[ceph-users] Re: Replacing swift with RGW

[Michel Niyoyita]

Hello Eugen

Thank you very much for your guidance and support , now everything is
working fine , RGW has been replaced swift as I wanted.

Michel

On Thu, 9 Sep 2021, 13:59 Michel Niyoyita,  wrote:

> Hello Eugen,
>
> Are there other config done on the OpenStack side except creating
> endpoints?I would like to check maybe if I miss something in authentication
> because up to now the dashboard has the same proble. once click on the
> containers it automatically disconnect .
>
> Thanks for your  usual support
>
> On Mon, Sep 6, 2021 at 4:50 PM Eugen Block  wrote:
>
>> It's hard to tell what is wrong with your setup, I don't really use
>> mine but this was the last working config I had to be able to create
>> swift containers directly in RGW:
>>
>> ---snip---
>> # ceph.conf:
>>
>> [client.rgw.ses6-mon1]
>> rgw frontends = "beast port=80"
>> rgw dns name = ses6-mon1.example.com
>> rgw enable usage log = true
>>
>> rgw thread pool size = 512
>> rgw keystone api version = 3
>> rgw keystone url = http://control-node.example.com:5000
>>
>> rgw keystone admin user = rgw
>> rgw keystone admin password = 
>> rgw keystone admin domain = default
>> rgw keystone admin project = service
>> rgw keystone accepted roles = admin,Member,_member_,member
>> rgw keystone verify ssl = false
>> rgw s3 auth use keystone = true
>> rgw keystone revocation interval = 0
>>
>>
>> # User role (I don't think admin is required)
>>
>> openstack role add --user rgw --project 9e8a67da237a4b26afb2819d2dea2219
>> admin
>>
>>
>> # Create keystone endpoints
>>
>> openstack endpoint create --region RegionOne swift admin
>> "http://ses6-mon1.example.com:80/swift/v1;
>> openstack endpoint create --region RegionOne swift internal
>> "http://ses6-mon1.example.com:80/swift/v1;
>> openstack endpoint create --region RegionOne swift public
>> "http://ses6-mon1.example.com:80/swift/v1;
>>
>>
>> # Create container and files
>>
>> openstack container create swift1
>>
>> +-+---+---+
>> | account | container | x-trans-id
>> |
>>
>> +-+---+---+
>> | v1  | swift1| tx1-0060b4ba48-d724dc-default
>> |
>>
>> +-+---+---+
>>
>> openstack object create --name file1 swift1 chef-client.log
>> ++---+--+
>> | object | container | etag |
>> ++---+--+
>> | file1  | swift1| 56a1ed3b201c1e753bcbe80c640349f7 |
>> ++---+--+
>> ---snip---
>>
>>
>> You are mixing dns names and IP addresses, I can't tell if that's a
>> problem but it probably should work, I'm not sure. Compared to my
>> ceph.conf these are the major differences:
>>
>> rgw keystone verify ssl = false
>> rgw s3 auth use keystone = true
>> rgw keystone revocation interval = 0
>>
>> And I don't use rgw_keystone_token_cache_size. Maybe try again with
>> the options I use.
>>
>>
>> Zitat von Michel Niyoyita :
>>
>> > Hello,
>> >
>> > I am trying to replace swift by RGW as backend storage but I failed
>> once I
>> > try to post a container in the OpenStack side however, all interfaces
>> are
>> > configured (admin, public and internal). but Once I post from RGW host
>> it
>> > is created .  Another issue is that object storage does not appear on
>> the
>> > horizon dashboard .  I have deployed openstack all-in-one using
>> > kolla-ansible and Os is ubuntu
>> >
>> > (kolla-open1) stack@kolla-open1:~$ swift -v post myswift
>> > Container POST failed: http://ceph-osd3:8080/swift/v1/myswift 401
>> > Unauthorized   b'AccessDenied'
>> > Failed Transaction ID: tx8-006135dcbd-87d63-default
>> >
>> > (kolla-open1) stack@kolla-open1:~$ swift list
>> > Account GET failed: http://ceph-osd3:8080/swift/v1?format=json 401
>> > Unauthorized  [first 60 chars of response]
>> > b'{"Code":"AccessDenied","RequestId":"txc-'
>> > Failed Transaction ID: txc-006135de42-87d63-default
>> >
>> > Kindly help to solve the issue
>

[ceph-users] Re: Replacing swift with RGW

[Michel Niyoyita]

Below are errors I am getting once I try to run swift commands . the second
one is the error I get once try to install python-swiftclient

(kolla-open) [stack@kolla-open ~]$ swift -v stat
-bash: swift: command not found
(kolla-open) [stack@kolla-open ~]$ sudo yum -y install python-swiftclient
Last metadata expiration check: 0:59:21 ago on Thu 02 Sep 2021 09:21:53 AM
CAT.
No match for argument: python-swiftclient
Error: Unable to find a match: python-swiftclient
(kolla-open) [stack@kolla-open ~]$

Waiting for your help

On Thu, Sep 2, 2021 at 10:17 AM Eugen Block  wrote:

> I can't tell for sure, but yes, I believe you need the openstack-swift
> package (with dependencies). What errors do you get? The more
> information you share the better people can help.
>
>
> Zitat von Michel Niyoyita :
>
> > I tried to install  "sudo yum -y install python-swiftclient" on openstack
> > side but fails . are there openastack-shwift packages which are needed?
> > if are there please help me to get .  may be also it is the cause I am
> > failing to run swift command on openstack cli side.
> >
> > thank you for your continued support.
> >
> > Micheal
> >
> > On Thu, Sep 2, 2021 at 9:14 AM Eugen Block  wrote:
> >
> >> I only configured the endpoints for the clients to directly access the
> >> RGWs, but you'll probably need to install the openstack-swift package.
> >> Or have you done that already?
> >>
> >>
> >> Zitat von Michel Niyoyita :
> >>
> >> > Thank  you Eugen for your prompt response.
> >> >
> >> > Now the commands provided work. but I am not finding the object
> storage
> >> on
> >> > the horizon dashboard , but it appears in the system information
> >> services.
> >> > [image: image.png]
> >> > so my question is how to configure it in order that it can appear in
> the
> >> > dashboard .
> >> >
> >> > Michel
> >> >
> >> > On Wed, Sep 1, 2021 at 3:49 PM Eugen Block  wrote:
> >> >
> >> >> Sorry, one little detail slipped through, the '--region' flag has to
> >> >> be put before the 'service' name. The correct command would be:
> >> >>
> >> >> openstack endpoint create --region RegionOne swift admin
> >> >> http://ceph-osd3:8080/swift/v1
> >> >>
> >> >> and respectively for the other interfaces.
> >> >>
> >> >>
> >> >> Zitat von Eugen Block :
> >> >>
> >> >> > Hi,
> >> >> >
> >> >> > this is not a ceph issue but your openstack cli command as the
> error
> >> >> > message states.
> >> >> >
> >> >> > Try one interface at a time:
> >> >> >
> >> >> > openstack endpoint create swift public
> >> >> > http://ceph-osd3:8080/swift/v1 --region RegionOne swift
> >> >> > openstack endpoint create swift admin
> http://ceph-osd3:8080/swift/v1
> >> >> > --region RegionOne swift
> >> >> > openstack endpoint create swift internal
> >> >> > http://ceph-osd3:8080/swift/v1 --region RegionOne swift
> >> >> >
> >> >> >
> >> >> > Zitat von Michel Niyoyita :
> >> >> >
> >> >> >> Hello ,
> >> >> >>
> >> >> >> Below are errors I am getting once I am trying to integrate swift
> >> with
> >> >> >> Radosgateway.
> >> >> >>
> >> >> >> From openstack side once i try to endpoint which will point to the
> >> >> >> radosgateway :
> >> >> >>
> >> >> >> (kolla-open) [stack@kolla-open kolla]$ openstack endpoint create
> >> >> >> --publicurl http://ceph-osd3:8080/swift/v1 --adminurl
> >> >> >> http://ceph-osd3:8080/swift/v1 --internal
> >> >> http://ceph-osd3:8080/swift/v1
> >> >> >> --region RegionOne swift
> >> >> >> usage: openstack endpoint create [-h] [-f
> >> {json,shell,table,value,yaml}]
> >> >> >> [-c COLUMN] [--noindent] [--prefix
> >> >> PREFIX]
> >> >> >> [--max-width ]
> [--fit-width]
> >> >> >> [--print-empty] [--region
> >> ]
> >> >> >> [--enable | --disable]
> >> >> >>   
> >> >> >> openstack endpoint create: error: argument : invalid
> >> choice:
> >> >> '
> >> >> >> http://ceph-osd3:8080/swift/v1' (choose from 'admin', 'public',
> >> >> 'internal')
> >> >> >>
> >> >> >> (kolla-open) [stack@kolla-open kolla]$
> >> >> >>
> >> >> >> below are my /etc/ceph/ceph.conf file :
> >> >> >>
> >> >> >> [client.rgw.ceph-osd3]
> >> >> >> rgw_dns_name = ceph-osd3
> >> >> >> host = ceph-osd3
> >> >> >> keyring = /var/lib/ceph/radosgw/ceph-rgw.ceph-osd3/keyring
> >> >> >> log file = /var/log/ceph/ceph-rgw-ceph-osd3.log
> >> >> >> rgw frontends = civetweb port=10.10.29.110:8080 num_threads=100
> >> >> >> rgw_keystone_url=http://10.10.29.150:35357
> >> >> >> rgw_keystone_admin_user=admin
> >> >> >> rgw_keystone_admin_password=admin
> >> >> >> rgw_keystone_admin_tenant=admin
> >> >> >> rgw_keystone_accepted_role=admin Member swiftoperator
> >> >> >> rgw_keystone_token_cache_size=200
> >> >> >> rgw_keystone_revocation_interval=300
> >> >> >>
> >> >> >> [client.rgw.ceph-osd3.rgw0]
> >> >> >> host = ceph-osd3
> >> >> >> keyring = /var/lib/ceph/radosgw/ceph-rgw.ceph-osd3.rgw0/keyring
> >> >> >> log file 

[ceph-users] Re: Replacing swift with RGW

[Eugen Block]

I can't tell for sure, but yes, I believe you need the openstack-swift  
package (with dependencies). What errors do you get? The more  
information you share the better people can help.



Zitat von Michel Niyoyita :


I tried to install  "sudo yum -y install python-swiftclient" on openstack
side but fails . are there openastack-shwift packages which are needed?
if are there please help me to get .  may be also it is the cause I am
failing to run swift command on openstack cli side.

thank you for your continued support.

Micheal

On Thu, Sep 2, 2021 at 9:14 AM Eugen Block  wrote:


I only configured the endpoints for the clients to directly access the
RGWs, but you'll probably need to install the openstack-swift package.
Or have you done that already?


Zitat von Michel Niyoyita :

> Thank  you Eugen for your prompt response.
>
> Now the commands provided work. but I am not finding the object storage
on
> the horizon dashboard , but it appears in the system information
services.
> [image: image.png]
> so my question is how to configure it in order that it can appear in the
> dashboard .
>
> Michel
>
> On Wed, Sep 1, 2021 at 3:49 PM Eugen Block  wrote:
>
>> Sorry, one little detail slipped through, the '--region' flag has to
>> be put before the 'service' name. The correct command would be:
>>
>> openstack endpoint create --region RegionOne swift admin
>> http://ceph-osd3:8080/swift/v1
>>
>> and respectively for the other interfaces.
>>
>>
>> Zitat von Eugen Block :
>>
>> > Hi,
>> >
>> > this is not a ceph issue but your openstack cli command as the error
>> > message states.
>> >
>> > Try one interface at a time:
>> >
>> > openstack endpoint create swift public
>> > http://ceph-osd3:8080/swift/v1 --region RegionOne swift
>> > openstack endpoint create swift admin http://ceph-osd3:8080/swift/v1
>> > --region RegionOne swift
>> > openstack endpoint create swift internal
>> > http://ceph-osd3:8080/swift/v1 --region RegionOne swift
>> >
>> >
>> > Zitat von Michel Niyoyita :
>> >
>> >> Hello ,
>> >>
>> >> Below are errors I am getting once I am trying to integrate swift
with
>> >> Radosgateway.
>> >>
>> >> From openstack side once i try to endpoint which will point to the
>> >> radosgateway :
>> >>
>> >> (kolla-open) [stack@kolla-open kolla]$ openstack endpoint create
>> >> --publicurl http://ceph-osd3:8080/swift/v1 --adminurl
>> >> http://ceph-osd3:8080/swift/v1 --internal
>> http://ceph-osd3:8080/swift/v1
>> >> --region RegionOne swift
>> >> usage: openstack endpoint create [-h] [-f
{json,shell,table,value,yaml}]
>> >> [-c COLUMN] [--noindent] [--prefix
>> PREFIX]
>> >> [--max-width ] [--fit-width]
>> >> [--print-empty] [--region
]
>> >> [--enable | --disable]
>> >>   
>> >> openstack endpoint create: error: argument : invalid
choice:
>> '
>> >> http://ceph-osd3:8080/swift/v1' (choose from 'admin', 'public',
>> 'internal')
>> >>
>> >> (kolla-open) [stack@kolla-open kolla]$
>> >>
>> >> below are my /etc/ceph/ceph.conf file :
>> >>
>> >> [client.rgw.ceph-osd3]
>> >> rgw_dns_name = ceph-osd3
>> >> host = ceph-osd3
>> >> keyring = /var/lib/ceph/radosgw/ceph-rgw.ceph-osd3/keyring
>> >> log file = /var/log/ceph/ceph-rgw-ceph-osd3.log
>> >> rgw frontends = civetweb port=10.10.29.110:8080 num_threads=100
>> >> rgw_keystone_url=http://10.10.29.150:35357
>> >> rgw_keystone_admin_user=admin
>> >> rgw_keystone_admin_password=admin
>> >> rgw_keystone_admin_tenant=admin
>> >> rgw_keystone_accepted_role=admin Member swiftoperator
>> >> rgw_keystone_token_cache_size=200
>> >> rgw_keystone_revocation_interval=300
>> >>
>> >> [client.rgw.ceph-osd3.rgw0]
>> >> host = ceph-osd3
>> >> keyring = /var/lib/ceph/radosgw/ceph-rgw.ceph-osd3.rgw0/keyring
>> >> log file = /var/log/ceph/ceph-rgw-ceph-osd3.rgw0.log
>> >> rgw frontends = beast endpoint=10.10.29.110:8080
>> >> rgw thread pool size = 512
>> >>
>> >> please note that my rgw_dns_name = ceph_osd3 with 10.10.29.110 as IP
>> >>
>> >> and 10.10.29.150 all-in-one IP
>> >>
>> >>
>> >> Please crosscheck where I might make mistake and try to correct.
>> >>
>> >> Best regards
>> >>
>> >> Michel
>> >>
>> >> On Mon, Aug 30, 2021 at 11:25 AM Etienne Menguy <
>> etienne.men...@croit.io>
>> >> wrote:
>> >>
>> >>> Hi,
>> >>>
>> >>> There are some information on Ceph documentation
>> >>> https://docs.ceph.com/en/latest/radosgw/keystone/ <
>> >>> https://docs.ceph.com/en/latest/radosgw/keystone/> .
>> >>> - Use keystone as auth for RGW
>> >>> - Create service and register your RGW as swift
>> >>>
>> >>> Étienne
>> >>>
>>  On 27 Aug 2021, at 15:47, Michel Niyoyita 
wrote:
>> 
>>  Hello ,
>> 
>>  I have configured RGW in my ceph cluster deployed using ceph
ansible
>> and
>>  create sub user to access the created containers and would like to
>> >>> replace
>>  swift by RGW in the openstack side. Anyone can 

[ceph-users] Re: Replacing swift with RGW

[Michel Niyoyita]

I tried to install  "sudo yum -y install python-swiftclient" on openstack
side but fails . are there openastack-shwift packages which are needed?
if are there please help me to get .  may be also it is the cause I am
failing to run swift command on openstack cli side.

thank you for your continued support.

Micheal

On Thu, Sep 2, 2021 at 9:14 AM Eugen Block  wrote:

> I only configured the endpoints for the clients to directly access the
> RGWs, but you'll probably need to install the openstack-swift package.
> Or have you done that already?
>
>
> Zitat von Michel Niyoyita :
>
> > Thank  you Eugen for your prompt response.
> >
> > Now the commands provided work. but I am not finding the object storage
> on
> > the horizon dashboard , but it appears in the system information
> services.
> > [image: image.png]
> > so my question is how to configure it in order that it can appear in the
> > dashboard .
> >
> > Michel
> >
> > On Wed, Sep 1, 2021 at 3:49 PM Eugen Block  wrote:
> >
> >> Sorry, one little detail slipped through, the '--region' flag has to
> >> be put before the 'service' name. The correct command would be:
> >>
> >> openstack endpoint create --region RegionOne swift admin
> >> http://ceph-osd3:8080/swift/v1
> >>
> >> and respectively for the other interfaces.
> >>
> >>
> >> Zitat von Eugen Block :
> >>
> >> > Hi,
> >> >
> >> > this is not a ceph issue but your openstack cli command as the error
> >> > message states.
> >> >
> >> > Try one interface at a time:
> >> >
> >> > openstack endpoint create swift public
> >> > http://ceph-osd3:8080/swift/v1 --region RegionOne swift
> >> > openstack endpoint create swift admin http://ceph-osd3:8080/swift/v1
> >> > --region RegionOne swift
> >> > openstack endpoint create swift internal
> >> > http://ceph-osd3:8080/swift/v1 --region RegionOne swift
> >> >
> >> >
> >> > Zitat von Michel Niyoyita :
> >> >
> >> >> Hello ,
> >> >>
> >> >> Below are errors I am getting once I am trying to integrate swift
> with
> >> >> Radosgateway.
> >> >>
> >> >> From openstack side once i try to endpoint which will point to the
> >> >> radosgateway :
> >> >>
> >> >> (kolla-open) [stack@kolla-open kolla]$ openstack endpoint create
> >> >> --publicurl http://ceph-osd3:8080/swift/v1 --adminurl
> >> >> http://ceph-osd3:8080/swift/v1 --internal
> >> http://ceph-osd3:8080/swift/v1
> >> >> --region RegionOne swift
> >> >> usage: openstack endpoint create [-h] [-f
> {json,shell,table,value,yaml}]
> >> >> [-c COLUMN] [--noindent] [--prefix
> >> PREFIX]
> >> >> [--max-width ] [--fit-width]
> >> >> [--print-empty] [--region
> ]
> >> >> [--enable | --disable]
> >> >>   
> >> >> openstack endpoint create: error: argument : invalid
> choice:
> >> '
> >> >> http://ceph-osd3:8080/swift/v1' (choose from 'admin', 'public',
> >> 'internal')
> >> >>
> >> >> (kolla-open) [stack@kolla-open kolla]$
> >> >>
> >> >> below are my /etc/ceph/ceph.conf file :
> >> >>
> >> >> [client.rgw.ceph-osd3]
> >> >> rgw_dns_name = ceph-osd3
> >> >> host = ceph-osd3
> >> >> keyring = /var/lib/ceph/radosgw/ceph-rgw.ceph-osd3/keyring
> >> >> log file = /var/log/ceph/ceph-rgw-ceph-osd3.log
> >> >> rgw frontends = civetweb port=10.10.29.110:8080 num_threads=100
> >> >> rgw_keystone_url=http://10.10.29.150:35357
> >> >> rgw_keystone_admin_user=admin
> >> >> rgw_keystone_admin_password=admin
> >> >> rgw_keystone_admin_tenant=admin
> >> >> rgw_keystone_accepted_role=admin Member swiftoperator
> >> >> rgw_keystone_token_cache_size=200
> >> >> rgw_keystone_revocation_interval=300
> >> >>
> >> >> [client.rgw.ceph-osd3.rgw0]
> >> >> host = ceph-osd3
> >> >> keyring = /var/lib/ceph/radosgw/ceph-rgw.ceph-osd3.rgw0/keyring
> >> >> log file = /var/log/ceph/ceph-rgw-ceph-osd3.rgw0.log
> >> >> rgw frontends = beast endpoint=10.10.29.110:8080
> >> >> rgw thread pool size = 512
> >> >>
> >> >> please note that my rgw_dns_name = ceph_osd3 with 10.10.29.110 as IP
> >> >>
> >> >> and 10.10.29.150 all-in-one IP
> >> >>
> >> >>
> >> >> Please crosscheck where I might make mistake and try to correct.
> >> >>
> >> >> Best regards
> >> >>
> >> >> Michel
> >> >>
> >> >> On Mon, Aug 30, 2021 at 11:25 AM Etienne Menguy <
> >> etienne.men...@croit.io>
> >> >> wrote:
> >> >>
> >> >>> Hi,
> >> >>>
> >> >>> There are some information on Ceph documentation
> >> >>> https://docs.ceph.com/en/latest/radosgw/keystone/ <
> >> >>> https://docs.ceph.com/en/latest/radosgw/keystone/> .
> >> >>> - Use keystone as auth for RGW
> >> >>> - Create service and register your RGW as swift
> >> >>>
> >> >>> Étienne
> >> >>>
> >>  On 27 Aug 2021, at 15:47, Michel Niyoyita 
> wrote:
> >> 
> >>  Hello ,
> >> 
> >>  I have configured RGW in my ceph cluster deployed using ceph
> ansible
> >> and
> >>  create sub user to access the created containers and would like to
> >> >>> replace
> >> 

[ceph-users] Re: Replacing swift with RGW

[Eugen Block]

I only configured the endpoints for the clients to directly access the  
RGWs, but you'll probably need to install the openstack-swift package.  
Or have you done that already?



Zitat von Michel Niyoyita :


Thank  you Eugen for your prompt response.

Now the commands provided work. but I am not finding the object storage on
the horizon dashboard , but it appears in the system information services.
[image: image.png]
so my question is how to configure it in order that it can appear in the
dashboard .

Michel

On Wed, Sep 1, 2021 at 3:49 PM Eugen Block  wrote:


Sorry, one little detail slipped through, the '--region' flag has to
be put before the 'service' name. The correct command would be:

openstack endpoint create --region RegionOne swift admin
http://ceph-osd3:8080/swift/v1

and respectively for the other interfaces.


Zitat von Eugen Block :

> Hi,
>
> this is not a ceph issue but your openstack cli command as the error
> message states.
>
> Try one interface at a time:
>
> openstack endpoint create swift public
> http://ceph-osd3:8080/swift/v1 --region RegionOne swift
> openstack endpoint create swift admin http://ceph-osd3:8080/swift/v1
> --region RegionOne swift
> openstack endpoint create swift internal
> http://ceph-osd3:8080/swift/v1 --region RegionOne swift
>
>
> Zitat von Michel Niyoyita :
>
>> Hello ,
>>
>> Below are errors I am getting once I am trying to integrate swift with
>> Radosgateway.
>>
>> From openstack side once i try to endpoint which will point to the
>> radosgateway :
>>
>> (kolla-open) [stack@kolla-open kolla]$ openstack endpoint create
>> --publicurl http://ceph-osd3:8080/swift/v1 --adminurl
>> http://ceph-osd3:8080/swift/v1 --internal
http://ceph-osd3:8080/swift/v1
>> --region RegionOne swift
>> usage: openstack endpoint create [-h] [-f {json,shell,table,value,yaml}]
>> [-c COLUMN] [--noindent] [--prefix
PREFIX]
>> [--max-width ] [--fit-width]
>> [--print-empty] [--region ]
>> [--enable | --disable]
>>   
>> openstack endpoint create: error: argument : invalid choice:
'
>> http://ceph-osd3:8080/swift/v1' (choose from 'admin', 'public',
'internal')
>>
>> (kolla-open) [stack@kolla-open kolla]$
>>
>> below are my /etc/ceph/ceph.conf file :
>>
>> [client.rgw.ceph-osd3]
>> rgw_dns_name = ceph-osd3
>> host = ceph-osd3
>> keyring = /var/lib/ceph/radosgw/ceph-rgw.ceph-osd3/keyring
>> log file = /var/log/ceph/ceph-rgw-ceph-osd3.log
>> rgw frontends = civetweb port=10.10.29.110:8080 num_threads=100
>> rgw_keystone_url=http://10.10.29.150:35357
>> rgw_keystone_admin_user=admin
>> rgw_keystone_admin_password=admin
>> rgw_keystone_admin_tenant=admin
>> rgw_keystone_accepted_role=admin Member swiftoperator
>> rgw_keystone_token_cache_size=200
>> rgw_keystone_revocation_interval=300
>>
>> [client.rgw.ceph-osd3.rgw0]
>> host = ceph-osd3
>> keyring = /var/lib/ceph/radosgw/ceph-rgw.ceph-osd3.rgw0/keyring
>> log file = /var/log/ceph/ceph-rgw-ceph-osd3.rgw0.log
>> rgw frontends = beast endpoint=10.10.29.110:8080
>> rgw thread pool size = 512
>>
>> please note that my rgw_dns_name = ceph_osd3 with 10.10.29.110 as IP
>>
>> and 10.10.29.150 all-in-one IP
>>
>>
>> Please crosscheck where I might make mistake and try to correct.
>>
>> Best regards
>>
>> Michel
>>
>> On Mon, Aug 30, 2021 at 11:25 AM Etienne Menguy <
etienne.men...@croit.io>
>> wrote:
>>
>>> Hi,
>>>
>>> There are some information on Ceph documentation
>>> https://docs.ceph.com/en/latest/radosgw/keystone/ <
>>> https://docs.ceph.com/en/latest/radosgw/keystone/> .
>>> - Use keystone as auth for RGW
>>> - Create service and register your RGW as swift
>>>
>>> Étienne
>>>
 On 27 Aug 2021, at 15:47, Michel Niyoyita  wrote:

 Hello ,

 I have configured RGW in my ceph cluster deployed using ceph ansible
and
 create sub user to access the created containers and would like to
>>> replace
 swift by RGW in the openstack side. Anyone can help on configuration
to
>>> be
 done in the OpenStack side in order to integrate those services. I
have
 deployed OpenStack wallaby using Kolla-ansible on ubuntu 20.04. and
ceph
 pacific 16.2.5 was deployed using ansible on ubuntu 20.04

 Kindly help for the configuration or documentation.

 Best Regards

 Michel
 ___
 ceph-users mailing list -- ceph-users@ceph.io
 To unsubscribe send an email to ceph-users-le...@ceph.io
>>>
>>> ___
>>> ceph-users mailing list -- ceph-users@ceph.io
>>> To unsubscribe send an email to ceph-users-le...@ceph.io
>>>
>> ___
>> ceph-users mailing list -- ceph-users@ceph.io
>> To unsubscribe send an email to ceph-users-le...@ceph.io



___
ceph-users mailing list -- 

[ceph-users] Re: Replacing swift with RGW

[Eugen Block]

Sorry, one little detail slipped through, the '--region' flag has to  
be put before the 'service' name. The correct command would be:


openstack endpoint create --region RegionOne swift admin  
http://ceph-osd3:8080/swift/v1


and respectively for the other interfaces.


Zitat von Eugen Block :


Hi,

this is not a ceph issue but your openstack cli command as the error  
message states.


Try one interface at a time:

openstack endpoint create swift public  
http://ceph-osd3:8080/swift/v1 --region RegionOne swift
openstack endpoint create swift admin http://ceph-osd3:8080/swift/v1  
--region RegionOne swift
openstack endpoint create swift internal  
http://ceph-osd3:8080/swift/v1 --region RegionOne swift



Zitat von Michel Niyoyita :


Hello ,

Below are errors I am getting once I am trying to integrate swift with
Radosgateway.

From openstack side once i try to endpoint which will point to the
radosgateway :

(kolla-open) [stack@kolla-open kolla]$ openstack endpoint create
--publicurl http://ceph-osd3:8080/swift/v1 --adminurl
http://ceph-osd3:8080/swift/v1 --internal http://ceph-osd3:8080/swift/v1
--region RegionOne swift
usage: openstack endpoint create [-h] [-f {json,shell,table,value,yaml}]
[-c COLUMN] [--noindent] [--prefix PREFIX]
[--max-width ] [--fit-width]
[--print-empty] [--region ]
[--enable | --disable]
  
openstack endpoint create: error: argument : invalid choice: '
http://ceph-osd3:8080/swift/v1' (choose from 'admin', 'public', 'internal')

(kolla-open) [stack@kolla-open kolla]$

below are my /etc/ceph/ceph.conf file :

[client.rgw.ceph-osd3]
rgw_dns_name = ceph-osd3
host = ceph-osd3
keyring = /var/lib/ceph/radosgw/ceph-rgw.ceph-osd3/keyring
log file = /var/log/ceph/ceph-rgw-ceph-osd3.log
rgw frontends = civetweb port=10.10.29.110:8080 num_threads=100
rgw_keystone_url=http://10.10.29.150:35357
rgw_keystone_admin_user=admin
rgw_keystone_admin_password=admin
rgw_keystone_admin_tenant=admin
rgw_keystone_accepted_role=admin Member swiftoperator
rgw_keystone_token_cache_size=200
rgw_keystone_revocation_interval=300

[client.rgw.ceph-osd3.rgw0]
host = ceph-osd3
keyring = /var/lib/ceph/radosgw/ceph-rgw.ceph-osd3.rgw0/keyring
log file = /var/log/ceph/ceph-rgw-ceph-osd3.rgw0.log
rgw frontends = beast endpoint=10.10.29.110:8080
rgw thread pool size = 512

please note that my rgw_dns_name = ceph_osd3 with 10.10.29.110 as IP

and 10.10.29.150 all-in-one IP


Please crosscheck where I might make mistake and try to correct.

Best regards

Michel

On Mon, Aug 30, 2021 at 11:25 AM Etienne Menguy 
wrote:


Hi,

There are some information on Ceph documentation
https://docs.ceph.com/en/latest/radosgw/keystone/ <
https://docs.ceph.com/en/latest/radosgw/keystone/> .
- Use keystone as auth for RGW
- Create service and register your RGW as swift

Étienne


On 27 Aug 2021, at 15:47, Michel Niyoyita  wrote:

Hello ,

I have configured RGW in my ceph cluster deployed using ceph ansible and
create sub user to access the created containers and would like to

replace

swift by RGW in the openstack side. Anyone can help on configuration to

be

done in the OpenStack side in order to integrate those services. I have
deployed OpenStack wallaby using Kolla-ansible on ubuntu 20.04. and ceph
pacific 16.2.5 was deployed using ansible on ubuntu 20.04

Kindly help for the configuration or documentation.

Best Regards

Michel
___
ceph-users mailing list -- ceph-users@ceph.io
To unsubscribe send an email to ceph-users-le...@ceph.io


___
ceph-users mailing list -- ceph-users@ceph.io
To unsubscribe send an email to ceph-users-le...@ceph.io


___
ceph-users mailing list -- ceph-users@ceph.io
To unsubscribe send an email to ceph-users-le...@ceph.io




___
ceph-users mailing list -- ceph-users@ceph.io
To unsubscribe send an email to ceph-users-le...@ceph.io

[ceph-users] Re: Replacing swift with RGW

[Eugen Block]

Please read carefully and inspect the (helpful) error message. The  
command I provided doesn't have the '--publicurl' in it because that  
is from an older identity api version (v2). In newer versions (v3) the  
endpoint commands only require one of the values 'internal', 'public'  
or 'admin', without any flag. Please check again my last response.



Zitat von Michel Niyoyita :


Hi Eugen

Below is another erro I am getting once I try one interface.

(kolla-open) [stack@kolla-open kolla]$ openstack endpoint create
--publicurl http://ceph-osd3:8080/swift/v1 --region RegionOne
usage: openstack endpoint create [-h] [-f {json,shell,table,value,yaml}]
 [-c COLUMN] [--noindent] [--prefix PREFIX]
 [--max-width ] [--fit-width]
 [--print-empty] [--region ]
 [--enable | --disable]
   
openstack endpoint create: error: the following arguments are required:
, 

(kolla-open) [stack@kolla-open kolla]$

Michel




___
ceph-users mailing list -- ceph-users@ceph.io
To unsubscribe send an email to ceph-users-le...@ceph.io

[ceph-users] Re: Replacing swift with RGW

[Michel Niyoyita]

Hi Eugen

Below is another erro I am getting once I try one interface.

(kolla-open) [stack@kolla-open kolla]$ openstack endpoint create
--publicurl http://ceph-osd3:8080/swift/v1 --region RegionOne
usage: openstack endpoint create [-h] [-f {json,shell,table,value,yaml}]
 [-c COLUMN] [--noindent] [--prefix PREFIX]
 [--max-width ] [--fit-width]
 [--print-empty] [--region ]
 [--enable | --disable]
   
openstack endpoint create: error: the following arguments are required:
, 

(kolla-open) [stack@kolla-open kolla]$

Michel
___
ceph-users mailing list -- ceph-users@ceph.io
To unsubscribe send an email to ceph-users-le...@ceph.io

[ceph-users] Re: Replacing swift with RGW

[Eugen Block]

Hi,

this is not a ceph issue but your openstack cli command as the error  
message states.


Try one interface at a time:

openstack endpoint create swift public http://ceph-osd3:8080/swift/v1  
--region RegionOne swift
openstack endpoint create swift admin http://ceph-osd3:8080/swift/v1  
--region RegionOne swift
openstack endpoint create swift internal  
http://ceph-osd3:8080/swift/v1 --region RegionOne swift



Zitat von Michel Niyoyita :


Hello ,

Below are errors I am getting once I am trying to integrate swift with
Radosgateway.

From openstack side once i try to endpoint which will point to the
radosgateway :

(kolla-open) [stack@kolla-open kolla]$ openstack endpoint create
--publicurl http://ceph-osd3:8080/swift/v1 --adminurl
http://ceph-osd3:8080/swift/v1 --internal http://ceph-osd3:8080/swift/v1
--region RegionOne swift
usage: openstack endpoint create [-h] [-f {json,shell,table,value,yaml}]
 [-c COLUMN] [--noindent] [--prefix PREFIX]
 [--max-width ] [--fit-width]
 [--print-empty] [--region ]
 [--enable | --disable]
   
openstack endpoint create: error: argument : invalid choice: '
http://ceph-osd3:8080/swift/v1' (choose from 'admin', 'public', 'internal')

(kolla-open) [stack@kolla-open kolla]$

below are my /etc/ceph/ceph.conf file :

[client.rgw.ceph-osd3]
rgw_dns_name = ceph-osd3
host = ceph-osd3
keyring = /var/lib/ceph/radosgw/ceph-rgw.ceph-osd3/keyring
log file = /var/log/ceph/ceph-rgw-ceph-osd3.log
rgw frontends = civetweb port=10.10.29.110:8080 num_threads=100
rgw_keystone_url=http://10.10.29.150:35357
rgw_keystone_admin_user=admin
rgw_keystone_admin_password=admin
rgw_keystone_admin_tenant=admin
rgw_keystone_accepted_role=admin Member swiftoperator
rgw_keystone_token_cache_size=200
rgw_keystone_revocation_interval=300

[client.rgw.ceph-osd3.rgw0]
host = ceph-osd3
keyring = /var/lib/ceph/radosgw/ceph-rgw.ceph-osd3.rgw0/keyring
log file = /var/log/ceph/ceph-rgw-ceph-osd3.rgw0.log
rgw frontends = beast endpoint=10.10.29.110:8080
rgw thread pool size = 512

please note that my rgw_dns_name = ceph_osd3 with 10.10.29.110 as IP

and 10.10.29.150 all-in-one IP


Please crosscheck where I might make mistake and try to correct.

Best regards

Michel

On Mon, Aug 30, 2021 at 11:25 AM Etienne Menguy 
wrote:


Hi,

There are some information on Ceph documentation
https://docs.ceph.com/en/latest/radosgw/keystone/ <
https://docs.ceph.com/en/latest/radosgw/keystone/> .
- Use keystone as auth for RGW
- Create service and register your RGW as swift

Étienne

> On 27 Aug 2021, at 15:47, Michel Niyoyita  wrote:
>
> Hello ,
>
> I have configured RGW in my ceph cluster deployed using ceph ansible and
> create sub user to access the created containers and would like to
replace
> swift by RGW in the openstack side. Anyone can help on configuration to
be
> done in the OpenStack side in order to integrate those services. I have
> deployed OpenStack wallaby using Kolla-ansible on ubuntu 20.04. and ceph
> pacific 16.2.5 was deployed using ansible on ubuntu 20.04
>
> Kindly help for the configuration or documentation.
>
> Best Regards
>
> Michel
> ___
> ceph-users mailing list -- ceph-users@ceph.io
> To unsubscribe send an email to ceph-users-le...@ceph.io

___
ceph-users mailing list -- ceph-users@ceph.io
To unsubscribe send an email to ceph-users-le...@ceph.io


___
ceph-users mailing list -- ceph-users@ceph.io
To unsubscribe send an email to ceph-users-le...@ceph.io




___
ceph-users mailing list -- ceph-users@ceph.io
To unsubscribe send an email to ceph-users-le...@ceph.io

[ceph-users] Re: Replacing swift with RGW

[Michel Niyoyita]

Hello ,

Below are errors I am getting once I am trying to integrate swift with
Radosgateway.

From openstack side once i try to endpoint which will point to the
radosgateway :

(kolla-open) [stack@kolla-open kolla]$ openstack endpoint create
--publicurl http://ceph-osd3:8080/swift/v1 --adminurl
http://ceph-osd3:8080/swift/v1 --internal http://ceph-osd3:8080/swift/v1
--region RegionOne swift
usage: openstack endpoint create [-h] [-f {json,shell,table,value,yaml}]
 [-c COLUMN] [--noindent] [--prefix PREFIX]
 [--max-width ] [--fit-width]
 [--print-empty] [--region ]
 [--enable | --disable]
   
openstack endpoint create: error: argument : invalid choice: '
http://ceph-osd3:8080/swift/v1' (choose from 'admin', 'public', 'internal')

(kolla-open) [stack@kolla-open kolla]$

below are my /etc/ceph/ceph.conf file :

[client.rgw.ceph-osd3]
rgw_dns_name = ceph-osd3
host = ceph-osd3
keyring = /var/lib/ceph/radosgw/ceph-rgw.ceph-osd3/keyring
log file = /var/log/ceph/ceph-rgw-ceph-osd3.log
rgw frontends = civetweb port=10.10.29.110:8080 num_threads=100
rgw_keystone_url=http://10.10.29.150:35357
rgw_keystone_admin_user=admin
rgw_keystone_admin_password=admin
rgw_keystone_admin_tenant=admin
rgw_keystone_accepted_role=admin Member swiftoperator
rgw_keystone_token_cache_size=200
rgw_keystone_revocation_interval=300

[client.rgw.ceph-osd3.rgw0]
host = ceph-osd3
keyring = /var/lib/ceph/radosgw/ceph-rgw.ceph-osd3.rgw0/keyring
log file = /var/log/ceph/ceph-rgw-ceph-osd3.rgw0.log
rgw frontends = beast endpoint=10.10.29.110:8080
rgw thread pool size = 512

please note that my rgw_dns_name = ceph_osd3 with 10.10.29.110 as IP

and 10.10.29.150 all-in-one IP


Please crosscheck where I might make mistake and try to correct.

Best regards

Michel

On Mon, Aug 30, 2021 at 11:25 AM Etienne Menguy 
wrote:

> Hi,
>
> There are some information on Ceph documentation
> https://docs.ceph.com/en/latest/radosgw/keystone/ <
> https://docs.ceph.com/en/latest/radosgw/keystone/> .
> - Use keystone as auth for RGW
> - Create service and register your RGW as swift
>
> Étienne
>
> > On 27 Aug 2021, at 15:47, Michel Niyoyita  wrote:
> >
> > Hello ,
> >
> > I have configured RGW in my ceph cluster deployed using ceph ansible and
> > create sub user to access the created containers and would like to
> replace
> > swift by RGW in the openstack side. Anyone can help on configuration to
> be
> > done in the OpenStack side in order to integrate those services. I have
> > deployed OpenStack wallaby using Kolla-ansible on ubuntu 20.04. and ceph
> > pacific 16.2.5 was deployed using ansible on ubuntu 20.04
> >
> > Kindly help for the configuration or documentation.
> >
> > Best Regards
> >
> > Michel
> > ___
> > ceph-users mailing list -- ceph-users@ceph.io
> > To unsubscribe send an email to ceph-users-le...@ceph.io
>
> ___
> ceph-users mailing list -- ceph-users@ceph.io
> To unsubscribe send an email to ceph-users-le...@ceph.io
>
___
ceph-users mailing list -- ceph-users@ceph.io
To unsubscribe send an email to ceph-users-le...@ceph.io

[ceph-users] Re: Replacing swift with RGW

[Etienne Menguy]

Hi,

There are some information on Ceph documentation 
https://docs.ceph.com/en/latest/radosgw/keystone/ 
 .
- Use keystone as auth for RGW
- Create service and register your RGW as swift  

Étienne

> On 27 Aug 2021, at 15:47, Michel Niyoyita  wrote:
> 
> Hello ,
> 
> I have configured RGW in my ceph cluster deployed using ceph ansible and
> create sub user to access the created containers and would like to replace
> swift by RGW in the openstack side. Anyone can help on configuration to be
> done in the OpenStack side in order to integrate those services. I have
> deployed OpenStack wallaby using Kolla-ansible on ubuntu 20.04. and ceph
> pacific 16.2.5 was deployed using ansible on ubuntu 20.04
> 
> Kindly help for the configuration or documentation.
> 
> Best Regards
> 
> Michel
> ___
> ceph-users mailing list -- ceph-users@ceph.io
> To unsubscribe send an email to ceph-users-le...@ceph.io

___
ceph-users mailing list -- ceph-users@ceph.io
To unsubscribe send an email to ceph-users-le...@ceph.io