Re: [CentOS] mariadb fails to start under C7
Original Message > Date: Sunday, May 10, 2015 06:08:22 PM -0700 > From: Greg Lindahl > > On Sun, May 10, 2015 at 06:00:05PM -0700, John R Pierce wrote: > >> so far, other than having to learn a couple new commands, C7 >> really hasn't been a problem for us, everything we need to run >> works just fine. > > Once I decided to stop complaining about C7, it wasn't bad to learn > about the different stuff. Complaining about it is mostly a waste > of time. > > -- g I basically agree. I did switch from gnome to mate on my desk/laptop machines, which made me much happier, but otherwise C7 has been fine. - Richard ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] mariadb fails to start under C7
On Sun, May 10, 2015 at 06:00:05PM -0700, John R Pierce wrote: > so far, other than having to learn a couple new commands, C7 really > hasn't been a problem for us, everything we need to run works just > fine. Once I decided to stop complaining about C7, it wasn't bad to learn about the different stuff. Complaining about it is mostly a waste of time. -- g ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] mariadb fails to start under C7
On 5/10/2015 5:03 PM, Always Learning wrote: C7 appears to be a nightmare. So many problems. I do not remember as many problems with the introduction of C6. so far, other than having to learn a couple new commands, C7 really hasn't been a problem for us, everything we need to run works just fine. -- john r pierce, recycling bits in santa cruz ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] mariadb fails to start under C7
On Sun, 2015-05-10 at 17:42 -0500, Hal Wigoda wrote: > I'm old school. > If it works... . don't *** change it ? C7 appears to be a nightmare. So many problems. I do not remember as many problems with the introduction of C6. I like lasting stability. Same commands. Same reliability. No need to waste time learning new tricks when many of the existing old tricks remain undiscovered. Anyone might think RH is attempting to emulate Windoze. -- Regards, Paul. England, EU. No problems with C5 and with C6. ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] mariadb fails to start under C7
I'm old school. If it works... On Sun, May 10, 2015 at 2:17 PM, Tim Dunphy wrote: > Hi Earl, > > >I think I found your problem, you do not have the correct package > installed > > >[root@c7-db1 ~]# rpm -qa | grep maria > >mariadb-libs-5.5.41-2.el7_0.x86_64 > >mariadb-server-5.5.41-2.el7_0.x86_64 > >mariadb-5.5.41-2.el7_0.x86_64 > >[root@c7-db1 ~]# > > >Install the mariadb-x package and you should be able to start the service > > Thanks. While I could go with mariadb 5, the goal I had in mind was mariadb > 10. They're pretty different and 10 is more advanced. Push comes to shove, > however I could go with 5. > > And to Hal.. yeah you can use service mariadb start (assuming everything > you need is there). But systemctl is the preferred method under CentOS 7. > > [root@nfsdb1 ~]# service mariadb start > Redirecting to /bin/systemctl start mariadb.service > Failed to issue method call: Unit mariadb.service failed to load: No such > file or directory. > > I guess I'll wait to see if anyone has any ideas on getting MariaDB 10 > working. I've already googled this to no avail. If nothing turns up on the > list or if I can't find anything, I'll just go with MariaDB 5. > > Thanks, > Tim > > On Sun, May 10, 2015 at 3:11 PM, Earl A Ramirez > wrote: > > > Hello Tim, > > > > On 10 May 2015 at 14:47, Tim Dunphy wrote: > > > > > Hey all, > > > > > > I just unstalled MariaDB version 10 from the mariadb repositories > under > > a > > > CentOS 7 host. > > > > > > The install went fine! > > > > > > [root@nfsdb1 ~]# rpm -qa | grep -i mariadb > > > MariaDB-common-10.0.19-1.el7.centos.x86_64 > > > MariaDB-server-10.0.19-1.el7.centos.x86_64 > > > MariaDB-client-10.0.19-1.el7.centos.x86_64 > > > MariaDB-shared-10.0.19-1.el7.centos.x86_64 > > > > > > However, when I go to start up the service, I'm getting this error: > > > > > > [root@nfsdb1 ~]# systemctl start mariadb.service > > > Failed to issue method call: Unit mariadb.service failed to load: No > such > > > file or directory. > > > > > > Can someone please let me know how to start this up? > > > > > > Thanks, > > > Tim > > > > > > -- > > > GPG me!! > > > > > > gpg --keyserver pool.sks-keyservers.net --recv-keys F186197B > > > ___ > > > CentOS mailing list > > > CentOS@centos.org > > > http://lists.centos.org/mailman/listinfo/centos > > > > > > > > > I think I found your problem, you do not have the correct package > installed > > > > [root@c7-db1 ~]# rpm -qa | grep maria > > mariadb-libs-5.5.41-2.el7_0.x86_64 > > mariadb-server-5.5.41-2.el7_0.x86_64 > > mariadb-5.5.41-2.el7_0.x86_64 > > [root@c7-db1 ~]# > > > > Install the mariadb-x package and you should be able to start the service > > > > -- > > Kind Regards > > Earl Ramirez > > ___ > > CentOS mailing list > > CentOS@centos.org > > http://lists.centos.org/mailman/listinfo/centos > > > > > > -- > GPG me!! > > gpg --keyserver pool.sks-keyservers.net --recv-keys F186197B > ___ > CentOS mailing list > CentOS@centos.org > http://lists.centos.org/mailman/listinfo/centos > -- - Hal Wigoda Chicago ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] mariadb fails to start under C7
Actually, the systemctl command is: systemctl start mysql.service from the "systemctl show" output it looks like this actually calls the /etc/rc.d/init.d/mysql file for start/stop/reload, which seems backwards. It appears that mariadb is trying to be a total drop-in replacement to mysql, so all the paths/files, etc., e.g., in the ps output, are "mysql" not "mariadb" -- so it's tricky to have them both installed. By the way, you can use things like: systemctl list-units (and likely more efficient approaches) to find the systemctl command > naming. By gum! That seems to have done it!! Thank you very much for those tips! [root@nfsdb1 ~]# systemctl list-units | grep -i mysql mysql.service loaded active running LSB: start and stop MySQL [root@nfsdb1 ~]# systemctl start mysql.service [root@nfsdb1 ~]# lsof -i :3306 COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME mysqld 839 mysql 16u IPv6 15270 0t0 TCP *:mysql (LISTEN) And then I just ran mysql_secure_install and now I can log into the DB! Thanks so much for the help! The CentOS list rocks!! Tim On Sun, May 10, 2015 at 5:11 PM, Richard wrote: > > > Original Message > > Date: Sunday, May 10, 2015 01:20:34 PM -0700 > > From: John R Pierce > > > > On 5/10/2015 1:04 PM, Earl A Ramirez wrote: > >> Did a little Googling [0] and I saw that they recommend starting > >> it as follows: > >> > >> /etc/init.d/mysql start > > > > which is old school sysVinit style. > > > > my guess is, you'll need to fix up a systemd service description > > file, like /usr/lib/systemd/system/mariadb.service > > Actually, the systemctl command is: > >systemctl start mysql.service > > from the "systemctl show" output it looks like this actually calls > the /etc/rc.d/init.d/mysql file for start/stop/reload, which seems > backwards. > > It appears that mariadb is trying to be a total drop-in replacement > to mysql, so all the paths/files, etc., e.g., in the ps output, are > "mysql" not "mariadb" -- so it's tricky to have them both installed. > > By the way, you can use things like: > >systemctl list-units > > (and likely more efficient approaches) to find the systemctl command > naming. > > > ___ > CentOS mailing list > CentOS@centos.org > http://lists.centos.org/mailman/listinfo/centos > -- GPG me!! gpg --keyserver pool.sks-keyservers.net --recv-keys F186197B ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] mariadb fails to start under C7
Original Message > Date: Sunday, May 10, 2015 01:20:34 PM -0700 > From: John R Pierce > > On 5/10/2015 1:04 PM, Earl A Ramirez wrote: >> Did a little Googling [0] and I saw that they recommend starting >> it as follows: >> >> /etc/init.d/mysql start > > which is old school sysVinit style. > > my guess is, you'll need to fix up a systemd service description > file, like /usr/lib/systemd/system/mariadb.service Actually, the systemctl command is: systemctl start mysql.service from the "systemctl show" output it looks like this actually calls the /etc/rc.d/init.d/mysql file for start/stop/reload, which seems backwards. It appears that mariadb is trying to be a total drop-in replacement to mysql, so all the paths/files, etc., e.g., in the ps output, are "mysql" not "mariadb" -- so it's tricky to have them both installed. By the way, you can use things like: systemctl list-units (and likely more efficient approaches) to find the systemctl command naming. ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] mariadb fails to start under C7
On 5/10/2015 1:04 PM, Earl A Ramirez wrote: Did a little Googling [0] and I saw that they recommend starting it as follows: /etc/init.d/mysql start which is old school sysVinit style. my guess is, you'll need to fix up a systemd service description file, like /usr/lib/systemd/system/mariadb.service -- john r pierce, recycling bits in santa cruz ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] mariadb fails to start under C7
On 10 May 2015 at 15:17, Tim Dunphy wrote: > Hi Earl, > > >I think I found your problem, you do not have the correct package > installed > > >[root@c7-db1 ~]# rpm -qa | grep maria > >mariadb-libs-5.5.41-2.el7_0.x86_64 > >mariadb-server-5.5.41-2.el7_0.x86_64 > >mariadb-5.5.41-2.el7_0.x86_64 > >[root@c7-db1 ~]# > > >Install the mariadb-x package and you should be able to start the service > > Thanks. While I could go with mariadb 5, the goal I had in mind was mariadb > 10. They're pretty different and 10 is more advanced. Push comes to shove, > however I could go with 5. > > And to Hal.. yeah you can use service mariadb start (assuming everything > you need is there). But systemctl is the preferred method under CentOS 7. > > [root@nfsdb1 ~]# service mariadb start > Redirecting to /bin/systemctl start mariadb.service > Failed to issue method call: Unit mariadb.service failed to load: No such > file or directory. > > I guess I'll wait to see if anyone has any ideas on getting MariaDB 10 > working. I've already googled this to no avail. If nothing turns up on the > list or if I can't find anything, I'll just go with MariaDB 5. > > Thanks, > Tim > > Did a little Googling [0] and I saw that they recommend starting it as follows: /etc/init.d/mysql start [0] https://mariadb.com/blog/installing-mariadb-10-centos-7-rhel-7 -- Kind Regards Earl Ramirez ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] mariadb fails to start under C7
Hi Earl, >I think I found your problem, you do not have the correct package installed >[root@c7-db1 ~]# rpm -qa | grep maria >mariadb-libs-5.5.41-2.el7_0.x86_64 >mariadb-server-5.5.41-2.el7_0.x86_64 >mariadb-5.5.41-2.el7_0.x86_64 >[root@c7-db1 ~]# >Install the mariadb-x package and you should be able to start the service Thanks. While I could go with mariadb 5, the goal I had in mind was mariadb 10. They're pretty different and 10 is more advanced. Push comes to shove, however I could go with 5. And to Hal.. yeah you can use service mariadb start (assuming everything you need is there). But systemctl is the preferred method under CentOS 7. [root@nfsdb1 ~]# service mariadb start Redirecting to /bin/systemctl start mariadb.service Failed to issue method call: Unit mariadb.service failed to load: No such file or directory. I guess I'll wait to see if anyone has any ideas on getting MariaDB 10 working. I've already googled this to no avail. If nothing turns up on the list or if I can't find anything, I'll just go with MariaDB 5. Thanks, Tim On Sun, May 10, 2015 at 3:11 PM, Earl A Ramirez wrote: > Hello Tim, > > On 10 May 2015 at 14:47, Tim Dunphy wrote: > > > Hey all, > > > > I just unstalled MariaDB version 10 from the mariadb repositories under > a > > CentOS 7 host. > > > > The install went fine! > > > > [root@nfsdb1 ~]# rpm -qa | grep -i mariadb > > MariaDB-common-10.0.19-1.el7.centos.x86_64 > > MariaDB-server-10.0.19-1.el7.centos.x86_64 > > MariaDB-client-10.0.19-1.el7.centos.x86_64 > > MariaDB-shared-10.0.19-1.el7.centos.x86_64 > > > > However, when I go to start up the service, I'm getting this error: > > > > [root@nfsdb1 ~]# systemctl start mariadb.service > > Failed to issue method call: Unit mariadb.service failed to load: No such > > file or directory. > > > > Can someone please let me know how to start this up? > > > > Thanks, > > Tim > > > > -- > > GPG me!! > > > > gpg --keyserver pool.sks-keyservers.net --recv-keys F186197B > > ___ > > CentOS mailing list > > CentOS@centos.org > > http://lists.centos.org/mailman/listinfo/centos > > > > > I think I found your problem, you do not have the correct package installed > > [root@c7-db1 ~]# rpm -qa | grep maria > mariadb-libs-5.5.41-2.el7_0.x86_64 > mariadb-server-5.5.41-2.el7_0.x86_64 > mariadb-5.5.41-2.el7_0.x86_64 > [root@c7-db1 ~]# > > Install the mariadb-x package and you should be able to start the service > > -- > Kind Regards > Earl Ramirez > ___ > CentOS mailing list > CentOS@centos.org > http://lists.centos.org/mailman/listinfo/centos > -- GPG me!! gpg --keyserver pool.sks-keyservers.net --recv-keys F186197B ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] mariadb fails to start under C7
Hello Tim, On 10 May 2015 at 14:47, Tim Dunphy wrote: > Hey all, > > I just unstalled MariaDB version 10 from the mariadb repositories under a > CentOS 7 host. > > The install went fine! > > [root@nfsdb1 ~]# rpm -qa | grep -i mariadb > MariaDB-common-10.0.19-1.el7.centos.x86_64 > MariaDB-server-10.0.19-1.el7.centos.x86_64 > MariaDB-client-10.0.19-1.el7.centos.x86_64 > MariaDB-shared-10.0.19-1.el7.centos.x86_64 > > However, when I go to start up the service, I'm getting this error: > > [root@nfsdb1 ~]# systemctl start mariadb.service > Failed to issue method call: Unit mariadb.service failed to load: No such > file or directory. > > Can someone please let me know how to start this up? > > Thanks, > Tim > > -- > GPG me!! > > gpg --keyserver pool.sks-keyservers.net --recv-keys F186197B > ___ > CentOS mailing list > CentOS@centos.org > http://lists.centos.org/mailman/listinfo/centos > I think I found your problem, you do not have the correct package installed [root@c7-db1 ~]# rpm -qa | grep maria mariadb-libs-5.5.41-2.el7_0.x86_64 mariadb-server-5.5.41-2.el7_0.x86_64 mariadb-5.5.41-2.el7_0.x86_64 [root@c7-db1 ~]# Install the mariadb-x package and you should be able to start the service -- Kind Regards Earl Ramirez ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] mariadb fails to start under C7
Sorry - spellcheck. service mariadb start Sent from my iPad > On May 10, 2015, at 2:01 PM, Hal Wigoda wrote: > > It's service Marian start > > Sent from my iPad > >> On May 10, 2015, at 1:47 PM, Tim Dunphy wrote: >> >> Hey all, >> >> I just unstalled MariaDB version 10 from the mariadb repositories under a >> CentOS 7 host. >> >> The install went fine! >> >> [root@nfsdb1 ~]# rpm -qa | grep -i mariadb >> MariaDB-common-10.0.19-1.el7.centos.x86_64 >> MariaDB-server-10.0.19-1.el7.centos.x86_64 >> MariaDB-client-10.0.19-1.el7.centos.x86_64 >> MariaDB-shared-10.0.19-1.el7.centos.x86_64 >> >> However, when I go to start up the service, I'm getting this error: >> >> [root@nfsdb1 ~]# systemctl start mariadb.service >> Failed to issue method call: Unit mariadb.service failed to load: No such >> file or directory. >> >> Can someone please let me know how to start this up? >> >> Thanks, >> Tim >> >> -- >> GPG me!! >> >> gpg --keyserver pool.sks-keyservers.net --recv-keys F186197B >> ___ >> CentOS mailing list >> CentOS@centos.org >> http://lists.centos.org/mailman/listinfo/centos ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] mariadb fails to start under C7
On 10 May 2015 at 14:47, Tim Dunphy wrote: > Hey all, > > I just unstalled MariaDB version 10 from the mariadb repositories under a > CentOS 7 host. > > The install went fine! > > [root@nfsdb1 ~]# rpm -qa | grep -i mariadb > MariaDB-common-10.0.19-1.el7.centos.x86_64 > MariaDB-server-10.0.19-1.el7.centos.x86_64 > MariaDB-client-10.0.19-1.el7.centos.x86_64 > MariaDB-shared-10.0.19-1.el7.centos.x86_64 > > However, when I go to start up the service, I'm getting this error: > > [root@nfsdb1 ~]# systemctl start mariadb.service > Failed to issue method call: Unit mariadb.service failed to load: No such > file or directory. > > Can someone please let me know how to start this up? > > Thanks, > Tim > > -- > GPG me!! > > gpg --keyserver pool.sks-keyservers.net --recv-keys F186197B > ___ > CentOS mailing list > CentOS@centos.org > http://lists.centos.org/mailman/listinfo/centos > Hello Tim, Try systemctl start mariadb (without the .service) -- Kind Regards Earl Ramirez ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] mariadb fails to start under C7
It's service Marian start Sent from my iPad > On May 10, 2015, at 1:47 PM, Tim Dunphy wrote: > > Hey all, > > I just unstalled MariaDB version 10 from the mariadb repositories under a > CentOS 7 host. > > The install went fine! > > [root@nfsdb1 ~]# rpm -qa | grep -i mariadb > MariaDB-common-10.0.19-1.el7.centos.x86_64 > MariaDB-server-10.0.19-1.el7.centos.x86_64 > MariaDB-client-10.0.19-1.el7.centos.x86_64 > MariaDB-shared-10.0.19-1.el7.centos.x86_64 > > However, when I go to start up the service, I'm getting this error: > > [root@nfsdb1 ~]# systemctl start mariadb.service > Failed to issue method call: Unit mariadb.service failed to load: No such > file or directory. > > Can someone please let me know how to start this up? > > Thanks, > Tim > > -- > GPG me!! > > gpg --keyserver pool.sks-keyservers.net --recv-keys F186197B > ___ > CentOS mailing list > CentOS@centos.org > http://lists.centos.org/mailman/listinfo/centos ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
[CentOS] mariadb fails to start under C7
Hey all, I just unstalled MariaDB version 10 from the mariadb repositories under a CentOS 7 host. The install went fine! [root@nfsdb1 ~]# rpm -qa | grep -i mariadb MariaDB-common-10.0.19-1.el7.centos.x86_64 MariaDB-server-10.0.19-1.el7.centos.x86_64 MariaDB-client-10.0.19-1.el7.centos.x86_64 MariaDB-shared-10.0.19-1.el7.centos.x86_64 However, when I go to start up the service, I'm getting this error: [root@nfsdb1 ~]# systemctl start mariadb.service Failed to issue method call: Unit mariadb.service failed to load: No such file or directory. Can someone please let me know how to start this up? Thanks, Tim -- GPG me!! gpg --keyserver pool.sks-keyservers.net --recv-keys F186197B ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos