Re: [Chevelle-list] Anyone near Bristol Va. / Tenn.?
-Going with empty trailer to Chicago from Grand Rapids, Mi. Sunday and going from Grand Rapids, Mi. to Ohio empty Wednesday if anybody needs a lift. Tom B. Anyone around Bristol Va. have some time this weekend to look at a trailer and take some digital pictures for me? Thanks, Keith
Re: [Chevelle-list] Saginaw Parts
--- I have 2 4-speeds in Grand Rapids, Mi 49534 - Ryan Langstraat [EMAIL PROTECTED] wrote: Tom I noticed on team chevelles classifieds that you have some parts for sale. Email me off list when you get a second if you would please. Thanks Ryan [EMAIL PROTECTED]
Re: [Chevelle-list] Rivets for Grill - 66 Chevelle
---oh!! myrevits are made to be hammered - it's FACTORY Tom B.- mike f [EMAIL PROTECTED] wrote: Hammer's! On my new parts, I don't think so. One of my personal rules is not not use a Hammer or BFH on anything on this car. Not that I can answer about the rivets. However, I used Stainless Steel, 8-32 and or 10-24 hex cap screws with nylon inserted locking nuts on my grille center. Mike --- Larry Shouse [EMAIL PROTECTED] wrote: Thanks. I'll check into doing it what way. Larry - Original Message - From: [EMAIL PROTECTED] To: Chevelle-list@chevelles.net Sent: Thursday, January 05, 2006 9:54 PM Subject: Re: [Chevelle-list] Rivets for Grill - 66 Chevelle i have used these rivets use a rag and a hammer and a dolly rag over the part that is to be visible and preferably a body hammer because of the large face if you know someone with a brake lineing re riviter then it may work but short of that this is the only way i know of i did it on the car and it works out good as long as you pay attn to what you are doing __ Yahoo! DSL Something to write home about. Just $16.99/mo. or less. dsl.yahoo.com
Re: [Chevelle-list] Manual steering box lube?
- Why is a steering box need better than what it's met to have, gear lube. Tom B. --- [EMAIL PROTECTED] wrote: Hi, Since the subject of manual brakes and steering boxes came up. I was wondering if there's something better to put in the steering box besides plain 'ol gear oil? Pete Geurds Douglassville, PA
Re: Re: [Chevelle-list] what year is yours?
1964 2 door wagon --half done, no money 65 El Camino - half done, no money 64 2 door post project -, no money 67 El camino half done and so on and so on. There is a pattern here.. Tom B. Grand Rapids, Mi. Subject: Re: [Chevelle-list] what year is yours? At 09:21 PM 12/28/2005, you wrote: 64 Elky 66 elky 66 Malibu Seems like there are not very many 64 and 65 chevelle's or elkys that are owned by people on the list . What do most people have , by year. Just for my information. Bob 64SS chevelle 65SS chevelle
Re: [Chevelle-list] wire ID please
John the orange is for the heater blower, the green with insulaion casing is temp. and the last is for the brakes by the master cly. Tom B. From: John Nasta [EMAIL PROTECTED] Date: 2005/09/25 Sun PM 02:31:31 EDT To: The Chevelle Mailing List Chevelle-list@chevelles.net Subject: [Chevelle-list] wire ID please I have three wires in the front that I am still not sure what they are for. The second one I think is for the temp sender but the other two I have no idea. Please take a look here and let me know what you think: http://johnnasta.com/wires/ This is a 1969 El Camino. Note that the 3rd one is hot when the key is on. Click the thumbnails for larger images. Thanks, John Nasta
Re: Re: [Chevelle-list] GM Cars
Got one in Grand Rapids, Mi Tom B. From: [EMAIL PROTECTED] Date: 2005/08/31 Wed AM 02:35:04 EDT To: Chevelle-list@chevelles.net Subject: Re: [Chevelle-list] GM Cars im looking for a 68 to 72 nova for my 14 year old son that needs work and a motor
Re: Re: [Chevelle-list] GM Cars
OH Ok From: [EMAIL PROTECTED] Date: 2005/08/31 Wed PM 04:53:50 EDT To: Chevelle-list@chevelles.net Subject: Re: [Chevelle-list] GM Cars tom thank you but u how much lol im comin from ga
Re: RE: [Chevelle-list] Steering Universal (POT) Joint (1972)
John the kit you show,is it a kit with the joint or just the bolts? Tom B. From: John Nasta [EMAIL PROTECTED] Date: 2005/07/21 Thu AM 11:36:42 EDT To: The Chevelle Mailing List Chevelle-list@chevelles.net Subject: RE: [Chevelle-list] Steering Universal (POT) Joint (1972) The rag joint? I have some in stock ( SW301 http://www.oldcarnetwork.com/Merchant2/merchant.mv?Screen=PRODProduct_Code =SW301 ). John Nasta -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Classic Cars Sent: Thursday, July 21, 2005 11:29 AM To: Chevelle-list@chevelles.net Subject: [Chevelle-list] Steering Universal (POT) Joint (1972) Hello: Does anyone know of a supplier for the Universal (POT) Joint that goes between the steering column and the shaft that connects to the Flexible Coupling for a 1972? Thanks! Jessie _ Start your day with Yahoo! - make it your home page http://us.rd.yahoo.com/evt=34442/*http://www.yahoo.com/r/hs
Re: Re: [Chevelle-list] special request
Thoughts and prayers to you and family. Tom B. From: mike f [EMAIL PROTECTED] Date: 2005/07/21 Thu PM 09:11:18 EDT To: The Chevelle Mailing List Chevelle-list@chevelles.net Subject: Re: [Chevelle-list] special request Brian, we will keep you in our thoughts. I can appreciate as many of us have had surgery and stuff. Be of good cheer! We live in wonderful times in terms of medicine. Thank, the Lord you live in the U.S. get back to us soon. ok? mike --- Brian Knight [EMAIL PROTECTED] wrote: Hi guys, over the last couple of years since I have been a part of this list, I have learned more from you than I can put into words. Every day it seems I learn something new or at least get to have a good laugh, especially from some of the ebay listings that are pointed out here. I consider you all family and really appreciate the advice and help I have recieved. Now for the request part. Tomorrow (Friday) I have to have a heart catheterization (angioplasty) done and my family and I would greatly appreciate it if any of you would remember us in your thoughts and prayers. Chevelle content: If anything were to go wrong, I would not be able to drive the Chevelle any more. Thanks to all of you, Brian _ Express yourself instantly with MSN Messenger! Download today - it's FREE! http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/ __ Do you Yahoo!? Yahoo! Mail - Find what you need with new enhanced search. http://info.mail.yahoo.com/mail_250
Re: Re: [Chevelle-list] Stroked 396
You need to clearance the block for the rods. Tom B. From: [EMAIL PROTECTED] Date: 2005/07/19 Tue AM 06:40:04 EDT To: Chevelle-list@chevelles.net Subject: Re: [Chevelle-list] Stroked 396 Anyone have any opinions , experience putting a crank and rods out of a 454 into a 396 . Just wondering if this is a combo or not , balancing and all ? Rick
Re: RE: [Chevelle-list] 4 Speed Fill Bolt/Plug
Ok guys what it is,it's a pipe plug and if it's stuburn and you can get a pipe wrench on the pipe plug go for it. Use the big guns and reefe on the pipe wrench that's what they're for. From: Krister Meister [EMAIL PROTECTED] Date: 2005/05/27 Fri AM 09:44:24 EDT To: The Chevelle Mailing List Chevelle-list@chevelles.net CC: Chevelle-list@chevelles.net, [EMAIL PROTECTED] Subject: RE: [Chevelle-list] 4 Speed Fill Bolt/Plug It's a threaded plug with four sides. As already mentioned you would need an 8 sided socket (9/16 ?) and would trust this method over an open end wrench since it is not moving. Try some penetrating oil then heat. Work it back and forth. Once off, the trans lube should be level with the bottom of the fill hole. When reinstalling marginal tight is good enough. Krister Meister Bloomingdale, IL '66 SS #'s Dale [EMAIL PROTECTED] To: 'The Chevelle Mailing List' Chevelle-list@chevelles.net Sent by:cc: [EMAIL PROTECTED]Fax to: evelles.net Subject: RE: [Chevelle-list] 4 Speed Fill Bolt/Plug 05/27/2005 07:15 AM Please respond to The Chevelle Mailing List And if the fill plug hasn't been out in quite a while, it could be a real bear to remove. Dale McIntosh -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Herb Lumpp Sent: Friday, May 27, 2005 4:38 AM To: The Chevelle Mailing List Subject: RE: [Chevelle-list] 4 Speed Fill Bolt/Plug Hi Tom, It sounds like you need to get a square socket (4 sided) vice a hexagon (more common 6 sided). Herb Lumpp http://users.adelphia.net/~hlump/index.htm -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Mark Schwartz Sent: Friday, May 27, 2005 1:35 AM To: Chevelle-list@chevelles.net Subject: RE: [Chevelle-list] 4 Speed Fill Bolt/Plug HI All, I have a muncie 4 speed in my 69 chevelle. I want to verify that the fluid level is at the proper height. I went tonight to take off the cover for the fill hole. I can't figure out if it's a press in plug or a bolt in. The cover looks similar to a nut but with a stem on it. Neither fits a bolt and with a vise grip using moderate pressure it didn't move. Can someone tell me how to get this bolt/plug off? thanks Thomas
[Chevelle-list] vacuum hoses
What is the lay-out of va. hoses for a 1970 Chevelle, trans,brakes,distributor,-carb or manifold connections,porterd or manifold fittings? Thanks Tom B.
Re: Re: [Chevelle-list] For a living...
Brickmason Tom Blawkamp Grand Rapids, Mi.
Re: Re: [Chevelle-list] Fw this to 10 people and you will get..Or how to
Where is it located and do you have pictures? Thanks Tom B. From: [EMAIL PROTECTED] Date: 2005/03/21 Mon PM 06:55:27 GMT To: Chevelle-list@chevelles.net Subject: Re: [Chevelle-list] Fw this to 10 people and you will get..Or how to Any one interested in a 1972 Ss nova for sale redone
Re: [Chevelle-list] 4 bolt main small block 400 FS
Do you still have your 400 motor? Tom B. From: Zieg72 [EMAIL PROTECTED] Date: 2004/11/27 Sat PM 03:30:13 GMT To: The Chevelle Mailing List Chevelle-list@chevelles.net Subject: [Chevelle-list] 4 bolt main small block 400 FS I am cleaning out the garage and offering For Sale this 4 Bolt main small block 400. I got this engine in a trade. It ran well but has been sitting on an engine stand for a while now. It does turn over with no problems. I am in NW Indiana, 50 miles SE of Chicago. $300
Re: Re: [Chevelle-list] transporting car
Sure Jim I can use the number, thanks Tom B. From: Jim Dos [EMAIL PROTECTED] Date: 2004/11/18 Thu PM 03:52:56 GMT To: The Chevelle Mailing List [EMAIL PROTECTED] Subject: Re: [Chevelle-list] transporting car a local iowa guy just hauled me an el camino from utah back to iowa ...cost me 650 bux...but it got done fast- less than 2 wks from the time i made the arrangements thru a broker...now I can deal with him direct.. don't know if that helps you much or not.. i was trying to get it done cheap by hireing a flatbed local freight company to load it for a backhaul... but he wanted to stick me more than this guy charged..so that didn't work out and I'm happier now that I did it this way and got it done... if you want his number , let me know. Jim - Original Message - From: [EMAIL PROTECTED] To: The Chevelle Mailing List [EMAIL PROTECTED] Sent: Wednesday, November 17, 2004 10:13 PM Subject: Re: [Chevelle-list] transporting car still looking for transportation. From: [EMAIL PROTECTED] Date: 2004/11/14 Sun AM 06:13:19 GMT To: [EMAIL PROTECTED] Subject: [Chevelle-list] transporting car I need to get a car from Plattsmouth Ne. to Grand Rapids, Mi. Any help? Thanks Tom B.
Re: [Chevelle-list] transporting car
still looking for transportation. From: [EMAIL PROTECTED] Date: 2004/11/14 Sun AM 06:13:19 GMT To: [EMAIL PROTECTED] Subject: [Chevelle-list] transporting car I need to get a car from Plattsmouth Ne. to Grand Rapids, Mi. Any help? Thanks Tom B.
[Chevelle-list] transporting car
I need to get a car from Plattsmouth Ne. to Grand Rapids, Mi. Any help? Thanks Tom B.
Re: RE: [Chevelle-list] 67 Chevelle BB Misc
I need old set of headers for big block. Tom B. From: Phil Adams [EMAIL PROTECTED] Date: 2004/10/27 Wed PM 02:08:48 GMT To: 'The Chevelle Mailing List' [EMAIL PROTECTED] Subject: RE: [Chevelle-list] 67 Chevelle BB Misc Clint, I'm in the So Cal area. Stainless or ceramic coated headers are fine with me. As for the Ron Davis Radiator set up, does he have a website, catalog or contact phone numbers for Sanders Ron Davis? Thanks Phil Adams _ From: Clint Hooper [mailto:[EMAIL PROTECTED] Sent: Tuesday, October 26, 2004 10:56 AM To: The Chevelle Mailing List Subject: Re: [Chevelle-list] 67 Chevelle BB Misc 2 1/4 headers are way too big for a 427. My choice would be some 1 7/8 Sanderson intermediates,if you want something that will give maximum ground clearance. Don't understand why you don't want stainless headers,as it seems like funds aren't a problem. Stainless Works can build you a pair of 1 3/4,1 7/8,or 2 tubes that will tuck up tightly for around $600. Heck,a pair of Sandersons will cost over $500. As for a radiator choice,my first pick would a Ron Davis set-up with dual electric fans. Are you anywhere near Houston,Tx? Clint Hooper HH Custom,owner A.C.E.S. #1650 1969 El Camino Protourer http://dalesplace.com/misc/friends/clint/clint_hooper.htm - Original Message - From: Phil mailto:[EMAIL PROTECTED] Adams Hey guys, I have a 67 Chevelle with a 427 and want to change a couple of things. The current headers are 2 1/4 tube and I want to change to a a Shorty?, something that is closer to the block, stays off of the steering and drop down out of the engine compartment. Also, there are a number of other items I am changing and would like input on the who has the best value / quality for the following items below, I also entered the best value / price I have be able to find, if it sounds acceptable your input is appreciated: * Billet pulley systems - SW Specialties $575.00 polished * 2 Steel cowl hood - OPG $489.00 or True Classics $465.00 * Aluminum radiator with trans cooler combination - The Fan Man $849.00 Polished with stock hrdwr, duel fans. Thermal fan switch $75.00 * Stainless Steel exhaust system, pipes not headers * Shorty headers * Chrome Pwr String pump, Chrome Master Booster set up. Thanks Phil Adams
Re: Re: [Chevelle-list] 67 Chevelle BB Misc
What size primary pipes? From: [EMAIL PROTECTED] Date: 2004/10/27 Wed PM 03:36:40 GMT To: [EMAIL PROTECTED] Subject: Re: [Chevelle-list] 67 Chevelle BB Misc Have a set of B.B. haeders from a 67SS.Let me know if interested
Re: Re: [Chevelle-list] 67 Chevelle BB Misc
looking for 2 1/4 for 540 drag 67 El Camino From: [EMAIL PROTECTED] Date: 2004/10/27 Wed PM 05:13:44 GMT To: [EMAIL PROTECTED] Subject: Re: [Chevelle-list] 67 Chevelle BB Misc 1 7/8 primary w/ 3 collectors
Re: [Chevelle-list] Car Hauler Length
20 will fit,but no extra room. 24'works best for me. Room for stuff up front. What ever you decide ,get the wide body not the narrow body. Tom B. From: [EMAIL PROTECTED] Date: 2004/10/05 Tue AM 12:10:46 GMT To: [EMAIL PROTECTED] Subject: [Chevelle-list] Car Hauler Length I have a 70 Chevelle and I am looking at buying an enclosed trailer. I am looking at the ones with 5200 lb axles but I am not sure about the length. Anybody have any comments 20/22/or 24 ft long