Re: [CentOS] True bond howto for Centos 6
On Tue, May 15, 2012 at 8:14 AM, Stephen Harris wrote: > On Tue, May 15, 2012 at 07:52:05AM -0700, Akemi Yagi wrote: >> http://bugs.centos.org/view.php?id=5726 >> >> I think it has to do with shutdown/reboots versus suspend/resume. > > FWIW, I hit this last week; had shut down the host to do a hardware > upgrade (eSATA controller, 12Tb of disks). After I brought the machine > back up it all looked good. Until the next morning when "logwatch" > reports from a guest complained that ntp had shut down 'cos the time > difference was too great. > > Oops! Yes, that confirms what the bug sumbitter described. Thanks for the note. Akemi ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] True bond howto for Centos 6
On Tue, May 15, 2012 at 1:27 PM, Florian La Roche wrote: > On Tue, May 15, 2012 at 07:52:05AM -0700, Akemi Yagi wrote: >> On Tue, May 15, 2012 at 7:41 AM, Florian La Roche >> wrote: >> >> > I also tend to favour shutdown/reboots for kvm guests instead of >> > suspend/resume... >> >> > Florian La Roche >> >> Slightly OT now, but, Florian, can you take a look at >> >> http://bugs.centos.org/view.php?id=5726 >> >> I think it has to do with shutdown/reboots versus suspend/resume. > > Hello Akemi, > > seems this is indeed dependent on suspend/resume versus save/restore and > I'd suggest reporting this upstream to see if this can become an option > versus hardcoded behaviour. Thanks, Florian, for your note and also for adding a comment to the bug tracker. Akemi ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] True bond howto for Centos 6
On Tue, May 15, 2012 at 07:52:05AM -0700, Akemi Yagi wrote: > On Tue, May 15, 2012 at 7:41 AM, Florian La Roche > wrote: > > > I also tend to favour shutdown/reboots for kvm guests instead of > > suspend/resume... > > > Florian La Roche > > Slightly OT now, but, Florian, can you take a look at > > http://bugs.centos.org/view.php?id=5726 > > I think it has to do with shutdown/reboots versus suspend/resume. Hello Akemi, seems this is indeed dependent on suspend/resume versus save/restore and I'd suggest reporting this upstream to see if this can become an option versus hardcoded behaviour. best regards, Florian La Roche ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] True bond howto for Centos 6
On Tue, May 15, 2012 at 07:52:05AM -0700, Akemi Yagi wrote: > http://bugs.centos.org/view.php?id=5726 > > I think it has to do with shutdown/reboots versus suspend/resume. FWIW, I hit this last week; had shut down the host to do a hardware upgrade (eSATA controller, 12Tb of disks). After I brought the machine back up it all looked good. Until the next morning when "logwatch" reports from a guest complained that ntp had shut down 'cos the time difference was too great. Oops! -- rgds Stephen ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] True bond howto for Centos 6
On Tue, May 15, 2012 at 7:41 AM, Florian La Roche wrote: > I also tend to favour shutdown/reboots for kvm guests instead of > suspend/resume... > Florian La Roche Slightly OT now, but, Florian, can you take a look at http://bugs.centos.org/view.php?id=5726 I think it has to do with shutdown/reboots versus suspend/resume. Akemi ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] True bond howto for Centos 6
On Sun, May 13, 2012 at 12:42:52PM -0700, Jerry Franz wrote: > On 05/13/2012 10:16 AM, bob wrote: > > > > from what i get it is a problem with libvirt, using a bridge that is > > going through a bondon the same machine. > > It must be rather detailed to fix and only a few people seem to use that > > route. (like you and me) > > > > I've been running 14 CentOS5 VMs with bridged over active-backup bonded > interfaces (actually, over three sets of bonded interfaces) on a single > Ubuntu 10.04-LTS server KVM host for a couple of years now. The only > real issue I have had is that during a host reboot the 'thundering herd' > trying to autostart simultaneously sometimes doesn't reliably start all > 14 VMs and I have to manually launch the one or two VMs that fail to > launch. I used to see the same for RHEL5-based kvm-servers, but haven't seen this with any RHEL6-based servers that I would recommend for kvm installs now. > Also, I had to roll my own shutdown script because for whatever reason > Ubuntu 10.04 thinks shooting running VMs in the head during a shutdown > is a better approach than waiting for them to properly shutdown on request. I also tend to favour shutdown/reboots for kvm guests instead of suspend/resume... best regards, Florian La Roche ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] True bond howto for Centos 6 TYPO correction
> SORRY typo; > >> options bond0 mode=5 miimon=100 > > is really > > options bond0 mode=4 miimon=100 > Confirm your switch supports LACP and those ports are configured on the switch for the aggregation. Check dmesg and the bonding status in /sys/class/net/$BOND/bonding to make sure that the lowest layer is good before progressing up the layers to IP/TCP/Application. ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] True bond howto for Centos 6
On May 13, 2012, at 2:43 PM, Digimer wrote: > On 05/13/2012 11:45 AM, aurfalien wrote: >> Hi all, >> >> Read many posts on the subject. >> >> Using 802.3ad. >> >> Few problems; >> Cannot ping some hosts on the network, they are all up. >> Cannot resolve via DNS which is one of the hosts that I cannot ping, >> internal nor external DNS hosts. >> Unplugging the NICS and plugging them back in will then not allow pining if >> the default d=gateway. >> >> When cold booting it somewhat works, some hosts are pingable while others >> are not. >> >> When restarting the network service via /etc/init.d/network, nothing is >> pingable. >> >> Here are my configs; >> >> ifcfg-bond0 >> DEVICE=bond0 >> USERCTL=no >> BOOTPROTO=none >> ONBOOT=yes >> IPADDR=10.0.0.10 >> NETMASK=255.255.0.0 >> NETWORK=10.0.0.0 >> TYPE=Unknown >> IPV6INIT=no >> >> ifcfg-eth0 >> DEVICE=eth0 >> BOOTPROTO=none >> ONBOOT=yes >> MASTER=bond0 >> SLAVE=yes >> USERCTL=no >> >> ifcfg-eth1 >> DEVICE=eth1 >> BOOTPROTO=none >> ONBOOT=yes >> MASTER=bond0 >> SLAVE=yes >> USERCTL=no >> >> /etc/modprob.d/bonding.conf >> alias bond0 bonding >> options bond0 mode=5 miimon=100 >> >> Bonding worked great in Centos 5.x, not so well for me in Centos 6.2. >> >> My goal is to get this working under bridging for KVM, I can only imagine >> the nightmare seeing I can't get a simple bond to work! >> >> Any guidance is golden. >> >> - aurf > > I run KVM VMs, built and managed using libvirt, through bonded > interfaces all the time. > > I don't have a specific tutorial for this, but I cover all the steps to > build a mode=1 (Active/Passive) bond and then routing VMs through it as > part of a larger tutorial. > > Here are the specific sections I think will help you; > > https://alteeve.com/w/2-Node_Red_Hat_KVM_Cluster_Tutorial#Network > > This section covers building 3 bonds, which you only need one of. In the > tutorial, you only need to care about the "IFN" bond and bridge (bond2 + > vbr2). > > https://alteeve.com/w/2-Node_Red_Hat_KVM_Cluster_Tutorial#Provisioning_vm0001-dev > > This covers all the steps used in the 'virt-install' call to provision > the VMs, which includes telling them to use the bridge. > > Hope that helps. WOW, thanks Digi! Will def read it. I've another server to test and roll out soon and want to revisit bond+bridge in Centos 6. This one unfortunately needs to be prime time tomorrow and I don't have enough resources (ie; brain power) to try the bond endeavor. - aurf ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] True bond howto for Centos 6
On 05/13/2012 10:16 AM, bob wrote: > > from what i get it is a problem with libvirt, using a bridge that is > going through a bondon the same machine. > It must be rather detailed to fix and only a few people seem to use that > route. (like you and me) > I've been running 14 CentOS5 VMs with bridged over active-backup bonded interfaces (actually, over three sets of bonded interfaces) on a single Ubuntu 10.04-LTS server KVM host for a couple of years now. The only real issue I have had is that during a host reboot the 'thundering herd' trying to autostart simultaneously sometimes doesn't reliably start all 14 VMs and I have to manually launch the one or two VMs that fail to launch. Also, I had to roll my own shutdown script because for whatever reason Ubuntu 10.04 thinks shooting running VMs in the head during a shutdown is a better approach than waiting for them to properly shutdown on request. -- Benjamin Franz ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] True bond howto for Centos 6
On May 13, 2012, at 2:27 PM, Mikael Fridh wrote: > On Sun, May 13, 2012 at 5:45 PM, aurfalien wrote: >> Hi all, >> >> Read many posts on the subject. >> >> Using 802.3ad. >> >> Few problems; >> Cannot ping some hosts on the network, they are all up. >> Cannot resolve via DNS which is one of the hosts that I cannot ping, >> internal nor external DNS hosts. >> Unplugging the NICS and plugging them back in will then not allow pining if >> the default d=gateway. >> >> When cold booting it somewhat works, some hosts are pingable while others >> are not. >> >> When restarting the network service via /etc/init.d/network, nothing is >> pingable. >> >> Here are my configs; >> >> ifcfg-bond0 >> DEVICE=bond0 >> USERCTL=no >> BOOTPROTO=none >> ONBOOT=yes >> IPADDR=10.0.0.10 >> NETMASK=255.255.0.0 >> NETWORK=10.0.0.0 >> TYPE=Unknown >> IPV6INIT=no > > Note I'm speaking bonding only and not bridging here: > > These days bonding is supposed to be done in the network-script files, > not modprobe.conf: > # ifcfg-bond0: > DEVICE=bond0 > IPADDR=10.0.0.6 > NETMASK=255.255.255.0 > #NETWORK= > #BROADCAST= > ONBOOT=yes > BOOTPROTO=none > USERCTL=no > BONDING_OPTS="mode=active-backup primary=em1 arp_interval=2000 > arp_ip_target=10.0.0.1 arp_validate=all num_grat_arp=12 > primary_reselect=failure" > > Adjust accordingly. Hi Mikael, I didn't do them in the .conf as its depreciated in Centos 6. However I did move the miimon etc... lines to my network scripts file and still no dice. I didn't try your suggestions as it looks too much like a patch, not very clean like it used to be in version 5. So I basically had done what you suggested but w/o the arp lines. I'm in no hurry for this although I will keep your suggestions in my notes as I may have an up coming Centos 6 server that absolutely needs binding. Thanks for the reply. - aurf ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] True bond howto for Centos 6
On 05/13/2012 11:45 AM, aurfalien wrote: > Hi all, > > Read many posts on the subject. > > Using 802.3ad. > > Few problems; > Cannot ping some hosts on the network, they are all up. > Cannot resolve via DNS which is one of the hosts that I cannot ping, internal > nor external DNS hosts. > Unplugging the NICS and plugging them back in will then not allow pining if > the default d=gateway. > > When cold booting it somewhat works, some hosts are pingable while others are > not. > > When restarting the network service via /etc/init.d/network, nothing is > pingable. > > Here are my configs; > > ifcfg-bond0 > DEVICE=bond0 > USERCTL=no > BOOTPROTO=none > ONBOOT=yes > IPADDR=10.0.0.10 > NETMASK=255.255.0.0 > NETWORK=10.0.0.0 > TYPE=Unknown > IPV6INIT=no > > ifcfg-eth0 > DEVICE=eth0 > BOOTPROTO=none > ONBOOT=yes > MASTER=bond0 > SLAVE=yes > USERCTL=no > > ifcfg-eth1 > DEVICE=eth1 > BOOTPROTO=none > ONBOOT=yes > MASTER=bond0 > SLAVE=yes > USERCTL=no > > /etc/modprob.d/bonding.conf > alias bond0 bonding > options bond0 mode=5 miimon=100 > > Bonding worked great in Centos 5.x, not so well for me in Centos 6.2. > > My goal is to get this working under bridging for KVM, I can only imagine the > nightmare seeing I can't get a simple bond to work! > > Any guidance is golden. > > - aurf I run KVM VMs, built and managed using libvirt, through bonded interfaces all the time. I don't have a specific tutorial for this, but I cover all the steps to build a mode=1 (Active/Passive) bond and then routing VMs through it as part of a larger tutorial. Here are the specific sections I think will help you; https://alteeve.com/w/2-Node_Red_Hat_KVM_Cluster_Tutorial#Network This section covers building 3 bonds, which you only need one of. In the tutorial, you only need to care about the "IFN" bond and bridge (bond2 + vbr2). https://alteeve.com/w/2-Node_Red_Hat_KVM_Cluster_Tutorial#Provisioning_vm0001-dev This covers all the steps used in the 'virt-install' call to provision the VMs, which includes telling them to use the bridge. Hope that helps. -- Digimer Papers and Projects: https://alteeve.com ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] True bond howto for Centos 6
On Sun, May 13, 2012 at 5:45 PM, aurfalien wrote: > Hi all, > > Read many posts on the subject. > > Using 802.3ad. > > Few problems; > Cannot ping some hosts on the network, they are all up. > Cannot resolve via DNS which is one of the hosts that I cannot ping, internal > nor external DNS hosts. > Unplugging the NICS and plugging them back in will then not allow pining if > the default d=gateway. > > When cold booting it somewhat works, some hosts are pingable while others are > not. > > When restarting the network service via /etc/init.d/network, nothing is > pingable. > > Here are my configs; > > ifcfg-bond0 > DEVICE=bond0 > USERCTL=no > BOOTPROTO=none > ONBOOT=yes > IPADDR=10.0.0.10 > NETMASK=255.255.0.0 > NETWORK=10.0.0.0 > TYPE=Unknown > IPV6INIT=no Note I'm speaking bonding only and not bridging here: These days bonding is supposed to be done in the network-script files, not modprobe.conf: # ifcfg-bond0: DEVICE=bond0 IPADDR=10.0.0.6 NETMASK=255.255.255.0 #NETWORK= #BROADCAST= ONBOOT=yes BOOTPROTO=none USERCTL=no BONDING_OPTS="mode=active-backup primary=em1 arp_interval=2000 arp_ip_target=10.0.0.1 arp_validate=all num_grat_arp=12 primary_reselect=failure" Adjust accordingly. -- Mikael. ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] True bond howto for Centos 6
On 5/13/2012 1:04 PM, aurfalien wrote: > Thats a real bummer. > > I don't get why they think this. > > I mean whats so strange for one to bond interfaces anyways on a system? Oh > well, multi bridges are fine for me. > > Funny, my Blow Leopard (OSX 10.6.8) and Cryin (OSX 10.7) Servers trunk fine > with my Foundry switch at 802.3ad. from what i get it is a problem with libvirt, using a bridge that is going through a bondon the same machine. It must be rather detailed to fix and only a few people seem to use that route. (like you and me) ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] True bond howto for Centos 6
On May 13, 2012, at 12:54 PM, bob wrote: > On 5/13/2012 12:30 PM, aurfalien wrote: >> On May 13, 2012, at 12:23 PM, bob wrote: >> >>> On 5/13/2012 11:45 AM, aurfalien wrote: Hi all, Read many posts on the subject. Using 802.3ad. Few problems; Cannot ping some hosts on the network, they are all up. Cannot resolve via DNS which is one of the hosts that I cannot ping, internal nor external DNS hosts. Unplugging the NICS and plugging them back in will then not allow pining if the default d=gateway. When cold booting it somewhat works, some hosts are pingable while others are not. When restarting the network service via /etc/init.d/network, nothing is pingable. Here are my configs; ifcfg-bond0 DEVICE=bond0 USERCTL=no BOOTPROTO=none ONBOOT=yes IPADDR=10.0.0.10 NETMASK=255.255.0.0 NETWORK=10.0.0.0 TYPE=Unknown IPV6INIT=no ifcfg-eth0 DEVICE=eth0 BOOTPROTO=none ONBOOT=yes MASTER=bond0 SLAVE=yes USERCTL=no ifcfg-eth1 DEVICE=eth1 BOOTPROTO=none ONBOOT=yes MASTER=bond0 SLAVE=yes USERCTL=no /etc/modprob.d/bonding.conf alias bond0 bonding options bond0 mode=5 miimon=100 Bonding worked great in Centos 5.x, not so well for me in Centos 6.2. My goal is to get this working under bridging for KVM, I can only imagine the nightmare seeing I can't get a simple bond to work! Any guidance is golden. - aurf ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos >>> I spent two months on bonding two nics inside a box to a bridge in the box. >>> There is a bug, very prominent in fedora bugzillas about it. >>> You cannot do it without some modification. Libvirt loses some vms, no >>> way to make it work that I know of >>> except for those suggested changes which I did not try. >>> >>> if you look in your libvirt logs you will see xml bond errorsand >>> thus impossible to do inside of the box. >>> this only applies if the bonded nics and bridge are all in the same box, >>> >>> also, the options should no longer go in bonding.conf, but in the bridge >>> file itself. >>> >>> in all my testing all vms worked except the one assigned vnet0, that >>> always got 'lost'... >>> however, any attempt by the vm to send a signal outside to the net, >>> would cause it to be found again.. >>> >>> this bug is not fixed in 6 or in latest fedora when i last >>> checkedthere are self made patches in fedora bugzilla though. >> Hi Bob, >> >> WOW, ok cool. >> >> I will simply do 2 bridges and allocate some of my guests to either for a >> sort of manual load balancing. >> >> Good info to know. >> >> Really appreciate the feedback. >> >> - aurf >> ___ >> CentOS mailing list >> CentOS@centos.org >> http://lists.centos.org/mailman/listinfo/centos >> >> > and dont forget a lot of the bond modes require a second device like a > switch...i think 0 and 6 were the ones I tried > > I really wanted the bond, but decided to blow some ips and just use > extra bridges to try to balance. > It was not fun at all finding this bug...lol > > I think the reason they do not want to get into it is alomost everyone > uses bond/bridges outside of the single server and it is not an > issue...and to rewrite and debug all that for a few of us that are crazy > to do such single box bridge bond, well, we in't gonna see that > according to the bugzilla responses I saw...still, one can hope Thats a real bummer. I don't get why they think this. I mean whats so strange for one to bond interfaces anyways on a system? Oh well, multi bridges are fine for me. Funny, my Blow Leopard (OSX 10.6.8) and Cryin (OSX 10.7) Servers trunk fine with my Foundry switch at 802.3ad. - aurf > ___ > CentOS mailing list > CentOS@centos.org > http://lists.centos.org/mailman/listinfo/centos ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] True bond howto for Centos 6
On 5/13/2012 12:30 PM, aurfalien wrote: > On May 13, 2012, at 12:23 PM, bob wrote: > >> On 5/13/2012 11:45 AM, aurfalien wrote: >>> Hi all, >>> >>> Read many posts on the subject. >>> >>> Using 802.3ad. >>> >>> Few problems; >>> Cannot ping some hosts on the network, they are all up. >>> Cannot resolve via DNS which is one of the hosts that I cannot ping, >>> internal nor external DNS hosts. >>> Unplugging the NICS and plugging them back in will then not allow pining if >>> the default d=gateway. >>> >>> When cold booting it somewhat works, some hosts are pingable while others >>> are not. >>> >>> When restarting the network service via /etc/init.d/network, nothing is >>> pingable. >>> >>> Here are my configs; >>> >>> ifcfg-bond0 >>> DEVICE=bond0 >>> USERCTL=no >>> BOOTPROTO=none >>> ONBOOT=yes >>> IPADDR=10.0.0.10 >>> NETMASK=255.255.0.0 >>> NETWORK=10.0.0.0 >>> TYPE=Unknown >>> IPV6INIT=no >>> >>> ifcfg-eth0 >>> DEVICE=eth0 >>> BOOTPROTO=none >>> ONBOOT=yes >>> MASTER=bond0 >>> SLAVE=yes >>> USERCTL=no >>> >>> ifcfg-eth1 >>> DEVICE=eth1 >>> BOOTPROTO=none >>> ONBOOT=yes >>> MASTER=bond0 >>> SLAVE=yes >>> USERCTL=no >>> >>> /etc/modprob.d/bonding.conf >>> alias bond0 bonding >>> options bond0 mode=5 miimon=100 >>> >>> Bonding worked great in Centos 5.x, not so well for me in Centos 6.2. >>> >>> My goal is to get this working under bridging for KVM, I can only imagine >>> the nightmare seeing I can't get a simple bond to work! >>> >>> Any guidance is golden. >>> >>> - aurf >>> >>> ___ >>> CentOS mailing list >>> CentOS@centos.org >>> http://lists.centos.org/mailman/listinfo/centos >>> >>> >> I spent two months on bonding two nics inside a box to a bridge in the box. >> There is a bug, very prominent in fedora bugzillas about it. >> You cannot do it without some modification. Libvirt loses some vms, no >> way to make it work that I know of >> except for those suggested changes which I did not try. >> >> if you look in your libvirt logs you will see xml bond errorsand >> thus impossible to do inside of the box. >> this only applies if the bonded nics and bridge are all in the same box, >> >> also, the options should no longer go in bonding.conf, but in the bridge >> file itself. >> >> in all my testing all vms worked except the one assigned vnet0, that >> always got 'lost'... >> however, any attempt by the vm to send a signal outside to the net, >> would cause it to be found again.. >> >> this bug is not fixed in 6 or in latest fedora when i last >> checkedthere are self made patches in fedora bugzilla though. > Hi Bob, > > WOW, ok cool. > > I will simply do 2 bridges and allocate some of my guests to either for a > sort of manual load balancing. > > Good info to know. > > Really appreciate the feedback. > > - aurf > ___ > CentOS mailing list > CentOS@centos.org > http://lists.centos.org/mailman/listinfo/centos > > and dont forget a lot of the bond modes require a second device like a switch...i think 0 and 6 were the ones I tried I really wanted the bond, but decided to blow some ips and just use extra bridges to try to balance. It was not fun at all finding this bug...lol I think the reason they do not want to get into it is alomost everyone uses bond/bridges outside of the single server and it is not an issue...and to rewrite and debug all that for a few of us that are crazy to do such single box bridge bond, well, we in't gonna see that according to the bugzilla responses I saw...still, one can hope ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] True bond howto for Centos 6
On May 13, 2012, at 12:23 PM, bob wrote: > On 5/13/2012 11:45 AM, aurfalien wrote: >> Hi all, >> >> Read many posts on the subject. >> >> Using 802.3ad. >> >> Few problems; >> Cannot ping some hosts on the network, they are all up. >> Cannot resolve via DNS which is one of the hosts that I cannot ping, >> internal nor external DNS hosts. >> Unplugging the NICS and plugging them back in will then not allow pining if >> the default d=gateway. >> >> When cold booting it somewhat works, some hosts are pingable while others >> are not. >> >> When restarting the network service via /etc/init.d/network, nothing is >> pingable. >> >> Here are my configs; >> >> ifcfg-bond0 >> DEVICE=bond0 >> USERCTL=no >> BOOTPROTO=none >> ONBOOT=yes >> IPADDR=10.0.0.10 >> NETMASK=255.255.0.0 >> NETWORK=10.0.0.0 >> TYPE=Unknown >> IPV6INIT=no >> >> ifcfg-eth0 >> DEVICE=eth0 >> BOOTPROTO=none >> ONBOOT=yes >> MASTER=bond0 >> SLAVE=yes >> USERCTL=no >> >> ifcfg-eth1 >> DEVICE=eth1 >> BOOTPROTO=none >> ONBOOT=yes >> MASTER=bond0 >> SLAVE=yes >> USERCTL=no >> >> /etc/modprob.d/bonding.conf >> alias bond0 bonding >> options bond0 mode=5 miimon=100 >> >> Bonding worked great in Centos 5.x, not so well for me in Centos 6.2. >> >> My goal is to get this working under bridging for KVM, I can only imagine >> the nightmare seeing I can't get a simple bond to work! >> >> Any guidance is golden. >> >> - aurf >> >> ___ >> CentOS mailing list >> CentOS@centos.org >> http://lists.centos.org/mailman/listinfo/centos >> >> > I spent two months on bonding two nics inside a box to a bridge in the box. > There is a bug, very prominent in fedora bugzillas about it. > You cannot do it without some modification. Libvirt loses some vms, no > way to make it work that I know of > except for those suggested changes which I did not try. > > if you look in your libvirt logs you will see xml bond errorsand > thus impossible to do inside of the box. > this only applies if the bonded nics and bridge are all in the same box, > > also, the options should no longer go in bonding.conf, but in the bridge > file itself. > > in all my testing all vms worked except the one assigned vnet0, that > always got 'lost'... > however, any attempt by the vm to send a signal outside to the net, > would cause it to be found again.. > > this bug is not fixed in 6 or in latest fedora when i last > checkedthere are self made patches in fedora bugzilla though. Hi Bob, WOW, ok cool. I will simply do 2 bridges and allocate some of my guests to either for a sort of manual load balancing. Good info to know. Really appreciate the feedback. - aurf ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] True bond howto for Centos 6
On 5/13/2012 11:45 AM, aurfalien wrote: > Hi all, > > Read many posts on the subject. > > Using 802.3ad. > > Few problems; > Cannot ping some hosts on the network, they are all up. > Cannot resolve via DNS which is one of the hosts that I cannot ping, internal > nor external DNS hosts. > Unplugging the NICS and plugging them back in will then not allow pining if > the default d=gateway. > > When cold booting it somewhat works, some hosts are pingable while others are > not. > > When restarting the network service via /etc/init.d/network, nothing is > pingable. > > Here are my configs; > > ifcfg-bond0 > DEVICE=bond0 > USERCTL=no > BOOTPROTO=none > ONBOOT=yes > IPADDR=10.0.0.10 > NETMASK=255.255.0.0 > NETWORK=10.0.0.0 > TYPE=Unknown > IPV6INIT=no > > ifcfg-eth0 > DEVICE=eth0 > BOOTPROTO=none > ONBOOT=yes > MASTER=bond0 > SLAVE=yes > USERCTL=no > > ifcfg-eth1 > DEVICE=eth1 > BOOTPROTO=none > ONBOOT=yes > MASTER=bond0 > SLAVE=yes > USERCTL=no > > /etc/modprob.d/bonding.conf > alias bond0 bonding > options bond0 mode=5 miimon=100 > > Bonding worked great in Centos 5.x, not so well for me in Centos 6.2. > > My goal is to get this working under bridging for KVM, I can only imagine the > nightmare seeing I can't get a simple bond to work! > > Any guidance is golden. > > - aurf > > ___ > CentOS mailing list > CentOS@centos.org > http://lists.centos.org/mailman/listinfo/centos > > I spent two months on bonding two nics inside a box to a bridge in the box. There is a bug, very prominent in fedora bugzillas about it. You cannot do it without some modification. Libvirt loses some vms, no way to make it work that I know of except for those suggested changes which I did not try. if you look in your libvirt logs you will see xml bond errorsand thus impossible to do inside of the box. this only applies if the bonded nics and bridge are all in the same box, also, the options should no longer go in bonding.conf, but in the bridge file itself. in all my testing all vms worked except the one assigned vnet0, that always got 'lost'... however, any attempt by the vm to send a signal outside to the net, would cause it to be found again.. this bug is not fixed in 6 or in latest fedora when i last checkedthere are self made patches in fedora bugzilla though. ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] True bond howto for Centos 6 TYPO correction
SORRY typo; > options bond0 mode=5 miimon=100 is really options bond0 mode=4 miimon=100 On May 13, 2012, at 11:45 AM, aurfalien wrote: > Hi all, > > Read many posts on the subject. > > Using 802.3ad. > > Few problems; > Cannot ping some hosts on the network, they are all up. > Cannot resolve via DNS which is one of the hosts that I cannot ping, internal > nor external DNS hosts. > Unplugging the NICS and plugging them back in will then not allow pining if > the default d=gateway. > > When cold booting it somewhat works, some hosts are pingable while others are > not. > > When restarting the network service via /etc/init.d/network, nothing is > pingable. > > Here are my configs; > > ifcfg-bond0 > DEVICE=bond0 > USERCTL=no > BOOTPROTO=none > ONBOOT=yes > IPADDR=10.0.0.10 > NETMASK=255.255.0.0 > NETWORK=10.0.0.0 > TYPE=Unknown > IPV6INIT=no > > ifcfg-eth0 > DEVICE=eth0 > BOOTPROTO=none > ONBOOT=yes > MASTER=bond0 > SLAVE=yes > USERCTL=no > > ifcfg-eth1 > DEVICE=eth1 > BOOTPROTO=none > ONBOOT=yes > MASTER=bond0 > SLAVE=yes > USERCTL=no > > /etc/modprob.d/bonding.conf > alias bond0 bonding > options bond0 mode=5 miimon=100 > > Bonding worked great in Centos 5.x, not so well for me in Centos 6.2. > > My goal is to get this working under bridging for KVM, I can only imagine the > nightmare seeing I can't get a simple bond to work! > > Any guidance is golden. > > - aurf > ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
