Re: [Chevelle-list] cowl screen
Be careful with the length of the screws you install. Years ago I ordered correct screws and they turned out to be either too long, or I installed them at the wrong angle. Either way, several extended too far and put a dimple into the outer sheetmetal. I didn't notice til I had 3 or 4 significant dimples. Paintless dent repair fixed them but it was aggravating. On Tue, Jul 21, 2009 at 3:53 PM, Dan Solomon wrote: > It attaches with screws. If your installing a GM screen on a GM hood you > could probably do it on the car. I put a repop screen on a Goodmark hood and > only one hole lined up. I had to drill the rest. If that is your situation > you will need to pull the hood. > > Thanks, Dan > -- > Sent using BlackBerry > > -- > *From*: harkema...@aol.com > *Date*: Tue, 21 Jul 2009 16:24:15 EDT > *To*: > *Subject*: [Chevelle-list] cowl screen > > wondering about the screen at the rear of the cowl hood on a 72 how it > attaches?- > sheet metal screws? hex head? clips? > does the hood have to come off to install it? > > > ** > A Good Credit Score is 700 or Above. See yours in just 2 easy steps! ( > http://pr.atwola.com/promoclk/100126575x1221823310x1201398722/aol?redir=http://www.freecreditreport.com/pm/default.aspx?sc=668072&hmpgID=62&bcd=JulystepsfooterNO62) > > -- Rick Schaefer 72 TPI El Camino
Re: [Chevelle-list] cowl screen
It attaches with screws. If your installing a GM screen on a GM hood you could probably do it on the car. I put a repop screen on a Goodmark hood and only one hole lined up. I had to drill the rest. If that is your situation you will need to pull the hood. Thanks, Dan -- Sent using BlackBerry -Original Message- From: harkema...@aol.com Date: Tue, 21 Jul 2009 16:24:15 To: Subject: [Chevelle-list] cowl screen wondering about the screen at the rear of the cowl hood on a 72 how it attaches?- sheet metal screws? hex head? clips? does the hood have to come off to install it? ** A Good Credit Score is 700 or Above. See yours in just 2 easy steps! (http://pr.atwola.com/promoclk/100126575x1221823310x1201398722/aol?redir=http://www.freecreditreport com/pm/default.aspx?sc=668072&hmpgID=62&bcd=JulystepsfooterNO62)
Re: [Chevelle-list] 454 will not start
Thanks everyone for all the help, if you are curious it was a module, i had a spare on hand and when i have time i will take it in and have it tested - just to see,,, someone told me that usually a coil will not burn out completely (will usually have some spark in it- but not enough to fire the engine- i had none) also i was told that turning on the ignition and holding a soldering gun (not iron) next to the cap and pulling the trigger will make the car fire and then you know its not your module.. also the rotor can fail with no visual signs and ground out your spark without sending it to the plugs-- but i did not try any of this i had the module out before i learned any of this... also heard that the pick-up plate can go bad too-? harlan ** A Good Credit Score is 700 or Above. See yours in just 2 easy steps! (http://pr.atwola.com/promoclk/100126575x1221823310x1201398722/aol?redir=http://www.freecreditreport.com/pm/default.aspx?sc=668072&hmpgID=62&; bcd=JulystepsfooterNO62)
[Chevelle-list] cowl screen
wondering about the screen at the rear of the cowl hood on a 72 how it attaches?- sheet metal screws? hex head? clips? does the hood have to come off to install it? ** A Good Credit Score is 700 or Above. See yours in just 2 easy steps! (http://pr.atwola.com/promoclk/100126575x1221823310x1201398722/aol?redir=http://www.freecreditreport .com/pm/default.aspx?sc=668072&hmpgID=62&bcd=JulystepsfooterNO62)