://www.adaptec.com/en-us/speed/raid/aac/linux/aacraid_linux_driverdisks_v1_1_7-29100_tgz.htm JD ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
[CentOS] Loading drivers during "linux rescue"
Hi I got a new Adaptec 6405 card with a set of new harddrives. Problem that I assumed that the card had kernel drivers, which it has but only from 2.6.39 onwards. I installed the kmod-aacraid drivers, they see the card and drives, fine. However, I need to get a "linux rescue" to work, thus I need to load the drivers during the boot of the resuce disk. How do I do this? thanks Jobst -- C is a write-only language. | |0| | Jobst Schmalenbach, jo...@barrett.com.au, General Manager | | |0| Barrett Consulting Group P/L & The Meditation Room P/L |0|0|0| +61 3 9532 7677, POBox 277, Caulfield South, 3162, Australia ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
